Engraving laser mobile systems HCP

Features and benefits:
 Laser engraving mobile systém for engraving of big moulds
 Replaces CNC EDM and micro-milling
 New way of laser head clamping
 New Motor travel X,Y,Z
 Remote control of system HCP20
 More mobile and smaller metal box
 Easy of use with LIGHTER software
Inprovement of HCP20 in comparison with HCP10:







-
New way of laser head clamping to optimise its rotating to work position .
Improved focusing of laser head on the working area by using two red points.
Ethernet connection with superior PC (notebook is advantage) allows to prepare data far from
laser (without laser) or to use remote control of system HCP20.
Optimalization of working box designed for storing of the whole laser system. The box is smaller,
more mobile and also adapted for loading to car and moving in a hall. It is equipped with rotary
drum for careful placing of laser head and optical cable.
Manual travel X, Y, Z for quick setting of laser head working position.
Motor travel X,Y,Z for very precise moving of laser head to work position. KEY button on the
control board allows to lock the axis in the chosen place without any aberration.
Block of power supply of clamping magnet is newly equipped except UPS function also with
acoustic alarm for line voltage fault.
HCP20 meets the hardest demands for mobile, quick and precise engraving of the large tools
and molds.
Frequent moving and visiting our customers is now without any problem and risk.
HCP 20 - specification
Nominal power
Pulse emergy (max.)
Peak power (max.)
Max. power
Input voltage
Imput current
Head cable lenght
Laser source
Emission of radiation
Wavelength
Modulation
Aiming Beam
Temperature range - operative
Temperature range - storing
Cooling
Marking speed
Objective F-Theta mm
Working distance mm
Working area
(mm x mm)
63S
72
35x35
HCP 20 - 20W
20 W
1000 μJ
10 kW
300W
100 do 240V
3 do 1,25A max
3 m standard
Fiber laser
Pulsed
1060-1080 nm
20 kHz ÷ 100 kHz
1 mW @ 635 nm
5°C do 50°C
-10°C do 60°C
Forsed Air
Up to 2000mm/sec
100S
113
50x50
160S
177
100x100
HCP 20 - 30W
30W
1000 μJ
10 kW
300W
100 do 240V
3 do 1,25A max
3 m standard
Fiber laser
Pulsed
1060-1080 nm
30 kHz ÷ 100 kHz
5 mW @ 635 nm
5°C do 40°C
-10C do 60°C
Forsed Air
Up to 2000mm/sec
254S
280
140x140
100L
97
60x60
160L
175
110x110
HCP 20 - 50W
50W
1000 μJ
12 kW
300W
100 do 240V
3 do 1,4A max
3 m standard
Fiber laser
Pulsed
1060-1080 nm
50 kHz ÷ 100 kHz
5 mW @ 635 nm
10°C do 35°C
-10C do 60°C
Forsed Air
Up to 2000mm/sec
254L
297
180x180
330L
387
220x220
HCP20 complies with the strictest requirements and criteria for mobile, fast and precise work
for large engraving tools and molds. Frequent moving or commuting with laser engraving
system to the customer is now without problems and risks.
Examples of use:
Engraving grid in aluminum
Engraving directional light
Engraving homologation describe of light in car
Engraving of mould
Features and benefits:
 Ultra compact laser head
 Low power consumption
 High quality marking and precision
 New portable and storable device in elegant box
 Easy of use with LIGHTER software
 Built-in encoder for smooth engraving
 Manual feed
HCP 10
is the ultra compact pulsed fiber laser offering first class performance and advanced
software features. Thanks to state-of- the-art technology HCP 10 allows fast marking on metal and
plastic material increasing systems productivity typical for automotive and electronics industry.
Ultra compact dimension allows ease mechanical installations in the production line or inside a
machines where limited space is always a key issue. With the smallest scanning head of the market
place (112x298x90 mm), HCP 10 drastically simplifies systém design and machine integration. Available
with 10W and 20W laser power emission, HCP 10 is very simple to set up and to parameterise using
Lighter software suite. Thanks to Lighter ease of use HMI, operator can design any kind of label, with
logo, text, datamatrix, bar codes. HCP 10 implements Embedded Marking Controller (EMC) for complete
system control in “Stand Alone Mode” or “Master –Slave Mode”.
HCP 10 is equipped with up to 4indipendent axys controls ( X,Y,Z, rotative axys) to implement MultiLayers and Rotating Marking and to change marking head position.Dedicated encoder input is applied
for Marking On Fly even in accelerated and un-costant speed conditions. Low Power consumption and
excellent power efficiency are classified at top in its category.
Elegant and compact portable box
HCP Fiber Laser System in the portable box is
equipped with all the necessary components to
get to any place quickly. Simple and quick installation
allows to mark light and small parts on the table
of the box.We mark big pressing moulds by strong
electromagnet that is fixed to a mould and positioning
system.
HCP 10 - specification
Nominal power
Pulse emergy (max.)
Peak power (max.)
Max. power
Input voltage
Imput current
Head cable lenght
Laser source
Emission of radiation
Wavelength
Modulation
Aiming Beam
Temperature range - operative
Temperature range - storing
Cooling
Marking speed
Objective F-Theta mm
Working distance mm
Working area
(mm x mm)
63S
72
35x35
HCP 10 - 20W
20 W
1000 μJ
10 kW
300W
100 do 240V
3 do 1,25A max
3 m standard
Fiber laser
Pulsed
1060-1080 nm
20 kHz ÷ 100 kHz
1 mW @ 635 nm
5°C do 50°C
-10°C do 60°C
Forsed Air
Up to 2000mm/sec
100S
113
50x50
160S
177
100x100
HCP 10 - 30W
30W
1000 μJ
10 kW
300W
100 do 240V
3 do 1,25A max
3 m standard
Fiber laser
Pulsed
1060-1080 nm
30 kHz ÷ 100 kHz
5 mW @ 635 nm
5°C do 40°C
-10C do 60°C
Forsed Air
Up to 2000mm/sec
254S
280
140x140
100L
97
60x60
160L
175
110x110
HCP 10 - 50W
50W
1000 μJ
12 kW
300W
100 do 240V
3 do 1,4A max
3 m standard
Fiber laser
Pulsed
1060-1080 nm
50 kHz ÷ 100 kHz
5 mW @ 635 nm
10°C do 35°C
-10C do 60°C
Forsed Air
Up to 2000mm/sec
254L
297
180x180
330L
387
220x220
The various parts of the laser can interact with the marking system. Marking set consists of two parts:
PCI electronic board (iMarkPCI) that ensures control signals flow to the laser and an efficient software
(Lighter) that provides graphical user interface for marking designs and marking process automation.
Graphic editor of software Lighter creates and edits strings, shapes, barcodes, matrix codes.
It is also able to import logos in raster and vector format.
Examples of use:
MEPAC VŽDY NĚCO NOVÉHO
Pro naše zákazníky máme velkou škálu
produktů pro přesné strojírenství od nástrojů
po přístrojovou techniku, laserové systémy.
Veškeré naše produkty můžete také zakoupit na
našem e-shopu wwww.mepac-eshop.cz. Naši
obchodní zástupci nabízejí odborné poradenství
v oblasti přesného strojírenství, ale také
kompletní sortiment našeho zboží v pojízdných
prodejnách. V sekci prodeje přístrojů a nástrojů
zastupujeme na Českém, Slovenském a Polském
trhu, 17 zahraničních firem.
Veškeré naše zboží zakoupíte na www.mepac-eshop.cz
MEPAC CZ, s.r.o.
tel. /mob. /fax
e-mail
Central office TŘINEC
Oldřichovice 862
739 61 Třinec
www.mepac.cz
tel.:
mob.:
mob.:
mob.:
[email protected]
Branch office – VSETÍN
Průmyslový areál
Jasenice objekt 6
755 01 Vsetín
tel.: 571 417 771
mob.: 739 075 567
mob.: 739 366 619
mob.: 739 453 809
mob.: 608 710 904
Branch office – VRBNO
Zlatohorská 648
739 26 Vrbno p. Pradědem
tel.: 554 725 305
mob.: 603 507 946 (shop)
mob.: 739 204 755 (shop)
mob.: 775 569 917 (workshop)
fax: 554 725 035
[email protected]
Branch office – POLSKO
Czechowice - Dziedzice
tel.: 0048 910 085 519
mob.: 0048 513 041 157
[email protected]
MEPAC SK, s.r.o.
Kotešová 817
013 61 Kotešová (okres Bytča)
www.mepac.sk
tel.: 00421 910 082 933
mob.: 00421 917 120 075
mob.: 00421 905 910 944
558 348 112
603 515 357 (shop)
776 086 591 (shop)
773 784 101 (workshop)
(production)
(production)
(shop)
(shop)
[email protected]
[email protected]
Věříme, že i Vaše firma najde v našem bohatém sortimentu užitečné přístroje či nástroje pro Vaši
práci.
kolektiv firem MEPAC CZ, s.r.o. a MEPAC SK, s.r.o.