1) Pre-polishing 2) Spray-on 3) Polish
Transkript
1) Pre-polishing 2) Spray-on 3) Polish
HeIX's innovative nano-structure provides an optimal coating on the base without affecting the macro-structure. This significantly reduces the friction coefficient, considerably improving sliding properties. 1) Pre-polishing Pre-polish the base using the yellow side of the Dual Pad. 2) Spray-on Pre-polish the base using the yellow side of the Dual Pad.From a distance of around 10 cm, spray TOKO HelX (Warm or Cold) in a thin, even coating then leave to dry completely. 3) Polish After drying, polish the base well using the white side of the Dual Pad. The TOKO Polishing Brush is often used to lightly brush out the base for an extra polish at the starting line. Tip: For even better performance on long runs over 25 km, apply a "basic treatment" using JetStream powder or Bloc.