IDD, 50-Quark 336 Camera Core, 35mm-f1.2

8
7
6
5
3
4
DWG NO.
50-336 35mm-f1.2
ZONE
NOTES: UNLESS OTHERWISE SPECIFIED
1
REV
1
100
REVISIONS
DESCRIPTION
REV
P01
100
1. INDICATED DIMENSIONS ARE FOR AN ARRAY SIZE OF 336x256.
SH
DATE
PRELIMINARY RELEASE
RELEASED PER ECN 120010
APPROVED
08/23/2012
4/29/2013
2. CONECTOR INTERFACE: SAMTEC STF-30-1.50-L-D-P-TR. MATING
CONNECTOR P/N SS4-30-3.50-L-D-K-TR. FOR PIN-OUT DESIGNATIONS
SEE QUARK CAMERA USERS MANUAL.
D
D
3. INDICATED ALLOWABLE TRAVEL FOR FOCUS.
4. INDICATED TOLERANCES APPLY TO CAMERA MOUNTING SURFACES ONLY.
OTHER SURFACES ARE CAST AND HAVE DRAFT.
56.12±0.50
2.209±0.020
5. CAMERA WEIGHT NO LENS 13.8 GRAMS, LENS WEIGHT, 35mm-f1.2: 228.1 GRAMS.
TOTAL CAMERA WEIGHT: 241.9 GRAMS.
3
6. PREFERABLE MOUNTING SURFACE FOR BEST CAMERA THERMAL PERFORMANCE
AND IMAGE UNIFORMITY.
44.24±0.50
1.742±0.020
A
3
35mm-f1.2 HAR COATING
FoV (HxV) 336x256 = 9.3°x7.1°
DIAGONAL FoV 336x256= 13.4°
5.712
0.2249
FPA ACTIVE AREA
336x256
0.35 M A B M C M
11.88
0.468
16.44±0.50
0.647±0.020
3
4.352
0.1713
FPA ACTIVE AREA
336x256
0.35 M A B M C M
C
B
C
0.00
45.01 0.05
+0.000
1.772 - 0.002
0.35 M A B M C M
0.07
0.003
7.1°
FoV V
29.17
1.148
ENTRANCE
PUPIL
( 22.00 )
0.866
C
DWG NO.
A
A
50-336 35mm-f1.2
B
ZONE 2C3
CENTER OF
GRAVITY
B
ZONE 2B6
SH
26.33
1.037
1
REV
100
38.34±0.50
1.509±0.020
3
THIRD ANGLE PROJECTION
PROPRIETARY - FLIR SYSTEMS, INC.
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION TO FLIR SYSTEMS, INC. THIS INFORMATION MUST BE
MAINTAINED IN CONFIDENCE AND USED ONLY IN A MANNER CONSISTENT WITH THE DOCUMENTATION AND ANY
EXECUTED NON DISCLOSURE AGREEMENT, AND MAY NOT BE DISCLOSED TO ANY THIRD PERSON WITHOUT
FLIR'S WRITTEN CONSENT.
THIS DOCUMENT IS CONTROLLED TO FLIR TECHNOLOGY LEVEL 1. THE INFORMATION CONTAINED IN THIS
DOCUMENT PERTAINS TO A DUAL USE PRODUCT CONTROLLED FOR EXPORT BY THE EXPORT ADMINISTRATION
REGULATIONS (EAR). DIVERSION CONTRARY TO US LAW IS PROHIBITED. US DEPARTMENT OF COMMERCE
AUTHORIZATION IS NOT REQUIRED PRIOR TO EXPORT OR TRANSFER TO FOREIGN PERSONS OR PARTIES UNLESS
OTHERWISE PROHIBITED.
A
METRIC
INTERPRET DRAWING
PER ASME Y14.5M-1994
---------------------------------------------UNLESS OTHERWISE SPECIFIED
SURFACE ROUGHNESS 32
.X = .25
.XX = .13
ANGULAR = .5
FILLET RADII = .13 MAX
8
7
6
5
4
MATERIAL
FLIR Systems, Inc.
70 Castilian Drive
Goleta, CA 93117
PROJECT NO.
APPROVALS
DWN
FINISH
COVINGTON
DATE
07/18/13 TITLE
CHK
UNLESS OTHERWISE SPECIFIED ALL
MEASUREMENTS ARE IN MM.
ALL DIMENSIONS IN [ ] ARE INCHES.
DO NOT SCALE DRAWING.
CALC WT:
3
241.9 g
DSGN COVINGTON 08/01/11
ENG
APP
2
SIZE
D
IDD, QUARK 336 CAMERA CORE,
35mm-f1.2
CAGE
064Y2
REV
DWG NO.
50-336 35mm-f1.2 100
SCALE 3:1 PRINTED: 7/19/2013 SHEET
1 OF 2
SOLIDWORKS MODEL: 50-Quark Camera Core
MODEL REVISION: G-WC
1
A
8
6
7
5
3
4
DWG NO.
SH
50-336 35mm-f1.2
2
REV
1
100
9.30°
FoV H
D
D
29.17
1.148
ENTRANCE
PUPIL
30.00
1.181
4.30 0.169
4X M2X0.4 - 6H
MINOR DIAMETER
0.35 A B M C M
0.00
0.000
19.00
0.748
4X M1.6X0.35 - 6H 2.50
0.35 A B M C M
MINOR DIAMETER
0.00
0.000
R1.50
0.059
CENTER OF
GRAVITY
PIN 2
C
0.07
0.003
PIN 60
30.00
1.181
38.34±0.50
1.509±0.020
3
26.37
1.038
CENTER OF GRAVITY
C
19.00
0.748
22.00
0.866
C
5.00
0.197
5.70
0.224
A
0.05 A
PIN 59
6
HATCHED SURFACE
B
PIN 1
50-336 35mm-f1.2
TERMINAL STRIP
SAMTEC STF-30-1.50-L-D-P-TR
DWG NO.
0.13 A
4
16.54
0.651
100
B
REV
B
2
22.00
0.866
SH
( 22.00 )
0.866
VIEW B-B
VIEW A-A
IDD, QUARK 336 CAMERA CORE,
35mm-f1.2
A
METRIC
PROPRIETARY - FLIR SYSTEMS, INC.
THIS DOCUMENT IS CONTROLLED TO FLIR TECHNOLOGY LEVEL 1. THE INFORMATION CONTAINED IN THIS
DOCUMENT PERTAINS TO A DUAL USE PRODUCT CONTROLLED FOR EXPORT BY THE EXPORT
ADMINISTRATION REGULATIONS (EAR). FLIR TRADE SECRETS CONTAINED HEREIN ARE SUBJECT TO
DISCLOSURE RESTRICTIONS AS A MATTER OF LAW. DIVERSION CONTRARY TO US LAW IS PROHIBITED.
US DEPARTMENT OF COMMERCE AUTHORIZATION IS NOT REQUIRED PRIOR TO EXPORT OR TRANSFER TO
FOREIGN PERSONS OR PARTIES ULESS OTHERWISE PROHIBITED.
FLIR Systems, Inc.
70 Castilian Drive
Goleta, CA 93117
8
7
6
5
4
3
2
SIZE
D
CAGE
064Y2
REV
PIECE PART.
50-336 35mm-f1.2
SCALE 3:1 PRINTED: 7/19/2013 SHEET
2 OF
SOLIDWORKS MODEL: 50-Quark Camera Core
MODEL REVISON: G-WC
1
100
2
A