Practical Components
Transkript
Practical Components
Open the bookmarks window for easy navigation through this catalog. Click here to jump to the Table of Contents. Welcome to Practical Components Practical Components is a distributor of mechanical IC samples or “dummy” components and also distributes SMD production tools and equipment. Frequently Asked Questions What are dummy components? Dummy components are the exact mechanical equivalent of functional electronic components. Why use dummy components? Dummies save money. In cases where only mechanical characteristics are required, dummy components can be used instead of live functioning components. Because there is not an expensive die inside the package, the cost for performing mechanical testing is significantly lower. Who is Practical Components? A team of dedicated electronic industry professionals makes up Practical Components, offering value pricing, on-time delivery, and superior service to customers. The Practical Components team is ready to provide project assistance in the areas of technical component knowledge, drawings, component land patterns, and PCB practice kits. What is a PCB Practice Kit? Combining both the PCB Practice Board and dummy components allows customers to conduct assembly process evaluation without using high-cost live components and functional PC Boards. Kits are available in a single pack, for employee hand soldering training, or packaged for production equipment evaluation. Both XY Theta data and Gerber data are available without charge. What other products does Practical Components offer? There are a number of solder training aids, tools, and equipment that Practical Components carries. The catalog has the latest information regarding available products. In addition, your sales representative can supply technical information and pricing on these products. Who uses dummy components? Companies that are involved with electronic component assembly, testing, evaluation and employee training. Contacting Practical Components. If you should have any additional questions concerning Practical Components, our products or policies, we offer a number of different ways to contact us: Practical Components, Inc. 15211 Springdale Street Huntington Beach, CA 92649 Tel: 1-714-899-8309 Fax: 1-714-899-8599 [email protected] www.practicalcomponents.com How To Place Your Order Our sales staff is ready to serve you from 7:30 A.M. to 5 P.M. Pacific Standard Time, Monday through Friday. Our fax lines are open 24 hours every day. Fax and email orders received after normal business hours are processed the next business day. Please include your telephone number so we can confirm your order. PRACTICAL COMPONENTS Practical Components, Inc. 15211 Springdale Street Huntington Beach, CA 92649 USA Phone: 1-714-899-8309 Fax: 1-714-899-8599 Email: [email protected] Web Site: www.practicalcomponents.com F.O.B. Is Huntington Beach, CA USA Terms and Conditions Out Of Stock Items: Items not available for immediate shipment will be shipped as they become available. Items not available at the end of 90 days will be cancelled. The number of back-ordered days may be extended beyond 90 days with customer approval. Return Policy: Returns must be made promptly and accompanied by a return authorization number. Please contact a customer service representative to obtain a return authorization number. All returns must be made within 30 days of date of invoice and accompanied by return authorization number. Return freight charges must be prepaid. C.O.D. returns cannot be accepted. Return merchandise in original packaging and in resalable condition. Please note that items returned due to customer error may be subject to a restocking charge of 25%. Non-catalog items are not returnable. Catalog Listings: Not all products listed in this catalog are maintained in stock, and all product specifications and prices for each product are current as of the date of publication. Product listings, specifications and prices for each product are subject to change without notice. Product Liability: Practical Components’ sole obligation for products that prove to be defective within 10 days of purchase will be replacement or refund. Practical Components gives no warranty either expressed or implied and specifically disclaims all other warranties, including warranties for merchantability and fitness. In no event shall Practical Components’ liability exceed the buyer’s purchase price nor shall Practical Components be liable for any indirect or consequential damages. Shipment Damage: Merchandise is carefully packaged in compliance with carrier requirements. Claims for loss or damage in transit must be made with the carrier by the customer. All shipments should be unpacked and inspected immediately upon receipt. If damage does not become apparent until shipment is unpacked, make a request for inspection by the carrier’s agent. Failure to do so will result in the carrier refusing to honor the claim. Non-Catalog Items: Merchandise not listed in our catalog, if available from our suppliers, may be subject to minimum order quantities and/or special handling charges. Shipment is made as quickly as deliveries are received from our suppliers. Special order products are sold on a non-returnable basis. Quotations: All items are subject to prior sale. Dishonored Check Policy: If a check you give us as payment is dishonored for any reason by the bank or any other institution on which it is drawn, you agree to pay us $20.00 as a service charge. In addition, you agree to pay any other reasonable charges imposed by any check verification company or collection agency that we may use for collection. Prices/Quantities: Prices are subject to change without notice and quantities may be limited. Handling Charge: A $10.00 handling charge applies to all orders less than $50.00. Terms: We accept Visa, MasterCard and American Express (minimum order is $50.00). Open Account: We bill on a net 30-day basis to customers with approved credit. Large Quantity Quotations: Practical Components will be happy to quote quantities in excess of the amounts shown in the catalog. Freight Charges: On open accounts, actual freight charges are added to the invoice. A packing and handling fee of $4.50 is added to the order. C.O.D accounts will have the freight charges prebilled to the C.O.D. total in addition to a $4.50 packing and handling charge. Special Requirements: Please include specific instructions if you require special packing, marking, shipping, routing or insurance. *All prices are in US$. Contents Click on highlighted section heading to jump directly to that section. Ball Grid Array PBGA Plastic Ball Grid Array ...................................................... 4 CSBGA Chip Scale BGA Package ............................................. 7 CBGA Ceramic Ball Grid Array ................................................... 8 High Temperature FR4 CBGA Test Board .................................. 8 BGA Variable Pitch and Array Board .......................................... 9 µBall Grid Array ......................................................................... 10 µBGA Test Boards ..................................................................... 14 Printed Circuit Board Kits Custom PCB Practice Kits ........................................................ 37 PC008 Practice Board and Kits ................................................ 38 PC008 Test Pattern ................................................................... 40 SMTA Saber Evaluation PC Board and Kits ............................. 41 PCB003 Solder Practice Board and Kit .................................... 42 Omni Training Kits ..................................................................... 43 Through-Hole Training Kit, Through-Hole Recertification Kit, Standard Pitch Training Kit, Fine Pitch Training Kit Flip Chip Flip Chip .................................................................................... 15 Flip Chip Test Boards ................................................................ 16 Plastic Quad Flat Pack QFP Plastic Quad Flat Pack ...................................................... 18 LQFP Low Profile Quad Flat Pack ............................................ 21 QFN Quad Flat Pack Non-Leaded ............................................ 21 BQFP Bumpered Quad Flat Pack ............................................. 22 Omni Training Products Workmanship Acceptance Posters .......................................... 44 SMT Workmanship Criteria on CD-ROM .................................. 44 Terminal Holder ......................................................................... 44 Unified Inspection Criteria Workmanship Manuals .................. 45 Unified Wiring and Soldering Handbook ................................. 45 Soldering Workbook ................................................................. 45 Practical Production Tools Ceramic Body CQFP Ceramic Quad Flat Pack ................................................ 23 LCC Leadless Ceramic Carrier ................................................. 23 Small Outline SOIC Small Outline Integrated Circuit ...................................... 24 TSOP Thin Small Outline Package ........................................... 25 SSOP Small Shrink Outline Package ....................................... 26 TSSOP Thin Shrink Small Outline Package ............................. 28 SON Small Outline Non-Leaded Package ............................... 29 Plastic Leaded Chip Carrier PLCC Plastic Leaded Chip Carrier ........................................... 30 Passives, Transistors, Discretes SMT Surface Mount Transistors ............................................... 31 SMC Surface Mount Ceramic Capacitors ................................ 32 SMR Surface Mount Resistors .................................................. 33 Zero Ohm Jumper Resistors .................................................... 34 SMTA Surface Mount Tantalum Capacitor ............................... 34 SME Surface Mount Electrolytic Capacitors ............................ 35 Melf Diodes ............................................................................... 35 Through-Hole TO Through-Hole Transistors ................................................... 36 Axial Leaded Resistors ............................................................. 36 Weller QFP Lead Repair Kit ...................................................... 46 Weller Reballing Kit ................................................................... 47 Personal Magnifiers .................................................................. 48 Adjustable Matrix Trays ............................................................. 49 Practical Vacuum Handling Tools ............................................. 50 Practical Hand-Vac, Practical Pen-Vac, Practical Bulb-Vac, Practical SMD-Vac-GP, Practical Pac-Vac, Practical HP-300 Weller Soldering Gun Kit .......................................................... 52 Weller Circuit Board Vise .......................................................... 52 Weller Self-Contained 2-Person Fume Extractor ...................... 52 Xcelite Pliers Kit—Electronics Handy Pack Assortment .......... 52 Xcelite Attaché Tool Cases ....................................................... 53 Xcelite Multi-Purpose Tool Kit ................................................... 54 Xcelite Offset Ratchet Screwdriver Set ..................................... 54 Xcelite Personal Computer Repair Kit ...................................... 54 Eram Mutli-Purpose Assembly Kit ............................................ 54 Eram Anti-Static 5-Tweezer and Micro-Cutter Kit ..................... 54 Tech Spray Products Cleaners/Degreasers, Defluxers, Dusters, Freeze Spray ......... 55 Static Control ............................................................................ 58 Desoldering Braid ..................................................................... 59 Equipment and Specialty Products .......................................... 60 Swabs ....................................................................................... 60 Wipes ........................................................................................ 61 Glossary .................................................................................... 62 Fax Order Form ......................................................................... 63 PBGA Plastic Ball Grid Array 1.0mm Pitch Part Number I/O Count Pitch Body Size Ball Matrix Ball Alignment PBGA84-1.0mm-11mm PBGA144-1.0mm-13mm PBGA156-1.0mm-15mm PBGA160-1.0mm-15mm PBGA196-1.0mm-15mm PBGA208-1.0mm-17mm PBGA256-1.0mm-17mm PBGA288-1.0mm-23mm PBGA324-1.0mm-23mm 84 144 156 160 196 208 256 288 324 1.0mm 1.0mm 1.0mm 1.0mm 1.0mm 1.0mm 1.0mm 1.0mm 1.0mm 11mm 13mm 15mm 15mm 15mm 17mm 17mm 23mm 23mm — 12 x 12 14 x 14 14 x 14 14 x 14 16 x 16 16 x 16 22 x 22 22 x 22 — Full Grid Perimeter Perimeter Perimeter Perimeter Full Grid Perimeter Perimeter Notes Part Number System Overall thickness of 1.0mm pitch PBGA packages will vary in size (please call for more details). Parts are packaged in JEDEC trays. Call for tape and reel quantity and availability. Solder ball material is eutectic 63/67 SnPb. Some components are daisy-chained (please call for more details). Daisy-chained connections are connections between I/O (input/output) of the component. Plastic Ball Grid Array PBGA144–1.0mm–13mm I/O Count Quantity Per Tray 176 160 126 126 126 90 90 60 60 Body Size Pitch Add “T” to end of part number for Tray. Add “TR” to end of part number for Tape and Reel. BGA packages should be baked at 125°C for 24 hours prior to assembly to prevent delamination during the assembly process. Parts can be baked and dry-packed. Plastic Ball Grid Array 1.5mm/1.27mm Pitch Part Number I/O Count Pitch Body Size Ball Matrix Ball Alignment PBGA121-1.27mm-15mm PBGA169-1.5mm-23mm PBGA225-1.5mm-27mm PBGA256-1.27mm-27mm PBGA272-1.27mm-27mm PBGA292-1.27mm-27mm PBGA313-1.27mm-35mm PBGA324-1.27mm-27mm PBGA352-1.27mm-35mm PBGA388-1.27mm-35mm PBGA420-1.27mm-35mm PBGA480-1.27mm-35mm PBGA676-1.27mm-35mm 121 169 225 256 272 292 313 324 352 388 420 480 676 1.27mm 1.5mm 1.5mm 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 15mm 23mm 27mm 27mm 27mm 27mm 35mm 27mm 35mm 35mm 35mm 35mm 35mm 11 x 11 13 x 13 15 x 15 20 x 20 20 x 20 20 x 20 25 x 25 20 x 20 26 x 26 26 x 26 26 x 26 26 x 26 26 x 26 Full Grid Full Grid Full Grid Perimeter Perimeter Perimeter Stagger Perimeter Perimeter Perimeter Perimeter Perimeter Full Grid Notes Part Number System Plastic Ball Grid Array Parts are packaged in JEDEC-trays. Call for tape and reel quantity and availability. Solder ball material is eutectic 63/67 SnPb. Solder ball diameter is 0.76mm (30 mils). Daisy-chain connections are connections between I/O (input/output) of the component. Daisy-chain connections are used, paired with a PC board that has complimentary connections between pads in order to test for continuity. BGA packages should be baked at 125°C for 24 hours prior to assembly to prevent delamination during the assembly process. 4 PBGA121–1.27mm–15mm I/O Count Quantity Per Tray 126 60 40 40 40 40 24 40 24 24 24 24 24 Body Size Pitch Add “T” to end of part number for Tray. Add “TR” to end of part number for Tape and Reel. Parts can be baked and dry-packed. Most PBGA packages are assembled with “dummy” die to conduct thermal coefficient testing. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com PBGA Top View Die Side 1 4 3 2 7 6 5 9 8 ø1.00(3X) Ref. 10 11 12 Bottom View Ball Side 13 13 12 11 10 9 8 7 6 5 3 4 2 ø0.10 S C ø0.30 S C A S B S ø0.75±0.15 1 PBGA169-1.5mm-23mm A A B B C C H 1.50 18.00 F G 23.00±0.20 D E 20.00 Ref. D E F G H J J K K L L M M N N 3.00*45°(4X) B 1.50 20.00 Ref. Pin #1 Corner 0.97Ref. 8.00 0.15 C A 23.00±0.20 30° Typ. 0.20(4X) C Seating Plane 0.60±0.10 0.56 Ref. Pin #1 Corner 1 2 3 2.13±0.13 6 5 7 8 9 10 11 12 13 Bottom View Ball Side ø1.00(3X) Ref. Top View Die Side 4 15 14 14 15 13 12 11 10 9 8 7 6 5 4 3 2 ø0.10 S C ø0.30 S C A S B S ø0.75±0.15(225X) 1 A PGBA225-1.5mm-27mm A B B C C D D H J 1.50 21.00 G 27.00±0.20 E F 24.00 Ref. E F G H J K K L L M M N N P P R R 4.00*45°(4X) B 1.50 24.00 Ref. 21.00 1.17 Ref. 0.15 C 30° Typ. A 27.00±0.20 0.20(4X) C Seating Plane 2.33±0.13 0.60±0.10 0.56 Ref. 1 2 3 4 5 6 7 8 Bottom View Ball Side ø1.00(3X) Ref. Top View Die Side Pin #1 Corner 20 19 18 17 16 15 14 13 12 11 10 9 9 10 11 12 13 14 15 16 17 18 19 20 8 7 6 5 A 4 3 2 ø0.10 S C ø0.30 S C A S B S ø0.75±0.15(256X) 1 PBGA256-1.27mm-27mm A H J H J K L M N 1.27 E F G 24.13 E F G 27.00±0.20 B C D 24.00 Ref. B C D K L M N P P R T R T U V U V W W Y Y 4.00*45°(4X) B 1.27 24.00 Ref. 1.17 Ref. 30° Typ. 24.13 0.15 C A 27.00±0.20 0.20(4X) C 0.56 Ref. Seating Plane 0.60±0.10 2.33±0.13 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 5 PBGA Pin #1 Corner 1 2 3 4 ø1.00(3X) Ref. Top View Die Side Bottom View Ball Side 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 ø0.10 S C ø0.30 S C A S B S ø0.75±0.15(313X) 3 2 1 A A B C B C D E D E F G H J H J L K L 30.48 30.00 Ref. K M N P R 2.54 1.27 F G 35.00±0.20 PBGA313-1.27mm-35mm M N P R T T U U V W Y V W Y AA AB AA AB AC AD AC AD AE AE 4.00*45°(4X) B 1.27 2.54 30.00 Ref. 30.48 0.15 C 0.15 C 1.17 Ref. A 0.15 C 30° Typ. C Seating Plane 0.56 Ref. PBGA352-1.27mm-35mm 35.00±0.20 0.20(4X) 2.33±0.13 0.60±0.10 Pin #1 Corner Top View Die Side ø1.00(3X) Ref. Bottom View Ball Side 4.00*45°(4X) A B C D E F G H J K L M N P R T U V W Y AA AB AC AD AE AF 1.27 31.75 30.00±0.20 30.00 Ref. A B C D E F G H J K L M N P R T U V W Y AA AB AC AD AE AF ø0.10 S C ø0.30 S C A S B S ø0.75±0.15(352X) 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 10 1112 13 14 15 16 17 18 19 20 21 22 23 2425 26 B 1.27 30.00 Ref. 0.15 C 1.17 Ref. 31.75 30° Typ. A 35.00±0.20 0.20(4X) C 0.56 Ref. 6 Seating Plane 0.60±0.10 2.33±0.13 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com CSBGA Chip Scale BGA Package Part Number I/O Count Body Size Pitch Ball Matrix Ball Alignment CSBGA20-5mm-1.0mm CSBGA28-5mm-.8mm CSBGA48-8mm-1.0mm CSBGA56-9mm-.8mm CSBGA72-9mm-.8mm CSBGA80-10mm-1.0mm CSBGA108-10mm-.8mm CSBGA96-12mm-1.0mm CSBGA120-13mm-1.0mm CSBGA156-13mm-.8mm CSBGA120-9x13mm-.8mm 20 28 48 56 72 80 108 96 120 156 120 5mm 5mm 8mm 9mm 9mm 10mm 10mm 12mm 13mm 13mm 9 x 13mm 1.0mm .8mm 1.0mm .8mm .8mm 1.0mm .8mm 1.0mm 1.0mm .8mm .8mm 6x6 6x6 8x8 10 x 10 11 x 11 12 x 12 11 x 11 14 x 14 13 x 13 15 x 15 9 x 14 Perimeter Perimeter Perimeter Perimeter Perimeter Perimeter Perimeter Perimeter Perimeter Perimeter Full Array Notes Part Number System Chip Scale BGA Package Parts are packaged in waffle trays (tray quantity may vary). All CSBGA packages are daisy-chained. Call for tape and reel quantity and availability. Package outline drawings and daisy-chain patterns are available upon request. A1 Corner 8 7 6 CSBGA20–5mm–1.0mm I/O Count 5 4 3 2 1 8.0 7.0 8.0 Top View (Die Side) Body Size Add “TR” to the end of part number for Tape and Reel. 1 A 7.0 Pitch 2 3 4 5 6 7 8 A B B C C D D E E F F G G H H 1.0 7.0 0.5 Bottom View (Ball Side) X-Ray View (Daisy-Chain Pattern) 1.70 Max. 0.75 0.35 0.6 Nom 0.45 Nom Side View Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 7 CBGA Ceramic Ball Grid Array Part Number I/O Count Pitch Body Size Ball Matrix Ball Alignment CBGA121-1.27mm-15mm CBGA196-1.27mm-18.5mm CBGA256-1.27mm-21mm CBGA304-1.27mm-21x 25mm CBGA361-1.27mm-25mm CBGA625-1.27mm-32.5mm 121 196 256 304 361 625 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 15mm 18.5mm 21mm 21 x 25mm 25mm 32.5mm 11 x 11 14 x 14 16 x 16 16 x 19 19 x 19 25 x 25 Full Array Full Array Full Array Full Array Full Array Full Array Notes Part Number System Parts are cavity up. Parts are packaged in non-JEDEC waffle trays (tray quantity may vary). Parts are daisy-chained. Ceramic Ball Grid Array CBGA196–1.27mm–18.5mm I/O Count Body Size Pitch Add “T” to the end of part number for Tray. CBGA Test Board High Temperature FR4 CBGA Test Board T2 T1 PHONE: 714.899.8309 Fax: 714.899.8599 CBA2561.27mm-21mm T1 T2 T2 T1 CBA1211.27mm-15mm T2 CBA3611.27mm-25mm T1 T2 CBA625CBA3041.27mm-32.5mm 1.27mm-21x25mm P/N PC006 REV A Practical Components now offers this high-temperature FR4 CBGA board for placement and rework using daisy-chain CBGAs. Order the FR4 CBGA Test Board or configure custom kits to meet your specific requirements. E-MAIL: [email protected] T1 Not to scale—Top/bottom view (double-sided). Actual size of board is 3.5" x 3.5". Notes Kits can be configured to the customer’s requirements. All CBGA components are 1.27mm pitch. Gerber Data and X,Y Theta Data are available if required at no charge. Order Number: PCB006 (Board Only) 8 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com BGA Test Board Variable Pitch and Array Board VARIABLE PITCH & ARRAY 1.27mm pitch 26x26 Fax: 714.899.8599 Fax: 714.899.8599 E-mail: [email protected] 1.27mm pitch 34x34 Phone: 714.899.8309 Phone: 714.899.8309 1.27mm pitch 26x26 1.00mm pitch 26x26 0.5mm pitch 22x22 www.practicalcomponents.com VARIABLE PITCH & ARRAY 0.75mm pitch 6x8 1.00mm pitch 26x26 1.00mm pitch 11x11 1.27mm pitch 34x34 0.8mm pitch 9x9 1.5mm pitch 15x15 1.00mm pitch 11x11 0.8mm pitch 18x18 1.5mm pitch 15x15 1.5mm pitch 20x20 1.5mm pitch 20x20 Top View Bottom View Mix and match components to configure your custom kit. Practical Components is now offering a “one-of-a-kind” BGA Variable Pitch and Array PC Board. Each board contains matrices for the most popular ball pitches found on BGAs and CSPs. The use of full matrices allows maximum flexibility for placing parts with full, staggered, or perimeter configurations. Each board has a mixture of even and odd matrices to enable placement, using automatic equipment, of the highest ball counts available. Notes Kits can be configured to the customer’s requirements. Gerber Data and X,Y Theta Data are available if required at no charge. Order Number: PCB005 (Board Only) Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 9 µBGA µBall Grid Array Part Number TV-46A TV-46AM TV-62A TV-62AM TV-74A TV-74AM I/O Count 46 46 62 62 74 74 ! New Pitch Body Size .75mm .75mm .75mm .75mm .75mm .75mm 6 x 8mm 6 x 8mm 9.3 x 11.5mm 9.3 x 11.5mm 8.17 x 12.7mm 8.17 x 12.7mm Notes Part Number System µBall Grid Array Parts are packaged in waffle trays. Parts are eutectic (SnPb) solder bumps. Parts are daisy-chained. Parts are available on tape and reel. A= Qualified Daisy-Chain (reliability evaluation, stress, life cycle testing). AM=Mechanical Daisy-Chain (package handling, pick and place evaluation). X 5.76±0.05 Daisy-Chain Type I/O Count ▲ TV-46 TV-74A A1 Corner 5X 0.75 0.375 4X — 0.05 6 5 Index Area (2.88) (2.505) 4 3 Y 1 2 3 (5.51 Nominal Die) (Nom) Z X ▲ A (3.935) 7.87±0.05 B C ® ® TV46 C1 A µBGA (1.4) 0.375 D (7.47 Nominal Die) (Nom) Z X E (1.33) 7X 0.75 F Datum Axis Y G Die 5 H 4X r0.2 Max Die Pad 1 Datum Axis X Die Pad 2 Back View (2.505) Bump View Z 10 ø0.3±0.03 0.05 Z ø0.1 Z XY ø0.05 Z 9 Z ▲ Seating Plane 10 ▲ 0.18±0.03 9 See Section Detail Side View (Scale=None) 0.84±0.05 A ▲ ST Polyimide Tape ASM 6 // 0.1 Z Die (0.432±0.025) thick Typical Assembly Section Elastomer 7 Adhesive Elastomer Seal 4 Sides/Edges 7 Lead 11 Notes: 1. Dimensioning and tolerancing per ASME Y14.5M–1994. 2. Do not subject part to ultrasonic cleaning or intense UV. 3. Mark back of die with laser. 4. Contact ball position designation per JESD 95–1, SPP –010 (Bumps E3, E4 are missing). 5. Die P/N TES5118. 6. Use Tessera Tape 22099D1AX, where X=suffix which identifies tape manufacturer. 10 7. Elastomer=Tessera P/N. 106000100108 (Dow Corning 6810 Encapsulant). 103000100108 (Dow Corning 6910 Spacer Adhesive). 8. Parts to be cleaned per Tessera cleaning instructions APN01. 9. Make from eutectic solder ball (ø0.3mm). Dimensions apply after solder ball reflow. 10. Datum Z established by high points of solder bumps. 11. Elastomer shall not extend beyond datum A. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com µBGA ! New (5.75) 2X 1.6 4X 0.8 4X — 0.05 A1 Corner Index 2X 1.2 12 11 10 9 8 7 6 TV-62 4 5 3 2 11±-.025 Die (Nom) Z X 3 1 F G H ® 4X RO.2 Max Datum Axis 'X' J Back View Datum Axis 'X' Bump View ® 8.8±0.025 Die (Nom) Z X E RAMBUS µBGA 8X 1 D ® 9.3±0.05 B C TV62T RAMBUS (4.65) Tessera A DIRECT - RDRAM µBGA® TV - 62 T TAPE D.C. YYWW DLLLL X 11.5±0.05 Z 13 Seating Plane Side View (Scale=None) See Section Detail ø0.35±0.03 0.05 Z ø0.1 Z XY ø0.05 Z Z 13 ▲ 0.25±0.03 10 0.89±0.05 ST A ▲ // 0.1 Z Die (0.4±0.025) thick ø0.3 Elastomer 7 Notes: 1. Dimensioning and tolerancing per ASME Y14.5M–1994. 2. Do not subject part to ultrasonic cleaning. 12 Polyimide Tape ASM 6 (Conductor) Typical Assembly Section 9. Parts to be cleaned per Tessera cleaning instructions APN01. 3. Mark back of die with laser. 10. Make from eutectic solder ball (ø0.35mm). Dimensions apply after solder ball reflow. 4. Contact ball position designation per JESD 95–1, SPP –010. 11. (Not used) 5. Silicon Die, 2000 Grit Grind. 12. Elastomer is not allowed to extend beyond datum A. 6. Use Tessera Tape 26399D1AX, where X=suffix which identifies tape manufacturer. 13. Datum Z established by high points of solder bumps. 7. Elastomer=Tessera P/N as follows: 106000100108 (Dow Corning 6811 Encapsulant). 103000100108 (Dow Corning 6910 Spacer Adhesive). 8. (Not used) Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 11 µBGA TV-74 8.17±0.05 4X — 0.05 Die Pad 2 Die Pad 1 (4.085) A1 Corner Index 3 6X 0.75 Y 7 ▲ 6 5 4 3 2 1 (7.49) Die (Nom) Z X E 0.375 F (12.29) Die G H Datum Axis 'Y' J K ® TV74 µBGA® 12.7±0.05 ® D Tessera B C RAMBUS RAMBUS® (6.35) L 15X 0.75 M N DIRECT - RDRAM µBGA® MTV - 74 MECHANICAL YYWW MLLLL A Die 5 P R T Bump View 4X R0.2 Max Datum Axis 'X' Z Back View 10 ▲ Seating Plane See Section Detail 0.05 Z ø0.3±0.03 ø0.1 Z XY 9 ø0.05 Z Z 10 ▲ Side View 0.19±0.03 9 0.77±0.05 ST A ▲ Polyimide Tape ASM 6 // 0.1 Z Die (0.4±0.025 thick) Elastomer 7 Typical Assembly Section Adhesive Elastomer Seal 4 Sides/Edges 7 11 Lead Notes: 1. Dimensioning and tolerancing per ASME Y14.5M–1994. 2. Do not subject part to ultrasonic cleaning or intense UV. 3. Mark back of die with laser. 4. Contact ball position designation per JESD 95–1,SPP –010. 5. Die P/N TES5119. 6. Use Tessera Tape 22799D1AX, where X=Suffix which identifies tape manufacturer. 7. Elastomer=Tessera P/N. 106000100108 (Dow Corning 6810 Encapsulant). 103000100108 (Dow Corning 6910 Spacer Adhesive). 12 8. Parts to be cleaned per Tessera cleaning instructions APN01. 9. Make from eutectic solder ball (ø0.3mm). Dimensions apply after solder ball reflow. 10. Datum Z established by high points of solder bumps. 11. Elastomer shall not extend beyond datum A. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 13 µBGA Test Boards TB-46 Test Board TV46 TEST BOARD 7 – 16 – 96 ® dlg 13371T1A-10 2 1 24 23 22 21 16 17 18 19 20 10 11 12 13 14 15 TEST BOARD µBGA™ 9 8 7 6 5 43 dlg 13371T1A-9 2 1 24 23 22 21 16 17 18 19 20 TEST BOARD µBGA™ 9 8 7 6 5 43 dlg 13371T1A-8 ® ® 2 1 24 23 22 21 16 17 18 19 20 TEST BOARD µBGA™ 9 8 7 6 5 43 dlg 13371T1A-7 2 1 24 23 22 21 16 17 18 19 20 TEST BOARD 9 8 7 6 5 43 dlg 94U-Ø 2 1 24 23 22 21 16 17 18 19 20 13371T1A-6 ® 10 11 12 13 14 15 DCI -35 3697 µBGA™ 10 11 12 13 14 15 DCI -35 3697 94U-Ø 10 11 12 13 14 15 10 11 12 13 14 15 DCI -35 3697 94U-Ø DCI -35 3697 TEST BOARD TEST BOARD 9 8 7 6 5 43 ™ 9 8 7 6 5 43 dlg 94U-Ø µBGA 13371T1A-5 2 1 24 23 22 21 16 17 18 19 20 ® ® 10 11 12 13 14 15 TEST BOARD 9 8 7 6 5 43 94U-Ø µBGA™ dlg DCI -35 3697 ® ® 10 11 12 13 14 15 13371T1A-4 94U-Ø DCI -35 3697 2 1 24 23 22 21 16 17 18 19 20 TEST BOARD 9 8 7 6 5 43 µBGA™ dlg µBGA™ DCI -35 3697 ® 13371T1A-3 TEST BOARD dlg 94U-Ø 2 1 24 23 22 21 16 17 18 19 20 ™ 9 8 7 6 5 43 µBGA 13371T1A-2 2 1 24 23 22 21 16 17 18 19 20 dlg TEST BOARD 9 8 7 6 5 43 13371T1A-1 2 1 24 23 22 21 16 17 18 19 20 µBGA™ 10 11 12 13 14 15 ® 10 11 12 13 14 15 ® 10 11 12 13 14 15 94U-Ø DCI -35 3697 94U-Ø DCI -35 3697 94U-Ø DCI -35 3697 Tessera µBGA TB 13371T1A Not to scale Notes Test board has 10 daisy-chained chip sites per board. Board is made with nickel/gold solder-pad finish. Gerber data for solder stencil is supplied at no charge. Order Number: TB46 TB-74 Test Board Please call for details. TB-188 Test Board TV–188M TV-188M µBGA® DAISY-CHAIN TEST SITE A1 18 17 16 15 14 13 A1 12 19 DAISY CHAIN TV-188M µBGA® DAISY-CHAIN TEST SITE 18 17 16 15 14 13 A1 12 19 11 20 10 9 22 TV-188M µBGA® DAISY-CHAIN TEST SITE 18 17 16 15 14 13 A1 12 19 11 20 10 21 A1 12 10 9 22 12 11 20 10 21 9 22 10 21 9 22 23 8 23 8 23 8 23 8 23 8 24 7 24 7 24 7 24 7 24 7 2 3 4 25 5 6 A1 2 3 4 1 25 TV-188M µBGA DAISY-CHAIN TEST SITE ® 5 6 A1 12 25 ® A1 12 10 9 22 6 2 3 4 25 ® A1 12 11 10 2 3 4 25 ® 18 17 16 15 14 13 A1 12 19 10 9 22 5 6 1 TV-188M µBGA DAISY-CHAIN TEST SITE ® 18 17 16 15 14 13 12 19 11 20 21 9 22 6 11 20 21 5 1 TV-188M µBGA DAISY-CHAIN TEST SITE 18 17 16 15 14 13 19 20 21 5 1 TV-188M µBGA DAISY-CHAIN TEST SITE 18 17 16 15 14 13 19 11 20 2 3 4 1 TV-188M µBGA DAISY-CHAIN TEST SITE 18 17 16 15 14 13 19 11 20 10 21 9 22 10 21 9 22 23 8 23 8 23 8 23 8 23 8 24 7 24 7 24 7 24 7 24 7 2 3 4 25 1 5 6 2 3 4 25 5 6 ® 2 3 4 1 25 ® 5 6 2 3 4 1 25 Tessera µBGA PN 324—0168—REV00 ® 5 6 1 2 3 4 25 5 6 1 TOP The TB–188 test board has 10 daisy-chain test sites on one side, and 10 bias/SIR test sites on the other, for use with the TV–188M µBGA daisy-chain test package on both sides. The two sides are laid out so as to use the same solder stencil aligned to three global fiducial. Notes The test board is not perforated for snap-apart, but it is designed so it can be cut into testable 5–up or 1–up coupons. The drilled holes are for hard wiring with solder for in-situ testing at the panel or coupon level (no plated through-holes). Order Number: TB188 14 18 17 16 15 14 13 19 11 20 21 9 22 TV-188M µBGA® DAISY-CHAIN TEST SITE 18 17 16 15 14 13 19 11 20 21 TEST BOARD TV-188M µBGA® DAISY-CHAIN TEST SITE Not to scale Board is made with nickel/gold solderpad finish. Actual size of board is 2.75" x 6.5". Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Flip Chip Epoxy Encapsulant Chip Substrate FB250 Flip Chip Bump Part Number FB250 FB500 Die Size 250 x 250 mils 500 x 500 mils Bump Pitch Passivation Via UBM Diameter Bump Height Bump Diameter No. of Bumps Max. Bump Diagonal Die Pad Size Metal Thickness Type 457 µm, 18 mil 102 µm 152 µm 140 µm 190 µm 48 7.7 mm 193 x 193 µm 12 kA 98/1/1 Al/Cu/Si 457 µm, 18 mil 102 µm 152 µm 140 µm 190 µm 96 16.5 mm 193 x 193 µm 12 kA 98/1/1 Al/Cu/Si FA10-200 or FA10-400 200 x 200 mils 400 x 400 mils 254 µm, 10 mil 80 µm 102 µm 110 µm 135 µm 317 7.9 mm 127 x 127 µm 12 kA 98/1/1 Al/Cu/Si PB8-200 or PB8-400 x 600 200 x 200 mils 400 x 600 mils 203 µm, 8 mil 73 µm 95 µm 98 µm 120 µm 88 — 115 x 115 µm 12 kA 98/1/1 Al/Cu/Si PST2 150 x 150 mils 457 µm, 18 mil 102 µm 152 µm 130 µm 160 µm 21 — 165 x 165 µm 40 kA 98/1/1 Al/Cu/Si Packaging Uncut Wafer* Tray Tape and Reel 5" Wafer 250 x 250 mils (243 Die) 5" Wafer 500 x 500 mils (48 Die) Sawed 5" Wafer 25 per tray 2" sq Waffle Pack Sawed 5" Wafer 6 per tray 2" sq Waffle Pack .400 Pitch Tack Tape 12mm Width .600 Pitch Tack Tape 24mm Width 5" Wafer 200 x 200 mils (379 Die) 400 x 400 mils (86 Die) 5" Wafer 200 x 200 mils (379 Die) 400 x 600 mils (50 Die) 5" Wafer 150 x 150 mils (682 Die) Sawed 5" Wafer Sawed 5" Wafer Sawed 5" Wafer 36 per tray 200 x 200 36 per tray 200 x 200 25 per tray 2" sq Waffle Pack 9 per tray 400 x 400 9 per tray 400 x 600 Waffle Pack Waffle Pack .400 Pitch Tack Tape 12mm Width .400 Pitch Tack Tape 12mm Width Call For Availability *Note: Die count represents expected yield per wafer. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 15 Flip Chip Test Boards Laminate Board Laminate board is double-sided board. One side has 10 pads for the FB250, the other side has 10 pads for the FB500. Ceramic Board Ceramic board is single sided. FB250 ceramic board has 10 pads on one side. The FB500 ceramic board has 10 pads on one side. Order Number: FB250-PCB Top view Order Number: FB500-PCB Bottom view 16 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Flip Chip Test Boards Laminate Board Laminate board is double-sided board. One side has 10 pads for the PB8-2x2, the other side has 10 pads for the PB8-4x6. Ceramic Board Ceramic board is not available. Order Number: PB8-2x2-PCB Top view Order Number: PB8-4x6-PCB Bottom view Laminate Board Laminate is only available for FA10-2x2. Ceramic Board Ceramic is not available. Order Number: FA10-2x2-PCB Top view only Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 17 QFP Plastic Quad Flat Pack Part Number QFP44-10mm-.8mm-3.2 QFP44-10mm-.8mm-3.9 QFP64-14mm-.8mm-3.2 QFP64-14x20mm-1.0mm-3.2 QFP64-14x20mm-1.0mm-3.9 QFP80-14x20mm-.8mm-3.2 QFP80-14x20mm-.8mm-3.9 QFP100-14x20mm-.65mm-3.2 QFP100-14x20mm-.65mm-3.9 QFP120-28mm-.8mm-3.2 QFP120-28mm-.8mm-3.9 QFP160-28mm-.65mm-3.2 QFP160-28mm-.65mm-3.9 QFP208-28mm-.5mm-2.6 QFP240-32mm-.5mm-2.6 QFP256-28mm-.4mm-2.6 QFP304-40mm-.5mm-2.6 Number of Pins 44 44 64 64 64 80 80 100 100 120 120 160 160 208 240 256 304 Body Size Lead Pitch Footprint 10mm sq 10mm sq 14mm sq 14 x 20mm 14 x 20mm 14 x 20mm 14 x 20mm 14 x 20mm 14 x 20mm 28mm sq 28mm sq 28mm sq 28mm sq 28mm sq 32mm sq 28mm sq 40mm sq .8mm .8mm .8mm 1.0mm 1.0mm .8mm .8mm .65mm .65mm .8mm .8mm .65mm .65mm .5mm .5mm .4mm .5mm 3.2mm 3.9mm 3.2mm 3.2mm 3.9mm 3.2mm 3.9mm 3.2mm 3.9mm 3.2mm 3.9mm 3.2mm 3.9mm 2.6mm 2.6mm 2.6mm 2.6mm Notes Quantity Per Tray 90/96 90/96 84 50/66 50/66 50/66 50/66 50/66 50/66 24 24 24 24 24 24 24 12 Tape Width 24mm 24mm 32mm 44mm 44mm 44mm 44mm 44mm 44mm 44mm 44mm 44mm 44mm 44mm — 44mm — Tape Pitch 24mm 24mm 24mm 32mm 32mm 32mm 32mm 32mm 32mm 40mm 40mm 40mm 40mm 40mm — 40mm — Quantity Per Reel 500 500 350 350 350 350 350 200 200 200 200 200 200 200 N/A 200 N/A Part Number System All QFPs are standard in JEDEC trays. Tray quantities may vary. Quad Flat Pack QFP44–10mm–.8mm–3.9mm Number of Pins Body Size Lead Footprint Lead Pitch Add “TR” to end of part number for Tape and Reel. D D1 D2 A A1 A2 -B- E E1 E2 -A- 0.10 s -D- 4X e θ1 b θ -C- Seating Plane 0.10 C θ2 R1 R2 -HGage Plane S θ3 18 aaa C A-B D bbb C A-B D 4X ccc M C A-B S D S L 0.25mm L1 c QFP44-10mm-.8mm-3.2mm QFP44-10mm-.8mm-3.9mm Millimeter Inch Millimeter Inch Min Nom Max Min Nom Max Min Nom Max Min Nom Max — 0.100 A — — 2.45 — — 0.096 A — — 2.55 — A1 0.15 0.25 0.35 0.006 0.010 0.014 A1 0.15 0.25 0.35 0.006 0.010 0.014 A2 1.80 2.05 2.20 0.071 0.081 0.087 A2 1.95 2.05 2.10 0.077 0.081 0.083 13.20 BSC. 0.520 BSC. 13.90 BSC. 0.547 BSC. D D 10.00 BSC. 0.394 BSC. 10.00 BSC. 0.394 BSC. D1 D1 13.20 BSC. 0.520 BSC. 13.90 BSC. 0.547 BSC. E E 10.00 BSC. 0.394 BSC. 10.00 BSC. 0.394 BSC. E1 E1 R2 0.13 — 0.30 0.005 — 0.012 R2 0.13 — 0.30 0.005 — 0.012 — R1 0.13 — — 0.005 — — R1 0.13 — — 0.005 — 0º — 7º 0º 3.5º 7º θ 0º — 7º θ 0º 3.5º 7º 0º — — θ1 0º — — 0º — — θ1 0º — — 10º Ref 10º Ref 10º Ref 10º Ref θ2 θ2 7º Ref 7º Ref 7º Ref 7º Ref θ3 θ3 c 0.11 0.15 0.23 0.004 0.006 0.009 c 0.11 0.15 0.23 0.004 0.006 0.009 L 0.73 0.88 1.03 0.029 0.035 0.041 L 0.73 0.88 1.03 0.029 0.035 0.041 1.60 0.063 1.95 Ref 0.077 Ref L1 L1 — — S 0.20 — — 0.008 — S 0.40 — — 0.016 — b 0.30 0.35 0.45 0.012 0.014 0.018 b 0.30 0.35 0.45 0.012 0.014 0.018 0.80 BSC. 0.031 BSC. 0.80 BSC. 0.031 BSC. e e 8.00 0.315 8.0 0.315 D2 D2 8.00 0.315 8.0 0.315 E2 E2 Tolerances of Form and Position Tolerances of Form and Position 0.25 0.010 0.25 0.010 aaa aaa 0.20 0.008 0.20 0.008 bbb bbb — 0.008 — ccc — 0.20 — — 0.008 — ccc — 0.20 — Note: Control dimensions are in millimeters. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com QFP A D D1 D2 A1 0.10 s A2 -D- E E1 E2 -A- -B- QFP64-14x20mm-1.0mm-3.2mm QFP64-14x20mm-1.0mm-3.9mm Millimeter Inch Millimeter Inch Min Nom Max Min Nom Max Min Nom Max Min Nom Max — — 3.40 — — 0.134 A — — 3.40 — — 0.134 A — A1 0.25 — — 0.010 — A1 0.15 0.25 0.35 0.006 0.010 0.014 A2 2.50 2.72 2.90 0.098 0.107 0.114 A2 2.55 2.72 3.05 0.100 0.107 0.120 23.20 BSC. 0.913 BSC. 23.90 BSC. 0.941 BSC. D D 20.00 BSC. 0.787 BSC. 20.00 BSC. 0.787 BSC. D1 D1 17.90 BSC. 0.677 BSC. 17.90 BSC. 0.705 BSC. E E 14.00 BSC. 0.551 BSC. 14.00 BSC. 0.551 BSC. E1 E1 aaa C A-B D 4X L1 R2 0.13 — 0.30 0.005 — 0.012 R2 0.13 — 0.30 0.005 — 0.012 bbb C A-B D 4X — — R1 0.13 — — 0.005 — R1 0.13 — — 0.005 — c ccc M C A-B S D S 0º — 7º 0º — 7º 0º 3.5º 7º 0º 3.5º 7º θ θ 0º — — 0º — — — — θ1 θ1 0º — — 0º 7º Ref 7º Ref 7º Ref 7º Ref Alloy 42 L/F θ2, θ3 θ2, θ3 -C15º Ref 15º Ref 15º Ref 15º Ref Copper L/F θ2, θ3 θ2, θ3 ddd C c 0.11 0.15 0.23 0.004 0.006 0.009 c 0.11 0.15 0.23 0.004 0.006 0.009 Seating Plane L 0.73 0.88 1.03 0.029 0.035 0.041 L 0.73 0.88 1.03 0.029 0.035 0.041 1.60 Ref 0.063 Ref 1.95 Ref 0.077 Ref L1 L1 — — S 0.20 — — 0.008 — S 0.40 — — 0.016 — b 0.35 0.40 0.50 0.014 0.016 0.020 b 0.35 0.40 0.50 0.014 0.016 0.020 1.00 BSC. 0.039 BSC. 1.00 BSC. 0.039 BSC. e e 18.00 Ref. 0.709 Ref. 18.00 Ref. 0.709 Ref. D2 D2 12.00 Ref. 0.472 Ref. 12.00 Ref. 0.472 Ref. E2 E2 Tolerances of Form and Position Tolerances of Form and Position 0.25 0.010 0.25 0.010 aaa aaa 0.20 0.008 0.20 0.008 bbb bbb ccc — 0.20 — — 0.008 — ccc — 0.20 — — 0.008 — ddd — 0.10 — — 0.004 — Note: Control dimensions are in millimeters. e b θ1 θ θ2 R1 R2 -H- Gage Plane S θ3 A A1 A2 D D1 E E1 R2 R1 θ L 0.25mm QFP80-14x20mm-.8mm-3.2mm Millimeter Inch Min Nom Max Min Nom Max — — 3.40 — — 0.134 0.25 — — 0.010 — — 2.50 2.72 2.90 0.098 0.107 0.114 23.20 BSC. 0.913 BSC. 20.00 BSC. 0.787 BSC. 17.90 BSC. 0.677 BSC. 14.00 BSC. 0.551 BSC. 0.13 — 0.30 0.005 — 0.012 0.13 — — 0.005 — — 0º — 7º 0º — 7º A A1 A2 D D1 E E1 R2 R1 θ 0º — — 0º — — θ1 θ1 7º Ref 7º Ref Alloy 42 L/F θ2, θ3 θ2, θ3 15º Ref 15º Ref Copper L/F θ2, θ3 θ2, θ3 c 0.11 0.15 0.23 0.004 0.006 0.009 c L 0.73 0.88 1.03 0.029 0.035 0.041 L 1.60 Ref 0.063 Ref L1 L1 — S 0.20 — — 0.008 — S b 0.30 0.35 0.45 0.012 0.014 0.018 b 0.80 BSC. 0.031 BSC. e e 18.40 Ref. 0.724 Ref. D2 D2 12.00 Ref. 0.472 Ref. E2 E2 Tolerances of Form and Position 0.25 0.010 aaa aaa 0.20 0.008 bbb bbb ccc — 0.20 — — 0.008 — ccc ddd — 0.10 — — 0.004 — Note: Control dimensions are in millimeters. QFP80-14x20mm-.8mm-3.9mm Millimeter Inch Min Nom Max Min Nom Max — — 3.40 — — 0.134 0.15 0.25 0.35 0.006 0.010 0.014 2.55 2.72 3.05 0.100 0.107 0.120 23.90 BSC. 0.941 BSC. 20.00 BSC. 0.787 BSC. 17.90 BSC. 0.705 BSC. 14.00 BSC. 0.551 BSC. 0.13 — 0.30 0.005 — 0.012 0.13 — — 0.005 — — 0º 3.5º 7º 0º 3.5º 7º A A1 A2 D D1 E E1 R2 R1 θ — — θ1 7º Ref θ2, θ3 15º Ref 15º Ref θ2, θ3 0.11 0.15 0.23 0.004 0.006 0.009 c 0.73 0.88 1.03 0.029 0.035 0.041 L 1.95 Ref 0.077 Ref L1 0.40 — — 0.016 — — S 0.30 0.35 0.45 0.012 0.014 0.018 b 0.80 BSC. 0.031 BSC. e 18.40 Ref. 0.724 Ref. D2 12.00 Ref. 0.472 Ref. E2 Tolerances of Form and Position 0.25 0.010 aaa 0.20 0.008 bbb — 0.20 — — 0.008 — ccc ddd 0º — — 7º Ref 0º QFP100-14x20mm-.65mm-3.2mm Millimeter Inch Min Nom Max Min Nom Max — — 3.40 — — 0.134 0.25 — — 0.010 — — 2.50 2.72 2.90 0.098 0.107 0.114 23.20 BSC. 0.913 BSC. 20.00 BSC. 0.787 BSC. 17.90 BSC. 0.677 BSC. 14.00 BSC. 0.551 BSC. 0.13 — 0.30 0.005 — 0.012 0.13 — — 0.005 — — 0º — 7º 0º — 7º A A1 A2 D D1 E E1 R2 R1 θ — — θ1 7º Ref θ2, θ3 15º Ref 15º Ref θ2, θ3 0.11 0.15 0.23 0.004 0.006 0.009 c 0.73 0.88 1.03 0.029 0.035 0.041 L 1.60 Ref 0.063 Ref L1 0.20 — — 0.008 — — S 0.22 0.30 0.38 0.009 0.012 0.015 b 0.65 BSC. 0.026 BSC. e 18.85 Ref. 0.742 D2 12.35 Ref. 0.486 E2 Tolerances of Form and Position 0.25 0.010 aaa 0.20 0.008 bbb — 0.13 — — 0.005 — ccc — 0.10 — — 0.004 — 0º — — 7º Ref 0º QFP100-14x20mm-.65mm-3.9mm Millimeter Inch Min Nom Max Min Nom Max — — 3.40 — — 0.134 0.15 0.25 0.35 0.006 0.010 0.014 2.55 2.72 3.05 0.100 0.107 0.120 23.90 BSC. 0.941 BSC. 20.00 BSC. 0.787 BSC. 17.90 BSC. 0.705 BSC. 14.00 BSC. 0.551 BSC. 0.13 — 0.30 0.005 — 0.012 0.13 — — 0.005 — — 0º 3.5º 7º 0º 3.5º 7º 0º — — 7º Ref 0º — — 7º Ref 15º Ref 15º Ref 0.11 0.15 0.23 0.004 0.006 0.009 0.73 0.88 1.03 0.029 0.035 0.041 1.95 Ref 0.077 Ref 0.40 — — 0.016 — — 0.22 0.30 0.38 0.009 0.012 0.015 0.65 BSC. 0.026 BSC. 18.85 Ref. 0.742 Ref. 12.35 Ref. 0.486 Ref. Tolerances of Form and Position 0.25 0.010 0.20 0.008 — 0.12 — — 0.005 — Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 19 QFP D D1 D2 A A2 A1 E E1 E2 -B- -A- 0.10 s -D- 4X e θ1 aaa C A-B D 4X bbb C A-B D L1 c ccc M C A-B S D S b θ -C- Seating Plane 0.10 C θ2 R1 R2 -H- Gage Plane S θ3 QFP120-28mm-.8mm-3.2mm Millimeter Inch Min Nom Max Min Nom Max — — 4.10 — — 0.161 0.25 — — 0.010 — — 3.20 3.32 3.60 0.126 0.131 0.142 31.20 BSC. 1.228 BSC. 28.00 BSC. 1.102 BSC. 31.20 BSC. 1.228 BSC. 28.00 BSC. 1.102 BSC. 0.13 — 0.30 0.005 — 0.012 0.13 — — 0.005 — — 0º — 7º 0º — 7º 0º — — 0º — — 8º Ref 8º Ref 8º Ref 8º Ref 0.11 0.15 0.23 0.004 0.006 0.009 0.73 0.88 1.03 0.029 0.035 0.041 1.60 Ref 0.063 Ref 0.20 — — 0.008 — — 0.30 0.35 0.45 0.012 0.014 0.018 0.80 BSC. 0.031 BSC. 23.20 0.913 23.20 0.913 Tolerances of Form and Position 0.25 0.010 0.20 0.008 — 0.20 — — 0.008 — L 0.25mm QFP120-28mm-.8mm-3.9 Millimeter Inch Min Nom Max Min Nom Max — 0.160 A A — — 4.07 — A1 A1 0.15 0.25 0.35 0.006 0.010 0.014 A2 A2 3.17 3.32 3.67 0.125 0.131 0.144 31.90 BSC. 1.256 BSC. D D 28.00 BSC. 1.102 BSC. D1 D1 31.90 BSC. 1.256 BSC. E E 28.00 BSC. 1.102 BSC. E1 E1 R2 R2 0.13 — 0.30 0.005 — 0.012 — R1 R1 0.13 — — 0.005 — 0º 3.5º 7º θ θ 0º 3.5º 7º 0º — — θ1 θ1 0º — — 8º Ref 8º Ref θ2 θ2 8º Ref 8º Ref θ3 θ3 c c 0.11 0.15 0.23 0.004 0.006 0.009 L L 0.73 0.88 1.03 0.029 0.035 0.041 1.95 Ref 0.077 Ref L1 L1 — S S 0.40 — — 0.016 — b b 0.30 0.35 0.45 0.012 0.014 0.018 0.80 BSC. 0.031 BSC. e e 23.20 0.913 D2 D2 23.20 0.913 E2 E2 Tolerances of Form and Position 0.25 0.010 aaa aaa 0.20 0.008 bbb bbb ccc ccc — 0.10 — — 0.004 — ddd — 0.20 — — 0.008 — Note: Control dimensions are in millimeters. 20 A A1 A2 D D1 E E1 R2 R1 θ θ1 θ2 θ3 c L L1 S b e D2 E2 aaa bbb ccc QFP160-28mm-.65mm-3.2 Millimeter Inch Min Nom Max Min Nom Max — — 4.10 — — 0.161 0.25 — — 0.010 — — 3.20 3.32 3.60 0.126 0.131 0.142 31.20 BSC. 1.228 BSC. 28.00 BSC. 1.102 BSC. 31.20 BSC. 1.228 BSC. 28.00 BSC. 1.102 BSC. 0.13 — 0.30 0.005 — 0.012 0.13 — — 0.005 — — 0º — 7º 0º — 7º 0º — — 0º — — 8º Ref 8º Ref 8º Ref 8º Ref 0.11 0.15 0.23 0.004 0.006 0.009 0.73 0.88 1.03 0.029 0.035 0.041 1.60 Ref 0.063 Ref 0.20 — — 0.008 — — 0.22 0.30 0.38 0.009 0.012 0.015 0.65 BSC. 0.026 BSC. 25.35 0.998 25.35 0.998 Tolerances of Form and Position 0.25 0.010 0.20 0.008 — 0.13 — — 0.005 — A A1 A2 D D1 E E1 R2 R1 θ θ1 θ2 θ3 c L L1 S b e D2 E2 aaa bbb ccc ddd QFP160-28mm-.65mm-3.9 Millimeter Inch Min Nom Max Min Nom Max — — 4.07 — — 0.160 0.15 0.25 0.35 0.006 0.010 0.014 3.17 3.32 3.67 0.125 0.131 0.144 31.90 BSC. 1.256 BSC. 28.00 BSC. 1.102 BSC. 31.90 BSC. 1.256 BSC. 28.00 BSC. 1.102 BSC. 0.13 — 0.30 0.005 — 0.012 0.13 — — 0.005 — — 0º 3.5º 7º 0º 3.5º 7º 0º — — 0º — — 8º Ref 8º Ref 8º Ref 8º Ref 0.11 0.15 0.23 0.004 0.006 0.009 0.73 0.88 1.03 0.029 0.035 0.041 1.95 Ref 0.077 Ref 0.40 — — 0.016 — — 0.22 0.30 0.38 0.009 0.012 0.015 0.65 BSC. 0.026 BSC. 25.35 0.998 25.35 0.998 Tolerances of Form and Position 0.25 0.010 0.20 0.008 — 0.10 — — 0.004 — — 0.12 — — 0.005 — Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com LQFP Low Profile Quad Flat Pack Part Number LQFP32-7mm-.8mm-2.0 LQFP48-7mm-.5mm-2.0 LQFP64-14mm-.8mm-2.0 LQFP64-10mm-.5mm-2.0 LQFP80-10mm-.4mm-2.0 LQFP80-12mm-.5mm-2.0 LQFP80-14mm-.65mm-2.0 LQFP100-14mm-.5mm-2.0 LQFP100-14x20mm-.65mm-2.0 LQFP120-14mm-.4mm-2.0 LQFP144-20mm-.5mm-2.0 LQFP168-14mm-.3mm-2.0 LQFP176-20mm-.4mm-.2.0 LQFP176-24mm-.5mm-2.0 LQFP208-28mm-.5mm-2.0 LQFP256-28mm-.4mm-2.0 Number of Pins 32 48 64 64 80 80 80 100 100 120 144 168 176 176 208 256 Body Size Lead Pitch Footprint 7mm sq 7mm sq 14mm sq 10mm sq 10mm sq 12mm sq 14mm sq 14mm sq 14 x 20mm 14mm sq 20mm sq 14mm sq 20mm sq 24mm sq 28mm sq 28mm sq .8mm .5mm .8mm .5mm .4mm .5mm .65mm .5mm .65mm .4mm .5mm .3mm .4mm .5mm .5mm .4mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm 2.0mm Quantity Per Tray 250 250 90 160 160 90 90 90 90 90 60 90 60 40 36 36 Notes Part Number System All LQFPs are standard in trays. LQFPs have a body thickness of 1.4mm. Tray quantity may vary. Low Profile Quad Flat Pack Tape Width 16mm 16mm 32mm 24mm 24mm 24mm 32mm 32mm 44mm 32mm 44mm 32mm 44mm 44mm 44mm 44mm Tape Pitch 12mm 12mm 24mm 24mm 24mm 20/24mm 24mm 24mm 24mm 24mm 24mm 24mm 24mm 32mm 40mm 40mm LQFP48–7mm–.5mm–2.0 Body Size Number of Pins Quantity Per Reel 1,000 1,000 1,000 1,000 1,000 1,000 1,000 750 500 750 750 500 500 500 500 500 Lead Footprint Lead Pitch Add “TR” to end of part number for Tape and Reel. QFN Quad Flat Pack Non-Leaded Number of Pads 48 Part Number QFN48-7.15x7.15mm-.5mm Body Size Pitch 7.15 x 7.15mm .5mm Part Number System Quad Flat Pack Non-Leaded QFN48-7.15x7.15mm-.5mm Body Size Pad Count Top View 7.15 Max 7.00±0.05 2.50 0.05 Max CO 35 48 48 ø1.0 7.15 Max 2.50 A 0.25±0.10 Typ 36 0.10 Max 7.00±0.05 A Bottom View 1 1 36 Pitch 01 JAPAN A1 ø2.00 0.50 12 3RO 3 24 Surface Roughness: 6±2µm(RZ) A 12 24 0.75 Typ 0.80±0.05 10° Typ 0.1 3° Typ 0.20±0.06 ⊕ 0.13 M 0.125±0.030 RO 15 Typ 0.225 Detail A Section A-A Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 21 BQFP Bumpered Quad Flat Pack Part Number BQFP100-22.6mm-.636mm BQFP132-27.7mm-.636mm Number of Pins 100 132 Body Size Lead Pitch 22.6mm 27.7mm .636mm .636mm Notes Part Number System BQFPs are packaged in JEDEC trays. Call for tape and reel quantity and availability. BQFP packages are expected to be phased out (obsolete) due to low demand. Please call for availability. Bumpered Quad Flat Pack BQFP100–22.6mm–.636mm Lead Pitch Body Size Number of Pins Z C G Y Y D E X B Y W X E D G C Z A Full Radius Optional Grid Placement Courtyard H T S L BQFP Component Dimensions Component Identifier BQFP 100 BQFP 132 L (mm) Min Max 22.10 22.60 27.20 27.20 S (mm) Min Max 20.10 20.71 25.25 25.81 W (mm) Min Max 0.20 0.30 0.20 0.30 T (mm) Min Max 0.75 1.00 0.75 1.00 A (mm) Max 19.35 24.20 B (mm) Max 19.35 24.20 E (mm) Basic 0.635 0.635 H (mm) Max 4.57 4.57 BQFP Land Pattern Dimensions Component Identifier BQFP 100 BQFP 132 22 Z (mm) G (mm) X (mm 23.20 28.20 19.60 24.60 0.35 0.35 Y (mm) Ref 1.80 1.80 C (mm) Ref 21.40 26.40 D (mm) Ref 15.24 20.32 E (mm) Basic 0.63 0.63 Placement Grid (No. of Grid Elements) 50 x 50 58 x 58 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com CQFP Ceramic Quad Flat Pack Part Number 52CQFP-19.0mm-1.27mm 68CQFP-24.1mm-1.27mm 84CQFP-16.5mm-.65mm 100CQFP-19.0mm-.65mm 132CQFP-24.1mm-.65mm 144CQFP-26.6mm-.65mm 172CQFP-29.2mm-.65mm 196CQFP-32.0mm-.50mm Number of Pins 52 68 84 100 132 144 172 196 Notes CQPFs are available with or without combo lid. Pins are flat (sandwiched) with tie bar. Parts are packaged in non-JEDEC trays. Due to the custom nature of the package, body size and dimensions can change without notice. Body Width Lead Pitch 19.0mm sq 24.1mm sq 16.5mm sq 19.0mm sq 24.1mm sq 26.6mm sq 29.2mm sq 32.0mm sq 1.27mm 1.27mm .65mm .65mm .65mm .65mm .65mm .50mm Part Number System 52CQFP–19.0mm–1.27mm I/O Count Ceramic Quad Flat Pack Lead Pitch Body Size LCC Leadless Ceramic Carrier Part Number 16LCC-1.27mm-7.36x8.96mm 20LCC-1.27mm-8.90mm 28LCC-1.27mm-11.5mm 32LCC-1.27mm-11.4x14.0mm 32LCC-1.27mm-11.4x16.5mm 40LCC-1.00mm-10.1mm 48LCC-1.00mm-14.2mm 52LCC-1.27mm-19.0mm 68LCC-1.27mm-24.11mm 84LCC-1.27mm-29.2mm Number of Castellations 16 20 28 32 32 40 48 52 68 84 Pitch Body Size 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm 1.00mm 1.00mm 1.27mm 1.27mm 1.27mm 7.36 x 8.96mm 8.90mm sq 11.5mm sq 11.4 x 14.0mm 11.4 x 16.5mm 10.1mm sq 14.2mm sq 19.0mm sq 24.11mm sq 29.2mm sq Notes Part Number System Number of Body Size 20LCC–1.27mm–8.90mm Castellations Leadless Castellation Pitch Ceramic Carrier LCCs are available with or without combo lid. Gold castellations are standard, but can be solder coated. Parts are packaged in non-JEDEC trays. Parts are available with a daisy-chain configuration upon request. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 23 SOIC Small Outline Integrated Circuit Part Number SO8GT-3.8mm SO14GT-3.8mm SO16GT-3.8mm SO16GT-7.6mm SO20GT-7.6mm SO28GT-7.6mm SO32GT-7.6mm SO20/26JT-7.6mm SO28JT-7.6mm SO40JT-10mm Number of Pins 8 14 16 16 20 28 32 20/26 28 40 Lead Style Gull Gull Gull Gull Gull Gull Gull J-Lead J-Lead J-Lead Body Width 3.8mm 3.8mm 3.8mm 7.6mm 7.6mm 7.6mm 7.6mm 7.6mm 7.6mm 10.0mm Quantity Per Tube 99 50 50 46 38 25 25 25 27 17 Part Number (Tape and Reel) SO8GTR-3.8mm SO14GTR-3.8mm SO16GTR-3.8mm SO16GTR-7.6mm SO20GTR-7.6mm SO28GTR-7.6mm SO32GTR-7.6mm SO20/26JTR-7.6mm SO28JTR-7.6mm SO40JTR-10mm Notes Part Number System Standard lead pitch is 1.27mm. Tube quantity may vary. Small Outline Integrated Circuit Tape Width 12mm 16mm 16mm 16mm 24mm 24mm Tape Pitch 8mm 8mm 8mm 12mm 12mm 12mm 24mm 24mm 44mm 12mm 12mm 16mm Quantity Per Reel 2,500 2,500 2,500 1,000 1,000 1,000 1,000 1,000 1,000 500 SO14GT–3.8mm Body Size Packaging Lead Style Number of Pins Lead Style: G=Gull Wing, J=J-Leaded Packaging: T= Tubes, TR=Tape and Reel B D Grid Placement Courtyard A P W S L C G Z H E X Y SOIC Component Dimensions Component Identifier SO8 SO14 SO16 SO16-7.6mm SO20-7.6mm SO28-7.6mm JEDEC Number MS-012 AA MS-012 AB MS-012 AC MS-013 AA MS-013 AC MO-119 AB L (mm) Min Max 5.80 6.30 5.80 6.30 5.80 6.30 10.00 10.65 10.00 10.65 10.29 10.64 S (mm) Min Max 3.26 4.55 3.26 4.55 3.26 4.55 7.46 8.85 7.46 8.85 8.21 9.01 W (mm) Min Max 0.33 0.51 0.33 0.51 0.33 0.51 0.33 0.51 0.33 0.51 0.36 0.51 T (mm) Min Max 0.40 1.27 0.40 1.27 0.40 1.27 0.40 1.27 0.40 1.27 0.53 1.04 Y (mm) Ref 2.20 2.20 2.20 2.20 2.20 2.20 C (mm) Ref 5.20 5.20 5.20 9.20 9.20 9.20 A (mm) Min Max 3.80 4.00 3.80 4.00 3.80 4.00 7.40 7.60 7.40 7.60 7.40 7.60 B (mm) Min Max 4.80 5.00 8.55 8.75 9.80 10.00 10.10 10.50 12.60 13.00 18.08 18.39 H (mm) Min Max 1.35 1.75 1.35 1.75 1.35 1.75 2.35 2.65 2.35 2.65 2.34 2.64 P (mm) Basic 1.27 1.27 1.27 1.27 1.27 1.27 SOIC Land Pattern Dimensions Component Identifier SO8 SO14 SO16 SO16-7.6mm SO20-7.6mm SO28-7.6mm 24 Z (mm) G (mm) X (mm) 7.40 7.40 7.40 11.40 11.40 11.40 3.00 3.00 3.00 7.00 7.00 7.00 0.60 0.60 0.60 0.60 0.60 0.60 D (mm) Ref 3.81 7.62 8.89 8.89 11.43 16.51 E (mm) Ref 1.27 1.27 1.27 1.27 1.27 1.27 Placement Grid (No. of Grid Elements) 12 x 16 20 x 16 22 x 16 22 x 22 28 x 24 38 x 24 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com TSOP Thin Small Outline Package – Type I Part Number TI-TSOP20/24-6x14.4mm-.5mm TI-TSOP28-8.1x11.8mm-.55mm TI-TSOP28/32-8x18.4mm-.5mm TI-TSOP32-8x18.4mm-.5mm TI-TSOP40-10x18.4mm-.5mm TI-TSOP48-12x18.4mm-.5mm Number of Pins 20/24 28 28/32 32 40 48 Lead Pitch .5mm .55mm .5mm .5mm .5mm .5mm Body Size 6 x 14.4mm 8.1 x 11.8mm 8 x 18.4mm 8 x 18.4mm 10 x 18.4mm 12 x 18.4mm Quantity Per Tray 240 234 156 156 120 96 Tape Width 24mm 24mm 32mm 32mm 32mm 32mm Tape Pitch 12mm 12mm 12/16mm 12/16mm 16mm 16mm Quantity Per Reel 1,000 1,000 1,000 1,000 1,000 1,000 Thin Small Outline Package – Type II Part Number TII-TSOP20/26-7.6x17.14mm-1.27mm TII-TSOP24/26-7.6x17.14mm-1.27mm TII-TSOP24/28-10.16x18.41mm-1.27 TII-TSOP26-7.6mmx17.14mm-1.27mm TII-TSOP32-10.16x20.95mm-1.27mm TII-TSOP40/44-10.16x18.42mm-.8mm TII-TSOP44-10.16x18.42mm-.8mm TII-TSOP50-10.16x20.95mm-.8mm TII-TSOP54-10.16x22.22mm-.8mm TII-TSOP54-12.7x22.22mm-.8mm Number of Pins 20/26 24/26 24/28 26 32 40/44 44 50 54 54 Body Size 7.6 x 17.14mm 7.6 x 17.14mm 10.16 x 18.41mm 7.6 x 17.14mm 10.16 x 20.95mm 10.16 x 18.42mm 10.16 x 18.42mm 10.16 x 20.95mm 10.16 x 22.22mm 12.7 x 22.22mm Notes Standard packaging is in JEDEC trays or tape and reel (quantities may vary). Body dimensions are measured by body length and width. Type I means that pins extend from the narrow end (the width) of the body. Type II means that pins extend from the wide end (the length) of the body. Lead Pitch 1.27mm 1.27mm 1.27mm 1.27mm 1.27mm .8mm .8mm .8mm .8mm .8mm Quantity Per Tray 176 176 100 176 117 135 135 117 108 84 Tape Width 24mm 24mm 32mm 24mm 32mm 32mm 32mm 32mm 44mm 44/32mm Tape Pitch 12mm 12mm 16mm 12mm 16mm 16mm 16mm 16mm 20mm 20mm Part Number System Type I or Type II TI–TSOP28–8.1x11.8mm–.5mm Thin Small Outline Package Number of Pins Quantity Per Reel 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 Lead Pitch Body Size Add “T” to end of part number for Tray. Add “TR” to end of part number for Tape and Reel. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 25 SSOP Small Shrink Outline Package Number of Pins 8 14 16 20 24 28 48 56 64 Part Number SSOP8T-5.3mm SSOP14T-5.3mm SSOP16T-5.3mm SSOP20T-5.3mm SSOP24T-5.3mm SSOP28T-5.3mm SSOP48T-7.6mm SSOP56T-7.6mm SSOP64T-10.2mm Body Width 5.3mm 5.3mm 5.3mm 5.3mm 5.3mm 5.3mm 7.6mm 7.6mm 10.2mm Quantity Per Tube 156 100 80 62 66 47 30 26 — Notes Tape Width Tape Pitch 12mm 12/16mm 12/16mm 16mm 16mm 16/24mm 32mm 32mm 44mm 8mm 12mm 12mm 12mm 12mm 12mm 12/16mm 12/16mm 16/24mm Quantity Per Reel 2,500 1,000 1,000 1,000 1,000 1,000 1,000 500 500 Part Number System Standard lead pitch is 0.65mm. Standard body width is 5.3mm. Tube quantity may vary. Small Shrink Outline Package Body Width SSOP20T–5.3mm Number of Pins Packaging Packaging: T= Tubes, TR=Tape and Reel SSOP8T-5.3mm to SSOP28T-5.3mm 1.14 Dia .152 DP Max Dia. Pin Y236 .125 DP Max 1.14 1.14 E1 E Top View Bottom View e Datum Plane A1 A A2 Base Plane Seating Plane End View 5 b C D 2 Side View A 8°±1° Typical Base Metal b1 With Lead Finish 7°±5° c c1 R B Gauge Plane 0.25 D b Section BB Seating Plane Note: All dimensions are in millimeters. B Detail A 3 L 1.25 Ref (.049") 1. Dimensions and tolerancing per ANSI Y14.5M-1982. 2. “D” and “E1” are reference datums and do not include mold deflash or protrusions, but do include mold mismatch and are measured at the parting line. Mold deflash or protrusions shall not exceed 0.15 (.006") per side. End flash from the package body shall not exceed 0.15 (.006") per side (D). 3. Dimension “L” is the length of terminal for soldering to a substrate. 4. “N” is the number of terminal positions. 5. Formed leads shall be planar with respect to one another within 0.10 (.004") at seating plane. 6. Dimension “b” does not include dambar protrusion/intrusion. Dambar protrusion to be 0.13 (.005") max per side. A A1 A2 b b1 c c1 D E E1 e L N R Inch .068 .002 .065 .009 .009 .004 .004 .291 .197 .022 .004 D Notes: 26 Common Dimension Nom Max mm Inch mm Inch mm 1.73 .073 1.86 .078 2.00 0.05 .005 0.13 .008 0.20 1.65 .069 1.75 .073 1.85 0.22 .012 0.30 .015 0.38 0.22 .012 0.30 .013 0.33 0.09 .006 0.15 .010 0.25 0.09 .006 0.15 .008 0.21 See The Specific Part Number 7.40 .307 7.80 .323 8.20 5.00 .209 5.30 .221 5.60 .026 Inch 0.65 mm BSC 0.55 .030 0.75 .037 0.95 See The Specific Part Number 0.09 0° 4° 8° Min Note 2 2 3 4 D 2 Part Number SSOP8T-5.3mm SSOP14T-5.3mm SSOP16T-5.3mm SSOP20T-5.3mm SSOP24T-5.3mm SSOP28T-5.3mm 4 N 8 14 16 20 24 28 Min Inch .106 .232 .232 .271 .311 .390 Nom mm 2.70 5.90 5.90 6.90 7.90 9.90 Inch .118 .244 .244 .283 .323 .402 mm 3.00 6.20 6.20 7.20 8.20 10.20 Max Inch .130 .256 .256 .295 .334 .413 mm 3.30 6.50 6.50 7.50 8.50 10.50 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com SSOP 0.010" C A—B S D S -B48 25 0.010° E1 E θ Gauge Plane L 1 24 -A- b -D- Detail F 0.007" M C A—B S D S D c A2 A Seating Plane -Ce L1 A1 0.004" C SSOP 48T-7.6mm See Detail F Notes: Min 2.41 0.20 2.26 0.20 0.13 15.75 7.39 1. Dimension D does not include mold flash, protrusions or gate burs. Mold flash protrusions or gate burs shall not exced 0.006 per side. 2. Dimension E1 does not include interlead flash or prorusion. Interlead flash or protrusion shall not exceed 0.015 per side. Millimeter Nom 2.59 0.30 2.39 0.25 0.20 15.88 7.49 0.64 BSC 10.31 0.76 1.42 Max 2.79 0.40 2.52 0.34 0.25 16.00 7.59 A A1 A2 b c D E1 e 10.03 10.67 E 0.51 1.02 L L1 0° 8° θ Note: Controlling Dimension — Inch 0.010" C A—B S D S Min 0.095 0.008 0.089 0.008 0.005 0.620 0.291 0.395 0.020 Inch Nom 0.102 0.012 0.094 0.010 0.008 0.625 0.295 0.025 BSC 0.406 0.030 0.056 0° Max 0.110 0.016 0.099 0.0135 0.010 0.630 0.299 0.420 0.040 8° -B29 56 0.010° E1 E θ Gauge Plane L 1 -A- b 28 -D- Detail F 0.007" M C A—B S D S D c A2 A Seating Plane -Ce L1 A1 0.004" C Notes: 1. Dimension D does not include mold flash, protrusions or gate burs. Mold flash protrusions or gate burs shall not exced 0.006 per side. 2. Dimension E1 does not include interlead flash or prorusion. Interlead flash or protrusion shall not exceed 0.015 per side. SSOP 56T-7.6mm See Detail F Min 2.41 0.20 2.26 0.20 0.13 18.29 7.39 Millimeter Nom 2.59 0.30 2.39 0.25 0.20 18.42 7.49 0.64 BSC 10.31 0.76 1.42 Max 2.79 0.40 2.52 0.34 0.25 18.54 7.59 A A1 A2 b c D E1 e 10.03 10.67 E 0.51 1.02 L L1 0° 8° θ Note: Controlling Dimension — Inch Min 0.095 0.008 0.089 0.008 0.005 0.720 0.291 0.395 0.020 Inch Nom 0.102 0.012 0.094 0.010 0.008 0.725 0.295 0.025 BSC 0.406 0.030 0.056 0° Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Max 0.110 0.016 0.099 0.0135 0.010 0.730 0.299 0.420 0.040 8° 27 TSSOP Thin Shrink Small Outline Package Part Number TSSOP8T-4.4mm TSSOP14T-4.4mm TSSOP16T-4.4mm TSSOP20T-4.4mm TSSOP24T-4.4mm TSSOP28T-4.4mm TSSOP38T-4.4mm TSSOP48T-6.1mm TSSOP56T-6.1mm Number of Pins 8 14 16 20 24 28 38 48 56 Notes Body Width Tape Width Tape Pitch 4.4mm 4.4mm 4.4mm 4.4mm 4.4mm 4.4mm 4.4mm 6.1mm 6.1mm 12/16mm 12/16mm 12/16mm 16mm 16mm 16mm 16mm 24mm 24mm 8mm 8mm 8mm 8/12mm 8/12mm 8/12mm 8/12mm 12mm 12mm Quantity Per Tube 100 96 96 76 63 50 43 39 35 Quantity Per Reel 1,000/2,500 1,000/2,500 1,000/2,500 1,000/2,500 1,000/2,500 1,000 1,000 1,000 1,000 Part Number System Standard lead pitch is 0.65mm. Standard body width is 5.3mm. Tube quantity may vary. Thin Shrink Small Outline Package TSSOP8T–4.4mm Number of Pins Body Width Packaging Packaging: T= Tubes, TR=Tape and Reel 28 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com SON Small Outline Non-Leaded Package Number of Pads 20 24 40 46 Part Number SON20-5.45x7.45mm-.65mm SON24-5.85x8.05mm-.65mm SON40-10.10x10.75mm-.5mm* SON46-10.10x12.00mm-.5mm* Body Size Pitch 5.45 x 7.45mm 5.85 x 8.05mm 10.10 x 10.75mm 10.10 x 12.00mm .65mm .65mm .5mm .5mm Note Part Number System Parts are packaged in trays or tubes. Small Outline Non-Leaded SON20–5.45x7.45mm–.65mm Package Body Size Pad Count SON 20 Pin Surface Roughness: 6±2µm(RZ) Top View 1 20 0.05 Max 10 1.00 Bottom View 0.25±0.06 ø1.0 0.51±0.10 A 0.65 10 0.675 Typ 2.20 1 20 Mark (Cavity) Top Side 5.45 Max A 5.30±0.05 A1 1.00 Pitch 0.50±0.10 0.80±0.05 7.45 Max 7.20±0.05 10° Typ 3° Typ 0.1 0.30±0.06 0.13 M RO 15 Typ 0.125±0.030 0.225 Detail A Section A-A Top View Exposed Pad SON 24 Pin Surface Roughness: 6±2µm(RZ) RO 15 Typ Bottom View 0.27±0.06 1.00 5.85 Max 2.50 5.60±0.05 3.10 2.20 ø1.0 A1 Mark (Cavity) Top Side 4-10° 0.65 0.325 Typ 0.50±0.10 1.00 4-10° 0.05 Max 8.05 Max 7.80±0.05 0.50±0.10 0.60±0.05 0.1 0.24±0.06 ⊕ 0.13 M 0.125±0.030 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 29 PLCC Plastic Leaded Chip Carrier Part Number (In Tubes) PLCC20T PLCC28T PLCC32T PLCC44T PLCC52T PLCC68T PLCC84T Pin Count Body Size 20 28 32 44 52 68 84 8.8mm 11.4mm 11.4 x 13mm 16.5mm 19.0mm 24.1mm 29.2mm Quantity Per Tube 48 38 30 28 24 17 15 Part Number (Tape and Reel) PLCC20TR PLCC28TR PLCC32TR PLCC44TR PLCC52TR PLCC68TR PLCC84TR Notes Tape Width Tape Pitch 16mm 24mm 24mm 32mm 32mm 44mm 44mm 12mm 16mm 16mm 24mm 24mm 32mm 36mm Quantity Per Reel 1,000 750 750 500 500 250 250 Part Number System All PLCCs have “J” leads. 13" reels are standard. Tube quantity may vary. Standard lead pitch is 1.27mm (50 mils). PLCCs are to JEDEC standards. Plastic Leaded Chip Carrier Packaging Number of Pins Packaging: T= Tubes, TR=Tape and Reel Z G A H PLCC20T Y X Full Radius Optional S J L E D C B P W Heel L T Grid Placement Courtyard C PLCC Component Dimensions Component Identifier PLCC-20 PLCC-28 PLCC-44 PLCC-52 PLCC-68 PLCC-84 L (mm) Min Max 9.78 10.03 12.32 12.57 17.40 17.65 19.94 20.19 25.02 25.27 30.10 30.35 S (mm) Min Max 5.78 6.53 8.32 9.07 13.40 14.15 15.94 16.69 21.02 21.77 26.10 26.85 W (mm) Min Max 0.33 0.53 0.33 0.53 0.33 0.53 0.33 0.53 0.33 0.53 0.33 0.53 T (mm) Min Max 1.50 2.00 1.50 2.00 1.50 2.00 1.50 2.00 1.50 2.00 1.50 2.00 A (mm) Min Max 8.89 9.04 11.43 11.58 16.51 16.66 19.05 19.20 24.13 24.33 29.21 29.41 B (mm) Min Max 8.89 9.04 11.43 11.58 16.51 16.66 19.05 19.20 24.13 24.33 29.21 29.41 J (mm) Ref 7.87 10.41 15.49 18.03 23.11 28.19 H (mm) Max 4.57 4.57 4.57 5.08 5.08 5.08 P (mm) Basic 1.27 1.27 1.27 1.27 1.27 1.27 PLCC Land Patterns Component Identifier PLCC-20 PLCC-28 PLCC-44 PLCC-52 PLCC-68 PLCC-84 30 Z (mm) G (mm) X (mm) 10.80 13.40 18.40 21.00 26.00 31.20 6.40 9.00 14.00 16.60 21.60 26.80 0.60 0.60 0.60 0.60 0.60 0.60 Y (mm) Ref 2.20 2.20 2.20 2.20 2.20 2.20 C (mm) Ref 8.60 11.20 16.20 18.80 23.80 29.00 D (mm) Ref 5.08 7.62 12.70 15.24 20.32 25.40 E (mm) Ref 1.27 1.27 1.27 1.27 1.27 1.27 Placement Grid (No. of Elements) 24 x 24 30 x 30 40 x 40 44 x 44 54 x 54 66 x 66 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com SMT Surface Mount Transistors Part Number SC90-TR (Supermini) SOT323-TR SOT325-TR SOT326-TR SOT23-TR SOT25-TR SOT26-TR SOT143-TR SOT89-TR SOT223-TR DPAK(TO-252)-TR D2PAK(TO-263)-TR Number of Pins 3 3 5 6 3 5 6 4 3 3 Body Size -A1.6mm 2.0mm 2.0mm 2.0mm 2.9mm 2.9mm 2.9mm 2.9mm 4.5mm 6.7mm 6.5mm 10.29mm Body Leads -S1.6mm 2.1mm 2.1mm 2.1mm 2.4mm 2.4mm 2.8mm 2.8mm 4.0mm 7.3mm 9.5mm 15.88mm SC Device SC-75A SC-70 SC-88A SC-88 SC-62 SC-63 Notes Part Number System Carrier pack is plastic for surface mount transistors. Transistor Package Tape Width 8mm 8mm 8mm 8mm 8mm 8mm 8mm 8mm 12mm 12mm 16mm 24mm Tape Pitch 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 4mm 8mm 8mm 12mm SOT326–TR Quantity Per 7" Reel 3,000 3,000 3,000 3,000 3,000 3,000 3,000 3,000 1,000 1,000 2,500 800/1,000 Packaging Packaging: T= Tubes, TR=Tape and Reel S A Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 31 SMC Surface Mount Ceramic Capacitors – Plastic Tape Part Number 0805SMC-PL 1206SMC-PL 1210SMC-PL 1812SMC-PL 1825SMC-PL Body Size (Inch) .08" x .05" .12" x .06" .12" x .10" .18" x .12" .18" x .25" Tape Width (mm) 2.0 x 1.2mm 3.2 x 1.6mm 3.2 x 2.5mm 4.5 x 3.2mm 4.5 x 6.4mm 8mm 8mm 8mm 12mm 12mm Tape Pitch 4mm 4mm 4mm 8mm 8mm Quantity Per 7" Reel 4,000 3,000 3,000 1,100 1,000 Quantity Bulk Cassette 10,000 5,000 — Quantity Per 7" Reel 15,000 10,000 4,000 5,000 4,000 Quantity Bulk Cassette 50,000 50,000 15,000 10,000 5,000 Surface Mount Ceramic Capacitors – Paper Tape Part Number 0201SMC-PA 0402SMC-PA 0603SMC-PA 0805SMC-PA 1206SMC-PA Body Size (Inch) .02" x .01" .04" x .02" .06" x .03" .08" x .05" .12" x .06" Tape Width (mm) 0.6 x 0.3mm 1.0 x .05mm 1.5 x .08mm 2.0 x 1.2mm 3.2 x 1.6mm 8mm 8mm 8mm 8mm 8mm Notes Tape Pitch 2mm 2mm 4mm 4mm 4mm Part Number System Surface mount capacitors come on standard 7" reels (larger quantity reels are available upon request). Plastic carrier tape is non-standard for some carrier sizes. The numeric section of the part number refers to the physical body size (in inches) of the component. For example: Part number 0805SMC-PL has a body size of .08" length by .05" width. Case Size in Inches 0402SMC–PA Tape Type Surface Mount Ceramic Capacitor Tape Type: PA= Paper Tape, PL=Plastic Tape Add “B” at end of part number for bulk. Add “C” at end of part number for bulk cassette feeder. L C T W X S Grid Placement Courtyard G Y H Z SMC Component Dimensions Component Dimensions (mm) (in) 0603 (0201) 1005 (0402) 1608 (0603) 2012 (0805) 3216 (1206) 3225 (1210) 4532 (1812) L (mm) Min 0.57 0.90 1.45 1.80 3.00 3.00 4.20 S (mm) Max 0.63 1.10 1.75 2.20 3.40 3.40 4.80 Min — 0.30 0.45 0.30 1.50 1.50 2.30 W (mm) Max — 0.65 0.97 1.11 2.31 2.31 3.46 Min 0.27 0.40 0.65 1.05 1.40 2.30 3.00 T (mm) Max 0.33 0.60 0.95 1.45 1.80 2.70 3.40 Min — 0.10 0.20 0.25 0.25 0.25 0.25 Max — 0.30 0.50 0.75 0.75 0.75 0.95 H (mm) Max 0.33 0.60 0.85 1.10 1.35 1.35 1.35 SMC Land Pattern Dimensions Component Identifier (mm) (in) 0603 (0201) 1005 (0402) 1608 (0603) 2012 (0805) 3216 (1206) 3225 (1210) 4532 (1812) 32 Z (mm) G (mm) X (mm) 0.72 2.20 2.80 3.20 4.40 4.40 5.80 0.26 0.40 0.60 0.60 1.20 1.20 2.00 0.32 0.70 1.00 1.50 1.80 2.70 3.40 Y (mm) Ref 0.23 0.90 1.10 1.30 1.60 1.60 1.60 C (mm) Ref 0.49 1.40 1.70 1.90 2.80 2.80 3.90 Placement Grid (No. of Grid Elements) — 2x6 4x6 4x8 4 x 10 6 x 10 8 x 12 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com SMR Surface Mount Resistors Part Number 0402SMR-PA 0603SMR-PA 0805SMR-PA 1206SMR-PA 1210SMR-PA Body Size (Inches) .04" x .02" .06" x .03" .08" x .05" .12" x .06" .12" x .10" (mm) 1.0 x .05mm 1.6 x .08mm 2.0 x 1.2mm 3.2 x 1.6mm 3.2 x 2.5mm Tape Width Tape Pitch 8mm 8mm 8mm 8mm 8mm 2mm 4mm 4mm 4mm 4mm Notes Quantity Per 7" Reel 10,000 5,000 5,000 5,000 5,000 Quantity Bulk Cassette 80,000 25,000 10,000 5,000 — Part Number System Surface mount resistors come packaged on paper carrier tape and 7" reels (larger quantities are available upon request). Plastic carrier tape is non-standard for surface mount resistors. The numeric section of the part number refers to the physical body size (in inches) of the component. For example: Part number 0402SMR-PA has a body size of .04" length by .02" width. 0402SMR–PA Body Size in Inches Tape Type Surface Mount Resistor Tape Type: PA= Paper Tape, PL=Plastic Tape Add “B” at end of part number for bulk. Add “C” at end of part number for bulk cassette feeder. Bulk Cassette Feeder 53.3 10.0 1.5 +0.1 -0 3.0+0.2 -0 12.0 6.8 ± 0.1 ±8.8 0.1 ± 0.1 2.0 +0. -0.1 5.0 110 ±0.7 +0. 36.0-0.2 19.0 +0.2 31.5-0 Bulk Case Dimensions in mm. L C T W X S Grid Placement Courtyard G Y H Z SMR Component Dimensions Component Dimensions (mm) (in) 1005 (0402) 1608 (0603) 2012 (0805) 3216 (1206) 3225 (1210) L (mm) Min 1.00 1.50 1.85 3.05 3.05 S (mm) Max 1.10 1.70 2.15 3.35 3.35 Min 0.40 0.70 0.55 1.55 1.55 W (mm) Max 0.70 1.11 1.32 2.32 2.32 Min 0.48 0.70 1.10 1.45 2.34 T (mm) Max 0.60 0.95 1.40 1.75 2.64 Min 0.10 0.15 0.15 0.25 0.25 Max 0.30 0.40 0.65 0.71 0.71 H (mm) Max 0.40 0.60 0.65 0.71 0.71 SMR Land Pattern Dimensions Component Identifier (mm) (in) 1005 (0402) Z (mm) G (mm) X (mm) Y (mm) Ref C (mm) Ref 1.30 Placement Grid (No. of Grid Elements) 2x6 2.20 0.40 0.70 0.90 1608 (0603) 2.80 0.60 1.00 1.10 1.70 4x6 2012 (0805)* 3.20 0.60 1.50 1.30 1.90 4x8 3216 (1206)* 4.40 1.20 1.80 1.60 2.80 4 x 10 3225 (1210)* 4.40 1.20 2.70 1.60 2.80 6 x 10 *Note: If a more robust pattern is desired for wave soldering devices larger than 1608 (0603), add 0.2mm to the Y dimension and consider reducing the X dimension by 30%. Add a “W” suffix to the number; e.g., 103w. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 33 Zero Ohm Zero Ohm Jumper Resistors Part Number 0402SMR-PA-0 0603SMR-PA-0 0805SMR-PA-0 1206SMR-PA-0 Body Size (Inches) .04" x .02" .06" x .03" .08" x .05" .12" x .06" (mm) 1.0 x .05mm 1.6 x .08mm 2.0 x 1.2mm 3.2 x 1.6mm Tape Width Tape Pitch 8mm 8mm 8mm 8mm 4mm 4mm 4mm 4mm Note Part Number System Plastic carrier tape is non-standard for surface mount resistors. Case Size in Inches Quantity 7" Reel 10,000 5,000 5,000 5,000 0402SMR–PA–0 Surface Mount Resistor Zero Ohm Tape Type Tape Type: PA= Paper Tape, PL=Plastic Tape SMTA Surface Mount Tantalum Capacitor Part Number Body Size Case Size Tape Width 3216SMTA-PL 3528SMTA-PL 6032SMTA-PL 7343SMTA-PL 3.2 x 1.6mm 3.5 x 2.8mm 6.0 x 3.2mm 7.3 x 4.3mm A B C D 8mm 8mm 12mm 12mm 4mm 4mm 8mm 8mm Part Number System Notes Quantity 7" Reel 2,000 2,000 500/750 500/750 Tape Pitch Components are molded, surface mount tantalums. Conformal coated tantalums are available. Please call for availability of mil-spec surface mount tantalums. Standard reel size is 7" (larger sizes are available upon request). All tantalum capacitors are on plastic carrier pack. Case Size in 3216SMTA–PL Millimeters Surface Mount Tantalum Capacitor Plastic Carrier Pack C H2 H1 W1 W2 S L X T 2 Places G Y Z Grid Placement Courtyard SMTA Component Dimensions Component Identifier (mm) 3216 3528 6032 7343 L (mm) Min Max 3.00 3.40 3.30 3.70 5.70 6.30 7.00 7.60 S (mm) Min Max 0.80 1.74 1.10 2.04 2.50 3.54 3.80 4.84 W1 (mm) Min Max 1.17 1.21 2.19 2.21 2.19 2.21 2.39 2.41 W2 (mm) Min Max 1.40 1.80 2.60 3.00 2.90 3.50 4.00 4.50 T (mm) Min Max 0.50 1.10 0.50 1.10 1.00 1.60 1.00 1.60 H1 (mm) Max 0.70 0.70 1.00 1.00 H2 (mm) Min 1.80 2.10 2.80 3.10 SMTA Land Pattern Dimensions Component Identifier (mm) 3216 3528 6032 7343 34 Z (mm G (mm) X (mm) 4.80 5.00 7.60 9.00 0.80 1.00 2.40 3.80 1.20 2.20 2.20 2.40 Y (mm) Ref 2.00 2.00 2.60 2.60 C (mm) Ref 2.80 3.00 5.00 6.40 Placement Grid (No. of Grid Elements) 6 x 12 8 x 12 8 x 18 10 x 20 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com SME Surface Mount Electrolytic Capacitors Part Number Body Size Tape Width Tape Pitch 3mm-SME-PL 4mm-SME-PL 5mm-SME-PL 6.3mm-SME-PL 8mm-SME-PL 10mm-SME-PL 3mm 4mm 5mm 6.3mm 8mm 10mm 12mm 12mm 12mm 16mm 16mm 16mm 8mm 8mm 12mm 12mm 12mm 16mm Notes Quantity 13" Reel 2,000 2,000 1,000 1,000 1,000 500 Part Number System Body Size 3mm–SME–PL Surface mount electrolytic capacitors come standard on 15" reels. Components are measured by the diameter of the electrolytic can. Plastic Carrier Pack Surface Mount Electrolytic Capacitor Positive 0.3 Max Plastic Platform C±0.2 0.5 Max X2P 10 16V A±0.2 øD±0.5 B±0.2 E A±0.2 5.4 +0.1 -0.2 0.5~0.8 Negative (mm) øD A B C E 3 1.5 3.3 3.3 0.8 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 6.3 2.4 6.6 6.6 2.2 Melf Diodes Quantity 7" Reel SOD80-TR 1.4 x 3.4mm 2,500 SOD80 Package is also known as LL-34 or DO-213AA. SM1-TR 2.6 x 5.0mm 1,500 Package is also known as LL-41 or DO-213AB. Part Number Body Size 8mm 4mm Quantity 13" Reel 10,000 12mm 4mm 5,000 Tape Width Notes Part Number System Melf Diodes are cylindrical glass or plastic packages. Device/Package A Package Dimension A Dimension B SOD80 (LL34) 3.4 mm 1.5 mm Tape Pitch SOD80–TR Tape and Reel B SM1 (LL41) 5.0 mm 2.8 mm Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 35 TO Through-Hole Transistors Number of Pins 3 3 3 Part Number TO5-3-B TO92-3-B TO220-3-B Part Number System TO5–3–B Transistor Package Packaging Number of Pins Packaging: B=Bulk, T=Tubes, TR=Tape and Reel 4.5 10.0 7.0 4.8 17.0 12.0 8.0 2.5 Min. 5.0 12.7 Min. EBC (1) Emitter (2) Base (3) Collector ECB (1) Emitter (2) Collector (3) Base 2.8 ø3.1 1.8 3.7 4.8 13.5 Min. 0.8 0.5 2.5 5 (1) (2) (3) 1.3 0.55 0.45 2.3 Dimensions: mm 2.54 (1) Base (2) Collector (3) Emitter 2.6 2.54 (1) (2) (3) (1) (2) (3) Dimensions: mm Axial Leaded Resistors Part Number 1/8-W-AR-1.6X3.7mm-TR 1/4-W-AR-2.3X6.5mm-TR 1/2-W-AR-3.5X9.5mm-TR Notes Parts are conformal coated resistors - carbon film type. Part Number System Wattage Size 1/8–W–AR–1.6x3.7mm–TR Axial Resistor Package 36 Tape and Reel Body Size Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Custom PCB Practice Kits Design A Custom PCB Practice Board Or Complete Kit To Meet Your Specific Requirements. Practical Components will help you design custom practice PC boards or complete kits. Use the building blocks below to create your board and start saving time and money using dummy parts and a PCB practice kit. Please contact your service representative for more information. Board Material FR4 (standard) Polyimide Stencil Metal mask stencil is used for solder printing which is available for custom or Practical board. Board Size/Thickness 4" x 5.5" (standard) 8" x 5.5" .062" Other Gerber Data Software data used to create a metal mask stencil for solder paste application. Fiducials/Tooling Holes Doughnut (local and global) Fiducials are used to orient the position of each individual component to populate the board. Tooling holes are .125" X, Y and Theta Data Software used to calibrate pick and place machines for placement of components to PCB. LP/Alpha Level LPI is a photo liquid imageable solder mask that will not interfere with solder paste screen printing. Alpha level (silver flash) Delivery Standard delivery is 4 to 6 weeks. Expedited delivery is available. Parts for PC Board Capacitor Resistor Transistor SOIC PLCC CSBGA QFP LQFP TSOP BGA Tantalum Other Final Product PCB Practice Kit Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 37 Solder Practice Board and Kits PC008 Solder Practice Board PRACTICAL COMPONENTS SO8 SO8 SOJ20 26 SOT23 SO14 SOT143 SOJ20 26 SO14 SOJ20 26 34 14 1 SO8 9 SO20 A QFP44 .8mm PITCH 39 7 SO20 PLCC20 T1+ T1– 23 12 1 1 PLCC20 SO20 H T1+ T1– A 1 1 76 8 29 1 18 PLCC44 H 1 CSBGA48 23 60 10 39 7 12 51 26 QFP44 .8mm PITCH LQFP100 .5mm PITCH 1206 0805 0603 0402 18 SO14 1 9 34 29 SO20 14 8 CSBGA48 0402 0603 0805 1206 E-MAIL: [email protected] SO14 PLCC44 1 60 10 PHONE: 714.899.8309 SO8 DPAK 44 44 27 27 PLCC68 TSOP32 + A TANTALUM + B 0402 C 0603 0805 1206 D P/N PC008 PLCC68 TSOP32 REV C + 0402 0603 + 0805 1206 FAX: 714.899.8599 Top view—actual size of board is 5.5" x 8". A universal PCB to meet all your needs. Rework practice, solder training and evaluation, and for testing and calibration of pick-and-place machines. Part Number CSBGA-8sq.-1.0mm PBGA169-1.5mm-23mm-T PBGA225-1.5mm-27mm-T PBGA352-1.27mm-35mm-T PQFP44-10mm-.8mm-3.9mm PQFP100-14x20mm-.65mm-3.9mm PQFP208-28mm-.5mm-2.6mm PQFP256-28mm-.4mm-2.6mm LQFP100-14mm-.5mm-2.0mm TI-TSOP32-8x20mm-.5mm PLCC20-TR PLCC44-TR PLCC68-TR SO8GTR-3.8mm SO14GTR-7.6mm 38 Number Per Board 2 2 2 2 2 2 2 2 1 2 2 2 2 4 4 Order Number: PCB008 (Board Only) Part Number SO20GTR-7.6mm SO20/26JT-7.6mm SOT23-TR SOT143-TR D Pak(TO252)-TR 3216SMTA-PL 3528SMTA-PL 6032SMTA-PL 7343SMTA-PL 0402SMR-PA 0603SMR-PA 0805SMR-PL 1206SMR-PL PCB008 Board Number Per Board 4 3 4 4 1 1 1 1 1 52 42 36 32 1 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Solder Practice Board and Kits T2+ T3+ T4+ T1– T2– T3– T4– 51 T1+ T1– T2– T3– T4– T1+ T2+ T3+ T4+ T1– T2– T3– T4– T1+ T2+ T3+ T4+ T1– T2– T3– T4– QFP100 .65mm PITCH QFP100 .65mm PITCH QFP256 .4mm PITCH QFP256 .4mm PITCH BGA225 1.5mm PITCH BGA352 1.27mm PITCH BGA169 1.5mm PITCH 31 T4+ 31 T3+ 18 T2+ 18 T1+ 51 PC008 Solder Practice Board T1+ T2+ T3+ T4+ T1– T2– T3– T4– T1+ T2+ T3+ T4+ T1– T2– T3– T4– 157 1 BGA169 1.5mm PITCH BGA225 1.5mm PITCH BGA352 1.27mm PITCH 157 1 105 53 105 53 QFP208 .5mm PITCH QFP208 .5mm PITCH © 1998 PRACTICAL COMPONENTS, INC. Bottom view—actual size of board is 5.5" x 8". PC008 Practice Board Kits Choose from the kits below or create your own custom configuration. Order Number PC008-BGA-6 PC008-BGA-12 PC008-BGA-24 PC008-BGA-48 PC008-QFP-6 PC008-QFP-12 PC008-QFP-24 PC008-QFP-48 PC008-BGA/QFP-6 PC008-BGA/QFP-12 PC008-BGA/QFP-24 PC008-BGA/QFP-48 Quantity Of Parts Per Kit PBGA PBGA 169 225 12 12 24 24 48 48 96 96 12 24 48 96 12 24 48 96 PBGA 352 12 24 48 96 12 24 48 96 Boards 6 12 24 48 6 12 24 48 6 12 24 48 QFP100.65mm QFP208.5mm QFP256.4mm 12 24 48 96 12 24 48 96 12 24 48 96 12 24 48 96 12 24 48 96 12 24 48 96 Note Gerber Data and X,Y Theta Data are available if required at no charge Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 39 PC008 Test Board BGA Daisy-Chain Patterns for the PC008 Test Board BGA 169 Daisy Chain T+3 T-3 T+1 T-1 T-2 T+2 T+4 T-4 T+3 T-3 T+1 T-1 T-2 T+2 T+4 T-4 A D C B E F G H K J L M A N B C D E F G H J K L M T-4 T+4 T+2 T-2 N N M L J K H T-1 T+1 T-3 T+3 E F G D C A B 13 13 13 12 12 12 11 11 11 10 10 10 9 9 9 8 8 8 7 7 7 6 6 6 5 5 5 4 4 4 3 3 3 2 2 2 1 1 1 After Mounting to Test Board Ball View X-Ray View BGA 225 Daisy Chain T+3 1 T-3 T+1 2 4 3 5 T+2 T-1 6 7 8 9 T-2 T+4 10 11 12 13 T-4 T+3 1 14 15 T-3 T+1 2 4 3 5 T+2 T-1 6 7 8 9 T-2 T+4 10 11 12 13 T-4 T-4 T+4 15 14 14 15 A B A B A B C C C D D D E E E F F F G G G H H H J J J K K K L L L M M M N N N P P P R R R T-2 13 12 11 10 After Mounting to Test Board Ball View T+2 9 T-1 8 7 T+1 6 5 4 T-3 3 2 T+3 1 X-Ray View BGA 352 Daisy Chain T+1 T-1 T-2 T+2 T-3 T+3 T+4 T-4 T+1 1 2 3 4 5 6 7 8 9 10 1112 1314 15 16 17 18 19 20 21 22 23 24 25 26 AF AE AD AC AB AA Y W V U T R P N M L K J H G F E D C B A T-2 T+2 T-3 T+3 T+4 T-4 1 2 3 4 5 6 7 8 9 10 1112 1314 15 16 17 18 19 20 21 22 23 24 25 26 T-4 T+4 T+3 T-3 T+2 T-2 T-1 T+1 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 AF AE AD AC AB AA Y W V U T R P N M L K J H G F E D C B A Ball View 40 T-1 AF AE AD AC AB AA Y W V U T R P N M L K J H G F E D C B A After Mounting to Test Board X-Ray View Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com SMTA Saber Board SMTA Saber Evaluation PC Board The SMTA Saber Evaluation PC Board. Practical Components is licensed by SMTA to distribute the Saber Evaluation PC Board. The Saber Board includes land patterns for a wide variety of JEDEC and EIAJ components. SMTA SABER IPC-SM-782A Version The Saber Board is used to evaluate: P&P equipment Reflow process Component placement accuracy Cleanliness Surface Insulation Resistance (SIR) Speed and accuracy of component placement Solder paste screening Screen Test SO16 BQFP100 Screen Test Note .020 Wave Test Gerber Data and X,Y Theta Data are available if required at no charge. QFP208 .010 Wave Test PLCC68 Order Number: PCB-SABER (Board Only) SO16 QFP100 TSOP 32 SOL20 SIR Test Top/bottom view (double-sided) —actual size of board is 3.875" 5.375". DPAK BGA169 (Daisy Chained) SMTA Saber Board Kits Board 0402SMR 0603SMR 0805SMR 1206SMR 1210SMR SOT23 DPAK(TO252) SO16GT-3.8mm SO20GT-7.6mm PLCC68 TI-TSOP32 PQFP208-.5mm PQFP100-.65mm BQFP100-.636mm PBGA169-1.5mm Quantity Per 24 Kits 24 1000 1000 500 500 500 1000 48 100 24 24 24 24 24 24 24 Quantity Per 48 Kits 48 1632 1488 1008 960 672 1152 96 144 48 48 48 48 48 48 48 Quantity Per 96 Kits 96 4000 3000 2000 2000 2000 3000 200 288 96 96 96 96 96 96 96 Order Number: SMTA-24 SMTA-48 SMTA-96 Part Number Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 41 Solder Practice Board PCB003 Solder Practice Board E-MAIL: [email protected] PRACTICAL 0603 29 18 PLCC44 SOIC20 34 1 SOT143 SOT23 0805 12 23 QFP44 –.8 1206 QFP100 –.65mm 157 1 PHONE: 714.899.8309 O.C. A 94V–O DIP14 81 0603 51 39 7 31 SOIC8 0805 1 © 1999 PRACTICAL COMPONENTS, INC. 1206 FAX: 714.899.8599 COMPONENTS 105 0603 QSOP20 P/N PC003 Top View—actual size of board is 2.5" x 2.5". 53 QFP208 –.5mm Bottom View Order Number: PCB003 (Board Only) PCB003 Solder Practice Board Kit Practical Components offers this low cost kit for solder practice and rework. Part Number PQFP208-28mm-.5mm-2.6mm PQFP44-10mm-.8mm-3.2mm PQFP100-14x20mm-3.2mm PLCC44-TR SO8GT-3.8mm SO20GT-7.6mm SOT23-TR SOT143-TR 0603SMR-PA 0805SMR-PA 1206SMR-PA QSOP20T-3.8 DIP14T-3.8mm PCB003 Board Quantity Per Kit 1 1 1 1 1 1 3 2 6 3 6 3 1 1 Order Number: PC003 (Complete Kit) Note Gerber Data and X,Y Theta Data are available if required at no charge 42 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com OMNI Practice And Training Kits Through-Hole Training Kit Kit Contents Qty 15 15 15 15 15 2 15' 15' 10 10 4 Description Turret Terminal Bifurcated Terminal Hook Terminal Pierced Terminal Cup Terminal Printed Wiring Board 22 Gauge Wire 26 Gauge Wire TO5 Transistor Spacer for TO5 TO18 Transistor Qty 4 20 12 10 20 4 6 4 Description Spacer for TO18 1/4 Watt Resistor 1/2 Watt Resistor Diode Capacitor (CKO) Capacitor (Axial) DIPs 14/16 Pin Flat Packs 14 Pin Order Number: TK-1M Through-Hole Recertification Kit Choose the Through-Hole Recertification Kit for verification of soldering operator’s skills for though-hole board technology. This kit provides sufficient components for students to assemble and solder final workmanship samples for evaluation. Kit Contents Qty 1 3 3 7 2 2 1 Description TB3 Through-Hole PWB TO5 Transistor TS5/18 TO5 and TO18 Transistor Spacer RCO7 1/4 Watt Resistor CKO5 Capacitor IC6 16 Lead DIP FP14 14 Lead Flat Pack Order Number: TK-1R Standard Pitch Training Kit Kit Contents Qty 4 10 5 5 2 Description Small Outline IC (SOIC) 16 pin (300 mils wide) Small Outline IC (SOIC) 16 pin (150 mils wide) Plastic Leaded Chip Carrier (PLCC) 20 Pin Leadless Ceramic Chip Carrier (LCC) Plastic Leaded Chip Carrier (PLCC) 44 Pin Qty 14 8 8 16 4 1 Description Small Outline Transistor SOT89 Chip Resistor 1206 Metal Electrode Face Device (Melf) SOD80 Tantalum Capacitor “C” Case (6032) Flat Pack 14 Pin TB4 PWB Order Number: TK-2 Fine Pitch Training Kit Kit Contents This kit contains all the material listed for the TK-2 Standard Pitch Training Kit plus: Qty 4 2 1 Description Quad Flat Packs (QFP) 44 Pin (0.030" Pitch) Quad Flat Packs (QFP) 100 Pin (0.025" Pitch) TB4-TB4FP PWB (Replaces TB4 PWB) Order Number: TK-2FP Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 43 OMNI Training Products Workmanship Acceptance Posters Poster sizes are 17" x 22". P/N: P114 P/N: P115 three times the information in less space, making them more functional, economical and comprehensive. They are ideal for use in training and production areas for continual reference to required quality. These large (17" x 22") full color posters depict acceptance criteria for terminals, through-hole PWB and SMT terminations in accordance with the latest military and IPC specifications. The new format, which includes three different types of connections per poster, requires just one-third the wall area of previous designs. Each poster presents Order Numbers: P111 Turret, Bifurcated Side Route and Bottom Route Terminals P112 Pierced, Hook and Cup Terminals P113 Clinched, Stud and DIP Top-View P114 SMC-LCC, Chip and Melf P115 SMT-Flat Lead (side), Flat Lead (heel) and “J” Leads F100 Metal Poster Frame (Black) SMT Workmanship Criteria on CD-ROM The latest in Surface Mount Technology (SMT) workmanship criteria in a userfriendly CD-ROM format. All criteria is based on the newest industry specifications: IPC-A-610-B and J-STD-001B. This CD-ROM contains over 200 color photographs and 90 line drawings of SMT components, footprints and workmanship criteria, as well as explanatory text descriptions. Order Number: CD-WM12 Minimum System Requirements: 486 or Pentium Processor, Windows 3.1 or higher, 8 MB of RAM, 2X or higher CD-ROM, 16 bit video card and VGA or SVGA monitor. Terminal Holder 1, 7 ......... CT5 Cup Terminal 2, 6 ......... HT3 Hook Terminal 3, 4, 5 ..... TT1 Turret Terminal 1 2 3 4 5 6 Recommended for classroom training. 7 3, 4, 5 ..... BT2 Bifurcated Terminal Order Number: TH-1 This reusable tool safely holds terminals during wiring and soldering operations. Terminals will fit snug in holes when holder is new. The holes are intentionally slightly undersized to allow for expansion with use. 44 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com OMNI Training Products Unified Inspection Criteria Workmanship Manuals Unified Inspection Criteria Workmanship Manuals provide all segments of the electronics manufacturing industry with the latest SMT and through-hole workmanship criteria. Order Numbers: WM7 WM8 Through-Hole Commercial (B/W) Through-Hole Commercial and Military (B/W and Color) WM9 SMT Commercial (B/W) WM10 SMT Commercial and Military (B/W and Color) P/N WM10 P/N WM8 New! Unified Wiring and Soldering Handbook The Unified Wiring and Soldering Handbook has been designed to provide the electronics manufacturing industry with a comprehensive step-by-step training handbook. The use of this cost effective handbook will greatly simplify the training of your soldering personnel. The handbook follows the same format as our Audio Visual Training Programs (sold separately). The easy-to-follow process instructions provide operators with the means for continual reference and skills updating. This spiral bound handbook addresses the workmanship quality standards MILSTD-2000A, IPC-A-61 OA and the new joint industry standard ANSI/J-STD-001. The use of these handbooks will provide training for military, medical and all levels of commercial electronic products. This training handbook is a must for every production area and training department. Each handbook addresses the following areas of workmanship: No. of Pages 4 7 7 7 8 7 12 8 4 Wire Preparation Turret Terminals Bifurcated Terminals Hook Terminals Pierced Terminals Cup Connectors Printed Wiring Boards Appendix 1: Workmanship criteria MIL-STD-2000A and IPC-A-610A Appendix 2: Solder connection criteria Order Number: HBS-3 Soldering Workbook This spiral-bound soldering workbook provides electronics manufacturing personnel with a comprehensive soldering training book addressing: Wire preparation, wiring and soldering terminals, assembly and soldering of through-hole components and also placement and soldering of SMT components. This workbook is also an excellent tool to teach IPC-A 610B or any other commercial, military or in-house quality standard. The generic design allows instructors the opportunity to develop those sections that are applicable to their training program. The Soldering Workbook is a must for every training department. Each page contains detailed drawings with provisions for students to record their notes and applicable workmanship criteria. Order Number: SWB-1 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 45 Weller QFP Lead Repair Kit This Kit Makes It Easy To Repair Bent Leads And Recover Components That Might Otherwise Be Lost. Lab grade true flat granite surface plate provides a stable work surface and ensures coplanarity after lead alignment Lead straightening probes and tweezers make the delicate process of placement of bent probes into the correct depressions easy and repeatable Templates (Available Separately) Patented orientation templates make it easy to manually reshape leads into correct position WLSK1000 Lead Straightening Kit Contents: Templates (Available Separately) Patented Precision Alignment Templates —make it easy to manually reshape bent leads into correct position Lab Grade True Flat Granite Surface Plate 2 Lead Straightening Probes Precision Tweezers Vacuum Pickup Tool Kapton Tape® Rugged Storage Box Replacement Templates—other size templates are available Instruction Manual Templates Included in Kit: Order Number WLSK244 WLSK246 WLSK247 WLSK249 WLSK255 WLSK256 WLSK257 Component Number QFP144 QFP208 QFP240 QFP304 QFP144 QFP160 QFP184 Pitch Pins .5mm .5mm .5mm .5mm .65mm .65mm .65mm 144 208 240 304 144 160 184 Order Number: WLSK1000 Price: $549.50 ® Kapton is a registered trademark of Dupont. 46 Order Number WLSK201 WLSK202 WLSK203 WLSK204 WLSK205 WLSK206 WLSK207 WLSK208 WLSK209 WLSK210 WLSK211 WLSK212 WLSK213 WLSK214 WLSK215 WLSK216 WLSK217 WLSK218 WLSK219 WLSK220 WLSK221 WLSK222 WLSK223 WLSK224 WLSK225 WLSK226 WLSK227 WLSK228 Component Number QFP180 QFP284 QFP40 QFP52 QFP68 QFP84 QFP132 QFP220 QFP256 QFP44 QFP52 QFP68 QFP84 QFP100 QFP132 QFP148 QFP164 QFP196 QFP244 QFP28 QFP36 QFP44 QFP52 QFP68 QFP84 QFP100 QFP40 QFP64 Pitch Pins .015" .015" .02" .02" .02" .02" .02" .02" .02" .025" .025" .025" .025" .025" .025" .025" .025" .025" .025" .05" .05" .05" .05" .05" .05" .05" .4mm .4mm 180 284 40 52 68 84 132 220 256 44 52 68 84 100 132 148 164 196 244 28 36 44 52 68 84 100 40 64 Order Number WLSK229 WLSK230 WLSK231 WLSK232 WLSK233 WLSK234 WLSK235 WLSK236 WLSK237 WLSK238 WLSK239 WLSK240 WLSK241 WLSK242 WLSK243 WLSK245 WLSK248 WLSK250 WLSK251 WLSK252 WLSK253 WLSK254 WLSK258 WLSK259 WLSK260 WLSK261 WLSK262 WLSK263 WLSK264 WLSK265 WLSK266 WLSK267 WLSK268 WLSK269 Component Number QFP80 QFP100 QFP120 QFP176 QFP216 QFP256 QFP286 QFP336 QFP376 QFP32 QFP48 QFP64 QFP80 QFP100 QFP128 RECT QFP176 QFP272 QFP40 QFP52 QFP64 QFP80 QFP100 RECT QFP232 QFP32 QFP44 QFP52 QFP64 QFP80 RECT QFP120 QFP128 QFP36 QFP44 QFP52 QFP64 RECT Pitch Pins .4mm .4mm .4mm .4mm .4mm .4mm .4mm .4mm .4mm .5mm .5mm .5mm .5mm .5mm .5mm .5mm .5mm .65mm .65mm .65mm .65mm .65mm .65mm .8mm .8mm .8mm .8mm .8mm .8mm .8mm 1.0mm 1.0mm 1.0mm 1.0mm 80 100 120 176 216 256 286 336 376 32 48 64 80 100 128 176 272 40 52 64 80 100 232 32 44 52 64 80 120 128 36 44 52 64 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Weller Reballing Kit Reball BGA Components To Original Condition And Save Time And Money! BGA template clamping fixture ensures critical ball placement on the BGA component A vial of 10,000 eutectic solder balls Precision screening/positioning templates for the most common BGA pitches—replacement templates are available The Weller Reballing Kit features patented templates, etched to ensure precise ball placement. BGA components can be reballed to original condition. Used with a temperature controlled hot air rework tool or station, the WPRB1000 saves money. WPRB1000 Kit Contents: 6 Templates Vial of 10,000 Eutectic Solder Balls BGA Template Clamping Fixture Straight Probe Bent Probe Tweezers Screwdriver Spatula Squeegee Flux Pen Kapton® Tape Dummy BGA Component Instruction Manual Templates Included in Kit: Order Number WPRB210 WPRB100F WPRB203 WPRB127F WPRB205 WPRB150F Pitch Matrix 1.00mm 1.00mm 1.27mm 1.27mm 1.50mm 1.50mm Staggered Full Staggered Full Staggered Full Order Number: WPRB1000 Price: $549.50 ® Kapton is a registered trademark of Dupont Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 47 Personal Magnifiers Reduce Eyestrain—Evaluate Surface Features Quickly, Easily and Accurately With Mag-Eyes Personal Magnifiers. APPLICATIONS Electronics Schematics and Printed Circuit Board Assembly/Rework Manufacturing Tooling and Prototype Development Quality Control Gauging and Hands-on Parts Inspection Dentistry X-rays, Lab Work Manual Trades Jewelry Work, Watch Repair Science Sample Studies In Geology, Botany and Biology ➊ ➋ ➌ ➍ ➎ ➏ ➐ Feather-lite, only 50 Grams (1.75 oz.) Magnifier swings up and down, or can be locked in place Modern open design assures unimpaired vision Comfortable during long hours of use Slip-on cushioned headband For use with long or short hair Snap-out interchangeable acrylic lenses (2.5X and 4X) Features Instantly enlarges images and objects Hands-free magnification Can be worn with or without eye-glasses, contact lenses or safety glasses. Optical grade acrylic lenses Distortion-free viewing No Headaches: simple, comfortable and safe Double lens for 3D viewing Wide field of vision Adjustable lens angle One Size Fits All ESD SAFE Model 383-AS ESD SAFE For electronics and clean room environments. The model 383-AS Anti Static Mag-Eyes has all the advanced features of the model 383, but is specifically designed for work areas where Electro Static Discharge is to be avoided or when clean room standards must be met. To comply with these requirements, the 383-AS is molded from solid-state semiconductive material chemically bonded into polymer matrix and has these qualities: Color: black Surface resistivity—“Static Dissipative” range: 106–109 ohms/sq. Static protection is independent of humidity from 0% to 100%. Static resistivity and static decay rate are unaffected by temperature. Static protection is maintained throughout entire life of material. Tribo-electric charging < 20 v. Contains no amine or amide based volatile additives and will not contaminate component surfaces. Clean room compatible, no sloughing—the particle counts are substantially below those limits set for Class 10 clean rooms. Meets stringent German standards for recyclability. Order Numbers: 383 (Regular) $31.95 383-AS (Anti-Static) $39.95 Each unit is shipped complete with 2 lenses (2.5X and 4X) and instruction sheet. 48 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Adjustable Matrix Trays Combination tray shown with quadpack and flatpack supports is for illustration only. Features Hold any size quadpack or flatpack up to 4" long. Plastic supports are molded in PPA with carbon fiber with a surface resistivity of 10E5-10E7 ohm/ch, are non-sloughing and tolerate 170C. Tray and cover are extruded aluminum, finished in ESD safe, clear chromate. ESD foam with conductive film in the cover for cushioning and component thickness variations. Standard unit measures 6" x 12" x 1" with cover. Thumb screws lock the cover to the base. Standoffs on each end for easy location and locking to the cover. Patent No. 5,370,225. Optional Pick and Place Mode Quads only, must be square. Orients devices in accurately registered X–Y positions. Interfaces with standard pick and place machines, e.g. Zevatech, Fuji, Quad, etc. Overall length of .400" less cover. Maximum Capacity For Square Quadpacks Maximum Body Number of Pieces Dimensions Per Row .580 inches ............ 7 1.026 inches ............ 6 1.480 inches ............ 5 1.875 inches ............ 4 2.125 inches ............ 3 Order Numbers: Product Order Number Price Base w/cover for 10 Quadpacks ........................ AMT-6x12 QP .......... $185.50 Base w/cover for 10 Flatpacks ........................... AMT-6x12 FP ............. 185.50 Base w/cover for bottom brazed pkgs. .............. AMT-6x12 QP-B ......... 295.00 Base w/cover P&P for automation (QFP) ........... AMT-6x12 QP-A ......... 325.00 Base, no cover, no supports ..............................AMT-B1 ........................ 68.90 Cover only with anti-static foam ......................... AMT-C1 ........................ 47.40 Anti-static foam ................................................. AMT-A1 .......................... 5.30 Quadpack molded support w/hardware ............. AMT-QP ......................... 3.81 Flatpack molded support w/hardware ................ AMT-SS .......................... 3.81 Note Call for quantity price breaks. Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 49 Vacuum Handling Tools Practical Handi-Vac™ Vacuum Handling Tool 12.7mm (1/2") ESD SAFE An inexpensive tool that no assembler should be without. Replaces tweezers for many applications. ESD safe. ESD safe with antistat treatment. Selection of four probes with vacuum cups included. Includes one 1/4" cup, one 3/8" cup and two 1/8" cups. Easily handles up to 3–ounce objects. 92mm (3 5/8") Totally self-contained vacuum. No batteries to replace. Can be included in all of your tool kits. Good for handling surface mount components. Vacuum-cup rubber is ESD safe. Made in the U.S.A. Order Number: HV-KIT 1–10 Pricing: $11.25 11–25 $10.75 Practical Pen-Vac™ Vacuum Handling Tool Length 146mm (5 3/4") ESD SAFE Rear Storage Cap Quick Change Luer Lock Fitting 1/4" 1/8" 3/8" Fits in your pocket like a pen. ESD safe units are supplied with a clear aluminum finish. Perfect for handling surface mount components. Vacuum-cup rubber is ESD safe. No batteries to replace. Includes two 1/4" cups, two 3/8" cups and two 1/8" cups. No vacuum hoses or power cords to get in your way. Has rear storage cap. Quick change luer lock fitting. Made in the U.S.A. Order Number: V8901-LMS-ESD 1-10 11-25 Pricing: $48.75 $47.00 Practical Bulb-Vac™ Vacuum Handling Tool ESD SAFE 89mm (3.5") 50 39.6mm (1.56") The Bulb-Vac™ Vacuum Handling Tool is for the user who needs very little accuracy when placing parts. The entire tool is constructed of ESD safe materials. A needle protrudes out of the plastic tip to hold the vacuum cup in place. This tool is available in four different styles. Cup Size Order Number BVJ-038 (3/8" diameter vacuum cup) BVJ-050 (1/2" diameter vacuum cup) BVJ-062 (5/8" diameter vacuum cup) BVJ-075 (3/4" diameter vacuum cup) BVJ-038-B BVJ-050-B BVJ-062-B BVJ-075-B 1-10 11-25 $11.25 11.25 11.45 11.45 $10.70 10.70 10.75 10.75 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Vacuum Handling Tools Practical SMD-Vac™-GP Vacuum Handling Tool Is ESD Safe Perfect for pick and place operations. Whisper quiet. Diaphragm pump provides years of continuous service. All components including vacuum cups are ESD safe. Three-wire power cord. Small footprint (3" x 5") consumes minimal bench space. Develops over 5 inches Hg. of vacuum. The SMD-VAC™-GP comes with: ● 110 or 220 volt vacuum source. ● Four feet of 1/8" flexible vacuum hose. ● Four feet of 1/8" coiled vacuum hose. ● A set of seven vacuum tips. ● Optional Vacuum Interrupter facilitates precision placement of SMT capacitors, resistors and MCM die. ESD SAFE Order Numbers: V8000 (for 110 volts) V8000-200 (for 200 volts) Pricing: 1–10 $113.00 11–25 $119.00 Optional Vacuum Interrupter for precision parts placement. Practical Pac-Vac™ Vacuum Handling Tool For Portable Operation The Pack-Vac™ vacuum handling tool is a battery operated self-contained unit. This versatile unit can be clipped to your belt for one-handed portable operation. The PacVac™ is constructed with ESD safe materials and comes complete with the following features: A belt clip on the housing. Four feet of straight vacuum hose, #VSH-1/16-4. Four feet of coiled vacuum hose, #VCH-1/16-4. A set of seven vacuum tips, #VCS-7-B. A vacuum pick-up handle, #V3020-RF. ESD SAFE A 9-volt disposable alkaline battery. Compact design measures 108mm x 61mm x 22.1mm (approx. 4 1/4" x 2 3/8" x 7/8"). Lightweight—only 156 grams. Runs up to eight hours continuously on one 9-volt alkaline battery. Produces vacuum of over ten inches of mercury. Order Number: V3200 1–9 Pricing: $149.50 10-24 $142.03 Practical HP-300™ Vacuum Handling Tool For Large Components ESD SAFE High-power vacuum tool designed for large components. Perfect for MCM modules and other heavy components. ESD Safe. Easily handles up to 500 grams with the 3/4" (19mm) vacuum cup. No vacuum hoses or power cords to get in your way. Totally self-contained. Fits in your pocket like a pen. No batteries to replace. Vacuum-cup rubber is ESD safe. Perfect for handling large surface mount components. Vacuum-cups push on to a barbed fitting that holds them tight. Vacuum-cup diameters are 1/2" (12.7mm), 5/8" (15.8mm) and 3/4" (19mm). Made in the U.S.A. Order Number: HP-300 1–10 Pricing: $49.50 12.7mm (1/2") 120mm (4 3/4") 11–25 $48.00 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 51 Tools And Tool Kits Weller® Soldering Gun Kit (140/100 Watts) (260/200 Watts) 8-piece kit with 8200 soldering gun Includes: one soldering tip; one sealing tip; one cutting tip; flux brush; soldering aid tool; coil of lead-free rosin core solder Sturdy plastic carrying case Soldering hints booklet UL listed 8-piece heavy duty kit with D550 soldering gun Includes: one soldering tip; one sealing tip; one cutting tip; flux brush; soldering aid tool; coil of lead-free rosin core solder Sturdy plastic carrying case Soldering hints booklet UL listed Order Number: 8200PK ..................... $40.00 Order Number: D550PK .................... $43.00 Weller® Circuit Board Vise ESD SAFE Complete work center for placing, soldering and desoldering printed circuit boards Spring clamps hold workpiece in place Rotates through 360º, allowing work performance at any convenient angle Adjustable features allow handling of a variety of circuit board sizes Socket key included Maximum surface: 6-1/4" x 9-1/8" (160mm x 235 mm) ESD safe Order Number: ESF120ESD .............. $90.00 Weller® Self-Contained 2-Person Fume Extractor Efficient 4-stage, replaceable filter system removes 99.995% of contaminants up to 3 microns No external air source required Silent-running, maintenance-free rotary pump Compact size makes it convenient to use anywhere For use with FE Series soldering irons Fully portable 120v Order Number: WFE2P .................... $625.00 Xcelite® Pliers Kit—Electronics Handy Pack Assortment A compact kit designed for the sophisticated electronics technician or dedicated hobbyist Consists of the six most popular Copaloy electronics pliers Durable pocket-pouch with heavy-duty snaps Each professional quality tool features the unique Copaloy rivet for smoother action Kit Includes: ● EC54J 4-1/2" Transverse end cutting pliers ● MS54 4" Diagonal cutting pliers ● SN54 5" Long nose pliers with side cutter ● NN54 5" Fine tip needle nose pliers ● DN54G 5" Flat nose pliers ● LN54 5" Long nose pliers ● Pocket pouch with snaps Order Number: C1K ........................... $89.95 52 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Tools And Tool Kits Xcelite® Attaché Tool Cases For Technicians, Servicemen, And Field Engineers Choice of sturdy, spacious and attractive attaché style tool cases Aluminum tool case plus flexible soft-sided case to meet virtually every need Each contains an ideal assortment and arrangement of top quality Xcelite® professional hand tools Tools neatly mounted in pockets, plus generous space for individualized selection of test instruments, parts boxes, Weller® soldering iron, Xcelite® measuring tapes and other tools Roomy file pocket in lid for service manuals, circuitry diagrams and literature Largest, most elaborate of tool cases. Contains 53 individual hand tools, 31 Series 99® interchangeable screwdriver/nutdriver blades and handles, and two specialized screwdriver/nutdriver kits Covered with attractive durable charcoal brown leather-grain Marvelon vinyl Removable 3-panel hinged tool pallet in lid, plus additional pallet in bottom Solid brass hardware with anodized aluminum divider in bottom Size: 18-3/4" x 12-1/2" x 5-7/8" (476mm x 318mm x 149mm) Order Number: TC100ST (Tool Case With Tools) ..................................................... $710.50 TC100MT (Tool Case Only—No Tools) ............................................ $225.45 A carefully selected, intermediate assortment of Xcelite® hand tools. Contains 23 individual hand tools, popular WP25 Weller® 25 watt soldering iron, 24 Series 99® interchangeable screwdriver/ nutdriver blades and handles, XL70 offset ratchet screwdriver set, measuring tape and solder Covered with attractive durable tan leather grain Marvelon vinyl Removable tool pallet in lid and bottom Solid brass hardware and padded handle with anodized aluminum divider in bottom Size: 18" x 12-5/8" x 4-1/4" (457mm x 321mm x 108mm) Order Number: TC150ST (Tool Case With Tools) ..................................................... $610.50 TC150MT (Tool Case Only—No Tools) ............................................ $199.00 A fine blending of quality, economy and flexibility. Contains 10 individual hand tools and 27 Series 99® interchangeable screwdriver/nutdriver blades and handles Case made from rugged Cordura® and features a heavy-duty zipper and soft leather-wrapped handles Contains (on outside) one pocket on one side and two smaller pockets on opposite side Size: 13-1/2" x 10-1/2" x 2-3/8" (343mm x 267mm x 60mm) Order Number: TCS200ST (Tool Case With Tools) ................................................... $325.25 TCS200MT (Tool Case Only—No Tools) ............................................ $87.95 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 53 Tools And Tool Kits Xcelite® Multi-Purpose Tool Kit 11 quality tools perfect for all types of routine repair work and simple D.I.Y. projects Packed in an attractive easy-to-store case Order Number: TKX11 ....................... $71.95 Xcelite® Offset Ratchet Screwdriver Set 19-piece midget, offset, reversible ratchet set All-purpose driver bits 1/4" (6mm) hex shank Simple and easy-to-use for assembly, disassembly, adjustment and repair work involving Allen hex, Phillips and slotted screws Order Number: XL70 ......................... $53.95 Xcelite® Personal Computer Repair Kit Ideal for repairs on PCs Contains 12 anti-static chip tools, protects chips from ESD damage Tools fit securely in a convenient roll-up pouch Order Number: 99SPC-PC ................. $36.95 Eram Mutli-Purpose Assembly Kit Order Number: 3000 KC .................. $315.00 Eram Anti-Static 5-Tweezer and Micro-Cutter Kit Order Number: 3900 KC .................. $215.00 54 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Tech Spray 1600 Cleaners/Degreasers, Defluxers, Dusters, Freeze Spray Label & Adhesive Remover Features Benefits Pre-Saturated Wipe Quick, Efficient Cleaner IPA and DI Water Blend Controlled Evaporation Non-Aggressive Safe on Most Plastics Lint-Free Wipe Particle Free Cleaning Isopropyl Alcohol SMT Stencil Wipes This pre-saturated wipe is excellent for removing inks, pastes and contaminants that usually arise in most SMT processes. Applications Screens • Stencils • Squeegees • Ceramic and Epoxy Substrates Order Number: 1608-DSP (48 Pre-Saturated Wipes in Pop-Up Container) .................... $9.68 Features Benefits 99% Pure Anhydrous Alcohol Water Free to Prevent Corrosion Rapid Evaporation More Productive Cleaning Agent Non-Aggressive Safe on Most Plastics General Purpose Cleaner Dissolves a Majority of the Soils Found in the Electronics Workplace Order Numbers: 1610-P (1 Pint in Plastic) ...................................................................... $6.82 1610-G (1 Pint in Metal) .................................................................... $32.40 1610-DSP (48 Pre-Saturated Wipes in Pop-up Container) ................. $10.75 Features Benefits Mild Cleaner Safe on Most Plastics High Flash Point (43°C/111°F) Reduces Risk of Flammability Low Toxicity Safer Solvent Natural Solvent Non-Ozone Depleting Penetrates Rapidly Efficient Cleaning Pleasant Odor Easy to Use Order Numbers: 1613-6S (6 Ounce Aerosol) .................................................................. $7.93 1613-6SC (12 Cans Per Case) .......................................................... $85.64 Isopropyl Alcohol 99% pure, anhydrous isopropanol for general purpose cleaning. Excellent for tape head cleaning, removal of fluxes, light oils, polar soils and white mineral residue. Can be used as a thinner for most fluxes. Applications Tape Head Cleaning • Printed Circuit Boards • Connectors • Microwave and Telephone Circuitry • Data Processing Equipment • Medical Equipment • Relays • Flux Thinner • Fiber Optics Label & Adhesive Remover Label & Adhesive Remover is a specially designed, hydrocarbon cleaner that safely removes labels and adhesive gums from equipment and products. Effectively removes gummy residues, labels, stickers, ink-marks, beverage spills, and other contaminates. Solvent has a pleasant odor. Applications Labels • Adhesives • Office Equipment • Telephones • Printers • Copiers • Video Games • CRT Screens • Terminals • Plastic Cases Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 55 1600 Tech Spray Cleaners/Degreasers, Defluxers, Dusters, Freeze Spray Ecoline Flux Remover Ecoline Contact Cleaner Ecoline Flux Remover The Flux Remover is a unique combination of hydrocarbon solvents and alcohols making it a excellent defluxer. Safe on plastics and rapidly evaporating, the Flux Remover dissolves type R, RMA, SA and most no-clean fluxes. Can also be used as an allpurpose cleaner for removal of light oils, silicones, waxes, greases and similar contaminants. Applications Envi-Ro-Tech Duster Features Benefits Contains THF Excellent Defluxing Power Non-Ozone Depleting Replaces CFCs and HCFCs Non-Corrosive Will Not Harm Metals Rapid Evaporation Efficient Cleaning Safe on Plastics Can Be Used in a Wide Variety of Applications Printed Circuit Boards • Gold Fingers • Connectors • Microwave and Telephone Circuitry • Avionics • Relays • Switches Order Numbers: 1621-10S (10 Ounce Aerosol) .............................................................. $8.62 1621-10SC (12 Cans Per Case) ........................................................ $93.00 Ecoline Contact Cleaner Features Benefits Hexane Mixture Excellent Contact Cleaner Quickly Penetrates Efficient Cleaner Mild Cleaner Safe on Most Plastics Non-Corrosive Will Not Harm Metals General Purpose Cleaner The Contact Cleaner is a hexane mixture that cleans electrical contacts and connections. Ideal for switches, relays, contact pads and other electrical connections. Safe on most plastics, the solvents will not damage switch housings. Applications Contacts and Controls • PCBs • Motors• Generators • Switches • Industrial Machinery • Gears • Electromechanical Devices Order Numbers: 1622-10S (10 Ounce Aerosol) .............................................................. $8.09 1622-10SC (12 Cans Per Case) ........................................................ $92.00 Envi-Ro-Tech™ Duster Features Benefits 100% HFC-134a Zero Ozone Depletion Potential Non-Flammable No Risk of Combustion Leaves No Residue Contaminant Free Moisture-Free Non-Corrosive Non-Abrasive Safe on Most Plastics Oderless No Irritating Smell Formulated with HFC-134a, this exceptionally pure, moisture-free, inert gas removes particles without the use of harmful solvents. Because HFCs do not harm the ozone, this product has a zero ozone depletion factor. This product removes microscopic contaminants, lint, dust, metallic oxide deposits and other soils. Applications Electronic Equipment • Computers • Printers• Optical Cleaning • Photographic • Industrial• Film Negatives • Data Processing Equipment• Laboratory Apparatus • Magnetic Tape Heads 56 Order Numbers: 1671-10S (10 Ounce Aerosol) .............................................................. $5.87 1671-10SC (12 Cans Per Case) ........................................................ $66.00 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Tech Spray 1600 Cleaners/Degreasers, Defluxers, Dusters, Freeze Spray SMT Stencil Cleaner Features Benefits 100% HFC-134a Zero Ozone Depletion Non-Flammable Less Risk of Combustion Chills to -62°F Quickly Detects Faults Leaves No Residue Will Not Contaminate Substrate Moisture-Free Develops Frost Envi-Ro-Tech™ Freezer An HFC134a based, rapidly evaporating liquid that can chill to minus 62°F. Because HFCs do not harm the ozone, this product has a zero depletion factor. Used as a troubleshooting aid for intermittently faulting capacitors, resistors, semiconductors and other defective components. It also detects cold solder joints, cracks in printed circuit boards and oxidized junctions. Order Numbers: 1672-10S (10 Ounce Aerosol) .............................................................. $6.30 1672-10SC (12 Cans Per Case) ........................................................ $71.60 Applications Features Benefits General Purpose Defluxer Excellent Solvent for Moderately Polar Soils Envi-Ro-Tech™ 1676 Non-Flammable Less Risk of Combustion Pure Solvent Zero Residue Penetrates Rapidly Quickly Dissolves Soils Blended HCFC Removes Ionic Contamination Locator of Faulty Components • Prevents Cold Solder Joints • Protects Heat Sensitive Components General Purpose Defluxer General Purpose azeotropic defluxer for R, RA, RMA and SA type fluxes. Can be used as an all-purpose cleaner to remove light oils, silicones, waxes, greases, and similar contaminants often found in electronics manufacturing. Applications Order Numbers: 1676-12S (12 Ounce Aerosol) .............................................................. $9.24 1676-12SC (12 Cans Per Case) ........................................................ $99.80 Printed Circuit Boards • Gold Fingers • Connectors • Microwave and Telephone Circuitry • Avionics • Relays • Switches • Other Electronic Assemblies Features SMT Stencil Cleaner Benefits Hydrocarbon Based Cleaner Non-Ozone Depleting High Flash Point (43°C/111°F) Reduces Risk of Flammability Excellent Cleaner Removes Solder Pastes Non-Corrosive Will Not Attack Metal Surfaces Completely Evaporates Efficient Cleaner Hydrocarbon-based, non-ozone depleting stencil cleaner effectively removes solder paste from screens, misprinted boards and equipment. Its proprietary blend works on most wet or dried thick film and solder paste compositions. Ideal for hand cleaning application equipment and misprinted substrates. Applications Order Number: 1693-DSP (48 Pre-Saturated Wipes in Pop-Up Container) ................. $13.42 Cleaning Screen Emulsions • Stencils • Ceramic and Epoxy Substrates • Most Electronic Components • Application Accessories such as Squeegees, Spatulas and Mixers Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 57 1700 Tech Spray Static Control Zero Charge Anti-Stat (Gal.) Zero Charge Mat & Table Top Cleaner Zero Charge® Anti-Stat A fast drying, anti-static coating that eliminates static charge and reduces triboelectric generation from most surfaces. Recommended for applications that experience flexing and movement and for plastics such as polyethylene, polypropylene and polyphenylene oxide (Noryl™). Applications Computer Cabinets • Printer Covers • Office Equipment • Carpets • Drapes • Flexible Mats • Walls • Table Tops• Work Stations • Cloth • Any Application Requiring Static Protection Features Benefits All-Purpose Anti-Stat Can Be Applied to Most Surfaces Controls Static Eliminates Static Charge Topical Coating Reduces Triboelectric Generation Fast Drying Instant Charge Dissipation Non-Flammable Less Risk of Combustion Easy Application One Step Order Numbers: 1726-PT (1 Pint with Trigger in Plastic) ................................................ $9.04 1726-PTC (12 Cans Per Case) .......................................................... $97.64 Zero Charge® Mat and Table Top Cleaner Features Benefits A neutral pH cleaner for general use in production areas that removes insulating contaminants such as flux residues, oils, greases, nicotine, dirt and grime. The Mat & Table Top Cleaner eliminates charge while leaving an anti-static agent that helps prevent static charge build-up. Dual Purpose Cleans and Provides Static Protection Leaves No Insulating Film Protects Your ESD Environment Non-Abrasive Will Not Scratch Substrate Non-Corrosive Safe on Plastics Non-Flammable Less Risk of Combustion Applications Contains No Ammonia Use on Any Surface Conductive Mats • Table Tops • Cleanrooms • Computer Stations • Soldering Stations • Office Equipment • Telecommunications • Conductive Floor Mats • Electronic Instrumentation Order Numbers: 1733-PT (1 Pint with Trigger in Plastic) ................................................ $7.93 1733-PTC (12 Cans Per Case) .......................................................... $85.64 58 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Tech Spray 1800 Desoldering Braid Protective Vacuum Packaging No-Clean Wick Tips For Selecting The Right Wick Important Considerations Suggestions Cautions Use a wick equal in diameter to pad and tip size. Use a slightly larger diameter wick if cut at an angle. Use a smaller diameter wick if folded. If the wick size is too large, it will restrict heat transfers to the connection and result in reduced wicking action. If the wick size is too narrow, it will require numerous applications to effectively desolder joint, subjecting the component and pad to unnecessary prolonged heat. Amount of solder involved Size of pad or connection Desired speed of operation Operating temperature Specifications Meets or Exceeds MIL-F-142560D, Type R; NASA NHB 5300.4 (34-1); NASA NPC 200-4; NASA SP5002.1821: HP 8690-0576; 1822: HP 8690-0588; 1823: HP 8690-0577. All dimensions are approximate. All products shipped in vacuum packaging. Pro Wick Anti-Static Bobbin Size/Color #2/Yellow #3/Green Product 1809 1810 #4/Blue 1811 Width .060" (1.5mm) .85" (2.0mm) .100" (2.5mm) Availability 5F, 10F 5F, 10F 5F, 10F No-Clean Wick Anti-Static Bobbin Size/Color #2/Yellow #3/Green #4/Blue Product 1821 1822 1823 Width .60" (1.5mm) .85" (2.0mm) .100" (2.5mm) Availability 5F, 10F 5F, 10F 5F, 10F Order Numbers: 1809-5F ..................................................... $1.70 1810-5F ..................................................... $1.84 1811-5F ..................................................... $2.03 1821-5F ..................................................... $2.11 1822-5F ..................................................... $2.25 1823-5F ..................................................... $2.48 Wick (Actual Size) #1 White #2 Yellow #3 Green #4 Blue #5 Brown #6 Red Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 59 1900 Tech Spray Equipment and Specialty Products TechPump Bottles: 1980, 1982, 1981 TechPump Bottles TechPump Bottles are designed for precision control and dispensing of solvents in electronic and laboratory environments. The distinctive pumping mechanism combined with a high density polyethylene (HDPE) bottle makes a complete unit, ready for use with a broad range of cleaning solvents. The dish-type pump dispenser allows for a clean, one-handed operation, which prevents the use of excessive solvent, and keeps contaminants from entering the container. Applications The pump includes a hinged lid to keep out impurities while the container is not in use, and stainless steel parts to facilitate the use of aggressive solvents. Precision valve seals contents to reduce vapor and product loss. To insure total purity, the unit is shipped with a cellon band sealing the pump head. Order Numbers: 1980 (4 Ounce Bottle with Pump) ....................................................... $11.77 1981 (6 Ounce Bottle with Pump) ....................................................... $11.94 1982 (8 Ounce Bottle with Pump) ....................................................... $12.10 1983 (6 Ounce Conductive Bottle with Pump) .................................... $15.27 For use with all Tech Spray cleaners, degreasers and defluxers • Isopropanol • Ethanol• Mixed Alcohols • Terpenes •Water Based Solvents 2300 Tech Spray TechSwabs™ Swab tips are manufactured with a variety of quality materials to suit different tasks. Most are heat sealed onto handles to avoid the contaminating residues of adhesives. Handles are fashioned from a selection of natural and man-made materials chosen for their flexibility and durability. TechSwabs™ are packaged in a Class 100 cleanroom in static dissipative resealable bags that control both electrostatic discharge and contamination. TechSwabs™ are ideal for cleanroom use. Tip Width Attachment of Tip Handle Length Handle Material Anti-Static Handle Pliable Handle 60 2302 2300 7/16" Heat Sealed 6" Polypropylene Yes Yes 3/16" Wrapped 6" Wood Neutral — Order Numbers: 2302-10 (10 Pack Bag) ........................................................................ $3.15 2302-50 (50 Pack Bag) ........................................................................ $9.87 2302-1000 (1000 Pack Bag) ........................................................... $123.97 2300-100 (100 Pack Bag) .................................................................... $2.83 2300-1000 (1000 Pack Bag) ............................................................. $21.52 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Tech Spray 2300 Wipes TechClean SMT Wipe TechClean® Wiper Specifications Exceeds U.S. Air Force requirements for surface contamination, HP 9300-1618. Specifically designed for cleanroom maintenance, this hydroentangled cellulose/polyester wipe has high absorbency with extra low particulate and chemical extractables. Applications Order Number: 2350-100 (100 9x9 Inch “C”-Fold Wipes Packaged Bag ‘n’ Bag™) .... $14.57 Cleanroom Maintenance • Solvent and Aqueous Absorbent • Dislodgment of Heavy Soils • Static Free Environments TechClean® SMT Wipe Specifically designed for cleaning surface mount stencils and screening equipment. TechClean® SMT Wipe’s cellular based foam structure traps particulates and liquids for a thorough job. This wipe is manufactured with polyurethane materials, using a fiberfree configuration that will not leave wipe particulates behind. Use with Tech Spray’s SMT Stencil Cleaner (1693) for effective results. Applications Order Number: 2358-50 (100 6x6 Inch Wipes) .......................................................... $47.50 Cleaning SMT Stencils • Screens • Squeegees • Mounts • Misprinted Boards and Components TechClean® SMT Blue Wipes Specifically designed for maintenance, this blue hydroentangled cellulose/polyester wipe has high absorbency with extra low particulate and chemical extractables. This wipe has the same composition as the TechClean® Wiper (2350). Applications Order Number: 2359-300 (300 9x9 Inch Flat Wipes Packaged Bag ‘n’ Bag™) ............ $23.47 Cleanroom Maintenance • Solvent and Aqueous Absorbent • Dislodgement of heavy Soils • Static Free Environments Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com 61 Glossary Alloy = A combination of two or more elements whereby at least one of them is a metal. PLCC = Plastic leaded chip carrier Array = A group of elements arranged in rows and columns. SMD = Surface mount device BGA = Ball grid array SMOBC = Solder mask over bare copper BQFP = Bumpered quad flat pack Castellation = A leadless termination used on LCC packages for connection to the printed circuit board. Coplanarity = Related to surface mount, how flat the leads are referenced to the seating plane. CQFP = Ceramic quad flat pack CSBGA = Chip scale BGA CSP = Chip scale package DRAM = Dynamic random access memory Dummy Component = A mechanical package, typically without the silicon die. Used to verify the manufacturing process inexpensively. QFP = Quad flat pack SMT = Surface mount technology SMTA = Surface Mount Technology Association SOIC = Small outline integrated circuit SOJ = Small outline “J” leads Solder = A readily meltable alloy of tin and lead used to bond component connections. SOP = Small outline package SSOP = Small shrink outline package SOT = Small outline transistor TAB = Tape automated bonding using tape for leads rather than bonded gold wire. FC = Flip chip TQFP = Thin quad flat pack HASL = Hot air solder leveling TSOP = Thin small outline package Heatsink = A device that absorbs and drains off heat from hot objects, re-radiating it into the surrounding environment. TSSOP = Thin, Shrink Small Outline Package JEDEC = Joint Electronic Device Engineering Council MCMBGA = Multichip module BGA MQFP = Metric quad flat pack LCC = Leadless chip carrier LPI = Liquid photo imageable OHM = The unit of resistance PCMCIA = Personal Computer Memory Card International Association PQFP = Plastic quad flat pack 62 Practical Components • Phone 1-714-899-8309 • Fax 1-714-899-8599 • [email protected] • www.practicalcomponents.com Practical Components, Inc. 15211 Springdale Street Huntington Beach, CA 92649 Phone: 1-714-899-8309 Fax: 1-714-899-8599 Email: [email protected] www.practicalcomponents.com PRACTICAL COMPONENTS Fax Quote Form Name ________________________________________________ Phone ____________________________ Ext _______________ Title _________________________________________________ Fax __________________________________________________ Company _____________________________________________ Email ________________________________________________ Address ______________________________________________ _____________________________________________________ Credit Card □ Visa □ MasterCard □ American Express City __________________________________________________ Card# _______________________________________________ State _______________________________ ZIP ______________ Exp. Date ____/____ Country ______________________________________________ Signature _____________________________________________ Delivery Due Date____________________ □ For Purchase Within 30 Days □ For Bid Only Part Number Package Type Quantity Target Price ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ ____________________________________________________________________________________________________ Comments ____________________________________________________________________________________________________ ______________________________________________________________________________________________________________ ______________________________________________________________________________________________________________ ______________________________________________________________________________________________________________