heating elements for water heating

Komentáře

Transkript

heating elements for water heating
HEATING ELEMENTS FOR WATER HEATING
output 500W – 33.000 W
water and similar liquid heating
Specification:
Heating elements for water and similar liquid heating with no danger of medium carbonization on the
surface of the unit. It consists of heating rods of desired shape and parameters and of a connecting
flange according to application of use.
Most common materials of the rods are copper, surfaced copper and various classes of stainless steel.
The rods may also be protected by teflon plating. The flanges are made of brass, steel of various lasses
of stainless steel.
The heating rods loading depends on the liquid flow, typically ranging between 6-9 W/cm 2, particular
applications may however require adjustments for either lower or higher loadings.
Power supply may be chosen according to customers requirements: 110V, 230V, 400V, 480V, 500V,
typically 1x230V or 1x400V (for one rod design) and 1x230V, 3x230V, 1x400 or 3x400V (for multiple rod
designs).
The IP protection is ranging from IP 00 for elements designed to be mounted in other mechanisms up
to IP 68 for separate units. Parts of the heating elements can also be supplied in a explosive
environment design along with the Ex certificate.
Depending on customers requirements the heating elements may also be supplied in variations such as
atypical rod shapes, individual flange connections, other materials or surfacings.
Typical application of use :
- eletric appliances – boilers, kettles, washing machines, dishwashers, radiators, coffee machines,
deepfryers,...
- food industry and gastronomy – water heaters, heating containers, stem closets, deepfryers
- transport and industry– cooling liquid and gear oils heating in motor vehicles during winter operation
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole
Type: 5107; 14006950; 16.xxx – bended type heating element
The heating element consists of the heating rod connected to an oval flange. Outlets
are equipped with flat pins. Designed for direct water heating in el. water heaters,
must always be submerged up to the flange during operation. M6 threaded pins are
used for installation. Sealing is ensured by the rubber gasket, that comes as a part of
the flange.
Heating rod: copper - nickel-platted
Flange: brass – nickel-plated, rubber gasket included
Pmax: 6 bar
Type
Supply
(V)
Output
(W)
L
(mm)
L2
(mm)
5107/7
140695070
16.121
230
850
170
94
5107/1
140695010
16.102
230
1000
205
121
5107/8
140695020
16.131
230
1350
230
146
5107/3
140695030
16.141
230
1600
330
236
5107/9
1406950740
16.151
230
1750
290
213
5107/6
140695060
16.161
230
2000
325
208
5107/5
140695050
16.171
230
2400
400
313
Thread
Oval flange
20x50mm
Type:5101 / 5102 ; 14010970; 40.xxx – Threaded heating element
Heating element consists of one heating rod connected to a brass head
(M48x2/ G6/4“). Heating rod is terminated by connecting terminals with M4 bolts, used
for inlet cabel connection. Designed for direct water and similar liquids heating (boilers),
must be always submerged up to the head during operation. It is recommended to use
copper, klingerit or other appropriate sealing under the thread.
Heating rod: copper - nickel-platted
Flange: brass – nickel-plated
Pmax: 6 bar
Supply
(V)
Type
L2
Output
L
(mm
(W)
(mm)
)
5101/011 1401097010
40.800
230
800
285
5101/013 1401097020
40.1000
230
1000
370
5102/011 1401097030
40.1600
230
1600
293
5101/018 1401097040
40.2000
230
2000
353
5102/012 1401097050
40.2400
230
2400
363
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
220
Thread
M48x2
G6/4“
300
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole
Type: 5144; 14011900; 40.xxx – Threaded heating element IP 44
Heating element consists of three U-shaped heating rods connected to the brass head
with cover (IP 54) with el. bushing PG13,5. Flange mounting hexagonal of size OK 65.
Designed for drect water and silmilar liquid heating in water heaters, el. boilers etc.
Must be submerged up to the head during all operations, It is recommended to use
copper, klingerit or other appropriate sealing under the thread. Supplier with 230V,
3x230V, 400V and 3x400V power supply as the table below shows, on customers
request.
Heating rod: copper - nickel-platted / stainless steel
Flange: brass – nickel-plated / stainless steel
Pmax: 10 bar
Atypical customization: individual connections: clamp, flanges in accordance with DIN,
other threads,...
heating rods customizations – length, diameter, surfacing
el. connection – other voltage, power supply
Supply
(V)
Power
(W)
L
(mm)
5144/1 1401190091
230/3x230
1500
148
5144/2 1401190081
230/3x230
2000
178
5144/3 1401190010 40.911
230/3x230
2400
203
5144/4 1401190020 40.921
230/3x230
3000
240
5144/5 1401190030 40.931
230/3x230
4000
303
5144/6 1401190040 40.941
230/3x230
4500
333
5144/7 1401190050 40.951
230/3x230
6000
428
5144/8 1401190060 40.961
400/3x400
7500
520
Type
Thread
M48x2
G6/4“
Type: 14089; 02.xxx – Washing machine heating element
Heating element designed for direct water heating in automatic washers.
Flat-ovalhole 18x70 for installation, sealing with one nut M8. Copper heating rods or
stainless steel. Must be submerged during all operations.
Heating rods: copper – nickel platted / stainless steel
Flange: steel including the rubber gasket
Pmax: 6 bar
Individual customizations: length, shape, output
Type
Supply
(V)
Output
(W)
L
(mm)
1408990060
02.1750
230
1750
190
1408990040
02.2000
230
2000
225
1408990100
02.2500
230
2500
180
1408990150
02.2800
230
2800
300
1408990050
02.3000
380
3000
370
1408990080
02.4000
380
4000
370
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
L2
(mm)
Flange
220
Oval flange for
hole 70x18mm
300
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole
Type: 309/989; K048,052 – Industrial washing machine heating
element
Heating elements designed for direct water heating in industrial washers, consists of
two U-shaped heating rods and a flange with rubber gasket, designed for 70x18 mm
hole. Sealing with one nut M8. Copper heating rods or stainless steel. Must be
submerged during all operations. Should be connected to nominal voltage according to
the wiring diagram of appliances, they are used in.
Heating rods: copper – nickel platted / stainless steel
Flange: steel including the rubber gasket
Pmax: 6 bar
Individual customizations: length, shape, output
Supply
(V)
Output
(W)
L
(mm)
Material
230
2x2000
300
Cu
309
230
2x2000
350
Cu
309
230
2x2000
470
Cu
230
2x3000
470
Cu
230
2x2500
350
St.Steel
Type
309
K052
309
K048
989
Thread
Oval flange for
hole 70x18mm
Type: 14520 – Dish washer heating element
Heating element designed for dish washers, products of ALBA Hořovice company.
Heating rods are made of stainless steel, flange of brass.
Heating rods: stainless steel
Flange: brass
Pmax: 6 bar
Type
Supply
(V)
Output
(W)
L
(mm)
1452090000
3x230
3x2000
326
1452090010
3x230
3x1333
326
1452090030
3x230
3x2000
326
Hole only
1452090040
3x230
3x2000
326
With well
1452090050
3x230
3x1333
326
Cu-Ms/Ni
1452090060
3x400
3x3000
440
With well
1452090070
3x400
3x1333
326
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
Remark
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole
Type: 14063 / 4034 – Flange heating element up to 15 kW
Heating element designed for direct water and similar liquid heating. It must all be submerged
during all operations. Max. permissible pressure 1 MPa. Heating elements with length longer
than 700mm should be supported. Flange heating elements consist three heating rods and of
steel / stainless steel flange in accordance with ČSN / DIN / or else on customer requirements.
Ceramic terminal board is protected by steel cover with el. bushing GP21/18, ensuring IP 42.
Heating rods: Copper / Steel / Stainless steel AISI 304 / AISI 316
Flange: Galvanized steel / Stainless steel AISI 304 /316
Pmax: 1,0 MPa
Standard design
Type
Supply
(V)
Output
(W)
L
(mm)
Rod material
1406390010 403491010
3x400
7500
500
copper
1406390020 403491020
3x400
9000
500
copper
1406390030 403491050
3x400
12000
700
copper
1406390040 403491070
3x400
15000
800
copper
1406390060
3x480
7500
500
copper
1406390060
3x480
9000
700
copper
403493010
3x400
7500
500
stainless steel
403493020
3x400
9000
500
stainless steel
403493050
3x400
12000
700
stainless steel
403493070
3x400
15000
800
stainless steel
Connecting flange dimensions in accordance with PN
PN
(MPa)
D
(mm)
D1
(mm)
A
(mm)
Screw
Testing
pressure
MPa
1,0
182
158
14
6xM12
1,3
Customer modifications:
Supply: 120, 230, 400, 480, 500 V
Length and shape of the rods: according to customer requirements
Heating rods material: Copper / Steel / Stainless steel AISI 304 / AISI 316 / teflon-platted
Flange design: according to ČSN / DIN, individual customizations
Flange material: galvanized steel / stainless steel AISI 304 / AIS 316
Atypical modifications: higher IP, in-built el. control, in-built thermostat control, limit switches,
etc.
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole
Typ: 14071/ 4407 – Flange heating element up to 33 kW
Heating element designed for direct water and similar liquid heating. It must all be
submerged during all operations. Max. permissible pressure 6,4 MPa. Heating
elements with length longer than 700mm should be supported. Flange heating
elements consist three heating rods and of steel / stainless steel flange in accordance
with ČSN / DIN / or else on customer requirements. Ceramic terminal board is
protected by steel cover with el. bushing GP36/28, ensuring IP 42.
Heating rods: Copper / Steel / Stainless steel AISI 304 / AISI 316
Flange: Galvanized steel / Stainless steel AISI 304 /316
Pmax: 0,6 / 1,0 / 2,5 / 6,4 MPa
Standard design
Type
Supply
(V)
Output
(W)
L
(mm)
PN
(MPa)
Rod
material
Copper
14071190010
440790010
3x400
15000
505
0,6
14071190020
440790020
3x400
18000
575
0,6
Copper
14071190030
440790050
3x400
24000
735
0,6
Copper
14071190040
440790060
3x400
30000
870
0,6
Copper
14071190050
440790110
3x500
15000
505
0,6
Copper
14071190060
440790160
3x500
30000
870
0,6
Copper
14071190070
440790210
3x400
15000
505
1,0
Copper
14071190080
440790220
3x400
18000
575
1,0
Copper
14071190090
440790250
3x400
24000
735
1,0
Copper
14071190100
440790260
3x400
30000
870
1,0
Copper
14071190110
440790310
3x500
15000
505
1,0
Copper
14071190120
440790360
3x500
30000
870
1,0
Copper
0
3
–
–
determines material heating rods-copper
determines stainless steel AISI 304
heating rods
Connecting flange dimensions in accordance with PN
PN
(MPa)
D
(mm)
D1
(mm)
A
(mm)
Screw
Testing
pressure
MPa
0,6
260
225
20
8xM16
0,78
1,0
280
240
24
8xM20
1,3
2,5
270
220
22
8xM24
3,25
6,4
295
240
30
8xM27
8,3
Customer modifications:
Supply: 120, 230, 400, 480, 500 V
Length and shape of the rods: according to customer requirements
Heating rods material: Copper / Steel / Stainless steel AISI 304 / AISI 316 / teflonplatted
Flange design: according to ČSN / DIN, individual customizations
Flange material: galvanized steel / stainless steel AISI 304 / AIS 316
Atypical modifications: higher IP, in-built el. control, in-built thermostat control, limit
switches, etc.
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole
Type: 1701 – Perpendicular galvanic heating elements
Heating elements consist of a coating (silicious glass or noble steel), ceramic heating
insertion and water resistant el. terminal board. Min. submerge level is always marked
on the coating, Given there is no sign of such mark, the element must all be
submerged while heating. El. terminal board is made of polypropylene, water resistant
with IP 65 and also resistant to the heated medium as well as its vapours.
Heating rods AISI 317Ti, AISI 304, Porcelain, Teflon, Titan, Boron-oxide glass
Type
Supply
(V)
Output
(W)
L
(mm)
Lt
(mm)
D
(mm)
Coating material
1701590010
3x400
1500
600
400
54
AISI317Ti
1701590020
3x400
3000
800
600
54
AISI317Ti
1701590040
3x400
4500
1270
1070
54
AISI317Ti
1701790010
3x400
1500
600
400
54
AISI304
1701790020
3x400
3000
800
600
54
AISI304
1701790040
3x400
4500
1270
1070
54
AISI304
1701290010
3x400
1500
595
370
48
Porcelain
1701290020
3x400
3000
785
560
48
Porcelain
1701290050
3x400
4500
1280
1070
48
Porcelain
1701490010
3x400
1100
600
400
54
Teflon
1701490020
3x400
1800
800
600
54
Teflon
1701490030
3x400
3300
1270
1070
54
Teflon
1701190010
3x400
1500
600
400
51
Titan Gr 2
1701190020
3x400
3000
800
600
51
Titan Gr 2
1701190040
3x400
4500
1270
1070
51
Titan Gr 2
1701890010
3x400
1500
600
400
50
Boron-oxide glass
1701890020
3x400
3000
800
600
50
Boron-oxide glass
1701890040
3x400
4500
1270
1070
50
Boron-oxide glass
1701390010
3x400
1500
600
400
50
Quartz
1701390020
3x400
3000
800
600
50
Quartz
1701390040
3x400
4500
1270
1070
50
Quartz
Type: 1705
– Shaped galvanic heating elements
Heating elements are shaped from long heating rods with flat-oval or round sections. The
bottom part of rods can follow very atypically shaped tank bottoms. Outlets can be protected
by PE head, Al box or rubber head continuously converting into cabel.
Heating rods: stainless steel AISI 304 / AISI 316Ti / teflon-platted stainless steel
Type
Supply
(V)
Output
(W)
1408990060
According to
requirements
1408990040
Dle požadavků
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
L
(mm)
Coating material
D8,5mm, max. 4m in
straight mode
AISI 316Ti
11,5x6,2mm, max. 6m
in straight mode
AISI 304
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole
Type: RFA – Threaded heating elements in ATEX design
Threaded heating elements in ATEX design are suitable into explosive environments.
Alluminium head can be fitted with up to two el. bushings. The head meets
requirements of Ex IICT4-T6, IP 67. They can be fitted with many types of connecting
threads, ussually 1¼, 2, 2¼ ´´ Made of brass or stainless steel AISI 316. Round
section 8mm heating rods are supplied in 825. The connecting flange can either be
right at the alluminium head or can be remotely separated.
Atex certificate in accordance with regulation ATEX94/9/EC
Output designs up to 18 0000 W
Max. voltage: 690V
Heating rods: Incoloy 825
Flange: Brass / Stainless steel AISI 316
Connecting thread: 1¼, 2, 2¼ ´´
Type
Supply
(V)
Output
(W)
L
(mm)
RFA-0,50-11Q
230
500
280
Incoloy 825
RFA-6-16-B
3x230
6000
406
Incoloy 825
RFA-2-23-BNS
230
2000
590
Incoloy 825
RFA-111
230
1000
280
Incoloy 825
RFA-211
230
2000
280
Incoloy 825
RFA-311
3x230
3000
280
Incoloy 825
RFA-330
3x230
3000
762
RFA-616
3x400
6000
406
RFA-630
3x400
6000
762
Incoloy 825
RFA-916
3x400
9000
406
Incoloy 825
RFA-923
3x400
9000
584
Incoloy 825
RFA-926
3x400
9000
660
Incoloy 825
RFA-1223
3x400
12000
584
Incoloy 825
RFA-1233
3x400
12000
838
Incoloy 825
Flange
Coating material
1 ¼´´
2´´
2 ¼´´
Incoloy 825
Incoloy 825
Type: FP – Flange heating elements in ATEX design
High-powered flange heating elements in ATEX design are suitable for all industrial
applications in explosive environments. They are supplied according to individual
requirements of the customer.
Application: ATEX EX 11 2 G/D, temperature class T1-T6
Protection: IP 66-67
Output designs up to 1000 kW
Max. voltage 690V
Heating rods: Incoloy 825, Inconel 625, Stainless steel AISI 316 / 316L /321
Flange: Stainless steel AISI 316 / 316 L, flange diamater: 150-1000 mm
Max submerged length 3665 mm
Type: RH -
Room heating element in ATEX design
Room heating elements in ATEX design are suitable for applications, where air
heating is required in explosive environments. The alluminium head can be fitted
with up to two el. bushings. The head meets the requiremets of Ex IICT4-T6,
according to design. Supplied according to individual customer requirements.
Atex certificate in accordance with regulation ATEX94/9/EC
Protection: IP 66-67
Max. voltage: 690V
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole

Podobné dokumenty

Komfortní snímač diferenčního tlaku

Komfortní snímač diferenčního tlaku materiál 15HM(SO) nebo nerez SS316 (S)-specifikujte, pouze pro připojení typu P sada vsuvky s maticí a těsněním pro připojení na impulsní potrubí ø12 a ø14 mm, materiál 15HM(SO) nebo nerez SS316 (S...

Více

Algoritmus likvorologického vyšetření- nejen u Lymeské

Algoritmus likvorologického vyšetření- nejen u Lymeské Algoritmus likvorologického vyšetření- nejen u Lymeské boreliozy Ondřej Sobek, Pavel Adam, Lenka Hajduková Laboratoř pro likvorologii a neuroimunologii Topelex s.r.o., referenční pracoviště SEKK pr...

Více

stáhnout - Backer Elektro CZ

stáhnout - Backer Elektro CZ Topné těleso je složeno ze tří topných větví tvaru U, zapájených do hlavice Ag pájkou. Každá větev má třetinu celkového příkonu. Hlavice je opatřena víkem s ucpávkovou vývodkou AP 16/12, což zajišť...

Více

SKLÍČIDLA A LíCNÍ DESKY SILOVÁ SKLÍČIDLA A HYDRAULICKÉ

SKLÍČIDLA A LíCNÍ DESKY SILOVÁ SKLÍČIDLA A HYDRAULICKÉ to až do velikosti 1000mm tuhost a odolnost vůči opotřebení, lépe odolává silám vzniklých ■■ Naši konstruktéři jsou připraveni provádět změny konstrukce při obrábění a tím prodlužuje i životnost s...

Více

1MJ7 - Elektromotory

1MJ7 - Elektromotory Nevýbušné trojfázové nízkonapěťové asynchronní motory s kotvou nakrátko řady 1MJ7 jsou určeny k pohonu průmyslových zařízení, např. ventilátorů, čerpadel a pod. pro použití v prostorech, ve kterých...

Více

PTFE / PFA linEd PiPEs And FiTTings din 2848 TECHNICAL GUIDE

PTFE / PFA linEd PiPEs And FiTTings din 2848 TECHNICAL GUIDE should be provided. When pipes are in service for the first time, air or water trapped inside at the moment of assembling may escape through the vent holes. It is recommended, when undertaking peri...

Více

General dimensions of open-die forgings

General dimensions of open-die forgings Commonly applied heat treatment:

Více

Sklíčidla silová s ovládáním strojním (katalog 2015)

Sklíčidla silová s ovládáním strojním (katalog 2015) ■■ Nevyváženost G 6,3 ■■ Sklíčidla o velikosti 500mm a více jsou vybavena T-drážkami

Více