all-stainless steel pressure gauges with

ALL-STAINLESS STEEL PRESSURE GAUGES WITH
SEPARATING MEMBRANE
diameter 63, 100, 160 mm
lower and back connection
Specification:
Basic design of all-stainless steel pressure gauge with bourdon tube. It can be used for
most aggressive mediums measurements, which are not of a high viscosity. Optional:
glycerine damper.
Description:
Special:
−
−
−
−
−
−
−
−
−
−
−
−
stainless steel 1.4301 case
glass window
stainless steel 1.4571 measure system
accuracy 1,6%, 2,5%
gauge, vacuum gauge, pressure-vacuum
gauge
measure range from 4 kPa to 60 Mpa
glycerine and silicon damper
safety design
with switch on contacts
higher overloading
special thread
special dial design
Plastový
Type
379CH
Diameter
379CHG
376CH
100mm
376CHG
160mm
Design
Glycerine
Accuracy
1,6 / 2,5
Glycerine
1,6 / 2,5
Measure range
0 – 4 kPa…0 – 60 MPa Vacuum and pressure
High accuracy
measurement
Constant pressure - 3/4 the range
Fluctuating pressure – 2/3 the range
Case
Ring
Inspection window
Dial
Needle
Measure mechanism
Connection
Flange
Separating membrane
Dependence on
temperature
Weight approx.
Thermis, spol. s r.o.
Mateří 14
614 00 Brno
Czech Republic
1,6 / 2,5
1,6 / 2,5
Stainless steel 1.4301
Stainless steel 1.4301
Glass
White Al metal plate
Black Al metal plate
Stainless steel 1.4571
M 20x1,5, G 1/2, thread to M 65x2 ( G1 1/2),
Open flange from DN 15 to DN 80
Stainless steel 1.4571
Teflon, Stainless steel, PTFE, Hestelloy, Monel, Nickel, Tantan, Titan, Silver-plated
0,3%/10K for deviation from the normal temperature 20°C
2,1 kg
2,6 kg
3,0 kg
Up to 60 kPa marking with M ( 379CHMG 379CHMG atd )
Tel: +420 545 226 177-184
Fax: +420 545 226 177, 181
E-mail: [email protected]
www.thermis.cz
3,9 kg
IČ: 26 88 36 43
DIČ: CZ 26 88 36 43
KOS v Brně, oddíl C, vložka 43349
Komerční banka Brno – Černá Pole