Bulletin ZDP100 - Filco spol. s ro

Portable ZDP100
Pressure dew point meter
for Compressed Air and Gases
Instrument
ZDP100
was designed to meet the
requirements for accurate
determination of the water content
in compressed air and nitrogen.
The partial pressure of water vapor
in the gas corresponds to pressure
dew point (PDP). It is not therefore
necessary to measure other
parameters (like temperature and
relative humidity) and then determine
PDP incorrectly.
Obtained value of PDP is visible on
the display and can also be
available on optional contacts for
external data-processing.
Scope of delivery ZDP100:
Ceramic moisture sensor ZHM100
Sensor chamber which is fed with sample of air / gas
Large LED display
Needle valve to control an amount of gas sampling
Robust portable casing
Optional analog outputs 4-20 mA
Calibration certificate
ZDP100
Instrument without compromises
Parameters
Data
Sensor PDP
ZHM100, ceramic, traceable 13 point calibration
PDP range
-100°Cdp do +20°Cdp
Display
°C or °F
Pressure range
16 barg
Operating temperature
-40°C to +60°C
Accuracy
+/- 1°C from -59°Cdp to +20°Cdp; +2/°C from -100°Cdp to -60°Cdp
Resolution
0.1°C from -79°Cdp do +20°Cdp; +/-1 digit; 1°C from -100°Cdp to -80°Cdp; +1/digit
Voltage
230VAC, option 110VAC, 24VAC, 24VDC
Power
2W
Protection
IP54
Power supply
230VAC IEC ; 4-20mA -2x 4mm “banana plugs"
Air connection
two 4 mm fast-action connectors for 4 mm PTFE hose
Weight
2 kg
Sensor's calibration
by exchange
© 2011 Parker Hannifin Corporation. All rights reserved.
BULZDP100-01-EN
FILCO, spol. s r.o.
Dvorská 464
CZ-503 11 Hradec Králové
Tel: +420 495 436 233
Fax:+420 495 453 086
[email protected]
www.filco.cz | www.zander.cz
Váš autorizovaný distributor v ČR