DG 1000 tech. data

TECHNICAL DATA :
Scale
Wingspan
Length
Area
Loading
Profile -wood wings
-GFK wings
1 : 3,75
4,80/5,33 m
2,29 m
112/122 dm2
107/98 g/dm2
HQ 3,0
HQ 2.5
CONTROLLABLE COMPONENTS :
Elevator, rudder, ailerons, brake flaps, landing gear, aero-tow hook,
brake of landing gear
Special wish: water balast 2 x 1,25 l – out put radio controlled,
Motor version (Elicker 18“ unit)
Available versions (you can choos in order) :
Wings wood (with or without flaps) or GFK (with flaps)
Stickers blue or red (or own design)
Cockpit blue or red
Model DG 1000 is made with a laminated glass fusselage, rudder, elevator, tips and winglets.
The wings are made of polystyrene with a glass and carbon components, a veneer covering with a layer of plastic foil " ORACOVER " or full
CFK version. A carbon and glass fibre strengthener runs through the centre of the wings. In the case of special wish there are installed water
balasts.
Landing gear with brake are detailed. Cocpit with stuffing and painting instrument panel. Thanks to the fine workmanship and finishing, it only
needs to install the servomotor of your choice for it to fly.
PDF vytvořeno zkušební verzí pdfFactory www.fineprint.cz
PDF vytvořeno zkušební verzí pdfFactory www.fineprint.cz
PDF vytvořeno zkušební verzí pdfFactory www.fineprint.cz
PDF vytvořeno zkušební verzí pdfFactory www.fineprint.cz
PDF vytvořeno zkušební verzí pdfFactory www.fineprint.cz
Servoboxes :
size 50x46x16 mm (for Micro digi and Micro 3 BB servos)
size 58x54x20 mm ( for all Profi digi, Profi 3BB, Europa, Mini BB servos)
PDF vytvořeno zkušební verzí pdfFactory www.fineprint.cz