Technologie 3. rocnik_Vyukovy material
Transkript
Technologie 3. rocnik_Vyukovy material
Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Název výstupu: Výukový materiál Účel: Výuka metodou CLIL Předmět: Technologie Cílová skupina: 3. ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Autor: Ing. Alexander Ratimorský Seznam témat 1. Internal Structure of Metals ...................................................................... 6 2. Crystal Lattice, Alloys .............................................................................. 11 3. Imperfections of real crystal lattice – lattice defects ............................... 16 4. Metallography - Alloys, Crystallization .................................................... 21 5. Types of Structure ................................................................................... 26 6. Metallographic Test of Materials ............................................................ 30 7. Basic Terms of Physical Chemistry .......................................................... 35 8. One Component System (Homogeneous) ............................................... 40 9. Two-Component System ......................................................................... 45 10. Phase Rule .............................................................................................. 50 11. Metals and Their Alloys ........................................................................... 55 12. Cooling and Heating of Pure Metal ......................................................... 61 13. Crystallization of Pure Metal ................................................................... 66 14. Iron Polymorphism.................................................................................. 70 15. Equilibrium Diagram of Binary Alloy ........................................................ 75 16. Binary Alloys - Two Metals Completely Soluble....................................... 80 17. Binary Alloys - Two Metals Insoluble in Solid State ................................. 85 18. Two Metals with Solubility Change in Solid State .................................... 90 19. Equilibrium Diagram Fe-C........................................................................ 95 20. The Iron-Graphite System ..................................................................... 100 21. Effect of Alloying Elements on the diagram Fe – Fe3C .......................... 105 22. Metastable System Fe – Fe3C ............................................................... 110 23. Heat Treatment of Metals ..................................................................... 115 24. Structure of Steel in Slow Heating ......................................................... 119 25. Review of Heat Treatment Methods ..................................................... 124 26. Austenite Disintegration Diagrams........................................................ 129 27. Annealing .............................................................................................. 133 28. Quenching............................................................................................. 137 29. Thermochemical Treatment .................................................................. 141 30. Fields of Annealing Temperature .......................................................... 145 31. Heat Treatment of Tool Steel ................................................................ 150 32. Process of Cementation ........................................................................ 154 33. Hardening - Surface Hardening ............................................................. 159 34. Forming Theory – Basic Terms .............................................................. 164 35. Theory of Forming - Basic Principles and Variables ............................... 169 36. Theory of Forming - Influence of Temperature on Plastic Deformation 173 37. Theory of Forming - Heating of Material, Heating Furnaces .................. 178 38. Forming Technology - Classification ...................................................... 183 39. Forming Technology – Metal Rolling ..................................................... 188 40. Rolled Half-finished Products ................................................................ 193 41. Forming Technology – Drawing ............................................................. 198 42. Drawn Half-finished Products ............................................................... 203 43. Rolled Half-finished Products ................................................................ 207 44. Forming Technology – Hammer Forging ............................................... 212 45. Forming Technology – Die Forging ........................................................ 219 46. Forging Machines .................................................................................. 224 47. Special Methods of Hot Forming ........................................................... 230 48. Cold Forming Technology – Cutting ...................................................... 235 49. Bending ................................................................................................. 241 50. Bending - Calculation ............................................................................ 247 51. Cold Forming Technology – Tube Bending ............................................ 251 52. Drawing................................................................................................. 257 53. Extrusion ............................................................................................... 261 54. Casting - Principles and Methods .......................................................... 266 55. Permanent Mould Casting .................................................................... 272 56. Patterns and Moulding Materials .......................................................... 278 57. Permanent Pattern Moulding ............................................................... 284 58. Casting Defects ..................................................................................... 289 59. Cleaning and Finishing of Castings ........................................................ 295 60. Vacuum and Shell Moulding, Centrifugal Casting .................................. 299 61. Moulding with Expendable Patterns ..................................................... 304 62. Permanent-Mould Casting .................................................................... 308 63. Casting Materials .................................................................................. 313 64. Technological Principles in Casting Design ............................................ 319 Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Metallography - Internal Structure of Metals and Alloys Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s vnitřní strukturou kovů. jazykový – Vocabulary, reading Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 01 YEAR: 3 Metallography - Internal Structure of Metals and Alloys 1. SUBJECT: Technology Internal Structure of Metals To the naked eye a metal surface looks monolithic without noticeable structure. In 10000xs magnification by electron microscope there is very ragged microstructure. Regular division of the tight-fitting polyhedrons can be recognized. These polyhedrons are called elementary cells or crystals. When you zoom in 10 million, it can be recognized ions forming periodic structure of metal. The centres of the atoms and their imaginary lines create the crystal lattice. Exercise 1 Write English words to the Czech terms below. Try to find them in the article above. 1. krystalová mřížka _________________________ 2. ionty kovu _________________________ 3. elementární buňka _________________________ 4. elektronový mikroskop _________________________ 5. povrch kovu _________________________ 6. zvětšení _________________________ Exercise 2 questions. Watch the video below and answer these 1. What is the gear made from? 2. What protects the gear from corrosion? 3. What elements are added to increase steel’s resistance? Watch the video: Exploring the atomic composition of steel https://www.youtube.com/watch?v=fz5gzQJq-0s (3.32) Key 1 1 crystal lattice, 2 ions of metal, 3 elementary cells, 4 electron microscope, 5 metal surface, 6 magnification 2 1 Convectional steel, 2 Small quantity of carbon, 3 Nickel, manganese, chrome. Dictionary English Pronunciation Czech alloy /ˈalɔɪ/ slitina atom /ˈatəm/ atom combine /kəmˈbʌɪn/ slučovat crystal lattice / ˈkrɪst(ə)l ˈlatɪs/ krystalická mřížka crystalline structure / ˈkrɪst(ə)lʌɪn ˈstrʌktʃə/ krystalická struktura electron microscope / ɪˈlɛktrɒn ˈmʌɪkrəskəʊp/ elektronový mikroskop free electron / friː ɪˈlɛktrɒn / volný elektron internal structure /ɪnˈtəːn(ə)l ˈstrʌktʃə/ vnitřní stuktura ion / ˈʌɪən/ iont magnification / ˌmagnɪfɪˈkeɪʃ(ə)n/ zvětšení metal / ˈmɛt(ə)l/ kov metallic bonding /mɪˈtalɪk bɒndɪŋ/ kovová vazba metallography /ˌmɛtəˈlɒɡrəfi/ metalografie microstructure /ˈmʌɪkrə(ʊ)ˌstrʌktʃə/ mikrostruktura molecule /ˈmɒlɪkjuːl/ molekula structure /ˈstrʌktʃə/ struktura unit cell / ˈjuːnɪt sɛl/ elementární buňka Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Crystal Lattice, Alloys Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s druhy krystalických mřížek. jazykový – Developing reading skills Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 02 YEAR: 3 Crystal Lattice, Alloys 2. SUBJECT: Technology Crystal Lattice, Alloys Exercise 1 Read the text below and match the title a-b to the correct paragraph 1-3. a) Hexagonal lattice b) Body-centred lattice c) Face-centred lattice ATOM protons, neutrons – in the core electrons – in the atomic shell in layers Individual atoms are combined into the molecules where they are bonded to each other by a chemical bond. CRYSTAL LATTICE All metals (except mercury) are crystalline substances at normal temperature. The arrangement of atoms (molecules) in substance is given by crystal lattice. 1___________________________ The basic shape is a cube where the atoms are in corners and one in the centre. 13 metals crystallize in this lattice. They are usually little cold-formed (for example iron α and δ, Cr, W, etc.). 2___________________________ It has closer arrangement of atoms than body-centred lattice. There crystallize metals very cold-formed like Ca α, Fe γ, Ni, Ag, Au, Pb. 3___________________________ It has a shape of hexagonal prism. There crystallize for example Zn, Mg. Key 1 1 b, 2 c, 3 a Dictionary English Pronunciation Czech alloy /ˈalɔɪ/ slitina arrangement /əˈreɪn(d)ʒm(ə)nt/ uspořádání atom /ˈatəm/ atom cube /ˈkjub/ krychle cubic /ˈkjuːbɪk/ krychlový body-centred cubic lattice face-centred cubic lattice (BCC) (FCC) /ˈbɒdi ´sɛntəd ˈkjuːbɪk ˈlatɪs/ /feɪs ˈsɛntəd ˈkjuːbɪk ˈlatɪs/ mřížka krychlová prostorově středěná mřížka krychlová plošně středěná hexagonal lattice /ˈhɛksəg(ə)nəl ˈlatɪs/ mřížka šesterečná crystal lattice /ˈkrɪst(ə)l ˈlatɪs/ krystalová mřížka crystallize /ˈkrɪst(ə)lʌɪz/ krystalizovat chemical bond /ˈkɛmɪk(ə)l ˈbɒnd/ chemická vazba combine /kəmˈbʌɪn/ slučovat se internal /ɪnˈtəːn(ə)l/ vnitřní formability /fɔːmə´bɪlɪtɪ/ tvárnost cold formability /kəʊld fɔːmə´bɪlɪtɪ/ tvárnost za studena molecule /ˈmɒlɪkjuːl/ molekula electron /ɪˈlɛktrɒn/ elektron neutron /ˈnjuːtrɒn/ neutron nucleus /ˈnjuːklɪəs/ jádro atomu proton /ˈprəʊtɒn/ proton prism /ˈprɪz(ə)m/ hranol metal /ˈmɛt(ə)l/ kov substance /ˈsʌbst(ə)ns/ látka Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Imperfections of Crystal Lattice Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s poruchami a nedokonalostmi krystalických mřížek. jazykový – Word order, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 03 YEAR: 3 SUBJECT: Imperfections of Crystal Lattice Technology 3. Imperfections of real crystal lattice – lattice defects Exercise 1 Rearrange the words to make sentences 1-5 then read the text. number Metal usually materials of consist crystals greater of 1 ______________________________________________________. a The of such called structure polycrystalline substance is 2 ______________________________________________________. In the crystallization crystals do not form perfect shape, but irregular crystals – grain. differ grains primarily of in spatial Individual direction lattices diverse 3 ______________________________________________________. are in lattice crystal Irregularities defects the lattice called 4 ______________________________________________________. lattice of properties explains some of metals The defects existence 5 ______________________________________________________. For example changes in electrical and magnetic properties, lower real strength, brittleness... Exercise 2 Write Czech terms to the following English phrases 1-4. Defects: Point defects - some places in a crystal lattice are occupied by foreign atoms, in some places the atom is missing (vacancy). 1. Missing atoms __________________________________________________ 2. Small atom substituting for metal ion __________________________________________________ 3. Small additional atom __________________________________________________ 4. Large atom substituting for metal ion __________________________________________________ Line defects dislocation. redundant layer of atoms occurs in the lattice – Key 1 1 Metal materials usually consist of greater number of crystals. 2 The structure of such a substance is called polycrystalline. 3 Individual grains differ primarily in diverse direction of spatial lattices. 4 Irregularities in the crystal lattice are called lattice defects. 5 The existence of lattice defects explains some properties of metals. 2 1 Chybějící atomy, 2 malý atom nahrazuje iont kovu, 3 malý dodatečný atom, 4 velký atom nahrazuje iont kovu Dictionary English Pronunciation Czech crystal /ˈkrɪst(ə)l/ krystal crystal lattice /ˈkrɪst(ə)l ˈlatɪs/ krystalová mřížka crystallite /ˈkrɪst(ə)lʌɪt/ krystalit crystallization /ˈkrɪst(ə)lʌɪˈzeɪʃ(ə)n/ krystalizace defect /ˈdiːfɛkt/ porucha dislocation /ˌdɪslə(ʊ)ˈkeɪʃ(ə)n/ dislokace extra atom /ˈɛkstrə ˈatəm/ nadbytečný atom grain /greɪn/ zrno imperfection /ɪmpəˈfɛkʃ(ə)n/ nedokonalost irregular /ɪˈrɛɡjʊlə/ nepravidelný lattice defect /ˈlatɪs ˈdiːfɛkt/ mřížková porucha layer /ˈleɪə/ vrstva line defect /lʌɪn ˈdiːfɛkt/ čárová porucha metal /ˈmɛt(ə)l/ kov, kovový missing atom /ˈmɪsɪŋ ˈatəm/ chybějící atom node /nəʊd/ uzlový bod point defect /pɔɪnt ˈdiːfɛkt/ bodová porucha polycrystalline /ˌpɒlɪˈkrɪstəlʌɪn/ polykrystalický position /pəˈzɪʃ(ə)n/ pozice, poloha, umístění property /ˈprɒpəti/ vlastnost slip plane /slɪp pleɪn/ rovina kluzu structure /ˈstrʌktʃə/ struktura vacancy /ˈveɪk(ə)nsi/ vakance Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Metallography - Alloys, Crystallization Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se slitinami a krystalizací. jazykový – vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 04 YEAR: 3 Metallography - Alloys, Crystallization 4. SUBJECT: Technology Metallography - Alloys, Crystallization Methods of originating alloys 1. Coalescence of two or more melted metals. 2. Dissolving of small pieces of rigid additive metal or nonmetal in large amount. 3. Diffusion. Types of alloys according to composition binary alloy ternary alloy quaternary alloy complex alloy All alloys crystallize. Exercise 1 Complete the crossword below. Across Down 1. jemnozrnná 1. kov 2. vnitřní 2. struktura 3. čistý 3. velikost 4. hranice 4. zrno 5. hrubozrnná 6. ionty 7. slitina Key 1 Cross: 1 fine-grained, 2 internal, 3 pure, 4 boundary, Down: 1 metal, 2 structure, 3 size, 4 grain, 5 grained, 6 ions, 7 alloy Dictionary English Pronunciation Czech alloy /ˈalɔɪ/ slitina alloying metal /ˈalɔɪŋ ˈmɛt(ə)l/ legující kov binary alloy /ˈbʌɪnəri ˈalɔɪ / podvojná slitina, binární slitina coarse-grained /kɔːs ɡreɪnd/ hrubozrnný complex alloy /ˈkɒmplɛks ˈalɔɪ/ komplexní sliltina crystallization /ˈkrɪst(ə)lʌɪˈzeɪʃ(ə)n/ krystalizace diffusion /dɪˈfjuːʒ(ə)n/ difúze distribution /dɪstrɪˈbjuːʃ(ə)n/ rozmístění fine-grained /fʌɪn greɪnd/ jemnozrnný grain /greɪn/ zrno grain boundary /greɪn ˈbaʊnd(ə)ri/ hranice zrna metallographic specimen /mɪˌtaləˈɡrafɪk ˈspɛsɪmɪn/ metalografický výbrus non-metal /nɒn ˈmɛt(ə)l/ nekov quaternary alloy /kwəˈtəːn(ə)ri ˈalɔɪ / počtverná slitina, kvaternární slitina structure /ˈstrʌktʃə/ struktura ternary alloy /ˈtəːnəri ˈalɔɪ / potrojná slitina, ternární slitina Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Metallography - Types of Structure Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s druhy struktur. jazykový – Can, passives, word order Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 05 Metallography - Types of Structure 5. Exercise 1 the box. a) different SUBJECT: Technology Types of Structure Complete the text below with the words from b) of c) can d) a e) structure f) seen The structure 1__________ be 2___________ in thin section sample 3___________ the material by metallographic microscope. Individual grains of the 4____________ are from 1 to 100 microns large. Various 5____________ types of metals and crystal lattice form 6____________ typical grain shape. Example of grain (particle) shape: GLOBULAR – pure iron POLYHEDRAL – austenite DENDRITIC – martensite LAMELLAR STURCTURE – grey alloy The grain shape of the structure can be changed for example by rolling. Material with fine grain structure has a higher strength and better ductility than coarse material. Key 1 1 c, 2 f, 3 b, 4 e, 5 a, 6 d Dictionary English Pronunciation Czech alloy /ˈalɔɪ/ slitina coarse-grained structure /kɔːs ɡreɪnt strʌktʃə/ hrubozrnná struktura crystal lattice / ˈkrɪst(ə)l ˈlatɪs/ krystalická mřížka dendritic structure / dɛnˈdrɪtɪk ˈstrʌktʃə / dendritická struktura fine-grained structure /fʌɪn ɡreɪnt strʌktʃə/ jemnozrnná struktura globular structure / ˈglɒbjʊlə ˈstrʌktʃə / globulární struktura grain / greɪn/ zrno grain boundary / greɪn ˈbaʊnd(ə)ri/ hranice zrna grain shape /greɪn ʃeɪp/ tvar zrna lamellar structure / ləˈmɛlə strʌktʃə/ lamelární struktura metallographic /ˌmɛtəˈlɒgrəfik/ metalografický metallographic specimen /mɪˌtaləˈɡrafɪk ˈspɛsɪmɪn/ metalografický výbrus metallography /ˌmɛtəˈlɒɡrəfi/ metalografie microscope /ˈmʌɪkrəskəʊp/ mikroskop polyedric structure / ˌpɒlɪedrɪkˈstrʌktʃə/ polyedrická struktura pure /pjʊə/ čistý structure /ˈstrʌktʃə/ struktura Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Metallography - Materials Testing Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s metalografickou kontrolou materiálů. jazykový – Listening skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 6. WORKSHEET NO. 06 Metallography - Materials Testing SUBJECT: Technology Metallographic Test of Materials For your metallographic analysis you need quality equipment. If you have to perform mechanical tests, metallography have to be part of quality control samples of your metal. Samples of metals are sent to the laboratory and after metallographic HMA samples are cut with a cut-off machine with a disc adapted to avoid problems of surfaces. Then comes the passage to the polishing is done with polishing cloths of several grain sizes. A material structure is made visible for metallographic analysis. Exercise 1 Click on the link below to watch the video ‘CTP Metallography’ (2:06) and answer these questions. 1. What can be detected by metallography? 2. How many parts does this process have? 3. Why the chemical etching is used? https://www.youtube.com/watch?v=jFXzMB3rkn0 Exercise 2 Click on the link below to watch the video ‘Metallography Part I - Macroscopic Techniques’ (8:33) and answer these questions. 1. What kind of technique does this video show? 2. What material is the first investigated sample made of? 3. Why is it important to keep the material as cool as possible when cutting? 4. How does material tester protect herself when etching? 5. What are the crystals called in the technical terminology? https://www.youtube.com/watch?v=fc8zrgYJCJw Key 1 1 Internal defects of metal. 2 Three. 3 To attack the surface and reveal the microstructure. 2 1 Macroscopic. 2 Aluminium alloy. 3 To avoid changes in the material structure. 4 She wears a lab coat, special gloves and safety glasses. 5 Grains. Dictionary English Pronunciation Czech Baumann print /ˈbauman prɪnt/ Baumannův otisk electron microscope /ɪˈlɛktrɒn ˈmʌɪkrəskəʊp/ elektronový mikroskop fibrous /ˈfʌɪbrəs/ vláknitý fracture surface /ˈfraktʃə ˈsəːfɪs/ lomová plocha magnification /ˌmaɡnɪfɪˈkeɪʃ(ə)n/ zvětšení make visible /meɪk ˈvɪzɪb(ə)l/ zviditelnit material structure /məˈtɪərɪəl ˈstrʌktʃə/ struktura materiálu materials testing /məˈtɪərɪəls ˈtɛstɪŋ/ zkoušení materiálů metallographic analysis /mɪˌtaləˈɡrafɪk əˈnalɪsɪs/ metalografický rozbor metallographic control /mɪˌtaləˈɡrafɪk kənˈtrəʊl/ metalografická kontrola metallographic specimen /mɪˌtaləˈɡrafɪk ˈspɛsɪmɪn/ výbrus metallography /ˌmɛtəˈlɒɡrəfi/ metalografie micrograph /ˈmʌɪkrə(ʊ)ɡrɑːf/ mikroskopický snímek optical microscope /ˈɒptɪk(ə)l ˈmʌɪkrəskəʊp/ optický mikroskop structure /ˈstrʌktʃə/ struktura Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Basic Terms of Physical Chemistry Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se základními pojmy fyzikální chemie. jazykový – Reading, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 07 YEAR: 3 Basic Terms of Physical Chemistry 7. SUBJECT: Technology Basic Terms of Physical Chemistry All substances can occur in three different states. 1. Solid state – elementary particles (atoms, ions) are in close contact. 2. Liquid state – elementary particles are in permanent contact. 3. Gaseous state – elementary particles are dispersed in space and filled it evenly relatively sparsely. Substances in any state form a system. It can be: 1. homogeneous – consisting of one phase 2. heterogeneous – consisting of several phases Exercise 1 Answer the following questions 1-10. If you need any help, just click on the link below and find the answers in the text. http://study.com/academy/lesson/states-of-matter-solids-liquidsgases-plasma.html 1. What is the only substance that is found in all three states in the atmosphere? 2. In which state is a substance the most dense? (solid / liquid / gas) 3. Which state of matter has the atoms very close together? (solid / liquid / gas) 4. The boiling point is the temperature at which a substance changes from a liquid to a: (solid / liquid / gas) 5. Condensation is when a substance becomes a liquid from a: (solid / liquid / gas) 6. Ice is water in this form. (solid / liquid / gas) 7. Which state of matter can change its volume? (solid / liquid / gas) 8. Sublimation is the process of a solid changing to a: (solid / liquid / gas) 9. Steam is water in this form: (solid / liquid / gas) 10. Which state of matter can't change shape? (solid / liquid / gas) Key 1 1 water, 2 solid, 3 solid, 4 gas, 5 gas, 6 liquid, 7 gas, 8 gas, 9 gas, 10 solid Dictionary English Pronunciation Czech anisotropic /ˌanʌɪsə(ʊ)ˈtrɒpɪk/ anizotropní basic term /ˈbeɪsɪk təːm/ základní pojem diffusion /dɪˈfjuːʒ(ə)n/ difúze gas /ɡas/ plyn gaseous /ˈɡasɪəs/ plynný heterogeneous /ˌhɛt(ə)rə(ʊ)ˈdʒiːnɪəs/ nestejnorodý homogeneous /ˌhɒmə(ʊ)ˈdʒiːnɪəs/ stejnorodý isotropic /ˌʌɪsə(ʊ)ˈtrɒpɪk/ izotropní liquid /ˈlɪkwɪd/ kapalina particle /ˈpɑːtɪk(ə)l/ částice phase /feɪz/ fáze physical chemistry /ˈfɪzɪk(ə)l ˈkɛmɪstri/ fyzikální chemie position /pəˈzɪʃ(ə)n/ poloha property /ˈprɒpəti/ vlastnost solid /ˈsɒlɪd/ pevná látka state of matter /steɪt ɒv ˈmatə/ skupenství substance /ˈsʌbst(ə)ns/ látka system /ˈsɪstəm/ soustava volume /ˈvɒljuːm/ objem Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: One Component System (Homogeneous) Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se soustavou o jedné složce. jazykový – vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 08 YEAR: 3 One Component System (Homogeneous) 8. SUBJECT: Technology One Component System (Homogeneous) One component system (homogeneous, consisting of one phase) Example of homogeneous chemical substance is pure water. Steady state can be represented by planar diagram – water can exist in different state according to the temperature and the pressure (water – ice - vapour). Exercise 1 a) water Label the picture with the words from the box. b) T (°C) Obrázek 1 One component system 1 Vlastní dílo 1 c) p (Pa) d) water vapour e) ice Exercise 2 Explain this lines. 1. OC _________________________________________________ 2. OB _________________________________________________ 3. OA _________________________________________________ Key 1 1 T (°C), 2 water vapour, 3 ice, 4 water, 5 p (Pa) 2 1 coexistence of ice and water, 2 coexistence of ice and water vapour, 3 coexistence of water and water vapour Dictionary English Pronunciation Czech boiling point /ˈbɔɪlɪŋ pɔɪnt/ bod varu co-existent phases /ˌkəʊɪgˈzɪstənt ˈfeɪzɪz/ koexistující fáze component /kəmˈpəʊnənt/ složka constant /ˈkɒnst(ə)nt/ konstantní curve /kəːv/ křivka equilibrium state /ˌiːkwɪˈlɪbrɪəm ˈsteɪt / rovnovážný stav gaseous /ˈɡeɪsɪəs/ plynný homogeneous /ˌhɒmə(ʊ)ˈdʒiːnɪəs / homogenní ice /ʌɪs/ led liquid /ˈlɪkwɪd/ kapalný melting point /mɛltɪŋ pɔɪnt/ bod tání one-component system /wʌn kəmˈpəʊnənt ˈsɪstəm/ soustava o jedné složce phase diagram /ˈfeɪz ˈdʌɪəɡram/ fázový diagram pressure /ˈprɛʃə/ tlak solid /ˈsɒlɪd/ tuhý state of matter /steɪt ɒv ˈmatə/ skupenství substance /ˈsʌbst(ə)ns látka system /ˈsɪstəm/ soustava temperature /ˈtɛmp(ə)rətʃə/ teplota triple point /ˈtrɪp(ə)l pɔɪnt/ trojný bod vapour /ˈveɪpə/ pára water /ˈwɔːtə/ voda water vapour /ˈwɔːtə ˈveɪpə/ vodní pára Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Two-Component System Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se soustavou o dvou složkách. jazykový – Vocabulary, reading Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 09 YEAR: 3 Two-Component System 9. Exercise 1 questions. SUBJECT: Technology Two-Component System Read the text below and answer these 1. What should be done to create the two-component system? 2. What is a phase? If we add other chemicals into one component system, we can create a system with two components. We get a solution that behaves differently than pure water. Such a solution is called a chemical system. Phase is a formation, which has stable chemical and physical properties and which can be separated from other similar structures. It may be formed of one, two or more components. Exercise 2 Match the English words to the correct Czech. 1. mother liquor a) fáze 2. saturated b) složka 3. phase c) matečný louh 4. component d) nasycený 5. cool e) rozpustit 6. dissolve f) ochladit 7. crystals g) roztok 8. solution h) krystalky Experiment: If we dissolve 3.84% of NaCl in water, cool the solution to -3.25°C and keep the temperature in the same level, crystals of ice appear. Then we can separate the ice from the solution. The solution enriched of NaCl (salt) is called mother liquer. Mother liquer is saturated whereas ice. The temperature -3.25°C devided the chemical system H2O – NaCl into two parts – phases. Key 1 student’s answers 2 1 c, 2 d, 3 a, 4 b, 5 f, 6 e, 7 h, 8 g Dictionary English Pronunciation Czech chemical property /ˈkɛmɪk(ə)l ˈprɒpəti/ chemická vlastnost chemical system /ˈkɛmɪk(ə)l ˈsɪstəm/ chemická soustava component /kəmˈpəʊnənt/ složka dissolve /dɪˈzɒlv/ rozpustit mother liquor /ˈmʌðə ˈlɪkə/ matečný louh phase /feɪz/ fáze physical property /ˈfɪzɪk(ə)l ˈprɒpəti/ fyzikální vlastnost precipitate /prɪˈsɪpɪteɪt/ vylučovat saturated solution /ˈsatʃəreɪtɪd səˈluːʃ(ə)n/ nasycený roztok separate /ˈsɛp(ə)rət/ oddělit solution /səˈluːʃ(ə)n/ roztok stable /ˈsteɪb(ə)l/ stabilní system /ˈsɪstəm/ soustava table salt /ˈteɪb(ə)l sɔːlt/ kuchyňská sůl two-component system /tuː kəmˈpəʊnənt ˈsɪstəm/ dvousložková soustava soustava o dvou složkách Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Phase Rule Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se zákonem fází. jazykový – Reading, conjunctions Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 10 YEAR: 3 Phase Rule SUBJECT: Technology 10. Phase Rule Exercise 1 Complete the text with the words from the box. and (2x) but which Chemically pure substances, 1__________ can pass a given set of phases, is called components of the system. For example the waterice system consists of two phases for one component – water. The number of components can be changed variously in various systems. For example pure metal is one component system 2__________ an alloy of two metals is a system of two components. Each system is capable of specific changes (variations) 3___________ has a certain number of degrees of freedom. Number of degrees of freedom is number of external 4__________ internal factors (temperature, pressure, concentration, etc.) that may be varied independently without changing the number of phases. Gibbs Phase Rule The degrees of freedom of a system indicate the number of variables that can be arbitrarily specified without modifying the system, hence: DEGREES OF FREEDOM = NUMBER OF VARIABLES - NUMBER OF COSTRAINTS For nonreacting systems, this relationship can be translated into the following equation, known as the Gibbs Phase Rule: F=C-P+2 with F = degree of freedom; C = number of components; P = number of phases. 2 = number of independent variables (pressure and temperature) For a system with 2 components and 2 phases (e.g. vapour and liquid), the number of degrees of freedom is 2. The Invariant System has no degree of freedom. The Univariant System has one degree of freedom. The Bivariant System has two degrees of freedom. Exercise 2 The ice-water-vapour system is a system of one component – water. Use Gibbs phase rule to answer this question. What is this system called like? (invariant / univariant / bivariant) Key 1 1 which, 2 but, 3 and, 4 and 2 invariant. Dictionary English Pronunciation Czech bivariant system /baɪˈvɛərɪənt ˈsɪstəm / bivariantní soustava chemical system /ˈkɛmɪk(ə)l ˈsɪstəm/ chemická soustava component /kəmˈpəʊnənt/ složka, komponenta concentration /kɒns(ə)nˈtreɪʃ(ə)n/ koncentrace constant /ˈkɒnst(ə)nt/ konstantní degree of freedom /dɪˈgriː ɒv ˈfriːdəm/ stupeň volnosti dependent variable /dɪˈpɛnd(ə)nt ˈvɛːrɪəb(ə)l/ závisle proměnná external conditions /ɪkˈstəːn(ə)l kənˈdɪʃ(ə)n/ vnější podmínky independent variable /ɪndɪˈpɛnd(ə)nt ˈvɛːrɪəb(ə)l/ nezávisle proměnná invariant system /ɪnˈvɛːrɪənt ˈsɪstəm/ invariantní soustava nonvariantní soustava phase rule /feɪz ruːl/ zákon fází pressure /ˈprɛʃə/ tlak system /ˈsɪstəm/ soustava temperature /ˈtɛmp(ə)rətʃə/ teplota univariant system /ˈjuːnivɛːrɪənt ˈsɪstəm/ univariantní soustava monovariantní soustava variable /ˈvɛːrɪəb(ə)l proměnná Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Metals and Their Alloys Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s kovy a jejich slitinami. jazykový – Present simple, passives, vocabulary, listening Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 11 Metals and Their Alloys SUBJECT: Technology 11. Metals and Their Alloys Metal is element with these properties: 1. characteristic lustre, opaque 2. high ductility and forgeability 3. high thermal and electrical conductance 4. high electropositive – basic character Metals belong to three groups: A – alkaline metals (e.g. Na, K, Ca, Mg, Li, Be etc.) low melting point and poor mechanical properties T – technically the most valuable (e.g. Ti, V, Cr, Mn, Fe, Co, Ni, Mo,Ta, W, Ir, Pt etc.) high melting point, good mechanical properties B – transition to non-metal (e.g. B, C, Si, Ge, As, Se etc.) Exercise 1 Complete the text with a correct form of the verbs in brackets. Pure metals 1_________ (have) low strength and high ductility. In engineering they 2_________ (be) are less useful. That 3________ (be) is why we add other metals or non-metals into them to make alloys. Alloys 2_________ (have) have better strength, hardness, durability and toughness. All alloys 5____________ (crystallize). Homogeneous alloy 6____________ (contain) crystals of one kind only. Heterogeneous alloy 7________ (be) formed of crystals of two or more kinds. Alloy constituents 8________ (be) called components. The properties of alloys 9_______ (be) absolutely different from properties of metals they 10_______ (be) made of. Exercise 2 Watch a video “What is an Alloy? - Naked Science Scrapbook” (6:44) and try to answer the questions below. https://www.youtube.com/watch?v=9LHDSB1n11k 1. What is an alloy? 2. Is making alloys a new technology? 3. How old is this technology? 4. Which alloy doesn’t corrode? 5. Why most jewellery is not pure gold? 6. Why do we make alloys? Exercise 3 Match the words. 1. Ductility a) neprůhledný 2. Properties b) tažnost 3. Forgeability c) slitina 4. thermal conductance d) čistý kov 5. crystal lattice e) kujnost 6. alloy f) krystalická mřížka 7. pure metal g) tepelná vodivost 8. hardness h) tvrdost 9. strength i) nízká teplota tání 10. durability j) lesk 11. low melting point k) pevnost 12. opaque l) vlastnosti 13. lustre m) trvanlivost Key 1 1 have, 2 are, 3 is, 4 have, 5 crystallize, 6 contains, 7 is, 8 are, 9 are, 10 are 2 1 Mixture of base metal and additional elements. 2 No, it isn’t. 3 It is known for 1000’s of years. 4 Stainless steel. 5 Pure gold is too soft. 6 To change the properties of metals. 3 1 c, 2 l, 3 e, 4 g, 5 f, 6 c, 7 d, 8 h, 9 k, 10 m, 11 i, 12 a, 13 j Dictionary English Pronunciation Czech alkali /ˈalkəlʌɪ/ zásada alkali metal /ˈalkəlʌɪ ˈmɛt(ə)l/ alkalický kov alloy /ˈalɔɪ/ slitina alloying element /ˈalɔɪɪŋ ˈɛlɪm(ə)nt/ přísadový prvek, legura alloying metal /ˈalɔɪɪŋ ˈmɛt(ə)l/ přísadový kov chemical element /ˈkɛmɪk(ə)l ˈɛlɪm(ə)nt/ chemický prvek component /kəmˈpəʊnənt/ složka slitiny electric conductivity /ɪˈlɛktrɪk kɒndʌkˈtɪvɪti/ elektrická vodivost ductility /dʌkˈtɪlɪtɪ/ tažnost formability /fɔːməˈbɪlɪti/ tvárnost hardness /ˈhɑːdnəs/ tvrdost malleability /ˈmalɪəˈbɪlɪti/ kujnost mechanical property /mɪˈkanɪk(ə)l ˈprɒpəti/ mechanická vlastnost melting point /ˈmɛltɪŋ pɔɪnt/ teplota tání, teplota tavení metal /ˈmɛt(ə)l/ kov non-metal /nɒnˈmɛt(ə)l / nekov pure metal /pjʊə ˈmɛt(ə)l/ čistý kov strength /strɛŋθ/ pevnost thermal conductivity /ˈθəːm(ə)l kɒndʌkˈtɪvɪti/ tepelná vodivost toughness /tʌfnɛs/ houževnatost transition metal /tranˈzɪʃ(ə)n ˈmɛt(ə)l/ tranzitní kov, přechodný kov Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Cooling and Heating of Pure Metal Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s chladnutím a ohřevem čistého kovu. jazykový – Developing reading and listening skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 12 Cooling and Heating of Pure Metal SUBJECT: Technology 12. Cooling and Heating of Pure Metal Exercise 1 questions. Read the text below and answer these 1. What is polymorphism? 2. What is univariant system? 3. What does arrest mean? Polymorphism is an ability of a substance to crystallize in various systems. Perfectly pure metal is one component system and one phase. According to phases law it is univariant system, which means, we can change temperature of melting and boiling without change of a character of the system. We observe cooling or heating of pure metal and measure temperature and time. During the time of cooling or heating there appears irregularity called arrest. The internal material conversion arises. While heating the temperature of conversion is higher than while cooling. It is a result of thermal hysteresis. Polymorphic metal has more arrests and there also occurs recrystallization. Each modification of polymorphic metal exists only in one temperature range. Exercise 2 Click on the link below to watch the video ‘Reading Heating and Cooling Curves’ (4:59) and answer these questions. 1. When the temperature remain constant in the heating curve diagram? 2. When the temperature remain constant in the cooling curve diagram? https://www.youtube.com/watch?v=hrUZnXHERao Key 1 1 The ability of a substance to crystallize in various systems. 2 System with one component and one phase. 3 It is irregularity which appears during the time of cooling or heating. 2 1 During melting and boiling. 2 During condensation and freezing. Dictionary English Pronunciation Czech allotropy, allotropism /əˈlɒtrəpɪ/, /əˈlɒtrəpɪz(ə)m/ alotropie allotropic change /əˈlɒtrəpɪk tʃeɪn(d)ʒ/ alotropická přeměna arrest /ərɛst/ prodleva na křivce cooling /kuːlɪŋ/ chladnutí cooling and heating curve /kuːlɪŋ ənd ˈhiːtɪŋ kəːv/ křivka chladnutí a ohřevu curve /kəːv/ křivka fall /fɔːl/ pokles graph /ɡrɑːf/ graf heating /ˈhiːtɪŋ/ ohřev horizontal axis (X-axis) /hɒrɪˈzɒnt(ə)l ˈaksɪs/ vodorovná osa (osa x) melting point /mɛltɪŋ pɔɪnt/ bod tání metastable /ˌmɛtəˈsteɪb(ə)l/ metastabilní modification /ˌmɒdɪfɪˈkeɪʃ(ə)n/ modifikace polymorphous /ˌpɒlɪˈmɔːfəs/ polymorfní polymorphism /ˌpɒlɪˈmɔːfɪz(ə)m/ polymorfie pure metal /pjʊə ˈmɛt(ə)l/ čistý kov recrystallization /riːˈkrɪst(ə)lʌɪˈzeɪʃ(ə)n/ rekrystalizace rise /rʌɪz/ vzestup stable /ˈsteɪb(ə)l/ stabilní transformation /transfəˈmeɪʃ(ə)n/ přeměna univariant system /ˈjuːnivɛːrɪənt ˈsɪstəm/ univariantní soustava vertical axis (Y-axis) /ˈvəːtɪk(ə)l ˈaksɪs/ svislá osa (osa y) temperature /ˈtɛmp(ə)rətʃə/ teplota temperature range /ˈtɛmp(ə)rətʃə reɪn(d)ʒ/ teplotní rozmezí thermal hysteresis /ˈθəːm(ə)l ˌhɪstəˈriːsɪs/ tepelná hystereze time /tʌɪm/ čas Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Crystallization of Pure Metals Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s krystalizací čistých kovů. jazykový – Present simple, prepositions, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 13 YEAR: 3 Crystallization of Pure Metals SUBJECT: Technology 13. Crystallization of Pure Metal Exercise 1 a) begins Complete the text with the words from the box. b) is c) are d) in e) of When a metal 1________ cooled below the temperature 2_______ solidification, the liquid metal changes phase, it crystallizes. Crystals 3________ formed gradually 4________ the cooling melt. Crystal growth 5_________ in the so-called crystal nucleus (center). In the course of crystallization two variables have a major influence: 1. speed of germs formation 2. speed of crystal growth Exercise 2 Match the English phrases with the Czech. 1. grain contact surface a) podchlazení 2. speed of crystal growth b) krystalizační zárodek 3. undercooling c) styčná plocha zrn 4. crystal nucleus d) rychlost růstu krystalů Key 1 1 b, 2 e, 3 c, 4 d, 5 a 2 1 c, 2 d, 3 a, 4 b Dictionary English Pronunciation Czech cooling /kuːlɪŋ/ ochlazování crystal growth /ˈkrɪst(ə)l grəʊθ/ růst krystalů crystal growth rate /ˈkrɪst(ə)l grəʊθ reɪt/ rychlost růstu krystalů crystallization /krɪst(ə)lʌɪˈzeɪʃ(ə)n/ krystalizace grain /greɪn / zrno grain boundary /greɪn ˈbaʊnd(ə)ri/ hranice zrna melt /mɛlt/ tavenina nucleation /njuːklɪˈeɪʃ(ə)n/ tvorba zárodků nucleation rate /njuːklɪˈeɪʃ(ə)n reɪt/ rychlost tvorby zárodků nucleus /ˈnjuːklɪəs/ krystalizační zárodek primary structure /ˈprʌɪm(ə)ri ˈstrʌktʃə/ primární struktura pure metal /pjʊə ˈmɛt(ə)l/ čistý kov secondary structure /ˈsɛk(ə)nd(ə)ri ˈstrʌktʃə/ sekundární struktura solidification /səlɪdɪfɪˈkeɪʃ(ə)n/ tuhnutí solidification temperature /səlɪdɪfɪˈkeɪʃ(ə)n ˈtɛmp(ə)rətʃə/ teplota tuhnutí solidified melt /səˈlɪdɪfʌɪd mɛlt/ ztuhlá tavenina undercooling /´ʌndəkuːlɪŋ / podchlazení Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Polymorphism of Iron Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s polymorfií železa. jazykový – Reading skills, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 14 Polymorphism of Iron SUBJECT: Technology 14. Iron Polymorphism Exercise 1 Click on the link to watch the video ‘How allotropic forms of Iron work’ (3:02) then do the exercise 2. https://www.youtube.com/watch?v=QPjRNsqdg6s 2 Obrázek 2 Curve of cooling and heating pure iron Exercise 2 Read the text below then label the diagram above with the phrases from the box. a) Curie point d) time (s) 2 b) temperature (°C) e) ferromagnetic iron c) liquid alloy (2x) f) paramagnetic iron Upravený obrázek - Hluchý, Kolouch, Paňák: Strojírenská technologie 1, str.34 to 911 °C – stable modification α – cubic lattice, space-centred 911°C to 1392°C – metastable modification γ – cubic lattice, face centred 1392°C to 1539°C – metastable modification α (can be labelled also as δ, because it is metastable) above 1539°C – liquid alloy (melt) 760°C – Curie point – iron loses its ferromagnetic properties and becomes paramagnetic (non-magnetic) 760°C – 911°C – can be labelled as β, because it is paramagnetic Exercise 3 Click on the link below to watch the video ‘Allotropes of Iron’ (10:26) and answer these questions. 1. What is the demonstration about? 2. What are the paper clip designed to be like? 3. What is allotropes? https://www.youtube.com/watch?v=jYrQhvKAhkc Key 2 1 b, 2 c, 3 a, 4 d, 5 e, 6 f, 7 c 3 1 It shows what happens inside of molecular structure. 2 To be springy and hold the bend very carefully. 3 Different arrangement of atoms in the same element. Dictionary English Pronunciation Czech body-centred cubic (BCC) lattice /ˈbɒdi ´sɛntəd ˈkjuːbɪk ˈlatɪs/ mřížka krychlová prostorově středěná cooling curve /kuːlɪŋ kəːv/ křivka chladnutí Curie point /ˈkjʊəri pɔɪnt/ Curieho bod degree centigrade /dɪˈgriː ˈsɛntɪgreɪd/ stupeň Celsia face-centred cubic (FCC) lattice /feɪs ˈsɛntəd ˈkjuːbɪk ˈlatɪs/ mřížka krychlová plošně středěná ferromagnetic /ˌfɛrə(ʊ)magˈnɛtɪk/ feromagnetický graph /ɡrɑːf/ graf heating curve /ˈhiːtɪŋ kəːv/ křivka ohřevu iron /ˈʌɪən/ železo liquid /ˈlɪkwɪd/ tekutý melt /mɛlt/ tavenina metastable /ˌmɛtəˈsteɪb(ə)l / metastabilní modification /ˌmɒdɪfɪˈkeɪʃ(ə)n/ modifikace paramagnetic /parəmagˈnɛtɪk/ paramagnetický polymorphism /ˌpɒlɪˈmɔːfɪz(ə)m/ polymorfie property /ˈprɒpəti / vlastnost solid /ˈsɒlɪd/ pevná látka temperature /ˈtɛmp(ə)rətʃə/ teplota temperature difference /ˈtɛmp(ə)rətʃə ˈdɪf(ə)r(ə)ns/ rozdíl teplot thermal hysteresis /ˈθəːm(ə)l ˌhɪstəˈriːsɪs/ tepelná hystereze time /tʌɪm/ čas Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Phase Diagrams of Binary Alloys Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s rovnovážným diagramem binární slitiny . jazykový – vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 15 SUBJECT: Phase Diagrams of Binary Alloys Technology 15. Equilibrium Diagram of Binary Alloy Exercise 1 Label the paragraph 1-3 with the titles a-c. a) Partial (limited) solubility b) Complete (perfect) insolubility c) Complete (perfect) solubility Solubility in solid state – ability to form solid solutions Types: 1. __________________________ It is an ability to form a solid solution in the entire concentration range (for example Ni-Cu, Au-Ag, Au-Pt, Bi-Sb, MgO-FeO, MgO-NiO). 2. __________________________ It is an ability to form a solid solution only at certain concentrations (for example Pb-Sn, Al-Si, Cu-Ag). 3. __________________________ It is an inability to form a solid solution (for example Sn-Zn, Bi-C). Exercise 2 Use the words from the box to match the Czech terms in the diagram. a) liquid alloy b) liquidus line d) solidus line e) concentration Obrázek 3 Binary equilibrium diagram of ingredients completely soluble in solid state 3 Vlastní dílo c) temperature 3 Key 1 1 c, 2 a, 3 b 2 1 c, 2 d, 3 e, 4 b, 5 a Dictionary English Pronunciation Czech arrest /əˈrɛst/ prodleva binary alloy /ˈbʌɪnəri ˈalɔɪ/ binární slitina complete solubility /kəmˈpliːt ˈsɒljʊˈbɪlɪti/ úplná rozpustnost concentration /kɒns(ə)nˈtreɪʃ(ə)n/ koncentrace cooling curve / kuːlɪŋ kəːv / křivka chladnutí crystallization /krɪst(ə)lʌɪˈzeɪʃ(ə)n/ krystalizace end of transformation /ɛnd ɒv transfəˈmeɪʃ(ə)n/ konec přeměny equilibrium diagram /ˌiːkwɪˈlɪbrɪəm ˈdʌɪəɡram/ rovnovážný diagram insolubility /ɪnsɒljʊˈbɪlɪti/ nerozpustnost limited solubility /ˈlɪmɪtɪd sɒljʊˈbɪlɪti/ omezená rozpustnost partial solubility /ˈpɑːʃ(ə)l sɒljʊˈbɪlɪti/ částečná rozpustnost phase /feɪz/ fáze phase diagram /feɪz ˈdʌɪəɡram/ fázový diagram phase equilibrium /feɪz ˌiːkwɪˈlɪbrɪəm/ rovnováha fází solid solubility, solubility in solid state /ˈsɒlɪd sɒljʊˈbɪlɪti/, /ˈsɒljʊˈbɪlɪti ɪn ˈsɒlɪd steɪt/ rozpustnost v tuhém stavu solubility /sɒljʊˈbɪlɪti/ rozpustnost start of transformation /stɑːt ɒv transfəˈmeɪʃ(ə)n/ začátek přeměny temperature /ˈtɛmp(ə)rətʃə/ teplota temperature interval /ˈtɛmp(ə)rətʃə ˈɪntəv(ə)l/ teplotní interval Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Binary Alloys - Two Metals Completely Soluble Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s binárními slitinami úplně rozpustných dvou kovů. jazykový – Word order Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 16 YEAR: 3 SUBJECT: Technology Binary Alloys - Two Metals Completely Soluble 16. Binary Alloys - Two Metals Completely Soluble Exercise 1 Put the words in the correct order to make sentences 1-3. in Two metals completely soluble solid and liquid state A and B are 1 _______________________________________________________. I – 80% A, 20% B II – 50% A, 50% B III – 20% A, 80% B will arise LIQUIDUS the start points of from crystallization a line that is 2 _______________________________________________________. from of crystallization all points is SOLIDUS will arise that a line 3 _______________________________________________________. Solid solution – crystal that contains atoms of both components Substitutional solid solution – additive metal atoms occupy randomly nodal sites in the lattice of basic metal. Interstitial solid solution – additive metal atoms are deposited in the interstitial position. They occupy randomly nodal sites in the lattice of basic metal. Key 1 1 Two metals A and B are completely soluble in solid and liquid state. 2 LIQUIDUS is a line that will arise from the start points of crystallization. 3 SOLIDUS is a line that will arise from all points of crystallization. Dictionary English Pronunciation Czech binary alloy /ˈbʌɪnəri ˈalɔɪ/ binární slitina complete solubility /kəmˈpliːt ˈsɒljʊˈbɪlɪti/ úplná rozpustnost concentration /kɒns(ə)nˈtreɪʃ(ə)n/ koncentrace curve / kəːv/ křivka diffusion /dɪˈfjuːʒ(ə)n/ difúze interstitial solid solution /ˌɪntəˈstɪʃ(ə)l ˈsɒlɪd səˈluːʃ(ə)n/ intersticiální tuhý roztok interstition / ɪntəːˈstɪʃ(ə)n / interstice limited solubility /ˈlɪmɪtɪd sɒljʊˈbɪlɪti/ omezená rozpustnost liquidus /ˈlikwidəs/ likvidus melt /mɛlt/ tavenina node /nəʊd/ uzlový bod mřížky occupy / ˈɒkjʊpʌɪ/ obsadit particle / ˈpɑːtɪk(ə)l/ částice solid solution / sɒlɪd səˈluːʃ(ə)n/ tuhý roztok solidus /ˈsɒlɪdəs/ solidus soluble /ˈsɒljʊb(ə)l/ rozpustný substitution /sʌbstɪˈtjuːʃn/ substituce substitutional solid solution /sʌbstɪˈtjuːʃn(ə)l sɒlɪd səˈluːʃ(ə)n/ substituční tuhý roztok unlimited solubility /ʌnˈlɪmɪtɪd sɒljʊˈbɪlɪti/ neomezená rozpustnost vacancy /ˈveɪk(ə)nsi/ vakance Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Binary Alloys - Two Components Completely Soluble in Liquid State and Insoluble in Solid State Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s dvěma složkami v tekutém stavu úplně rozpustnými a v tuhém stavu nerozpustnými. jazykový – Making questions Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 17 Binary Alloys - Two Components Completely Soluble in Liquid State and Insoluble in Solid State SUBJECT: Technology 17. Binary Alloys - Two Metals Insoluble in Solid State Exercise 1 Read the following text and make questions 13 to the sentences above. Two solutions A and B are completely soluble in liquid state and insoluble in solid state. 1 ______________________________________________________? EUTECTICUM forms a structure in alloys, which can be recognizable under a microscope. 2 ______________________________________________________? Lamellar eutecticum – fine strips formed by crystals of both metals stored close together. Globular eutecticum – one metal forms a matrix where crystals of another metal (in shape of fine grains) are saved. Eutecticum always crystallizes secondarily. 3 ______________________________________________________? Primarily the crystals, that form the frame, always crystallise. Then eutecticum fills the space among the crystals formed primarily. Key 1 Sample answers: 1 Are the two solutions A and B completely soluble in liquid state and insoluble in solid state? 2 What a structure in alloys does eutecticum form? 3 How often does eutecticum crystallize secondarily? Dictionary English Pronunciation Czech binary alloy /ˈbʌɪnəri ˈalɔɪ/ binární slitina binary diagram /ˈbʌɪnəri ˈdʌɪəɡram/ binární diagram complete solubility, total /kəmˈpliːt ˌsɒljʊˈbɪləti/, /ˈtəʊt(ə)l ˌsɒljʊˈbɪləti/ solubility úplná rozpustnost component /kəmˈpəʊnənt/ složka composition /kɒmpəˈzɪʃ(ə)n/ chemické složení cooling curve /ˈkuːlɪŋ kəːv/ křivka chladnutí crystal /ˈkrɪst(ə)l/ krystal eutectic /juːˈtɛktɪk/ eutektikum eutectic point /juːˈtɛktɪk pɔɪnt/ eutektický bod eutectic transformation /juːˈtɛktɪk transfəˈmeɪʃ(ə)n/ eutektická přeměna fine grain /fʌɪn greɪn/ jemné zrno globular eutectic /ˈglɒbjʊlə juːˈtɛktɪk/ globulární eutektikum, zrnité eutektikum insolubility / ɪnˌsɒljʊˈbɪləti/ nerozpustnost insoluble /ɪnˈsɒljʊb(ə)l/ nerozpustný lamellar eutectic /ləˈmɛlə juːˈtɛktɪk/ lamelární eutektikum, páskové eutektikum solid solution / ˈsɒlɪd səˈluːʃ(ə)n/ tuhý roztok solidify /sɒˈlɪdɪfʌɪ/ tuhnout solubility /ˌsɒljʊˈbɪləti/ rozpustnost solubility in liquid state, liquid solubility solubility in solid state, solid solubility /ˌsɒljʊˈbɪləti ɪn ˈlɪkwɪd steɪt/, rozpustnost v tekutém / ˈlɪkwɪd ˌsɒljʊˈbɪləti/ stavu / ˌsɒljʊˈbɪləti ɪn ˈsɒlɪd steɪt/, / rozpustnost v tuhém stavu ˈsɒlɪd ˌsɒljʊˈbɪləti/ soluble /ˈsɒljʊb(ə)l/ rozpustný temperature /ˈtɛmp(ə)rətʃə/ teplota time /tʌɪm/ čas Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: State Binary Alloys - Two Metals with Limited Solubility in Solid Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se dvěma kovy se změněnou rozpustností. jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 18 SUBJECT: Binary Alloys - Two Metals with Technology Limited Solubility in Solid State 18. Two Metals with Solubility Change in Solid State Exercise 1 Read the text below and label the paragraph 12 with the title a-b. a) PRECIPITATION b) SEGREGATION Solidus curves determinate the area of mutual solubility of both metals. Eutectic line determinates the area of mutual insolubility of both metals. 1________________ – a new phase is excreted preferably at grain boundaries at sufficiently high temperatures of equilibrium saturation state. The amount of excluded segregate is very small so its liberation isn’t related to any thermal phenomenon. Segregation usually produces an adverse effect on the quality of metal, since it leads to irregularity of its properties. 2________________ – is excretation of fine particle of new phases from supersaturated solution inside of grains. Condition of precipitation is formation of a solid solution. It exhibits increased toughness and increase of the yield point. Exercise 2 According to the text above answer these questions below. What is determinated by Solidus curves? a) The area of mutual solubility of both metals. b) The area of mutual insolubility of both metals. What is determinated by Eutectic line? a) The area of mutual solubility of both metals. b) The area of mutual insolubility of both metals. Key 1 1 b, 2 a 2 1 a, 2 b Dictionary English Pronunciation Czech binary diagram /ˈbʌɪnəri ˈdʌɪəgram/ binární diagram equilibrium diagram /ˌiːkwɪˈlɪbrɪəm ˈdʌɪəgram/ rovnovážný diagram eutectic line /juːˈtɛktɪk lʌɪn/ eutektická přímka grain boundary /greɪn ˈbaʊnd(ə)ri/ hranice zrna insolubility /ɪnsɒljʊˈbɪlɪti/ nerozpustnost limited solubility /ˈlɪmɪtɪd ˌsɒljʊˈbɪləti/ omezená rozpustnost liquidus /ˈlikwidəs/ likvidus precipitate /prɪˈsɪpɪteɪt/ vylučovat se precipitation /prɪˌsɪpɪˈteɪʃ(ə)n/ precipitace saturation /satʃəˈreɪʃ(ə)n/ nasycení segregation /ˌsɛɡrɪˈɡeɪʃ(ə)n/ segregace solid solution / ˈsɒlɪd səˈluːʃ(ə)n/ tuhý roztok solidus /ˈsɒlɪdəs/ solidus solubility curve /sɒljʊˈbɪlɪti kəːv/ křivka rozpustnosti solubility in solid state, solid solubility /sɒljʊˈbɪlɪti ɪn ˈsɒlɪd steɪt/, / rozpustnost v tuhém stavu ˈsɒlɪd ˌsɒljʊˈbɪləti/ soluble /ˈsɒljʊb(ə)l/ rozpustný supersaturated solid solution /suːpəˈsatʃəreɪtɪd ˈsɒlɪd /səˈluːʃ(ə)n/ přesycený tuhý roztok Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Iron-Carbon Equilibrium Diagram Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s významem a použitím rovnovážného diagramu Fe-C jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 19 YEAR: 3 Iron-Carbon Equilibrium Diagram SUBJECT: Technology 19. Equilibrium Diagram Fe-C Exercise 1 Read the text and answer the questions below. 1. What is the main additive of iron alloys? 2. What is the solid solution of carbon in α-Fe called? 3. Which system is carbon eliminated as graphite in? Pure iron exists in two crystalline modifications: Iron with a body centred cubic lattice named α-Fe is stable at temperatures below 911°C. Iron at temperatures 910 – 1392°C has face centred cubic lattice and is named γ-Fe. At temperatures over 1392°C there is again stable modification with a body centred cubic lattice named δ-Fe. The melting point of pure iron is at temperature 1539°C. Carbon is the main additive of iron alloys. It creates interstitial solid solution with iron. Solid solution of carbon in α-Fe is called ferrite. Solubility of carbon in α-Fe is very low (max. 0,018% at temperature 723°C). Solid solution of carbon in γ-Fe is called austenite. Solubility of carbon in γ-Fe is substantially higher (max. 2,11% at temperature 1147°C). Solid solution of carbon in δ-Fe is called δ-ferrite. At higher carbon content elimination of iron carbide Fe3C (cementite) occurs. The Iron - Carbon Equilibrium Phase Diagram is one of the most important diagrams of mankind. It shows the areas of stability of individual structural components under equilibrium conditions. We distinguish: 1. Binary system stable iron – graphite in which carbon is eliminated as graphite) (Important for cast-iron) 2. Binary system metastable iron – carbide in which carbon is bound as iron carbide. (Important for steel) Key 1 1 Carbon, 2 ferrite, 3 Binary system stable iron Dictionary English Pronunciation Czech alpha iron /ˈalfə ˈʌɪən/ železo alfa austenite /ˈɒstɪnʌɪt/ austenit binary system / ˈbʌɪnəri ˈsɪstəm/ binární soustava body-centred cubic (BCC) lattice /ˈbɒdi ´sɛntəd ˈkjuːbɪk ˈlatɪs/ mřížka krychlová prostorově středěná carbon / ˈkɑːb(ə)n/ uhlík cast iron /kɑːst ˈʌɪən/ litina cementite / sɪˈmɛntʌɪt/ cementit crystal modification / ˈkrɪst(ə)l ˌmɒdɪfɪˈkeɪʃ(ə)n/ krystalická modifikace delta iron /ˈdɛltə ˈʌɪən/ železo delta face-centred cubic (FCC) lattice /feɪs ˈsɛntəd ˈkjuːbɪk ˈlatɪs/ mřížka krychlová plošně středěná ferrite / ˈfɛrʌɪt/ ferit gamma iron /ˈɡamə ˈʌɪən/ železo gama graphite /ˈɡrafʌɪt/ grafit interstitial solid solution /ˌɪntəˈstɪʃ(ə)lˈsɒlɪd səˈluːʃ(ə)n/ intersticiální tuhý roztok iron / ˈʌɪən/ železo iron carbide /ˈʌɪən ˈkɑːbʌɪd/ karbid železa iron-carbon equilibrium diagram /ˈʌɪən ˈkɑːb(ə)n equilibrium ˈdʌɪəɡram/ rovnovážný diagram železo-uhlík melting point / mɛltɪŋ pɔɪnt/ bod tání, bod tavení metastable / ˌmɛtəˈsteɪb(ə)l/ metastabilní solid solution / ˈsɒlɪd səˈluːʃ(ə)n/ tuhý roztok stable / ˈsteɪb(ə)l/ stabilní steel /stiːl/ ocel Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Stable System Iron-Graphite Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se stabilní soustavou železo - grafit jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 20 YEAR: 3 SUBJECT: Technology Stable System Iron-Graphite 20. The Iron-Graphite System Exercise 1 as the Complete the text with the words from the box. hand specifically therefore also during All of 1__________ carbon is precipitated 2__________ graphite during solidification. 3__________ further cooling, the secondary graphite precipitates 4__________ out undergoes of the austenite. eutectoid The austenite decomposition here, 5__________ into ferrite and graphite. In ferritic cast iron, the structure consists of a purely ferritic metal matrix with graphite embedded in it. Generally, a gray solidification of cast iron can be forced according to the stable system. A eutectoid transformation into purely ferrite and graphite, on the other 6__________, is more difficult, as with progressive cooling. 7__________, the eutectoid decomposition of the austenite rapidly changes in the meta-stable system. There pearlite is formed. Pearlite-stabilizing additives in cast iron enable the achievement of a purely pearlitic structure. 4 4 Iron-carbon phase diagram. Foundry lexicon [online]. 2015 [cit. 2015-04-04]. Dostupné z: http://www.giessereilexikon.com/en/foundrylexicon/?tx_contagged%5Bsource%5D=default&tx_contagged%5Buid%5D=4283&tx_contagged%5BbackPid%5 D=3&cHash=d0c9b0c28d39dfa8c849cb266e500d23. Exercise 1 Find seven words from the text above in the puzzle. The direction of the words can be down, up or forwards. Key 1 1 the, 2 as, 3 during, 4 also, 5 specifically, 6 hand, 7 therefore Dictionary English Pronunciation Czech austenite /ˈɒstɪnʌɪt/ austenit carbon /ˈkɑːb(ə)n/ uhlík cast iron /kɑːst ˈʌɪən/ litina cementite / sɪˈmɛntʌɪt/ cementit cooling /ˈkuːlɪŋ/ chladnutí constituent / kənˈstɪtjʊənt/ složka crystallization /ˌkrɪstələˈzeɪʃən/ krystalizace graphite /ˈɡrafʌɪt/ grafit graphite eutectic /ˈɡrafʌɪt juːˈtɛktɪk/ grafitové autektikum graphite eutectoid /ˈɡrafʌɪt juːˈtɛktɔɪd/ grafitový eutektoid grey cast iron /ɡreɪ kɑːst ˈʌɪən/ šedá litina grey pig iron /ɡreɪ pɪg ˈʌɪən/ šedé surové železo eutectic /juːˈtɛktɪk/ eutektikum eutectic point /juːˈtɛktɪk pɔɪnt/ eutektický bod eutectic transformation /juːˈtɛktɪk transfəˈmeɪʃ(ə)n/ eutektická přeměna eutectoid eutektoid ferrite /juːˈtɛktɔɪd /juːˈtɛktɔɪd transfəˈmeɪʃ(ə)n/ / ˈfɛrʌɪt/ iron / ˈʌɪən/ železo ledeburite /ˈlɛdɛbʊrʌɪt/ ledeburit pearlite /ˈpəːlʌɪt/ perlit primary graphite /ˈprʌɪm(ə)ri ˈɡrafʌɪt/ primární grafit secondary graphite /ˈsɛk(ə)nd(ə)ri ˈɡrafʌɪt/ sekundární grafit solidification /səlɪdɪfɪˈkeɪʃ(ə)n/ tuhnutí stable /ˈsteɪb(ə)l/ stabilní eutectoid transformation stable system iron-graphite system /ˈsteɪb(ə)l ˈɡrafʌɪt/ / ˈsɪstəm/ ˈsɪstəm eutektoidní přeměna ferit ˈʌɪən stabilní soustava grafit soustava železo- Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Diagram Influence of Alloying Elements on Iron-Iron Carbide Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s vlivem legovacích prvků na diagram Fe - Fe3C. jazykový – Vocabulary, reading Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 21 Influence of Alloying Elements on Iron-Iron Carbide Diagram SUBJECT: Technology 21. Effect of Alloying Elements on the diagram Fe – Fe3C Effect of alloying elements on the properties of steel and cast-iron: Nickel - unlimited solubility in iron γ, partial solubility in iron α, opens γ area. It increases strength, impact strength and toughness, impart corrosion resistance in combination with other elements. Manganese - unlimited solubility in iron γ, lower in iron α, opens γ area. It improves hardenability, ductility and wear resistance. Mn eliminates formation of harmful iron sulfides, increasing strength at high temperatures. Chrome - unlimited solubility in iron α, partial in iron γ, closes γ area. It improves hardenability, strength and wear resistance, sharply increases corrosion resistance at high concentrations (> 12%). Silicon - partial solubility in iron α and iron γ, closes γ area. It improves strength, elasticity, acid resistance and promotes large grain sizes, which cause increasing magnetic permeability. Molybdenum - partial solubility in iron α, lower in iron γ, closes γ area. It increases hardenability and strength particularly at high temperatures and under dynamic conditions. Tungsten - partial solubility in iron α and iron γ, closes γ area. It increases hardness particularly at elevated temperatures due to stable carbides, refines grain size. Vanadium - unlimited solubility in iron α, partial in iron γ, closes γ area. It increases strength, hardness, creep resistance and impact resistance due to formation of hard vanadium carbides, limits grain size. Exercise 1 Find seven elements mentioned in the text above in this puzzle. The direction of the words can be down, up or forwards. Key 1 Vanadium, Tungsten, Molybdenum, Silicon, Chrome, Manganese, Nickel Dictionary English accompanying element alloying element austenite-forming element carbide-forming element carbon cast steel chromium /əˈkʌmpəniɪŋ ˈɛlɪm(ə)nt/ /ˈalɔɪɪŋ ˈɛlɪm(ə)nt/ /ˈɒstɪnʌɪt fɔːmɪŋ ˈɛlɪm(ə)nt/ /ˈkɑːbʌɪd fɔːmɪŋ ˈɛlɪm(ə)nt/ /ˈkɑːb(ə)n/ /kɑːst stiːl/ /ˈkrəʊmɪəm/ corrosion resistance /kəˈrəʊʒ(ə)n rɪˈzɪst(ə)ns/ creep resistance element ferrite-forming element graphitizing element hardenability hardness heat resistance influence /kriːp rɪˈzɪst(ə)ns/ iron-iron carbide diagram iron iron carbide manganese molybdenum nickel non-carbide-forming element property silicon strength toughness tungsten vanadium wear resistance Pronunciation / ˈɛlɪm(ə)nt/ /ˈfɛrʌɪt fɔːmɪŋ ˈɛlɪm(ə)nt/ /ˈɡrafɪtʌɪzɪŋ ˈɛlɪm(ə)nt/ / ˈhɑːd(ə)nəˈbɪlɪti/ /ˈhɑːdnəs/ /hiːt rɪˈzɪst(ə)ns/ /ˈɪnflʊəns/ /ˈʌɪən ˈʌɪən ˈkɑːbʌɪd ˈdʌɪəɡram/ /ˈʌɪən/ /ˈʌɪən ˈkɑːbʌɪd/ /ˈmaŋɡəniːz/ /məˈlɪbdənəm/ /ˈnɪk(ə)l/ /nɒn ˈkɑːbʌɪd fɔːmɪŋ ˈɛlɪm(ə)nt/ /ˈprɒpəti/ /ˈsɪlɪk(ə)n/ /strɛŋθ/ /ˈtʌfnəs/ /ˈtʌŋst(ə)n/ /vəˈneɪdɪəm/ /wɛː rɪˈzɪst(ə)ns/ Czech doprovodný prvek legující prvek austenitotvorný prvek karbidotvorný prvek uhlík ocelolitina chrom korozivzdornost, odolnost proti korozi žárupevnost prvek feritotvorný prvek grafitizační prvek prokalitelnost tvrdost žáruvzdornost vliv diagram železo-karbid železa železo karbid železa mangan molybden nikl nekarbidotvorný prvek vlastnost křemík pevnost houževnatost wolfram vanad odolnost proti opotřebení Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Iron-Iron Carbide Metastable System Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s metastabilní soustavou „železo - karbid železa“. jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 22 YEAR: 3 Iron-Iron Carbide Metastable System SUBJECT: Technology 22. Metastable System Fe – Fe3C Exercise 1 the box. a) FERRITE e) LEDEBURITE Label the definitions 1-6 with the titles a-f from b) PERLIT c) CEMENTITE d) EUTEKTOID f) AUSTENIT 1. _______________ – heterogeneous structure formed by diffusive disintegration of solid solution into two chemically and crystallografically different phases. 2. _______________ – solid solution C in iron α (max 0,02% C at the temperature 727°C) 3. _______________ – solid solution C in iron γ (max 2,14% C at the temperature 1147°C) 4. _______________ – eutectoid from lamellas of ferrite and cementite in the ratio 6:1. It arises by austenite decomposition at the temperature 727°C, contains 0,764% C. 5. _______________ – iron carbide Fe3C, contains 6,67% C. It is brittle, hard and not malleable. It doesn’t have allotropic transformation. It loses ferromagnetic properties at the temperature 217°C. 6. _______________ – eutectic mixture of austenite and cementite lamellas in the ratio 1:1. It arises at the temperature 1147°C and contains 4,3% C. Key 1 1 d, 2 a, 3 f, 4 b, 5 c, 6 e Dictionary English Pronunciation Czech austenite /ˈɒstɪnʌɪt/ austenit cementite cementit concentration /sɪˈmɛntʌɪt/ /tʃeɪn(d)ʒ ɪn ˌsɑːljəˈbɪləti ˈlɪmɪt/ /kɒns(ə)nˈtreɪʃ(ə)n/ eutectoid /juːˈtɛktɔɪd/ eutektoid eutectoid line /juːˈtɛktɔɪd lʌɪn/ eutektoidní přímka eutectoid point /juːˈtɛktɔɪd pɔɪnt/ eutektoidní bod eutectoid steel /juːˈtɛktɔɪd stiːl / ocel eutektoidní ferrite /ˈfɛrʌɪt/ ferit globular eutectoid /ˈɡlɒbjʊlə juːˈtɛktɔɪd/ globulární eutektoid hypereutectoid steel /ˈhʌɪpə juːˈtɛktɔɪd stiːl/ ocel nadeutektoidní hypoeutectoid steel /ˈhʌɪpəʊ juːˈtɛktɔɪd stiːl/ ocel podeutektoidní iron /ˈʌɪən/ železo iron carbide /ˈʌɪən ˈkɑːbʌɪd/ karbid železa lamellar eutectoid /ləˈmɛlə juːˈtɛktɔɪd/ lamelární eutektoid ledeburite /ˈlɛdɛbərʌɪt/ ledeburit liquid metastable iron-iron carbide system pearlite /ˈlɪkwɪd/ pearlitic steel /ˈpəːlɪtɪk stiːl/ ocel perlitická primary cementite /ˈprʌɪm(ə)ri sɪˈmɛntʌɪt/ primární cementit secondary cementite /ˈsɛk(ə)nd(ə)ri sɪˈmɛntʌɪt/ sekundární cementit solid solution /ˈsɒlɪd səˈluːʃ(ə)n/ tuhý roztok solidification /səˌlɪdəfəˈkeɪʃən/ tuhnutí solubility /ˌsɑːljəˈbɪləti/ rozpustnost temperature /ˈtɛmp(ə)rətʃə/ teplota tertiary cementite /ˈtəːʃ(ə)ri sɪˈmɛntʌɪt/ terciární cementit transformation curve /transfəˈmeɪʃ(ə)n kəːv/ křivka přeměny change in solubility limit změna rozpustnosti koncentrace tavenina /ˌmɛtəˈsteɪb(ə)l ˈʌɪən ˈʌɪən metastabilní soustava ˈkɑːbʌɪd ˈsɪstəm/ železo-karbid železa /ˈpəːlʌɪt/ perlit Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Heat Treatment of Metals Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s tepelným zpracováním kovů. jazykový – Listening skills Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 23 YEAR: 3 Heat Treatment of Metals SUBJECT: Technology 23. Heat Treatment of Metals Exercise 1 Click on the link below to watch the video ‘The Steel Heat Treatment Process’ (10:00) and answer these questions. 1. What happens when the object is heated? 2. What is steel? What does it consist of? 3. What is the critical temperature of steel when its crystalline structure changes from pearlite into austenite? 4. What tools do blacksmith use to make a knife? 5. Is it important for blacksmith to work quickly? Why/Why not? 6. What happens to the steel if you keep reheating it? 7. What test is used to find out if the crystal structure composition of the steel is in the critical temperature? 8. What is annealing? 9. What methods of annealing are presented? 10. What process must be done to recrystallize the steel to toughen it up? The video shows a general overview of the process in which a block of steel is transformed into a knife by literally reconfiguring the molecular and crystalline structure of the once rigid metal https://www.youtube.com/watch?v=98lh5Q0M0cg Key 1 1 Its atoms expand and become less stable. 2 An alloy. Iron and carbon. 3 700°C. 4 A box tongs, a German style round faced hammer, a flat faced hammer. 5 Yes. The steel quickly cools down. 6 The steel weakens each time it is reheated. 7 Magnetic test. By touching it against the magnet. If it sticks, the steel has the pearlite crystalline structure because of its magnetic field. 8 A process to cool down the steel. 9 Cooling by sand, water, oil. 10 Tempering Dictionary English Pronunciation Czech annealing /əˈniːlɪŋ/ žíhání annealing and tempering /əˈniːlɪŋ ənd ˈtɛmpərɪŋ/ zušlechťování (kalení a popouštění) carburizing /ˈkɑːbjʊrʌɪzɪŋ/ cementování change of structure /tʃeɪn(d)ʒ ɒf ˈstrʌktʃə/ změna struktury change of internal structure /tʃeɪn(d)ʒ ɒf ɪnˈtəːn(ə)l ˈstrʌktʃə/ změna vnitřní stavby cooling /ˈkuːlɪŋ/ ochlazování diagram /ˈdʌɪəɡram/ diagram diffusion /dɪˈfjuːʒ(ə)n/ difúze equilibrium state /ˌiːkwɪˈlɪbrɪəm steɪt/ rovnovážný stav hardening, quenching /ˈhɑːrdnɪŋ/, /kwɛn(t)ʃɪŋ/ kalení heat treatment /hiːt ˈtriːtm(ə)nt/ tepelné zpracování heating /ˈhiːtɪŋ/ ohřev mechanical properties /mɪˈkanɪk(ə)l ˈprɒpətiːz/ mechanické vlastnosti nitriding /ˈnʌɪtrʌɪdɪŋ/ nitridování property /prɒpəti/ vlastnost required properties /rɪˈkwʌɪəd ˈprɒpətiːz/ požadované vlastnosti temperature /ˈtɛmp(ə)rətʃə/ teplota thermal arrest /ˈθəːm(ə)l əˈrɛst/ výdrž (na teplotě) thermochemical treatment /ˌθɜːrməʊˈkemɪkəl ˈtriːtm(ə)nt/ chemicko-tepelné zpracování technological properties /tɛknəˈlɒdʒɪk(ə)l ˈprɒpətiːz/ technologické vlastnosti tempering /ˈtɛmpərɪŋ/ popouštění time /tʌɪm/ čas Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Structure of Steel in Slow Heating Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s tepelným zpracováním kovů. jazykový – Vocabulary, listening skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 24 Structure of Steel in Slow Heating SUBJECT: Technology 24. Structure of Steel in Slow Heating Exercise 1 Label the diagram with the words from the box. a) carbon content % austenite b) temperature °C e) cementite Obrázek 4 Iron-carbon phase diagram, (steel portion) 5 Vlastní dílo f) perlite 5 c) ferrite d) If the temperature of the steel rises from the room temperature over 723°C, its structure changes. The reason is the change of internal energy and the change of the crystalline structure. Exercise 2 Click on the link below and watch the video ‘Steel and America – Donald Duck Makes Iron’ (4:19). Find out why steel is so special. https://www.youtube.com/watch?v=68xYjUvJjMs&list=PL7F50B0000 6D3D867 Key 1 1 b, 2 a, 3 c f, 4 f e, 5 f, 6 c, 7 d c, 8 d e, 9 d Dictionary English Pronunciation Czech austenite /ˈɒstɪnʌɪt/ austenit boundary /ˈbaʊnd(ə)ri/ hranice (zrna) changes of crystal lattice /tʃeɪn(d)ʒɪz ɒf ˈkrɪst(ə)l ˈlatɪs/ změny krystalové mřížky cementite /sɪˈmɛntʌɪt/ cementit cementite decomposition /sɪˈmɛntʌɪt ˌdiːkɒmpəˈzɪʃn/ rozpad cementitu crystal lattice /ˈkrɪst(ə)l ˈlatɪs/ krystalová mřížka decomposition / ˌdiːkɒmpəˈzɪʃn/ rozpad ferrite /ˈfɛrʌɪt/ ferit grain /ɡreɪn/ zrno grain boundaries /ɡreɪn ˈbaʊnd(ə)riːz/ hranice zrn heating /ˈhiːtɪŋ/ ohřev pearlite /ˈpəːlʌɪt/ perlit pure /pjʊə/ čistý pure austenite /pjʊə ˈɒstɪnʌɪt/ čistý austenit slow heating /sləʊ ˈhiːtɪŋ/ pomalý ohřev steel /stiːl/ ocel structure /ˈstrʌktʃə/ struktura transformation /transfəˈmeɪʃ(ə)n/ přeměna Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Survey of Heat Treatment Methods Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s metodami tepelného zpracování. jazykový – vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 25 YEAR: 3 Survey of Heat Treatment Methods SUBJECT: Technology 25. Review of Heat Treatment Methods The purpose of heat treatment is mainly to achieve the desired mechanical and technological properties of metallic materials. Types of heat treatment: 1. Annealing (cooling is so slow that there is no hardening structure): a. without recrystallization - e.g. stress relief annealing, solft annealing, recrystallization annealing, anti-flaking annealing b. with recrystallization - e.g. homogenization annealing, normalizing, isometric, dissolving 2. Hardening (heating above recrystallization temperature and cooling is so rapid to form a hardening structure): a. martensitic hardening b. bainitic hardening 3. Tempering Types of chemical heat treatment: 1. Cementation (a surface saturation of steel by carbon) 2. Nitriding (a surface saturation of steel by nitrogen) 3. Carbonitriding Exercise 1 Match the English terms to the Czech. 1. Hardening a) normalizace 2. Annealing b) kalení ve vodě 3. Oil c) bainit 4. Air hardening d) olej 5. Heat treatment e) napoutění 6. Oil hardening f) kalení na vzduchu 7. Water hardening g) kalení v oleji 8. Bainite h) ochlazování v peci 9. Soft annealing i) zušlechťování 10. Tempering j) kalení 11. Bainite hardening k) popouštění 12. Normalization l) bainitické kalení 13. Chilling in the furnace m) žíhání na měkko 14. Soaking n) žíhání Key 1 1 j, 2 n, 3 d, 4 f, 5 i, 6 g, 7 b, 8 c, 9 m, 10 k, 11 l, 12 a, 13 h, 14 e Dictionary English Pronunciation Czech annealing /əˈniːlɪŋ/ žíhání annealing and tempering /əˈniːlɪŋ ənd ˈtɛmpərɪŋ/ zušlechťování (kalení a popouštění) carbonitriding /ˈkɑːbəʊˈnʌɪtrʌɪdɪŋ/ nitrocementování carburizing /ˈkɑːbjʊrʌɪzɪŋ/ cementování cooling /ˈkuːlɪŋ/ ochlazování cooling rate /ˈkuːlɪŋ reɪt/ rychlost ochlazování diagram /ˈdʌɪəɡram/ diagram hardening /ˈhɑːrdnɪŋ/ kalení heat treatment / hiːt ˈtriːtm(ə)nt/ tepelné zpracování heating /ˈhiːtɪŋ/ ohřev heating rate /ˈhiːtɪŋ reɪt/ rychlost ohřevu mechanical properties /mɪˈkanɪk(ə)l ˈprɒpətiːz/ mechanické vlastnosti nitriding / ˈnʌɪtrʌɪdɪŋ/ nitridování property /ˈprɒpəti/ vlastnost rapid cooling /ˈrapɪd ˈkuːlɪŋ/ rychlé ochlazování recrystallization /riːˈkrɪst(ə)lʌɪzeɪʃ(ə)n/ rekrystalizace slow cooling /sləʊ ˈkuːlɪŋ/ pomalé ochlazování temperature /ˈtɛmp(ə)rətʃə/ teplota thermal arrest /ˈθəːm(ə)l əˈrɛst/ výdrž (na teplotě) thermochemical treatment /ˌθɜːrməʊˈkemɪkəl ˈtriːtm(ə)nt/ chemicko-tepelné zpracování technological properties /tɛknəˈlɒdʒɪk(ə)l ˈprɒpətiːz/ technologické vlastnosti tempering / ˈtɛmpərɪŋ/ popouštění time /tʌɪm/ čas Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Diagrams of Austenite Decomposition Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s diagramy rozpadu austenitu. jazykový – Making questions, reading Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 26 Diagrams of Austenite Decomposition SUBJECT: Technology 26. Austenite Disintegration Diagrams Exercise 1 Put the words to the correct order to make questions 1-4. critical temperature for is (°C) austenite existence What of 1 ______________________________________________________? origin ‘austenite’ of is term What the the 2 ______________________________________________________? austenite 1OOO °F in exist temperature Does 3 ______________________________________________________? have element alloying Does austenite an 4 ______________________________________________________? Exercise 1 Read the text below and answer the questions in 1. Austenite, also known as gamma-phase iron (γ-Fe), is a metallic, nonmagnetic allotrope of iron or a solid solution of iron, with an alloying element. In plain-carbon steel, austenite exists above the critical eutectoid temperature of 1,000 K (1,340 °F; 730 °C); other alloys of steel have different eutectoid temperatures. It is named after Sir William Chandler Roberts-Austen (1843–1902). 6 6 Austenite. Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Austenite. Key 1 1 What temperature (°C) is critical for existence of austenite? 2 What is the origin of the term ‘austenite’? 3 Does austenite exist in temperature 1OOO °F? 4 Does austenite have an alloying element? 2 1 It is 730°C, 2 It is named after Roberts-Austen. 3 No, it doesn’t. 4 Yes, it does. Dictionary English Pronunciation Czech - isothermal transformation diagram Time-TemperatureTransformation diagram TTT diagram anisothermal decomposition of austenite -/ ˈʌɪsə(ʊ)θəːm(ə)l ˌdiːkɒmpəˈzɪʃn əv ˈɒstɪnʌɪt/ anizotermický rozpad austenitu austenite / ˈɒstɪnʌɪt/ austenit bainite /ˈbeiːnʌɪt/ bainit C curve nose /siː kəːv nəʊz/ nos křivky (diagramu IRA) continuous cooling /kənˈtɪnjʊəs ˈkuːlɪŋ/ plynulé ochlazování CTT diagram (Continuous Cooling Transformation diagram) /siː tiː tiː ˈdʌɪəɡram/ /kənˈtɪnjʊəs ˈkuːlɪŋ transfəˈmeɪʃ(ə)n ˈdʌɪəɡram/ diagram ARA curve /kəːv/ křivka decomposition / ˌdiːkɒmpəˈzɪʃn/ rozpad decomposition curve / ˌdiːkɒmpəˈzɪʃn kəːv/ křivka rozpadu eutectoid /juːˈtɛktɔɪd/ eutektoid / ˈʌɪsə(ʊ)θəːm(ə)l ˌdiːkɒmpəˈzɪʃn əv ˈɒstɪnʌɪt/ izotermický rozpad austenitu logarithmic scale /ˌlɒɡəˈrɪðmɪk skeɪl/ logaritmická stupnice martensite /ˈmɑːtɪnzʌɪt/ martenzit pearlite /ˈpəːlʌɪt/ perlit solid solution /ˈsɒlɪd səˈluːʃ(ə)n/ tuhý roztok structure /ˈstrʌktʃə/ struktura transformation / transfəˈmeɪʃ(ə)n/ přeměna transformation finish / transfəˈmeɪʃ(ə)n ˈfɪnɪʃ/ konec přeměny transformation start / transfəˈmeɪʃ(ə)n stɑːt/ počátek přeměny isothermal decomposition of austenite transfəˈmeɪʃ(ə)n ˈdʌɪəɡram/ diagram IRA /tʌɪm ˈtɛmp(ə)rətʃə transfəˈmeɪʃ(ə)n ˈdʌɪəɡram/ /tiː tiː tiː ˈdʌɪəɡram/ /ənʌɪsə(ʊ)θəːm(ə)l Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Annealing Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s žíháním. jazykový – Verb forms Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 27 Annealing SUBJECT: Technology 27. Annealing Exercise 1 Complete the text with the correct form of the verbs in the brackets. Annealing 1________ (be) a heat process whereby a metal is 2________ (heat) to a specific temperature or colour and then allowed to 3________ (cool) slowly. This 4________ (soften) the metal which 5________ (mean) it can 6________ (be) cut and shaped more easily. Mild steel, is heated to a red heat and allowed to cool slowly. However, metals such as aluminium will 7________ (melt) if heated for too long. Annealed metals 8________ (be) relatively soft and can be cut and shaped more easily. They 9________ (bend) easily when pressure is applied. As a rule they 10________ (be) heated and allowed to cool slowly.7 7 Annealing metals. Technologystudent [online]. 2009 [cit. 2015-05-04]. Dostupné z: https://en.wikipedia.org/wiki/Bending_(metalworking). Key 1 1 is, 2 heated, 3 cool, 4 softens, 5 means, 6 be, 7 melt, 8 are, 9 bend, 10 are Dictionary English Pronunciation Czech annealing /əˈniːlɪŋ/ žíhání annealing temperature /əˈniːlɪŋ ˈtɛmp(ə)rətʃə/ teplota žíhání bend /bɛnd/ ohýbat cooling /ˈkuːlɪŋ/ ochlazování cooling rate /ˈkuːlɪŋ reɪt/ rychlost ochlazování heating / ˈhiːtɪŋ/ ohřev heating rate / ˈhiːtɪŋ reɪt/ rychlost ohřevu homogenization /həmɒdʒənʌɪˈzeɪʃ(ə)n/ homogenizační žíhání isothermal annealing /ˈʌɪsə(ʊ)θəːməl əˈniːlɪŋ/ izotermické žíhání melt /mɛlt/ tavit normalizing /ˈnɔːm(ə)lʌɪzɪŋ/ normalizační žíhání recrystallization /riːˈkrɪst(ə)lʌɪzeɪʃ(ə)n/ rekrystalizace recrystallization annealing /riːˈkrɪst(ə)lʌɪzeɪʃ(ə)n əˈniːlɪŋ/ rekrystalizační žíhání slow cooling /sləʊ ˈkuːlɪŋ/ pomalé ochlazování soft annealing /sɒft əˈniːlɪŋ/ žíhání na měkko spheroidise annealing /ˈsfɪərɔɪdʌɪz əˈniːlɪŋ/ sferoidizační žíhání stress relief annealing /strɛs rɪˈliːf əˈniːlɪŋ/ žíhání na odstranění pnutí temperature /ˈtɛmp(ə)rətʃə/ teplota temperature range /ˈtɛmp(ə)rətʃə reɪn(d)ʒ/ rozsah teplot thermal arrest /ˈθəːm(ə)l əˈrɛst/ výdrž (na teplotě) time /tʌɪm/ čas Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Quenching Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s kalením. jazykový – Listening skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 28 Quenching SUBJECT: Technology 28. Quenching Exercise 1 Click no the link below to watch the video ‘Water Quenching’ (2:03). Circle T for true statement and F for false. T F The large piece of stainless steel is heated in the high heat furnace. 1. T F In this example the temperature in the furnace is at 1950°C. 2. T F When the part is removed from the furnace, the quenching can proceed slowly. 3. T F Finally the part is dropped into the quenching tank. https://www.youtube.com/watch?v=gPKkgmDoEoU Key 1 1 T, 2 No. At °F, 3 No. Quickly. 4 T Dictionary English Pronunciation Czech air hardening /ɛː ˈhɑːd(ə)nɪŋ/ kalení na vzduchu bainitic hardening /ˈbeiːnɪtɪk ˈhɑːd(ə)nɪŋ/ bainitické kalení bainite /ˈbeiːnʌɪt/ bainit cooling /ˈkuːlɪŋ/ ochlazování cooling rate /ˈkuːlɪŋ reɪt/ rychlost ochlazování furnace /ˈfəːnɪs/ pec hardening / ˈhɑːd(ə)nɪŋ/ kalení hardenability /hɑːd(ə)nəˈbɪlɪti/ prokalitelnost heating / ˈhiːtɪŋ/ ohřev heating rate / ˈhiːtɪŋ reɪt/ rychlost ohřevu heating time / ˈhiːtɪŋ tʌɪm/ doba ohřevu hardening structure / ˈhɑːd(ə)nɪŋ ˈstrʌktʃə/ zákalná struktura isothermal hardening, austempering martempering, marquenching, stepped quenching / ˈʌɪsə(ʊ)θəːməlˈ ˈhɑːd(ə)nɪŋ /ˈmɑːtɛmpərɪŋ/, /ˈmɑː kwɛn(t)ʃɪŋ/, /stɛpt kwɛn(t)ʃɪŋ/ přerušované kalení martensite / ˈmɑːtɪnzʌɪt/ martenzit martensitic transformation /ˈmɑːtɪnzɪtɪk transfəˈmeɪʃ(ə)n martenzitická přeměna oil hardening /ɔɪl ˈhɑːd(ə)nɪŋ/ kalení do oleje quenching /kwɛn(t)ʃɪŋ/ rychlé ochlazení (při kalení) quenching medium /kwɛn(t)ʃɪŋ ˈmiːdɪəm/ kalicí médium rapid cooling /ˈrapɪd ˈkuːlɪŋ/ rychlé ochlazování soaking /ˈsəʊkɪŋ/ prohřátí, vyrovnání teplot thermal arrest /ˈθəːm(ə)l əˈrɛst/ výdrž (na teplotě) time /tʌɪm/ čas water hardening ˈhɑːd(ə)nɪŋ/ kalení do vody /, /ˈɒstɛmpərɪŋ/ izotermické kalení Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Thermochemical Treatment Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s chemicko-tepelným zpracováním. jazykový – Adjectives, comparatives, reading Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 29 YEAR: 3 SUBJECT: Technology Thermochemical Treatment 29. Thermochemical Treatment Exercise 1 Complete the text with the words from the box. hard tough longer harder soft higher Carburizing is a heat treatment process in which iron or steel absorbs carbon liberated when the metal is heated. The intent is to make the metal 1_____________. 2_____________ carburizing times and 3_____________ temperatures typically increase the depth of carbon diffusion. When the iron or steel is cooled rapidly by quenching, the higher carbon content on via transformation 4_____________ martensite, while the the core the outer remains surface from austenite 5_____________ 6_____________ as a ferritic and pearlite microstructure. 8 8 becomes Carburizing. Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Carburizing. to and Nitriding is a heat treating process that diffuses nitrogen into the surface of a metal to create a case-hardened surface. These processes are most commonly used on low-carbon, low-alloy steels. However, they are also used on medium and high-carbon steels, titanium, aluminium and molybdenum. Typical applications include gears, valve parts, extruder screws, die-casting tools, forging dies, extrusion dies, firearm components, injectors and plastic-mold tools. 9 Key 1 1 harder, 2 longer, 3 higher, 4 hard, 5 soft, 6 tough 9 Nitriding. Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Nitriding. Dictionary English Pronunciation Czech carbon /ˈkɑːb(ə)n/ uhlík carbonitriding /ˈkɑːb(ə)ˈnʌɪtrʌɪdɪŋ/ nitrocementování carburizing / ˈkɑːbjʊrʌɪzɪŋ/ cementování hardness /ˈhɑːdnəs/ tvrdost iron /ˈʌɪən/ železo nitriding / ˈnʌɪtrʌɪdɪŋ/ nitridování nitrogen / ˈnʌɪtrədʒ(ə)n/ dusík quenching /kwɛn(t)ʃɪŋ/ rychlé ochlazení (při kalení) steel /stiːl/ ocel thermochemical treatment /ˌθɜːrməʊˈkemɪkəl ˈtriːtm(ə)nt/ chemicko-tepelné zpracování wear resistance / wɛː rɪˈzɪst(ə)ns/ odolnost proti opotřebení Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Regions of Annealing Temperatures Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s oblastmi žíhacích teplot. jazykový – Vocabulary, reading Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 30 SUBJECT: Technology Regions of Annealing Temperatures 30. Fields of Annealing Temperature Exercise 1 Label the diagram with the words from the box. carbon (%) temperature (°C) Obrázek 5 Fields of annealing temperature in equilibrium diagram Fe-Fe3C 10 Vlastní dílo 10 Annealing: a - to reduce stress d - homogenization b - recrystallization c - softened e - normalizing Exercise 2 Label the diagram with the words from the box. 1. Where the steel should be cooled? 2. Is annealing fast process? Annealing process consists of heating the steel to the proper temperature and then slowly cooling it through the transformation range preferably in the furnace or in any good heat-insulating material. The slow cooling is generally continued to low temperatures. The annealing is a very slow cooling process and therefore comes closest to following the iron-iron carbide equilibrium diagram. Annealing is carried out to refine grains, induce softness, improve electrical/magnetic properties and improve machinability. 11 11 Heat Treatment of Steel. Practical Maintenance [online]. 2015 [cit. 2015-03-04]. Dostupné z: http://practicalmaintenance.net/?p=1329. Key 1 1 temperature (°C), 2 carbon (%) 2 1 In the furnace. 2 No, it isn’t. Dictionary English Pronunciation Czech annealing /əˈniːlɪŋ/ žíhání annealing temperature /əˈniːlɪŋ ˈtɛmp(ə)rətʃə/ teplota žíhání heating / ˈhiːtɪŋ/ ohřev homogenization /həmɒdʒənʌɪˈzeɪʃ(ə)n/ homogenizační žíhání iron-iron carbide equilibrium diagram /ˈʌɪən ˈʌɪən ˈkɑːbʌɪd rovnovážný diagram equilibrium ˈdʌɪəɡram/ železo-karbid železa isothermal annealing /ˈʌɪsə(ʊ)θəːməl əˈniːlɪŋ/ izotermické žíhání normalizing /ˈnɔːm(ə)lʌɪzɪŋ/ normalizační žíhání recrystallization annealing /riːˈkrɪst(ə)lʌɪzeɪʃ(ə)n əˈniːlɪŋ/ rekrystalizační žíhání soft annealing /sɒft əˈniːlɪŋ/ žíhání na měkko spheroidise annealing /ˈsfɪərɔɪdʌɪz əˈniːlɪŋ sferoidizační žíhání stress relief annealing /strɛs rɪˈliːf əˈniːlɪŋ/ žíhání na odstranění pnutí temperature /ˈtɛmp(ə)rətʃə/ teplota temperature range / ˈtɛmp(ə)rətʃə reɪn(d)ʒ/ rozsah teplot Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Heat Treatment of Tool Steels Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s tepelným zpracováním nástrojových ocelí. jazykový – Vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 31 YEAR: 3 Heat Treatment of Tool Steels SUBJECT: Technology 31. Heat Treatment of Tool Steel Exercise 1 Label the diagram with the words below. Use word list. Obrázek 6 The heat treatment timing diagram of tool steel 12 __ Heating __ Tempering __ Finishing machining __ Hardening __ Warm bath __ Air __ Temperature __ Quenching __ Rough machining __ Stress relief annealing __ Oil __ Stamina to hardening temperature __ Time __ Preheating temperature __ Water __ Equalizing 12 Vlastní dílo Key 1 1 Temperature, 2 Time, 3 Rough machining, 4 Stress relief annealing, 5 Finishing machining, 6 Heating, 7 Hardening, 8 Quenching, 9 Tempering, 10 Preheating temperature, 11 Stamina to hardening temperature, 12 Air, 13 Water, 14 Oil, 15 Equalizing Dictionary English Pronunciation Czech air /ɛː/ vzduch annealing /əˈniːlɪŋ/ žíhání hardening /ˈhɑːrdnɪŋ/ kalení heat treatment / hiːt ˈtriːtm(ə)nt/ tepelné zpracování heating /ˈhiːtɪŋ/ ohřev oil /ɔɪl/ olej preheating /priːˈhiːtɪŋ/ předehřev preheating temperature /priːˈhiːtɪŋ ˈtɛmp(ə)rətʃə/ předehřívací teplota soaking /ˈsəʊkɪŋ/ prohřátí, vyrovnání teplot stress relief annealing /strɛs rɪˈliːf əˈniːlɪŋ/ žíhání na odstranění pnutí temperature / ˈtɛmp(ə)rətʃə/ teplota warm bath /wɔːm bɑːθ/ teplá lázeň water /ˈwɔːtə/ voda tempering / ˈtɛmpərɪŋ/ popouštění thermal arrest at hardening temperature /ˈθəːm(ə)l əˈrɛst ət ˈhɑːrdnɪŋ ˈtɛmp(ə)rətʃə/ výdrž na kalicí teplotě time /tʌɪm/ čas tool steel /tuːl stiːl/ nástrojová ocel Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Process of Carburizing Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s postupem cementování. jazykový – Vocabulary, present continuous Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 32 YEAR: 3 Process of Carburizing SUBJECT: Technology 32. Process of Cementation Cementation is a surface saturation of steel (with low carbon content) by carbon for subsequent hardening.In this way it is possible to create hardened surface at the components of structural tough steel. Heat treatment of steels for cementation (with a carbon content of 0,1 to 0,2%) consists of several steps: normalizing cementation – surface carburizing hardening and tempering It is necessary to increase the carbon content in the surface layer to 0,6 to 0,8% by cementation, to allow hardening to martensite. Process of cementation At the beginning there is an unhardened steel product ready for cementation. First the method of carburization must be chosen: pack carburizing, fluid case-hardening, gas case-hardening, Then we use hardening and tempering: after heating to hardening temperature, box quenching, quenching, The product with hardened surface has carburized hardened skin and unhardened core. Exercise 1 Find 12 words from the text above in this puzzle. The direction of the words can be up, down or forward. Key 1 quenching, hardening, tempering, carburizing, cementation, normalizing, heat treatment, saturation, carbon, component, surface, martensite. Dictionary English Pronunciation carbon /ˈkɑːbən/ carburized depth, case depth /ˈkɑːbjʊrʌɪzd dɛpθ/, /keɪs dɛpθ/ /ˈkɑːbjʊrʌɪzɪŋ/, /keɪs ˈhɑːd(ə)nɪŋ/ carburizing, case-hardening Czech uhlík hloubka cementování cementování diffusion /dɪˈfjuːʒ(ə)n/ difúze fluid case-hardening /ˈfluːɪd keɪs ˈhɑːd(ə)nɪŋ/ cementování v kapalném prostředí gas case-hardening /gas keɪs ˈhɑːd(ə)nɪŋ/ cementování v plynu hard surface /hɑːd ˈsəːfɪs/ tvrdý povrch hardening /ˈhɑːd(ə)nɪŋ / kalení hardness /ˈhɑːdnəs/ tvrdost low-carbon steel /ləʊ ˈkɑːbən stiːl/ nízkouhlíková ocel pack carburizing /pak ˈkɑːbjʊrʌɪzɪŋ/ cementování v prášku saturation /satʃəˈreɪʃ(ə)n/ nasycování tempering /ˈtɛmpərɪŋ/ popouštění thermochemical treatment /ˌθɜːrməʊˈkemɪkəl ˈtriːtm(ə)nt/ chemicko-tepelné zpracování wear resistance /wɛː rɪˈzɪst(ə)ns/ odolnost proti opotřebení Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Hardening - Surface Hardening Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s vytvrzováním povrchovým kalením. jazykový – Vocabulary, present continuous Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 33 YEAR: 3 SUBJECT: Hardening - Surface Hardening Technology 33. Hardening - Surface Hardening Exercise 1 Label the diagram with the words from the box. a) Burner flames b) Cooling water inlet c) Hardened surface d) Flammable gas inlet e) Red hot layer f) Water spray g) Hardened layer – surface h) Feed hardening of individual areas by FLAME HARDENING intense flame and water spray. 13 Obrázek 7 Flame hardening 13 Vlastní dílo Exercise 2 Click on the link below to watch the video ‘Hardening of small pin’ (0:55). Use vocabulary from the word list and describe the action in the video. Use present continuous. INDUCTION HARDENING - surface hardening of rotating parts by induction coil and water spray. Induction coil (water-cooled) High-frequency electric current Unhardened pin Water spray Hardened shaft Heated surface zone Cooling water inlet Feed http://www.youtube.com/watch?v=Dp604A3CmkA Key 1 1 b, 2 d, 3 h, 4 f, 5 a, 6 g, 7 e 2 Student’s own answers Dictionary English Pronunciation Czech burner /ˈbəːnə/ hořák cooling water /ˈkuːlɪŋ ˈwɔːtə/ chladicí voda flame /fleɪm / plamen flame hardening /fleɪm ˈhɑːrdnɪŋ / kalení plamenem flammable gas /ˈflaməb(ə)l ɡas / hořlavý plyn immersion /ɪˈməːʃ(ə)n / ponoření inlet /ˈɪnlɛt/ přívod hardened surface /ˈhɑːdənd ˈsəːfɪs/ kalená plocha hardened layer /ˈhɑːdənd ˈleɪə/ zakalená vrstva hardening / ˈhɑːrdnɪŋ/ vytvrzování induction coil /ɪnˈdʌkʃ(ə)n kɔɪl/ indukční cívka induction hardening /ɪnˈdʌkʃ(ə)n ˈhɑːd(ə)nɪŋ/ indukční kalení induction heating /ɪnˈdʌkʃ(ə)n ˈhiːtɪŋ/ indukční ohřev quench /kwɛn(t)ʃ / zakalit quenching liquid /kwɛn(t)ʃɪŋ ˈlɪkwɪd/ kalicí tekutina water spray / ˈwɔːtə spreɪ/ vodní sprcha surface hardening case hardening / ˈsəːfɪs ˈhɑːd(ə)nɪŋ/ /keɪs ˈhɑːd(ə)nɪŋ/ povrchové kalení work coil /wəːk kɔɪl/ pracovní cívka Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Theory of Forming - Basic Terms Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se základními pojmy teorie tváření. jazykový – Reading and vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 34 Theory of Forming - Basic Terms SUBJECT: Technology 34. Forming Theory – Basic Terms Exercise 1 Search for 10 words from the text below. The direction of the words can be forward, up or down. Forming, or metal forming, is the metalworking process of fashioning metal parts and objects through mechanical deformation. The workpiece is reshaped without adding or removing material, and its mass remains unchanged. 14 While forming the work piece is reshaped by external forces without disturbing the integrity of the material. 14 Forming (metalworking). Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Forming_(metalworking). Material particles are only permanently relocating – the material is plastic. This occurs in metals when the stress reaches the yield point. Metal resists against the continued plastic deformation – it reinforces. Key 1 Forming, metalworking, metal, deformation, force, material, particles, stress, process, workpiece. Dictionary English Pronunciation Czech aluminium alloy / al(j)ʊˈmɪnɪəm ˈalɔɪ/ hliníková slitina elongation /iːlɒŋˈɡeɪʃ(ə)n/ prodloužení forming /fɔːmɪŋ/ tváření high-grade steel / hʌɪ grade steel/ ušlechtilá ocel metal forming / ˈmɛt(ə)l fɔːmɪŋ/ tváření kovů particle / ˈpɑːtɪk(ə)l/ částice permanent / ˈpəːm(ə)nənt/ trvalý plastic deformation /ˈplastɪk ˌdiːfɔːˈmeɪʃ(ə)n/ plastická deformace resist / rɪˈzɪst/ odolávat, klást odpor shape /ʃeɪp/ tvar strengthening / ˈstrɛŋθ(ə)nɪŋ/ zpevnění stress /strɛs/ napětí strain, deformation /streɪn/, / ˌdiːfɔːˈmeɪʃ(ə)n/ deformace stress-strain diagram /strɛs streɪn ˈdʌɪəɡram/ pracovní diagram tensile strength / ˈtɛnsʌɪl ˈstrɛŋθ/ pevnost v tahu tensile test / ˈtɛnsʌɪl tɛst/ zkouška pevnosti v tahu unalloyed structural steel / ʌnəˈlɔɪd ˈstrʌktʃ(ə)r(ə)l stiːl/ nelegovaná konstrukční ocel workpiece, work piece /ˈwəːkpiːs/ výrobek yield strength /jiːld strɛŋθ/ mez kluzu yield point / jiːld pɔɪnt/ mez kluzu Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Theory of Forming - Basic Principles and Variables Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se základními zákony a veličinami tváření. jazykový – Questions Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 35 YEAR: 3 Theory of Forming - Basic Principles and Variables SUBJECT: Technology 35. Theory of Forming - Basic Principles and Variables Exercise 1 Make questions from these sentences. Law of constancy of volume means the volume of a stock before forming equals the volume of it after forming. 1_______________________________________________________ _______________________________________________________? The strain rate for any particular manufacturing metal forming process is directly related to the speed at which deformation is occurring. 2_______________________________________________________ _______________________________________________________? A greater rate of deformation of the work piece will mean a higher strain rate. 3_______________________________________________________ _______________________________________________________? Strain rate will affect the amount of flow stress.15 4______________________________________________________? 15 Metal forming. The library of manufacturing [online]. 2015 [cit. 2015-06-04]. Dostupné z: http://thelibraryofmanufacturing.com/forming_basics.html. Key 1 Sample answers: 1 What does the law of constancy of volume mean? 2 What is the strain rate related to? 3 What will a greater rate of deformation of the work piece mean? 4 Will strain rate affect the amount of flow stress? Dictionary English Pronunciation Czech bulk forming / bʌlk fɔːmɪŋ/ tváření objemové deformation, strain /ˌdiːfɔːˈmeɪʃ(ə)n/, /streɪn/ deformace deformation force / ˌdiːfɔːˈmeɪʃ(ə)n fɔːs/ přetvárná síla deformation work / ˌdiːfɔːˈmeɪʃ(ə)n wəːk/ přetvárná práce degree of deformation /dɪˈɡriː ɒf ˌdiːfɔːˈmeɪʃ(ə)n/ stupeň deformace flow stress / fləʊ strɛs/ přetvárný odpor forming / fɔːmɪŋ/ tváření law /lɔː/ zákon law of least resistance /lɔː ɒv liːst rɪˈzɪst(ə)ns/ zákon nejmenšího odporu law of volume constancy /lɔː ɒv ˈvɒljuːm ˈkɒnst(ə)nsi/ zákon stálosti objemů mechanical property /mɪˈkanɪk(ə)l ˈprɒpəti/ mechanická vlastnost permanent deformation, /ˈpəːm(ə)nənt ˌdiːfɔːˈmeɪʃ(ə)n/, trvalá deformace /nɒn ɪˈlastɪk streɪn/ non-elastic strain sheet forming / ʃiːt fɔːmɪŋ/ tváření plošné strain rate, deformation / streɪn reɪt/, / ˌdiːfɔːˈmeɪʃ(ə)n přetvárná rychlost reɪt/ rate variable /ˈvɛːrɪəb(ə)l/ veličina Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Theory of Forming - Influence of Temperature on Plastic Deformation Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s vlivem teploty na plastickou deformaci. jazykový – Reading, comparatives, superlatives Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 36 Theory of Forming - Influence of Temperature on Plastic Deformation SUBJECT: Technology 36. Theory of Forming - Influence of Temperature on Plastic Deformation Exercise 1 Read the text below and answer these questions. 1. Which two metal forming processes are carried out below the recrystallization temperature of the metal? 2. Which metal forming process require the greatest force to shape a part? 3. Which metal forming process require the highest amount of energy? Cold forming is a metal forming that is carried out at room temperature or little above it. In cold working, plastic deformation of the work causes strain hardening. The force required to shape a part is greater in cold working than for warm or hot working. The total amount of energy expended is much lower in cold working than in hot working. Warm forming is a metal forming process carried out above temperature range of cold working, but below the recrystallization temperature of the metal. It reduces the force required to perform the operation. Hot forming is a metal forming process that is carried out at a temperature range that is higher than the recrystallization temperature of the metal being formed. The heating of parts reduces tool life, results in a lower productivity, and a higher energy requirement than in cold working.16 16 Metal forming. The library of manufacturing [online]. 2015 [cit. 2015-06-04]. Dostupné z: http://thelibraryofmanufacturing.com/forming_basics.html. Key 1 1 Cold forming and warm forming. 2 Cold forming. 3 Hot forming. Dictionary English Pronunciation Czech brittleness /ˈbrɪt(ə)lnɛs/ křehkost burn-off / bəːn ɒf/ opal cold forming /kəʊld fɔːmɪŋ/ tváření za studena crystallization / krɪst(ə)lʌɪ ˈzeɪʃ(ə)n/ krystalizace deformation resistance / ˌdiːfɔːˈmeɪʃ(ə)n rɪˈzɪst(ə)ns/ odpor proti deformaci ductility / dʌkˈtɪlɪti/ tažnost forming / fɔːmɪŋ/ tváření hardness / ˈhɑːdnəs/ tvrdost hot forming /hɒt fɔːmɪŋ/ tváření za tepla internal stress / ɪnˈtəːn(ə)l strɛs/ vnitřní pnutí notch ductility / nɒtʃ dʌkˈtɪlɪti/ vrubová houževnatost plastic deformation / ˈplastɪk ˌdiːfɔːˈmeɪʃ(ə)n/ plastická deformace recovery / rɪˈkʌv(ə)ri/ zotavení /riːkrɪst(ə)lʌɪˈzeɪʃ(ə)n/ recrystallization, structural /ˈstrʌktʃ(ə)r(ə)l transformation překrystalizace recrystallization, crystalline transformation rekrystalizace recrystallization temperature transfəˈmeɪʃ(ə)n/ /riːkrɪst(ə)lʌɪˈzeɪʃ(ə)n/ /ˈkrɪst(ə)lʌɪn transfəˈmeɪʃ(ə)n/ /riːkrɪst(ə)lʌɪˈzeɪʃ(ə)n ˈtɛmp(ə)rətʃə/ scale / skeɪl/ strain hardening, hardening work /streɪn ˈhɑːrdnɪŋ/, ˈhɑːrdnɪŋ/ rekrystalizační teplota okuje /wəːk deformační zpevnění strength / strɛŋθ/ pevnost temperature /ˈtɛmp(ə)rətʃə/ teplota texture / ˈtɛkstʃə/ textura yield strength / jiːld strɛŋθ/ mez kluzu Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Theory of Forming - Heating of Material, Heating Furnaces Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s ohřevem materiálu a ohřívacími pecemi. jazykový – Present simple, passives, should Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 37 YEAR: 3 SUBJECT: Theory of Forming - Heating of Technology Material, Heating Furnaces 37. Theory of Forming - Heating of Material, Heating Furnaces Exercise 1 Complete the text with the correct form of the verbs in the box. be (5x) ensure use depend should keep The basic premise of the correct hot forming 1________ to 2_________ the proper forming temperature. Heating of the material 3__________ therefore 4_________ done so as to 5__________ steady warming-through of the material in the entire section. The heating time needed to reach the forming temperature 6___________ on the heat balance of the furnace, the thermal conductivity of the material and its distribution in the furnace. According to the type of the heating there 7____________ gas-fired furnaces or electric furnaces. Induction heating 8____________ mainly 9____________ in series or mass production or automatic lines. The advantage 10__________ the purity, the heating rate and the ability to heat only a certain place of the part. Informative forming temperature of some metals and their alloys: Structural plain carbon steel 1280 - 700°C Structural alloy steel 1220 - 830°C Tool plain carbon steel 1000 - 800°C Tool alloy steel 1150 - 900°C Copper and its alloys 900 - 700°C Aluminium and its alloys 500 - 350°C Titanium and its alloys 900 - 800°C Key 1 1 is, 2 keep, 3 should, 4 be, 5 ensure, 6 depends, 7 are, 8 is, 9 used, 10 is Dictionary English Pronunciation Czech batch furnace /batʃ ˈfəːnɪs/ pec pro dávkové zpracování, komorová pec charge /tʃɑːdʒ/ vsázka continuous furnace / kənˈtɪnjʊəs ˈfəːnɪs/ průběžná pec cyclic furnace / ˈsʌɪklɪk ˈfəːnɪs/ cyklická pec electric furnace /ɪˈlɛktrɪk ˈfəːnɪs/ elektrická pec forming /fɔːmɪŋ/ tváření forming temperature /fɔːmɪŋ ˈtɛmp(ə)rətʃə/ teplota tváření furnace /ˈfəːnɪs/ pec gas furnace, furnace gas-fired / gas ˈfəːnɪs/, / gas faɪrd plynová pec ˈfəːnɪs/ heat /hiːt/ teplo heat distribution /hiːt dɪstrɪˈbjuːʃ(ə)n/ rozdělení tepla heat loss, loss of heat / hiːt lɒs/, / lɒs ɒf hiːt/ ztráta tepla, tepelná ztráta heat transfer / hiːt transˈfəː/ přenos tepla heating /ˈhiːtɪŋ/ ohřev heating furnace / ˈhiːtɪŋ ˈfəːnɪs/ ohřívací pec hot forming / hɒt fɔːmɪŋ/ tváření za tepla induction heating /ɪnˈdʌkʃ(ə)n ˈhiːtɪŋ/ indukční ohřev loss / lɒs/ ztráta operating temperature /ˈɑːpəreɪtɪŋ ˈtɛmp(ə)rətʃə/ provozní teplota thermal balance / ˈθəːm(ə)l ˈbal(ə)ns/ tepelná bilance thermal conductivity / ˈθəːm(ə)l kɒndʌkˈtɪvɪti/ tepelná vodivost thermal efficiency / ˈθəːm(ə)l ɪˈfɪʃ(ə)nsi/ tepelná účinnost Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Technology of Forming - Classification Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s rozdělením technologie tváření. jazykový – Reading skills, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 38 YEAR: 3 SUBJECT: Technology Technology of Forming Classification 38. Forming Technology Classification Exercise 1 Match the names of forming processes to the right definition. Indenting Rolling Recessing Forging Die forming Expanding Extrusion Stretching Forming processes tend to be typified by differences in effective stresses. These categories and descriptions are highly simplified. Compressive forming involves those processes where the primary means of plastic deformation is compressive loading. 1____________, where the material is passed through a pair of rollers. 2____________, where the material is pushed through an orifice. 3____________, where the material is stamped by a press around or onto a die. 4____________, where the material is shaped by localized compressive forces. 5____________, where a tool is pressed into the workpiece. Tensile forming involves those processes where the primary means of plastic deformation is tensile stress. 6____________, where a tensile load is applied along the longitudinal axis of the workpiece. 7____________, where the circumference of a hollow body is increased by tangential loading. 8____________, where depressions and holes are formed through tensile loading. Combined tensile and compressive forming involves those operations where the primary means of plastic deformation involves both tensile stresses and compressive loads. Pulling through a die Deep drawing Spinning Flange forming Upset bulging Bending This category of forming processes involves those operations where the primary means of plastic deformation is a bending load. Shearing This category of forming processes involves those operations where the primary means of plastic deformation is a shearing load. 17 17 Forming (metalworking). Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Forming_(metalworking). Key 1 1 Rolling, 2 Extrusion, 3 Die forming, 4 Forging, 5 Indenting, 6 Stretching, 7 Expanding, 8 Recessing Dictionary English Pronunciation Czech application of external forces /aplɪˈkeɪʃ(ə)n ɒf ɪkˈstəːn(ə)l působení vnějších sil fɔːsɪz/ bending / bendɪŋ/ ohýbání bulk forming / bʌlk fɔːmɪŋ/ tváření objemové classification /ˌklasɪfɪˈkeɪʃ(ə)n/ rozdělení classify / ˈklasɪfʌɪ/ rozdělit dle cold forming, cold working /kəʊld fɔːmɪŋ/, ˈwəːkɪŋ/ degree of deformation / dɪˈɡriː ɒf ˌdiːfɔːˈmeɪʃ(ə)n/ stupeň deformace drawing /ˈdrɔːɪŋ/ tažení elevated temperature /ˈɛlɪveɪtɪd ˈtɛmp(ə)rətʃə/ zvýšená teplota expanding /ɪkˈspandɪŋ/ rozšiřování extrusion / ɪkˈstruː ʒ(ə)n/ protlačování forging / fɔːdʒɪŋ/ kování forming / fɔːmɪŋ/ tváření hot forming, hot working /hɒt fɔːmɪŋ/, /hɒt ˈwəːkɪŋ/ tváření za tepla indenting /ɪnˈdɛntɪŋ/ vroubkování, značkování recrystallization temperature /riːˈkrɪst(ə)lʌɪ ˈzeɪʃ(ə)n ˈtɛmp(ə)rətʃə/ teplota rekrystalizace, rekrystalizační teplota rolling / ˈrəʊlɪŋ/ válcování room temperature /ruːm ˈtɛmp(ə)rətʃə/ pokojová teplota shearing / ʃɪəɪŋ/ stříhání sheet forming / ʃiːt ˈ fɔːmɪŋ/ tváření plošné temperature /ˈtɛmp(ə)rətʃə/ teplota thermal effect /ˈθəːm(ə)l ɪˈfɛkt/ tepelný efekt warm forming, working wire drawing /kəʊld warm / wɔːm ˈ fɔːmɪŋ/, / wɔːm ˈwəːkɪŋ/ / wʌɪə ˈdrɔːvɪŋ/ tváření za studena tváření za poloohřevu tažení drátů Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Rolling of Metals Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s válcováním kovů. jazykový – Reading and listening skills Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 39 YEAR: 3 Rolling of Metals SUBJECT: Technology 39. Forming Technology – Metal Rolling Exercise 1 box. Complete the text with the phrases from the a) Rolling of metal b) Sendzimir rolling mills d) Rolling train (mill train) c) Rolling mill stand e) Rolling 1________________________ is the most widely used deformation process. It consists of passing metal between two rollers, which exert compressive stresses, reducing the metal thickness. Where simple shapes are to be made in large quantity, rolling is the most economical process.18 2________________________ is metal forming by rotating mill rolls. The material is transforming and moving at the same time while passes the rolls. The hot rolling technology is used in heavy industry especially in metallurgy of iron and steel. 3________________________ is a forming machine or a bigger set intended for forming the material into a long product by pressure of opposing rollers. It is usually used for production of metal sheets, plates and rolled sections. Types of rolling mills according to the number of rolls: 18 Rolling. University of Cambridge [online]. 2015 [cit. 2015-06-19]. Dostupné z: http://www.doitpoms.ac.uk/tlplib/metal-forming-2/rolling.php. • Two-high rolling mill • Reversing rolling mill • Three-high rolling mill (Lauth mill with small middle roll) • Double two-high rolling mill 4________________________ are mills with 20 rolls. They have two working rolls and the others backing. Universal mills have besides rolls with horizontal axis also vertical rolls. 5________________________ is specialized technological machinery. The basic component of the rolling trains are always several rolling mill stands accompanied by many other transport and auxiliary machinery. Large rolling mills can be hundreds of meters long. Exercise 2 Click on the link below and watch this nice training video from the Corus BCSA training pack (2:45) and answer these questions. 1. Why is steel fed into a furnace? 2. What are the principles of hot rolling? 3. What are the rolls driven by? 4. What is used to control the rolling processes? https://www.youtube.com/watch?v=6xnKmt_gsLs Key 1 1 e, 2 a, 3 c, 4 b, 5 d 2 1 To make sure the steel is at the correct temperature for rolling. 2 Steel is squeezed between rolls until the final thickness and shape are achieved. 3 Powerful electric motors. 4 Computers. Dictionary English Pronunciation Czech bulk forming / bʌlk ˈfɔːmɪŋ/ tváření objemové cluster rolling mill / ˈklʌstə ˈrəʊlɪŋ mɪl/ šestiválcová stolice /sexto/ cold rolling / kəʊld ˈrəʊlɪŋ/ válcování za studena compressive force / kəmˈprɛsɪv fɔːs/ tlačná síla cross section / krɒs ˈsɛkʃ(ə)n/ průřez deformation /ˌdiːfɔːˈmeɪʃ(ə)n/ deformace flat rolling /flat ˈrəʊlɪŋ/ válcování plochých výrobků forming /ˈfɔːmɪŋ/ tváření four-high rolling mill / fɔː hʌɪ ˈrəʊlɪŋ mɪl/ čtyřválcová stolice /kvarto/ hot rolling / hɒt ˈrəʊlɪŋ/ válcování za tepla mill train /mɪl treɪn/ válcovací trať non-reversing mill /nɒn rɪˈvəːsɪŋ mɪl/ jednosměrná válcovací stolice reversing mill / rɪˈvəːsɪŋ mɪl/ vratná válcovací stolice roll / rəʊl/ válec rolling / ˈrəʊlɪŋ/ válcování rolling stand / ˈrəʊlɪŋ stand/ válcovací stolice shape rolling /ʃeɪp ˈrəʊlɪŋ/ válcování profilů three-high rolling mill / θriː hʌɪ ˈrəʊlɪŋ mɪl/ tříválcová stolice /trio/ two-high rolling mill / tuː hʌɪ ˈrəʊlɪŋ mɪl/ dvouválcová stolice /duo/ Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Rolled Stock Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s válcovanými polotovary. jazykový – Vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 40 YEAR: 3 Rolled Stock SUBJECT: Technology 40. Rolled Half-finished Products In rolling mill plants there are rolled semi-finished products or finished products: • shaped bars and beams • rails • sheets • seamless pipes • larger diameter wires • special rolled product Rolled products include sheets, structural shapes and rails as well as intermediate shapes for wire drawing or forging. Circular shapes, ‘I’ beams and railway tracks are manufactured using grooved rolls. Exercise 1 Match the English words to the Czech terms. Semi-finished products: 1. bloky (čtvercové) a) sheet bars 2. sochory (čtvercové) b) slabs 3. bramy (obdelníkové) c) blooms 4. ploštiny (obdelníkové) d) skelp 5. předvalky (trubkové) e) billets Exercise 2 Complete the gabs with the correct word from the box. bars stripes 1. Blooms are rails used rods to make ‘I’ beam sheets ______________ and _____________. 2. Billets are used to make ______________ and _____________. 3. Slabs are used to make ______________ and _____________. Key 1 1 c, 2 e, 3 b, 4 a, 5 d 2 ‘I’ beam and rails 2 sheets and stripes 3 bars and rods Dictionary English Pronunciation Czech bar / bɑː/ tyč beam /biːm/ nosník billet / ˈbɪlɪt/ sochor bloom / bluːm/ blok coil /kɔɪl/ svitek flat bar / flat bɑː/ plochá tyč I-beam, I section /ʌɪ biːm/, /ʌɪ ˈsɛkʃ(ə)n/ tyč tvaru I L-beam, L section, corner / ɛl biːm/, / ɛl ˈsɛkʃ(ə)n/, tyč tvaru L section /ˈkɔːnə ˈsɛkʃ(ə)n/ plate / pleɪt/ tlustý plech rail / reɪl/ kolejnice tyč na výztuž betonu, betonářská výztuž rolled stock, rolled semi- /rəʊld stɒk/, /rəʊld ˈsɛmi válcované polotovary, finished products ˈfɪnɪʃt ˈprɒdʌkts/ předvalky reinforcing bar, rebar /riːɪnˈfɔːsɪŋ bɑː/, /ˈriːbɑː/ round bar /raʊnd bɑː/ seamless pipe tube, seamless /ˈsiːmləs pʌɪp/ tjuːb/, kruhová tyč /ˈsiːmləs bezešvá trubka semi-product / ˈsɛmi ˈprɒdʌkt/ polotovar shape, section /ʃeɪp/, /ˈsɛkʃ(ə)n/ profil sheet / ʃiːt/ tenký plech slab / slab/ brama strip / strɪp/ pás structural shape / ˈstrʌktʃ(ə)r(ə)l ʃeɪp/ konstrukční profil T-beam, T section / tiː biːm/, / tiː ˈsɛkʃ(ə)n/ tyč tvaru T tube, pipe /tjuːb/, /pʌɪp/ trubka U-beam, U section, channel /juː biːm/, /juː ˈsɛkʃ(ə)n/, tyč tvaru U beam /ˈtʃan(ə)l biːm/ wire rod /wʌɪə rɒd/ válcovaný drát Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Technology of Forming - Drawing Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s tažením. jazykový – Prepositions, linking words, present continuous, speaking. Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 41 YEAR: 3 Technology of Forming Drawing SUBJECT: Technology 41. Forming Technology – Drawing Exercise 1 Complete the text with the correct word from the box. among to in which or into as of over Drawing is a metalworking process 1________ uses tensile forces 2________ stretch metal. 3________ the metal is drawn (pulled), it stretches thinner, 4________ a desired shape and thickness. Drawing is classified 5________ two types: sheet metal drawing and wire, bar, and tube drawing. It involves plastic deformation 6________ a curved axis.19 Drawing can be related to the production 7________ semi-finished products (wires, bars) 8________ processing technology of semifinished products to the product. Drawing belongs 9________ pressing techniques. Used methods: - Single-action draw - Deep drawing - Reverse drawing - Grooving 19 Drawing (manufacturing). Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-05-14]. Dostupné z: https://en.wikipedia.org/wiki/Drawing_(manufacturing). - Die darwing - Enlargement or narrowing - Stretch forming Exercise 2 Click on the link below to watch the video ‘China "automated" stamping plant Chinese factory (0:51). Describe what the workers are doing. Use present continuous. https://www.youtube.com/watch?v=W_YnaHNcISw Key 1 1 which, 2 to, 3 As, 4 into, 5 in, 6 over, 7 of, 8 or, 9 among Dictionary English Pronunciation Czech bar drawing /bɑː ˈdrɔːɪŋ/ tažení tyčí blank / blaŋk/ polotovar blankholder / blaŋkˈhəʊldə/ přidržovač cold drawing / kəʊld ˈdrɔːɪŋ/ tažení za studena deep drawing / diːp ˈdrɔːɪŋ/ hluboké tažení die, drawing die / dʌɪ/, /ˈdrɔːɪŋ dʌɪ/ tažnice direct drawing / dɪˈrɛkt ˈdrɔːɪŋ/ přímé tažení draft /drɑːft/ tah (operace při tažení) draw /ˈdrɔː/ táhnout drawability /ˈdrɔːəˈbɪlɪti/ tažitelnost, způsobilost k tažení drawing / ˈdrɔːɪŋ/ tažení drawing force / ˈdrɔːɪŋ fɔːs/ tažná síla drawing press / ˈdrɔːɪŋ prɛs/ tažný lis drawing speed / ˈdrɔːɪŋ spiːd/ tažná rychlost, rychlost tažení drawn part / drɔːn pɑːt/ tažená součást, výtažek formability /fɔːməˈbɪlɪti/ tvařitelnost forming /fɔːmɪŋ/ tváření grooving / ɡruːvɪŋ/ drážkování, žlábkování hot drawing /hɒt ˈdrɔːɪŋ/ tažení za tepla ironing, reduction drawing /ˈʌɪənɪŋ/, /rɪˈdʌkʃ(ə)n ˈdrɔːɪŋ/ tažení se ztenčením stěny punch, drawing punch / pʌn(t)ʃ/, / ˈdrɔːɪŋ pʌn(t)ʃ/ tažník redrawing / riːˈdrɔːɪŋ/ víceoperační tažení reverse drawing / rɪˈvəːs ˈdrɔːɪŋ/ zpětné tažení sheet-metal drawing / ʃiːt ˈmɛt(ə)l ˈdrɔːɪŋ / tažení plechu single action drawing /ˈsɪŋɡ(ə)l ˈakʃ(ə)n ˈdrɔːɪŋ/ jednoduché tažení stretch forming /strɛtʃ fɔːmɪŋ/ tažení vypínáním, přetahování wire drawing /wʌɪə ˈdrɔːɪŋ/ tažení drátu Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Drawn Stock Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s kovacími stroji. jazykový – Word order, present simple Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 42 Drawn Stock SUBJECT: Technology 42. Drawn Half-finished Products Exercise 1 Put the words to correct order to make sentence. half-finished be Drawn must usually products machined 1______________________________________________________. have They low accuracy dimensional 2______________________________________________________. their in surface not good Sometimes quality is 3______________________________________________________. starting they Therefore, serve materials as only 4______________________________________________________. are through die drawing drawn They 5______________________________________________________. Key 1 1 Drawn half-finished products must be usually machined. 2 They have low dimensional accuracy. 3 Sometimes their surface is not in good quality. 4 Therefore, they serve only as starting materials. 5 They are drawn through drawing die. Dictionary English Pronunciation angle /ˈaŋɡ(ə)l/ bar bar drawing coil cold drawing cold drawn bar, cold-drawn bar continuous drawing dimensional accuracy draft draw draw bench / bɑː/ / bɑː ˈdrɔːɪŋ/ / kɔɪl/ / kəʊld ˈdrɔːɪŋ/ / kəʊld drɔːn bɑː/, /kəʊld drɔːn bɑː/ / kənˈtɪnjʊəs ˈdrɔːɪŋ/ /dɪˈmɛnʃ(ə)n(ə)l ˈakjʊrəsi/ / drɑːft/ /drɔː/ / drɔː bɛn(t)/ drawability /ˈdrɔːəˈbɪlɪti/ drawing drawing die drawing machine drawn bar flat bar half-finished product hexagonal bar L-section patented wire patenting round bar round wire section square bar T-section wire wire drawability wire drawing / ˈdrɔːɪŋ/ / ˈdrɔːɪŋ dʌɪ/ / ˈdrɔːɪŋ məˈʃiːn/ /drɔːn bɑː/ /flat bɑː/ / hɑːf ˈfɪnɪʃt ˈprɒdʌkt/ /hɛkˈsag(ə)n(ə)l bɑː/ /ɛl ˈsɛkʃ(ə)n/ / ˈpat(ə)ntɪd wʌɪə/ /ˈpat(ə)ntɪŋ/ /raʊnd bɑː/ / raʊnd wʌɪə/ / ˈsɛkʃ(ə)n/ /skwɛː bɑː/ /tiː ˈsɛkʃ(ə)n/ / wʌɪə/ / wʌɪə ˈdrɔːəˈbɪlɪti/ / wʌɪə ˈdrɔːɪŋ/ Czech úhelník (tyč L-profil rovnoramenný) tyč tažení tyčí svitek tažení za studena tyč tažená za studena průběžné tažení rozměrová přesnost tah (operace při tažení) táhnout tažná stolice tažitelnost, způsobilost k tažení tažení průvlak drátotah tažená tyč plochá tyč polotovar šestihranná tyč tyč průřezu L, L-profil patentovaný drát patentování kruhová tyč kruhový drát průřez, profil čtvercová tyč tyč průřezu T, T-profil tažený drát tažitelnost drátu tažení drátu Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Production of Tubes and Pipes Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s válcovanými polotovary. jazykový – Reading skills, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 43 Production of Tubes and Pipes SUBJECT: Technology 43. Rolled Half-finished Products Exercise 1 Read the following text and answer these questions. 1. Name the three types of pipe mentioned in the text. 2. Which of them is cheaper to manufacture? 3. Which of them is made in centrifugal casting way? 4. Which of them should be stronger and more reliable? There are three processes for metallic pipe manufacture. Centrifugal casting of hot alloyed metal is one of the most prominent process. Ductile iron pipes are generally manufactured in such a fashion. Seamless (SMLS) pipe is formed by drawing a solid billet over a piercing rod to create the hollow shell. As the manufacturing process does not include any welding, seamless pipes are perceived to be stronger and more reliable. Historically seamless pipe was regarded as withstanding pressure better than other types, and was often more easily available than welded pipe. Welded pipe is formed by rolling plate and welding the seam. The weld flash can be removed from the outside or inside surfaces using a scarfing blade. The weld zone can also be heat treated to make the seam less visible. Welded pipe often has tighter dimensional tolerances than seamless, and can be cheaper if manufactured in the same quantities. 20 20 Pipe (fluid conveyance). Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Pipe_(fluid_conveyance). Exercise 2 Match the English terms a-i to the Czech 1-9. 1. Pás a) rolling mandrel 2. Profilovací válečky b) froming rolls 3. Svařovací válečky c) welding torches 4. Svar d) welding rolls 5. Svařená trubka e) top roll 6. Svařovací hořáky f) weld 7. Horní válec g) bottom roll 8. Spodní válec h) strip 9. Trn i) welded tube Exercise 3 Click on the link below to watch the video ‘How It's Made Ductile Iron Pipe’ (4.58) and answer these questions. 1. What is ductile iron pipe made of? 2. What do the workers add to make ductile iron? 3. Can the casting machine make pipes of different diameters? http://www.youtube.com/watch?v=kJGlgSZe4k4 Key 1 1 Ductile iron pipes, seamless pipe, welded pipe. 2 Welded pipes. 3 Ductile iron pipes. 4 Seamless pipe. 2 1 h, 2 b, 3 d, 4 f, 5 i, 6 c, 7 e, 8 g, 9 a 3 1 90% recycled metal. 2 Magnesium. 3 Yes, it can. Dictionary English Pronunciation Czech bending /bendɪŋ/ ohýbání butt-welded tube / bʌt wɛldɪd tjuːb/ trubka svařovaná natupo butt welding / bʌt wɛldɪŋ/ svařování natupo cold drawing / kəʊld ˈdrɔːɪŋ/ tažení za studena diameter / dʌɪˈamɪtə/ průměr drawn tube /drɔːn tjuːb/ trubka tažená electric-resistance welded (= / ɪˈlɛktrɪk rɪˈzɪst(ə)ns wɛldɪd trubka svařovaná ERW) tube tjuːb/ elektrickým odporem svařování elektrickým electric resistance welding / ɪˈlɛktrɪk rɪˈzɪst(ə)ns wɛldɪŋ/ odporem hot extrusion / hɒt ɪkˈstruːʒ(ə)n/ protlačování za tepla hot rolling / hɒt ˈrəʊlɪŋ/ válcování za tepla inside diameter (ID) /ɪnˈsʌɪd dʌɪˈamɪtə/ vnitřní průměr mandrel /ˈmandr(ə)l/ trn Mannesmann mill /ˈmʌnɛsmʌn mɪl/ Mannesmannova stolice outside diameter (OD) / aʊtˈsʌɪd dʌɪˈamɪtə/ vnější průměr piercing / ˈpɪəsɪŋ/ děrování piercing mill / ˈpɪəsɪŋ mɪl/ děrovací stolice pilger mill /ˈpɪlgə mɪl/ poutnická stolice pipe, tube / pʌɪp, tjuːb/ trubka plate /pleɪt/ tlustý plech seam / siːm/ šev seamless seamless tube, seamless pipe sheet / ˈsiːmləs/ / ˈsiːmləs tjuːb/, / ˈsiːmləs pʌɪp/ /ʃiːt/ bezešvý spiral tube / ˈspʌɪr(ə)l tjuːb/ spirálová trubka submerged arc welding /səbˈmɜːdʒd ɑːk ˈweldɪŋ/ svařování pod tavidlem wall thickness /wɔːl ˈθɪknəs/ tloušťka stěny welded tube, welded pipe / wɛldɪd tjuːb /, /wɛldɪd pʌɪp/ svařovaná trubka welding /wɛldɪŋ/ bezešvá trubka plech, tenký plech svařování Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Technology of Forming - Open-Die Forging Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s volným kováním. jazykový – Vocabulary, past continuous Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 44 YEAR: 3 SUBJECT: Technology of Forming - Open- Technology Die Forging 44. Forming Technology – Hammer Forging Exercise 1 Read the text below. Use the word list or a dictionary to check the unknown words. It is a gradual formation of the semi-product using simple tools (shims, chisels, punching pins). These procedures belong to the hammer forging: • upsetting • punching • bending • division • spreading • mounting • throughputing The basic blacksmith tools: • swages (machine hammer, press) • pliers, chisels, mounting shims, punching pins, .. Forging flange process: • reforging • initial material • forged piece of flange • upsetting • punching Exercise 2 Click on the link below to watch the video ‘Different Forging Processes’ (9:23). Underline the three main processes and number the right order of all processes a-k. https://www.youtube.com/watch?v=y0meRCdhZoI a) ring rolling, ____, ____ b) open-die forging, ____ c) hammer forging, ____ d) bar forging, ____ e) upsetting of the starting stock, ____ f) progressive forging, ____, ____, ____ g) punching, ____ h) notching, ____ i) step forging, ____, ____ j) progressive forging of second half ____ k) progressive forging into round shape, ____, ____, ____ Exercise 3 Use words from this worksheet and make few sentences about processes from the video in 2. Use past continuous. Example: The machine hammer was hitting red-hot material. ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ ________________________________________________________ Key 2 Underlined a, b, c; a 1,4, b 5, c 10, d 14, e 2, f 8,12,14, g 3, h 6, i 7,11, j 16, k 9,13,15 Dictionary English anvil Pronunciation /ˈanvɪl/ Czech kovadlina anvil, anvil block, hammer /ˈanvɪl/, /ˈanvɪl blɒk/, /ˈhamə šabota (bucharu) anvil ˈanvɪl/ bending /bendɪŋ/ ohýbání bottom die, lower die /ˈbɒtəm dʌɪ/, /ˈləʊə dʌɪ/ dolní kovadlo chisel /ˈtʃɪz(ə)l/ sekáč chisel /ˈtʃɪz(ə)l/ sekáč cogging / kɒɡɪŋ/ kulacení cutting off /ˈkʌtɪŋ ɒf/ sekání die / dʌɪ/ kovadlo dividing /dɪˈvʌɪdɪŋ/ dělení drawing out, fullering, tapering /ˈdrɔːɪŋ aʊt, ˈfʊlərɪŋ, ˈteɪpərɪŋ/ vytahování, prodlužování, kování do délky flat die / flat dʌɪ/ ploché kovadlo forge / fɔːdʒ/ kovat forging / fɔːdʒɪŋ/ kování forging hammer / fɔːdʒɪŋ ˈhamə/ kovací buchar forging press / fɔːdʒɪŋ prɛs / kovací lis form die /fɔːm dʌɪ/ tvarové kovadlo free forging hammer /friː fɔːdʒɪŋ ˈhamə/ buchar pro volné kování free forging press /friː fɔːdʒɪŋ prɛs/ lis pro volné kování hammer / ˈhamə/ kladivo hammer, power hammer / ˈhamə/, / ˈpaʊə ˈhamə/ buchar hammering / ˈhamərɪŋ/ kování na bucharu mandrel / ˈmandr(ə)l/ trn necking, reduction swaging /ˈnɛkɪŋ/, /rɪˈdʌkʃ(ə)n sweɪdʒɪŋ/ prosazování notching / nɒtʃɪŋ/ nasekávání offsetting, offset forging / ˈɒfsɛtɪŋ/, /ˈɒfsɛt fɔːdʒɪŋ/ přesazování English Pronunciation Czech open-die forging / ˈəʊp(ə)n dʌɪ fɔːdʒɪŋ/ volné kování piercing, holing, punching / ˈpɪəsɪŋ, həʊlɪŋ, pʌn(t)ʃɪŋ/ děrování, probíjení planishing, flattering / ˈplanɪʃɪŋ, ˈflatərɪŋ/ hlazení press / prɛs/ lis pressing / prɛsɪŋ/ kování na lisu progressive forging /prəˈɡrɛsɪv fɔːdʒɪŋ/ postupové kování, kování v postupové zápustce punch /pʌn(t)ʃ/ průbojník ram / ram/ beran (bucharu) ring rolling /rɪŋ ˈrəʊlɪŋ/ válcování kroužků, prstenců rough forging / rʌf fɔːdʒɪŋ/ kování na hrubo spreading, plating, expansion / sprɛdɪŋ, ˈpleɪtɪŋ, ɪkˈspanʃ(ə)n/ rozšiřování, rozkování, zploštění stepping / stɛpɪŋ/ osazování swages /sweɪdʒɪz/ tvarová kovátka swaging / sweɪdʒɪŋ/ profilování v zápustkách swaging die / sweɪdʒɪŋ dʌɪ/ profilovací kovadlo tongs /tɒŋz/ kovářské kleště tongs /tɒŋz/ kleště top die, upper die / tɒp dʌɪ/, /ˈʌpə dʌɪ/ horní kovadlo upsetting, upset forging /ʌpˈsɛtɪŋ/, /ʌpˈsɛt ˈfɔːdʒɪŋ/ pěchování V-die /viː dʌɪ/ úhlové kovadlo Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Technology of Forming - Impression-Die Forging Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se zápustkovým kováním. jazykový – Listening skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 45 Technology of Forming Impression-Die Forging SUBJECT: Technology 45. Forming Technology – Die Forging Exercise 1 Click on the link below to watch the video ‘Die forging process (open and closed die)’ (5:01) and answer these questions. 1. What is forging? 2. What size of forgings can be made using open die forging? 3. What accessory tolls are used? 4. What may preforming operations include? http://www.youtube.com/watch?v=YobXFODkp50 Key 1 1 Controlled deformation of metal. 2 From a few centimetres to 30 metres in length. 3 Saddles, blocks, rings, mandrels, punches. 4 Edging, blocking, finish-forging. Dictionary English Pronunciation Czech blocking /blɒkɪŋ/ předkování cavity / ˈkavɪti/ dutina closed die / kləʊzd dʌɪ/ uzavřená zápustka kování v uzavřené zápustce, closed die forging, flashless /kləʊzd dʌɪ ˈfɔːdʒɪŋ/, / flaʃəs kování bez výronku, forging ˈfɔːdʒɪŋ/ bezvýronkové zápustkové kování die, forging die / dʌɪ/, / ˈfɔːdʒɪŋ dʌɪ/ zápustka / dʌɪ ˈkavɪti /, / dʌɪ dutina zápustky ɪmˈprɛʃ(ə)n/ die forging, impression-die /dʌɪ ˈfɔːdʒɪŋ /, / ɪmˈprɛʃ(ə)n zápustkové kování forging, drop forging dʌɪ ˈfɔːdʒɪŋ/, / drɒp ˈfɔːdʒɪŋ/ kování v otevřené zápustce, die forging with flash / dʌɪ ˈfɔːdʒɪŋ wɪð flaʃ/ zápustkové kování s výronkem die cavity, die impression dimension /dɪˈmɛnʃ(ə)n/ rozměr finish forging /ˈfɪnɪʃ ˈfɔːdʒɪŋ/ kování na hotovo flash / flaʃ/ výronek flash gutter, flash space / flaʃ ˈgʌtə/, /flaʃ speɪs/ výronková drážka flash trimming / flaʃ ˈtrɪmɪŋ/ ostřihování výronku forging /ˈfɔːdʒɪŋ/ kování forging, forged piece /ˈfɔːdʒɪŋ/, / fɔːdʒd piːs/ výkovek forging die /ˈfɔːdʒɪŋ dʌɪ / kovací zápustka forging hammer / fɔːdʒɪŋ ˈhamə/ kovací buchar forging press / fɔːdʒɪŋ prɛs/ kovací lis forging reduction /ˈfɔːdʒɪŋ rɪˈdʌkʃ(ə)n / stupeň prokování forging temperature /ˈfɔːdʒɪŋ ˈtɛmp(ə)rətʃə / kovací teplota forming / fɔːmɪŋ/ tváření heating /ˈhiːtɪŋ/ ohřev lower die, bottom die /ˈləʊə dʌɪ/, /ˈbɒtəm dʌɪ/ dolní zápustka mandrel /ˈmandr(ə)l/ trn English Pronunciation Czech open die /ˈəʊp(ə)n dʌɪ/ otevřená zápustka precision die forging /prɪˈsɪʒ(ə)n dʌɪ ˈfɔːdʒɪŋ/ přesné zápustkové kování progressive die /prəˈɡrɛsɪv dʌɪ/ postupová zápustka punch /pʌntʃ/ průbojník shrinkage, contraction /ˈʃrɪŋkɪdʒ/, /kənˈtrakʃ(ə)n/ smrštění trimming /ˈtrɪmɪŋ/ ostřihování trimming die /ˈtrɪmɪŋ dʌɪ/ ostřihovací zápustka upper die, top die /ˈʌpə dʌɪ/, /tɒp dʌɪ/ horní zápustka upsetting, upset forging /ʌpˈsetɪŋ/, /ʌpˈset ˈfɔːdʒɪŋ/ (kovářské) pěchování Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Forging Machines Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s kovacími stroji. jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 46 YEAR: 3 Forging Machines SUBJECT: Technology 46. Forging Machines Exercise 1 Read the text below and complete the paragraph 15 with the correct title a-e. a) Vertical forging machines, b) Rotary forging machines, c) Horizontal forging machines, d) Forging rolls, e) Forging machines 1________________________________ is a group of machines for pressure shaping of metals (forging and stamping). The main types of forging machines are horizontal, vertical, and rotary machines and forging rolls. 2________________________________, which have horizontal movement of the working member, are designed for hot flashless die forging of bar-stock. 3________________________________, in which the working tool moves vertically, are designed for the production of small forgings, such as blanks for knives, hooks, and chisels (with single heating), and larger articles, such as blanks for propellers, axes, and other articles requiring repeated heating during the manufacturing process. These machines perform sequentially the basic forging operations drawing, swaging, and rolling. 4________________________________, in which the working element rotates together with the tool, are designed for swaging and hot drawing of articles, which usually have the shape of bodies of rotation. 5________________________________ occupy an intermediate position between forging machines and rolling units. Horizontal forging machines are widely used because of their very high productivity and versatility, which make possible the production of a variety of forgings of complex configuration with high dimensional precision and surface smoothness. 21 Exercise 2 Read the text 1 again and answer these questions. 1. Which machines are designed for hot flashless die forging of bar-stock? 2. Which machines perform sequentially the basic forging operations? 3. Which machines are highly productive? 21 Forging Machines. TheFreeDictionar [online]. 2015 [cit. 2015-06-10]. Dostupné z: http://encyclopedia2.thefreedictionary.com/Forging+Machines. Key 1 1 e, 2 c, 3 a, 4 b, 5 d 2 1 Horizontal forging machines. 2 Vertical forging machines. 3 Horizontal forging machines. Dictionary English Pronunciation Czech anvil /ˈanvɪl/ šabota (bucharu) blow, impact /bləʊ/ /ˈɪmpakt/ úder counter-blow hammer /ˈkaʊntə bləʊ ˈhamə/ protiúderový buchar crank forging press / kraŋk ˈfɔːdʒɪŋ prɛs/ klikový kovací lis crank press / kraŋk prɛs/ klikový lis double action press /ˈdʌb(ə)l ˈakʃ(ə)n prɛs / dvojčinný lis double-acting hammer /ˈdʌb(ə)l ˈaktɪŋ prɛs/ dvojčinný buchar drive / drʌɪv/ pohon drop forging hammer /drɒp ˈfɔːdʒɪŋ ˈhamə/ zápustkový kovací buchar drop forging press, die-forging press /drɒp ˈfɔːdʒɪŋ prɛs/, /dʌɪ zápustkový kovací lis ˈfɔːdʒɪŋ prɛs/ eccentric / ɪkˈsɛntrɪk/ výstředník eccentric press / ɪkˈsɛntrɪk prɛs / výstředníkový lis force /fɔːs/ síla forging / ˈfɔːdʒɪŋ/ kování forging hammer / fɔːdʒɪŋ ˈhamə/ kovací buchar forging machine /ˈfɔːdʒɪŋ məˈʃiːn/ kovací stroj forging press / fɔːdʒɪŋ prɛs/ kovací lis forging-down, through-forging /ˈfɔːdʒɪŋ daʊn/, / θruː ˈfɔːdʒɪŋ/ prokování forging rolls / ˈfɔːdʒɪŋ rɒls/ kovací válce free forging hammer / friː ˈfɔːdʒɪŋ ˈhamə/ buchar pro volné kování free forging press / friː ˈfɔːdʒɪŋ prɛs/ kovací lis pro volné kování gravity drop hammer /ˈɡravɪti drɒp ˈhamə/ padací buchar hammer, power hammer /ˈhamə/, /ˈpaʊə ˈhamə/ buchar hydraulic forging press / hʌɪˈdrɔːlɪk fɔːdʒɪŋ prɛs/ hydraulický kovací lis hydraulic press / hʌɪˈdrɔːlɪk prɛs/ hydraulický lis English Pronunciation knuckle-joint press /ˈnʌk(ə)l dʒɔɪnt prɛs/ kolenový lis mechanical forging press / mɪˈkanɪk(ə)l prɛs/ mechanický kovací lis mechanical press / mɪˈkanɪk(ə)l prɛs/ mechanický lis pressure / ˈprɛʃə/ tlak ram / ram/ beran (bucharu) rotary /ˈrəʊt(ə)ri/ rotační rotary swaging machine /ˈrəʊt(ə)ri ˈsweɪdʒɪŋ məˈʃiːn/ rotační kovací stroj screw press /skruː prɛs/ vřetenový lis, šroubový lis single action press /ˈsɪŋgəl ˈakʃ(ə)n prɛs/ jednočinný lis single-acting hammer / ˈsɪŋgəl ˈaktɪŋ ˈhamə / jednočinný buchar slide /slʌɪd/ beran (lisu) speed /spiːd/ rychlost stroke /strəʊk/ zdvih (dráha beranu) trimming press /ˈtrɪmɪŋ prɛs/ ostřihovací lis upsetting press /ʌpˈsetɪŋ prɛs/ pěchovací lis fɔːdʒɪŋ Czech Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Special Methods of Hot Forming Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s zvláštními způsoby tváření za tepla. jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 47 Special Methods of Hot Forming SUBJECT: Technology 47. Special Methods of Hot Forming Exercise 1 Read the text below and answer these questions. 1. Name the main methods of hot working. 2. What does pressing generally include? 3. Where is rolling performed? The principal methods of hot working are extrusion, drawing, forging and rolling. Rolling is the most extensive employed forming process. Rolling mainly consists of three major sub-categories: flat rolling, shape rolling and pipe rolling (including piercing). Forging may be sub-categorized as hamming, pressing, etc. Forging may be performed under hammers, in mechanical presses and upsetters or by a method known as roll forging. Pressing generally includes the manufacture of forged articles in hydraulic presses. Extrusion usually is performed in hydraulic presses which force the hot steel through a die. Rolling is performed in rolling mills of a variety of types. The present discussion will be limited to general descriptions of the various types of hot-working equipment and some of the principles of their operation. The two principal reasons for perform metal forming at elevated temperatures (hot working) are to reduce the forming loads through the reduction of the resistance of the steel to deformation, and to develop preferred metallurgical structures for strength and ductility of the finish products.22 22 Principle Methods for Hot Forming. Metal Pass [online]. 2002 [cit. 2015-06-04]. Dostupné z: http://www.metalpass.com/metaldoc/paper.aspx?docID=332. Key 1 1 Extrusion, drawing, forging and rolling. 2 The manufacture of forged articles in hydraulic presses. 3 In rolling mills. Dictionary English Pronunciation Czech circular forging /ˈsəːkjʊlə ˈfɔːdʒɪŋ/ tváření rotační zápustkou cross rolling, wedge rolling /krɒs ˈrəʊlɪŋ/, /wɛdʒ ˈrəʊlɪŋ/ příčné klínové válcování die /dʌɪ/ zápustka die parting line, die parting plane / dʌɪ ˈpɑːtɪŋ lʌɪn/, / dʌɪ ˈpɑːtɪŋ drawing /ˈdrɔːɪŋ/ tažení extrusion / ɪkˈstruː ʒ(ə)n/ protlačování flat rolling /flat ˈrəʊlɪŋ/ válcování plochých výrobků forging /ˈfɔːdʒɪŋ/ kování forging, forged piece /ˈfɔːdʒɪŋ/, /fɔːdʒd piːs/ výkovek forging die /ˈfɔːdʒɪŋ dʌɪ/ kovací zápustka forming / ˈfɔːmɪŋ/ tváření hot forming / hɒt ˈfɔːmɪŋ/ tváření za tepla hydraulic press /hʌɪˈdrɔːlɪk prɛs/ hydraulický lis piercing /ˈpɪəsɪŋ/ děrování pipe, tube / pʌɪp, tjuːb/ trubka punch /pʌn(t)ʃ/ lisovník radial forging /ˈreɪdɪəl ˈfɔːdʒɪŋ/ radiální kování rolling /ˈrəʊlɪŋ/ válcování rotary swaging /ˈrəʊt(ə)ri ˈsweɪdʒɪŋ/ rotační kování rotary swaging machine /ˈrəʊt(ə)ri ˈsweɪdʒɪŋ məˈʃiːn/ rotační kovací stroj shape rolling /ʃeɪp ˈrəʊlɪŋ/ válcování profilů split die / splɪt dělená zápustka pleɪn/ dělicí rovina zápustky /splɪt dʌɪ ˈfɔːdʒɪŋ/, /kɔː split-die forging, core ˈfɔːdʒɪŋ/, /ˌmʌltɪˈaksɪəl forging, multiaxial forging ˈfɔːdʒɪŋ/ vícecestné kování upsetting, upset forging /ʌpˈsɛtɪŋ/, /ʌpˈsɛt ˈfɔːdʒɪŋ/ pěchování wedge /wɛdʒ/ klín Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Shearing Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se stříháním. jazykový – Vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 48 Shearing SUBJECT: Technology 48. Cold Forming Technology – Cutting Exercise 1 Match the English terms of cutting ways (1-7) to the Czech (a-g). Simple cutting a) Děrováni Punching b) Prosté stříhání Cutting out c) Nastřihování Trimming d) Přistřihování Shaving e) Prostřihování Notching f) Ostřihování Cutting through g) Vystřihování Exercise 2 Find eight words from 1 in these word search puzzle. Key 1 1 b, 2 b, 3 g, 4 f, 5 d, 6 c, 7 e 2 Dictionary English Pronunciation Czech blank / blaŋk/ blank, stamping,, stamped part blanking, blank cutting, cutting-out, stamping / blaŋk/ /ˈstampɪŋ/, /stampd blanking die, stamping die /ˈblaŋkɪŋ dʌɪ/, /ˈstampɪŋ dʌɪ/ střihadlo burr /bəː/ otřep cut /kʌt/ stříhat cut /kʌt/ střih, střižná operace cutting /ˈkʌtɪŋ/ stříhání die, blanking die / dʌɪ/, /ˈblaŋkɪŋ dʌɪ/ střižnice fine blanking / fʌɪn ˈblaŋkɪŋ/ přesné vystřihování lancing, splitting /ˈlɑːnsɪŋ/, /ˈsplɪtɪŋ/ nastřihování notching /ˈnɒtʃɪŋ/ vystřihování zářezů parting /ˈpɑːtɪŋ/ rozstřihování perforating /ˈpəːfəreɪtɪŋ/ perforování piercing /ˈpɪəsɪŋ/ děrování punch, blanking shearing punch přístřih výstřižek pɑːt/ /ˈblaŋkɪŋ/ / blaŋk ˈkʌtɪŋ/, vystřihování /ˈkʌtɪŋ aʊt/ /ˈstampɪŋ/ punch, /pʌn(t)ʃ/, /ˈblaŋkɪŋ pʌn(t)ʃ/, střižník /ˈʃɪərɪŋ pʌn(t)ʃ/ punching /ˈpʌn(t)ʃɪŋ/ děrování, prostřihování punching die /ˈpʌn(t)ʃɪŋ dʌɪ/ děrovadlo shaving /ˈʃeɪvɪŋ/ přistřihování, dostřihování shear /ʃɪər/ stříhat na nůžkách shearing /ˈʃɪərɪŋ/ stříhání na nůžkách shear, shears /ʃɪər/, /ʃɪərz/ nůžky sheet /ʃiːt/ plech slotting /ˈslɒtɪŋ/ vystřihování drážek /slʌɡ/ odpad při děrování (materiál z děrovaného otvoru) slug English Pronunciation Czech stamping /ˈstampɪŋ/ lisování (obecný název pro různé tvářecí operace, prováděné na lisech) stamping /ˈstampɪŋ/ výlisek strip /strɪp/ pás trimming /ˈtrɪmɪŋ/ ostřihování Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Bending Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s ohýbáním. jazykový – Reading skills, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 49 Bending SUBJECT: Technology 49. Bending Exercise 1 Read the text below and answer these questions. 1. What is the typical product? 2. Name three basic types of bending? 3. What equipment is used for bending? Bending is a manufacturing process that produces a V-shape, Ushape, or channel shape along a straight axis in ductile materials, most commonly sheet metal. Commonly used equipment include box and pan brakes, brake presses, and other specialized machine presses. Typical products that are made like this are boxes such as electrical enclosures and rectangular ductwork. In press brake forming, a work piece is positioned over the die block and the die block presses the sheet to form a shape. There are three basic types of bending on a press brake. These three are Air Bending, Bottoming and Coining.23 23 Bending (metalworking). Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Bending_(metalworking). Exercise 2 Match the English terms to the Czech. Ways of bending: 1. Simple bending a) Zkrucování 2. Folding b) Prosté ohýbání 3. Straightening c) Zakružování 4. Bending rolling d) Rovnání 5. Flanging e) Ohraňování 6. Flanging (bordering) f) Osazování (prosazování) 7. Perforating g) Lemování 8. Twisting h) Obrubování Key 1 1 Boxes. 2 Air Bending, Bottoming and Coining. 3 Box and pan brakes, brake presses, and other specialized machine presses. 2 1 b, 2 e, 3 d, 4 c, 5 g, 6 h, 7 f, 8 a Dictionary English Pronunciation Czech air bending /ɛː ˈbendɪŋ/ volné ohýbání bend /bend/ ohýbat bending /ˈbendɪŋ/ ohýbání bending die, bending tool /ˈbendɪŋ dʌɪ/, /ˈbendɪŋ tuːl/ ohýbadlo bending die / ˈbendɪŋ dʌɪ/ ohybnice bending machine /ˈbendɪŋ məˈʃiːn/ ohýbací stroj, ohýbačka bending press /ˈbendɪŋ prɛs/ ohýbací lis bending punch /ˈbendɪŋ pʌn(t)ʃ/ ohybník brake bending / breɪk ˈbendɪŋ / ohraňování corrugating /ˈkɒrʊɡeɪtɪŋ/ zvlňování curling, beading /ˈkəːlɪŋ/, /ˈbiːdɪŋ/ obrubování (vyztužování okraje) die bending / dʌɪ bendɪŋ/ ohýbání v ohýbadle flanging / ˈflandʒɪŋ/ hand bender, hand bending machine /hand ˈbɛndə/, / hand ˈbendɪŋ məˈʃiːn/ lemování (ohýbání okrajů o 90°) ruční ohýbací stroj, ruční ohýbačka hemming /ˈhɛmɪŋ/ přehýbání o 180° hydraulic press /hʌɪˈdrɔːlɪk prɛs/ hydraulický lis mechanical press /mɪˈkanɪk(ə)l prɛs/ mechanický lis pressure pad /ˈprɛʃə pad/ doraz roll bending / rəʊl bendɪŋ/ zakružování rotary bending / ˈrəʊt(ə)ri bendɪŋ/ rotační ohýbání, ohýbání navíjením seaming / siːmɪŋ/ drápkování sheet-metal drawing / ʃiːt ˈmɛt(ə)l ˈdrɔːɪŋ / tažení plechu stamping, pressing /ˈstampɪŋ/, /ˈprɛsɪŋ/ výlisek stretch bending / strɛtʃ ˈbendɪŋ/ ohýbání napínáním twisting / ˈtwɪstɪŋ/ zkrucování English Pronunciation U-bending, channel bending V-bending, vee bending, angle bending / juː bendɪŋ, ˈtʃan(ə)l V-die /viː dʌɪ/ ˈbendɪŋ/ / viː ˈbendɪŋ, ˈaŋg(ə)l ˈbendɪŋ/ Czech ohýbání do tvaru U ohýbání do tvaru V ohybník tvaru V Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Bending - Calculation Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s výpočtem ohýbání. jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 50 YEAR: 3 Bending - Calculation SUBJECT: Technology 50. Bending - Calculation Exercise 1 Read the text below and put the steps of the calculation into correct order. The calculation of shear forces and bending moments in loaded beams is a common requirement in civil and structural engineering. One common approach to this calculation involves four steps: 1 a) Check the calculation by doing the same on the other section of the beam created by the imaginary cut. 2 b) Calculate the reactions at the supports. 3 c) Calculate the force and moment at the imaginary cut. 4 d) Imagine cutting the beam and draw a free body diagram of one of the resulting sections the beam. This process relies on the concepts of equilibrium and compatibility and on Newton’s third law of motion. In the examples here, it also makes use of equivalent point loads as a way of simplifying the calculations.24 24 Bending (metalworking). Queen's University Belfast [online]. 2009 [cit. 2015-06-04]. Dostupné z: http://www.qub.ac.uk/elearning/public/bendingmoments/. Key 1 1 b, 2 d, 3 c, 4 a Dictionary English Pronunciation bend bend angle bend radius bendability bending bending force bending length bent part blank /ˈbend/ /ˈbend ˈaŋɡ(ə)l/ /ˈbend ˈreɪdɪəs/ /bɛndəˈbɪlɪti/ / ˈbendɪŋ/ / ˈbendɪŋ fɔːs/ / ˈbendɪŋ lɛn(t)θ/ / ˈbent pɑːt/ /blaŋk/ bottoming /ˈbɒtəmɪŋ/ calculation compression force dimension elastic deformation extended length neutral axis neutral fiber outside diameter (OD) /kalkjʊˈleɪʃ(ə)n/ /kəmˈprɛʃ(ə)n fɔːs/ /dɪˈmɛnʃ(ə)n/ /ɪˈlastɪk ˌdiːfɔːˈmeɪʃ(ə)n/ / ɪkˈstɛndɪd lɛŋθ/ / ˈnjuːtr(ə)l ˈaksɪs/ / ˈnjuːtr(ə)l ˈfʌɪbə/ /´ aʊtsʌɪd dʌɪˈamɪtə/ overbending /ˈəʊvəˈbendɪŋ/ plastic deformation springback, spring back springback compensation, spring back compensation sheet, sheet metal sheet metal bending tension force tube tube bending thickness wall thickness /ˈplastɪk ˌdiːfɔːˈmeɪʃ(ə)n/ /´ sprɪŋbak/ /´ sprɪŋbak kɒmpɛnˈseɪʃ(ə)n/ /ʃiːt/, /ʃiːt ˈmɛt(ə)l/ /ʃiːt /ˈmɛt(ə)lˈbendɪŋ/ /ˈtɛnʃ(ə)n fɔːs/ /tjuːb/ /tjuːbˈbendɪŋ / / ˈθɪknəs/ /´ wɔːl ˈθɪknəs/ Czech ohyb úhel ohybu poloměr ohybu ohybatelnost ohýbání ohýbací síla délka ohybu ohýbaná součást polotovar kalibrace (zvětšení lisovací síly na konci ohýbání k vyrovnání zpětného odpružení) výpočet tlačná síla rozměr pružná deformace rozvinutá délka neutrální osa neutrální vlákno vnější průměr přetažení ohybu (k vyrovnání zpětného odpružení) plastická deformace zpětné odpružení vyrovnání zpětného odpružení plech ohýbání plechů tažná síla trubka ohýbání trubek tloušťka tloušťka stěny Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Bending of Tubes Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s ohýbáním trubek . jazykový – Present continuous Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 51 YEAR: 3 SUBJECT: Technology Bending of Tubes 51. Cold Forming Technology – Tube Bending Exercise 1 Click on the link below to watch the video ‘CNC tube bending machines’ (3:01). Use the words from the box and make sentences to describe the actions in the video. https://www.youtube.com/watch?v=DlJC6_eSfmU turn move press push side forward tool wire roll pull bend cut stop make create backward machine tube grip robot shape left knife right jaws screw pipe 1 _______________________________________________________. 2 _______________________________________________________. 3 _______________________________________________________. 4 _______________________________________________________. 5 _______________________________________________________. 6 _______________________________________________________. 7 _______________________________________________________. Key 1 Sample answers: The machine is gripping the wire and bending it. The jaws are holding the tube. The robot is making the screw inside of the tube. The machine is rolling the tube forwards. The jaws are turning around the tube. Dictionary English bending Pronunciation /ˈbendɪŋ/ Czech ohýbání ohýbací šablona, tvarovka bending die, form die, form /ˈbendɪŋ dʌɪ/, /fɔːm dʌɪ/, (kotouč rotačního ohýbacího block /fɔːm blɒk/ stroje, opatřený drážkou) bending head /ˈbendɪŋ hɛd/ ohýbací hlava bending machine, bender /ˈbendɪŋ məˈʃiːn/, /ˈbɛndə/ ohýbací stroj, ohýbačka bending mandrel /ˈbendɪŋ ˈmandr(ə)l/ ohýbací trn bending spring /ˈbendɪŋ sprɪŋ/ pružina pro ohýbání trubek clamping shoe, clamping die /ˈklampɪŋ ʃuː/, /ˈklampɪŋ dʌɪ/ upínací čelist compression bending / kəmˈprɛʃ(ə)n ˈbendɪŋ/ ohyb tlakem cross-section flattening /krɒs ˈsɛkʃ(ə)n ˈflat(ə)nɪŋ/ zploštění průřezu (trubky) fixed form block / fɪkst fɔːm blɒk/ fixní ohýbací šablona grip /grɪp/ uchopit heating /ˈhiːtɪŋ/ ohřev jaws /dʒɔːs/ čelisti mandrel / ˈmandr(ə)l/ trn manual roll bender /ˈmanjʊ(ə)l rəʊl ˈbɛndə/ ruční ohýbačka trubek (s kyvným ramenem, a kotoučem) pressure shoe, pressure die /ˈprɛʃə ʃuː/, /ˈprɛʃə dʌɪ/ ohýbací čelist, přítlačná čelist roll bending / rəʊl ˈbendɪŋ/ zakružování roll bending machine / rəʊl ˈbendɪŋ məˈʃiːn/ zakružovací stroj rotary bending /ˈrəʊt(ə)ri ˈbendɪŋ/ rotační ohýbání, ohýbání navíjením rotary tube bending machine, rotary tube bender /ˈrəʊt(ə)ri tjuːb ˈbendɪŋ məˈʃiːn/, /ˈrəʊt(ə)ri tjuːb ˈbɛndə/ rotační ohýbací stroj na trubky rotary bending with, axial stretching /ˈrəʊt(ə)ri ˈbendɪŋ wɪð ˈaksɪəl strɛtʃɪŋ/ rotary die stretch bending machine rotační ohýbání s navíjením na šablonu s osovým napínáním stroj na rotační ohýbání /ˈrəʊt(ə)ri dʌɪ strɛtʃ ˈbendɪŋ s navíjením na šablonu məˈʃiːn/ s osovým napínáním English Pronunciation Czech rotating form block / ˈrə(ʊ)ˈteɪtɪŋ fɔːm blɒk/ rotační ohýbací šablona sand bending / sand ˈbendɪŋ/ ohýbání trubek s pískovou náplní spring /sprɪŋ/ pružina springback, spring back /ˈsprɪŋbak/ zpětné odpružení stretch bending /strɛtʃ ˈbendɪŋ/ ohýbání napínáním stretch bending machine, /strɛtʃ ˈbendɪŋ stretch bender /strɛtʃ ˈbɛndə/ məˈʃiːn/, napínací ohýbací stroj tube /tjuːb/ trubka tube bending /tjuːb ˈbendɪŋ / ohýbání trubek tube bending machine, tube / tjuːb ˈbendɪŋ bender /tjuːb ˈbɛndə/ məˈʃiːn/, ohýbací stroj na trubky wall thickness reduction /wɔːl ˈθɪknəs rɪˈdʌkʃ(ə)n/ ztenčení stěny (trubky) wiper die, wiper shoe /ˈwʌɪpə dʌɪ /, /ˈwʌɪpə ʃuː/ hladicí čelist wire /ˈwʌɪə/ drát Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Drawing Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s tažením. jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 52 Drawing SUBJECT: Technology 52. Drawing Exercise 1 Read the text below and answer these questions. 1. What are the two types of drawing? 2. What does sheet metal drawing involve? 3. Why is drawing classified as a cold working process? Drawing is a metalworking process which uses tensile forces to stretch metal. As the metal is drawn (pulled), it stretches thinner, into a desired shape and thickness. Drawing is classified in two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet metal drawing is that it involves plastic deformation over a curved axis. For wire, bar, and tube drawing the starting stock is drawn through a die to reduce its diameter and increase its length. Drawing is usually done at room temperature, thus classified a cold working process. 25 25 Drawing (manufacturing). Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/w/index.php?title=Drawing_(manufacturing)&redirect=no. Key 1 1 Sheet metal drawing and wire, bar, and tube drawing. 2 Plastic deformation over a curved axis. 3 Because it is usually done at room temperature. Dictionary English Pronunciation Czech beading /ˈbiːdɪŋ/ žlábkování bar drawing /bɑː ˈdrɔːɪŋ/ tažení tyčí cold drawing / kəʊld ˈdrɔːɪŋ/ tažení za studena drawing /ˈdrɔːɪŋ/ tažení drawing tool, drawing die /ˈdrɔːɪŋ tuːl/, /ˈdrɔːɪŋ dʌɪ/ tažný nástroj, tažidlo drawn part, stamping /ˈdrɔːn pɑːt/, /stampɪŋ/ výtažek embossing /ɪmˈbɒsɪŋ/ vtlačování mělkých tvarů expanding /ɪkˈspandɪŋ/ rozšiřování final drawing, finish /ˈfʌɪn(ə)l ˈdrɔːɪŋ/, /ˈfɪnɪʃ drawing, drawing to size ˈdrɔːɪŋ/, /ˈdrɔːɪŋ tə sʌɪz/ dokončovací tažení kalibrační tažení ironing, reduction drawing /ˈʌɪənɪŋ/, /rɪˈdʌkʃ(ə)n ˈdrɔːɪŋ/ tažení se ztenčením stěny neck drawing /nɛk ˈdrɔːɪŋ/ tažení hrdla, lemování otvoru, lemování okrajů reverse drawing /rɪˈvəːs ˈdrɔːɪŋ/ zpětné tažení sheet-metal drawing / ʃiːt ˈmɛt(ə)l ˈdrɔːɪŋ / tažení plechu stretch forming, wrap forming wire drawing stretch /strɛtʃ fɔːmɪŋ/, fɔːmɪŋ/ /wʌɪə ˈdrɔːɪŋ/ /strɛtʃ rap tažení vypínáním přetahování tažení drátu Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Extrusion Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s protlačováním. jazykový – Vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 53 Extrusion SUBJECT: Technology 53. Extrusion Exercise 1 Match the English terms to the Czech. 1. Bulk forming a) Vtlačování 2. Forcing b) Tlačení tvaru 3. Shape forcing c) Zpětné protlačování 4. Extrusion d) Objemové tváření 5. Forward extrusion e) Ražení 6. Backward extrusion f) Prosté 7. Combined forward and g) Tlačení backward extrusion 8. Side extrusion h) Protlačování 9. Indentation i) Sdružené protlačování 10. Stamping j) Dopředné protlačování 11. Simple k) Stranové protlačování Exercise 2 Find 11 words from 1 in the puzzle below. Key 1 1 d, 2 g, 3 b, 4 h, 5 j, 6 c, 7 i, 8 k, 9 a, 10 e, 11 f 2 Dictionary English Pronunciation Czech bulk forming / bʌlk fɔːmɪŋ/ tváření objemové cold extrusion / kəʊld ɪkˈstruː ʒ(ə)n/ protlačování za studena combined extrusion /kəmˈbʌɪnd ɪkˈstruː ʒ(ə)n/ sdružené protlačování, kombinované protlačování die, extrusion die / dʌɪ/, / ɪkˈstruː ʒ(ə)n dʌɪ/ průtlačnice direct extrusion (forward extrusion) / extrude / ɪkˈstruːd/ protlačovat extrusion / ɪkˈstruː ʒ(ə)n/ protlačování extrusion / ɪkˈstruː ʒ(ə)n/ protlaček extrusion press / ɪkˈstruː ʒ(ə)n prɛs/ protlačovací lis hobbing /hɒbɪŋ/ vtlačování dutin hollow sections / ˈhɒləʊ ˈsɛkʃ(ə)n/ duté profily hot extrusion / hɒt ɪkˈstruː ʒ(ə)n/ protlačování za tepla hydraulic press /hʌɪˈdrɔːlɪk prɛs/ hydraulický lis indirect extrusion (backward extrusion, reverse extrusion) / ɪndɪˈrɛkt ɪkˈstruː ʒ(ə)n/, /ˈbakwəd ɪkˈstruː ʒ(ə)n/, /rɪˈvəːs ɪkˈstruː ʒ(ə)n/ nepřímé protlačování (zpětné protlačování, protisměrné protlačování) mechanical press /mɪˈkanɪk(ə)l prɛs/ mechanický lis přímé protlačování dɪˈrɛkt ɪkˈstruː ʒ(ə)n/, (dopředné protlačování, /ˈfɔːwəd ɪkˈstruː ʒ(ə)n/ sousledné protlačování) radial extrusion, lateral extrusion /pʌn(t)ʃ/, /ɪkˈstruː ʒ(ə)n průtlačník pʌn(t)ʃ/ /ˈreɪdɪəl ɪkˈstruː ʒ(ə)n/, radiální protlačování, /ˈlat(ə)r(ə)l ɪkˈstruː ʒ(ə)n/ stranové protlačování ram /ram/ beran lisu warm extrusion /wɔːm ɪkˈstruː ʒ(ə)n/ protlačování s poloohřevem punch, extrusion punch Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Casting - Principles and Methods Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s principem slévárenství a druhy lití. jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 54 Casting - Principles and Methods SUBJECT: Technology 54. Casting - Principles and Methods Exercise 1 Complete the text with the correct form of the verbs in brackets. In metalworking, casting 1___________ (involve) pouring liquid metal into a mold, which contains a hollow cavity of the desired shape, and then allowing it to 2___________ (cool) and solidify. The solidified part is also 3___________ (know) as a casting, which 4___________ (be) ejected or 5___________ (break) out of the mold to 6___________ (complete) the process. Casting is most often used for 7___________ (make) complex shapes that would 8___________ (be) difficult or uneconomical to 9___________ (make) by other methods. Casting processes have 10___________ (be) known for thousands of years, and widely 11___________ (use) for sculpture, especially in bronze, jewellery in precious metals, and weapons and tools. Traditional techniques 12___________ (include) lost-wax casting, plaster mold casting and sand casting. The modern casting process 13___________ (be) subdivided into two main categories: expendable and non-expendable casting. It is further 14___________ (break) down by the mold material, such as sand or metal, and pouring method, such as gravity, vacuum, or low pressure.26 26 Casting (metalworking). Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/?title=Casting_(metalworking). Key 1 1 involves, 2 cool, 3 known, 4 is, 5 broken, 6 complete, 7 making, 8 be, 9 make, 10 been, 11 used, 12 include, 13 is, 14 broken Dictionary English Pronunciation Czech burnt-pattern casting /bɜːnt ˈpat(ə)n ˈkɑːstɪŋ/ lití na spalitelný model casting / ˈkɑːstɪŋ/ lití, odlévání casting / ˈkɑːstɪŋ/ odlitek casting mould / ˈkɑːstɪŋ məʊld/ licí forma, odlévací forma centrifugal casting / ˌsɛntrɪˈfjuːg(ə)l ˈkɑːstɪŋ/ odstředivé lití continuous casting / kənˈtɪnjʊəs ˈkɑːstɪŋ / plynulé lití, kontinuální lití core /kɔː/ jádro expendable mould /ɪkˈspɛndəb(ə)l məʊld/ netrvalá forma, jednorázová forma expendable-mould casting /ɪkˈspɛndəb(ə)l məʊld ˈkɑːstɪŋ/ lití do netrvalých forem foundry / ˈfaʊndri/ slévárna foundryman / ˈfaʊndriman/ slévač foundry furnace / ˈfaʊndri ˈfəːnɪs/ slévárenská pec furnace /ˈfəːnɪs/ pec ground moulding, moulding hand moulding floor /ɡraʊnd ˈməʊldɪŋ/, /flɔː ˈməʊldɪŋ/ /hand ˈməʊldɪŋ/ formování do půdy ruční formování investment casting, (lost- / ɪnˈvɛs(t)m(ə)nt ˈkɑːstɪŋ/, lití na vytavitelný model, /lɒst waks ˈkɑːstɪŋ/ wax casting) (lití na ztracený vosk) ladle /ˈleɪd(ə)l/ licí pánev machine moulding /məˈʃiːn ˈməʊldɪŋ/ strojní formování melting /ˈmɛltɪŋ/ tavení melting furnace /ˈmɛltɪŋ ˈfəːnɪs / tavicí pec molten metal /ˈməʊlt(ə)n ˈmɛt(ə)l/ roztavený kov mould, mold / məʊld/ forma mould casting / məʊld ˈkɑːstɪŋ/ lití do forem moulding, molding /ˈməʊldɪŋ/ formování pattern /ˈpat(ə)n/ model permanent mould / ˈpəːm(ə)nənt məʊld/ trvalá forma English Pronunciation permanent-mould casting / ˈpəːm(ə)nənt məʊld ˈkɑːstɪŋ/ Czech lití do trvalých forem precision casting /prɪˈsɪʒ(ə)n ˈkɑːstɪŋ/ přesné lití pressure die casting /ˈprɛʃə dʌɪ ˈkɑːstɪŋ/ tlakové lití raw casting / rɔː ˈkɑːstɪŋ/ surový odlitek rough casting /rʌf ˈkɑːstɪŋ/ hrubý odlitek running system system, gating /ˈrʌnɪŋ ˈsɪstəm/, / ɡeɪtɪŋ ˈsɪstəm/ vtoková soustava sand casting /sand ˈkɑːstɪŋ/ lití do písku sand mould casting /sand məʊld ˈkɑːstɪŋ/ lití do pískových forem shell moulding /ʃɛl ˈməʊldɪŋ/ skořepinové formování shell casting /ʃɛl ˈkɑːstɪŋ/ lití do skořepinových forem solidify /səˈlɪdɪfʌɪ/ tuhnout vacuum casting /ˈvakjuːm ˈkɑːstɪŋ/ vakuové lití vacuum forming /ˈvakjuːm ˈfɔːmɪŋ/ vakuové formování Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Expendable-Mould Casting with Permanent Pattern Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s odléváním do netrvalých forem s trvalým modelem. jazykový – vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 55 SUBJECT: Expendable-Mould Casting with Technology Permanent Pattern 55. Permanent Mould Casting Exercise 1 Put the casting manufacturing process steps in the right order. 1______________________ Blow-out of casting 2______________________ Drawing of component 3______________________ Production of moulds and core boxes 4______________________ Production of pattern equipment 5______________________ Mould assembly 6______________________ Removing of gating 7______________________ Casting 8______________________ Rough casting 9______________________ Drawing of casting 10_____________________ Checking of casting 11_____________________ Fettling 12_____________________ Raw-casting 13_____________________ Heat treatment of casting Exercise 2 Complete this cross word puzzle. ACROSS DOWN 5 surový 1 poloviny modelu 7 formovací směs 2 jaderník 9 výrobní výkres 3 odlitek 10 odlučovač strusky 4 svorka 12 nálitek 6 vtokový kanál 13 vodící kolík 8 jádrové známky 11 formovací rám Key 1 1 Drawing of component, 2 Drawing of casting, 3 Production of pattern equipment, 4 Production of moulds and core boxes, 5 Mould assembly, 6 Casting, 7 Blow-out of casting, 8 Raw-casting, 9 Removing of gating, 10 Heat treatment of casting, 11 Fettling, 12 Rough casting, 13 Checking of casting 2 1 pattern halves, 2 core box, 3 casting, 4 fastener, 5 raw, 6 sprue, 7 sand mixture, 8 core prints, 9 drawing, 10 runner, 11 mould box, 12 riser, 13 locating pin Dictionary English Pronunciation Czech casting, pouring /ˈkɑːstɪŋ/, /pɔːrɪŋ/ odlévání, lití clay /kleɪ/ jíl cope /kəʊp/ vršek formy cope box /kəʊp bɒks/ vrchní formovací rám core /kɔː/ jádro crane ladle /kreɪn ˈleɪd(ə)l/ jeřábová licí pánev drag /draɡ/ spodek formy drag box /draɡ bɒks/ spodní formovací rám dry-sand mould /drʌɪ sand məʊld/ vysušená forma drying /drʌɪŋ/ sušení dusting /dʌstɪŋ/ poprášení expendable mould /ɪkˈspɛndəb(ə)l məʊld/ netrvalá forma, jednorázová forma expendable-mould casting /ɪkˈspɛndəb(ə)l məʊld ˈkɑːstɪŋ/ lití do netrvalých forem flask, mould box / flɑːsk/, / məʊld bɒks/ formovací rám fettling /ˈfɛtlɪŋ/ čištění gate /ɡeɪt/ zářez green-sand mould /ɡriːn sand məʊld/ forma na syrovo ground moulding, moulding floor /ɡraʊnd ˈməʊldɪŋ/, ˈməʊldɪŋ/ /flɔː formování do půdy hand ladle /hand ˈleɪd(ə)l/ ruční licí pánev hand moulding /hand ˈməʊldɪŋ/ ruční formování jolting, jolt ramming /ˈdʒəʊltɪŋ/, /dʒəʊlt ˈramɪŋ/ střásání ladle /ˈleɪd(ə)l/ licí pánev machine moulding /məˈʃiːn ˈməʊldɪŋ/ strojní formování mould /məʊld/ forma mould assembly /məʊld əˈsɛmbli/ skládání formy mould board /məʊld bɔːd/ formovací deska English Pronunciation Czech mould material /məʊld məˈtɪərɪəl/ formovací materiál moulding / ˈməʊldɪŋ/ formování moulding machine / ˈməʊldɪŋ məˈʃiːn/ formovací stroj parting plane /ˈpɑːtɪŋ pleɪn/ dělicí rovina pattern / ˈpat(ə)n/ model pattern moulding /ˈpat(ə)n ˈməʊldɪŋ/ modelové formování permanent pattern /ˈpəːm(ə)nənt ˈpat(ə)n/ trvalý model pouring basin /pɔːrɪŋ ˈbeɪs(ə)n/ vtoková jamka punching of vent holes /pʌn(t)ʃɪŋ əv vɛnt həʊlz/ vytváření průduchů ramming / ˈramɪŋ/ pěchování raw casting / rɔː ˈkɑːstɪŋ/ surový odlitek removable-flask moulding, flaskless moulding /rɪˈmuːvəbl flɑːsk ˈməʊldɪŋ/, bezrámové formování /flɑːskles ˈməʊldɪŋ/ rolling over /ˈrəʊlɪŋ ˈəʊvə/ obrácení rough casting /ˈrʌf ˈkɑːstɪŋ/ hrubý odlitek riser /ˈrʌɪzə/ nálitek runner /ˈrʌnə/ vtokový kanál running system, gating system /ˈrʌnɪŋ ˈsɪstəm/, ˈsɪstəm/ sand casting /sand ˈkɑːstɪŋ/ lití do písku sand mould /sand məʊld/ písková forma sand mould casting /sand məʊld ˈkɑːstɪŋ/ lití do pískových forem slag trap /slaɡ trap/ struskovák sprue / spruː/ vtok squeeze ramming, squeezing /skwiːz ˈramɪŋ/, /skwiːzɪŋ/ lisování whistler /ˈwɪslə/ výfuk /ɡeɪtɪŋ vtoková soustava Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Patterns and Moulding Materials Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s modely a formovacími materiály. jazykový – Reading skills Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 56 Patterns and Moulding Materials SUBJECT: Technology 56. Patterns and Moulding Materials Exercise 1 Match the type of pattern a-h to the correct definition 1-8. a) Solid or single piece patterns b) Self core patterns c) Pattern d) Shell patterns e) Gated patterns f) Cope and drag patterns g) Split patterns h) Patterns with loose pieces 1. ___________________________ is the solid form that is used to make the mould. 2. ___________________________ are the patterns with shapes having straight draft. 3. ___________________________ are patterns having a hollow portion with straight draft which is used for producing its own core during moulding process itself. 4. ___________________________ Many patterns cannot be made in a single piece because they have back draft which does not permit their withdrawal. Such patterns are made split into two parts. 5. ___________________________ Some castings require patterns which have parts with back draft in such a way that they cannot be made into split patterns. In these patterns the parts with back draft are made into loose pieces so that the loose pieces can be removed separately from the mould after the main body of the pattern has been removed. 6. ___________________________ are number of loose patterns connected with a gating system. 7. ___________________________ are used mostly for piping work or for producing drainage fittings. 8. ___________________________ For medium and large size castings separate pattern plates are made for the cope and drag halves. 27 27 Moulding Patterns | Sand Casting Patterns | Patterns And Moulds. Mechanical Engineering [online]. 2015 [cit. 2015-06-04]. Dostupné z: http://www.mechanicalengineeringblog.com/3021-moulding-patterns-sandcasting-patterns-patterns-and-moulds/. Key 1 1 c, 2 a, 3 b, 4 g, 5 h, 6 e, 7 d, 8 f Dictionary English Pronunciation Czech alignment pin /əˈlʌɪnm(ə)nt pɪn/ spojovací kolík allowances /əˈlaʊənsɪz/ přídavky allowances for shrinkage /əˈlaʊənsɪz fə ˈʃrɪŋkɪdʒ/ přídavky na smrštění allowances for machining /əˈlaʊənsɪz fə məˈʃiːnɪŋ/ přídavky na obrábění backing sand /ˈbakɪŋ sand/ výplňový písek bentonite /ˈbɛntənʌɪt/ bentonit binder / ˈbʌɪndə/ pojivo clay /kleɪ/ jíl core /kɔː(r)/ jádro core box / kɔː(r) bɒks/ jaderník core print / kɔː(r) prɪnt/ známka jádra core sand / kɔː(r) sand/ jádrový písek draft, taper /drɑːft/, /ˈteɪpə/ formovací úkos facing sand / ˈfeɪsɪŋ sand / modelový písek filler sand / ˈfɪlə sand/ výplňový písek fire clay, fireclay /ˈfʌɪə kleɪ/, /ˈfʌɪəkleɪ/ šamot floor sand /flɔː sand/ písek pro formování do půdy foundry sand /ˈfaʊndri sand/ slévárenský písek high-silica sand /high ˈsɪlɪkə sand/ křemičitý písek, křemenný písek inorganic binder /ɪnɔːˈɡanɪk ˈbʌɪndə/ anorganické pojivo mould material /məʊld məˈtɪərɪəl/ formovací materiál moulding mixture /ˈməʊldɪŋ ˈmɪkstʃə/ formovací směs natural sand /ˈnatʃ(ə)r(ə)l sand/ přírodní písek organic binder /ˈɔːɡanɪk ˈbʌɪndə/ organické pojivo parting dust /ˈpɑːtɪŋ dʌst/ dělicí prášek parting plane /ˈpɑːtɪŋ pleɪn/ dělicí rovina parting sand /ˈpɑːtɪŋ sand/ dělicí písek pattern /ˈpat(ə)n/ model pattern with loose pieces /ˈpat(ə)n wɪð luːs ˈpɪːsɪz/ model se snímatelnou částí resin /ˈrɛzɪn/ pryskyřice plaster of Paris /ˈplɑːstə əv ˈparɪs/ sádra sand /sand/ písek silica /ˈsɪlɪkə/ křemen solid pattern /ˈsɒlɪd ˈpat(ə)n/ nedělený model split pattern /splɪt ˈpat(ə)n/ dělený model shrinkage / ˈʃrɪŋkɪdʒ/ smrštění sweep pattern /sweep ˈpat(ə)n/ šablona synthetic sand /sɪnˈθɛtɪk sand/ syntetický písek wax /waks/ vosk water glass /ˈwɔːtə ɡlɑːs/ vodní sklo wood /wʊd/ dřevo Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Moulding with Permanent Patterns Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení se zaformováním s trvalými modely. jazykový – Present continuous, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 57 YEAR: 3 Moulding with Permanent Patterns SUBJECT: Technology 57. Permanent Pattern Moulding Exercise 1 There are six steps in the sand casting process. Put them in the right order. ____ a) Incorporate the pattern and sand in a gating system. ____ b) Remove the pattern. ____ c) Break away the sand mold and remove the casting. ____ d) Fill the mold cavity with molten metal. ____ e) Place a pattern in sand to create a mold. ____ f) Allow the metal to cool. Exercise 2 Click on the link below to watch the video ‘Sand Casting Process’ (2:27) and try to describe the process. Use the words and phrases from the box. Use present continuous. powder surface pattern foundry sand sieve tilt facing sand flask press firmly turn backing sand mould box fill install gating sand mixture core core box Example: The worker is powdering the surface of the bottom mould box. https://www.youtube.com/watch?v=szOwGvYO_Tc Key 1 1 e, 2 a, 3 b, 4 d, 5 f, 6 c 2 Sample answers: He is filling a sand mixture in the mould box. He is turning it upside down. He is powdering the surface of the top mould box and installing the gating He is powdering the surface of the pattern by foundry sand. He is sieving facing sand into the flask and pressing firmly to the pattern. He is filling the rest of the space in the flask by backing sand and pressing it. He is installing the gating. Dictionary English Pronunciation Czech alignment pin /əˈlʌɪnm(ə)nt pɪn/ spojovací kolík backing sand /ˈbakɪŋ sand/ výplňový písek clay /kleɪ/ jíl cope /kəʊp/ vršek formy cope box /kəʊp bɒks/ vrchní formovací rám core / kɔː(r)/ jádro core sand / kɔː(r) sand/ jádrový písek core setting / kɔː(r) ˈsɛtɪŋ/ zakládání jader drag /draɡ/ spodek formy drag box /draɡ bɒks/ spodní formovací rám drawing the pattern /ˈdrɔːɪŋ ðə ˈpat(ə)n / vyjímání modelu dry-sand mould /drʌɪ sand məʊld/ vysušená forma drying /ˈdrʌɪŋ/ sušení dusting, powdering /ˈdʌstɪŋ/ poprášení expendable mould /ɪkˈspɛndəb(ə)l məʊld/ netrvalá forma, jednorázová forma facing sand / ˈfeɪsɪŋ sand / modelový písek filler sand / ˈfɪlə sand/ výplňový písek green-sand mould /ɡriːn sand məʊld/ forma na syrovo hand moulding /hand ˈməʊldɪŋ/ ruční formování jolting, jolt ramming /ˈdʒəʊltɪŋ/, /dʒəʊlt ˈramɪŋ/ střásání machine moulding /məˈʃiːn ˈməʊldɪŋ/ strojní formování mould assembly /məʊld əˈsɛmbli/ skládání formy mould board /məʊld bɔːd/ formovací deska mould wash, mould coating /məʊld wɒʃ/, ˈkəʊtɪŋ/ moulding mixture /ˈməʊldɪŋ ˈmɪkstʃə/ formovací směs moulding / ˈməʊldɪŋ/ formování / məʊld nátěr formy English Pronunciation Czech parting dust /ˈpɑːtɪŋ dʌst/ dělicí prášek parting plane /ˈpɑːtɪŋ pleɪn/ dělicí rovina parting sand /ˈpɑːtɪŋ sand/ dělicí písek pattern / ˈpat(ə)n/ model permanent pattern /ˈpəːm(ə)nənt ˈpat(ə)n/ trvalý model pouring basin /pɔːrɪŋ ˈbeɪs(ə)n/ vtoková jamka punching of vent holes /pʌn(t)ʃɪŋ əv vɛnt həʊlz/ vytváření průduchů ramming / ˈramɪŋ/ pěchování riser /ˈrʌɪzə/ nálitek runner /ˈrʌnə/ vtokový kanál running system, gating system /ˈrʌnɪŋ ˈsɪstəm/, ˈsɪstəm/ rolling over (the mould) /ˈrəʊlɪŋ ˈəʊvə/ obrácení (formy) sand /sand/ písek sand mould /sand məʊld/ písková forma slingering /slɪngərɪŋ/ metání spraying /ˈspreɪɪŋ poprášení sprue / spruː/ vtok squeeze ramming, squeezing /skwiːz ˈramɪŋ/, /skwiːzɪŋ/ lisování whistler /ˈwɪslə/ výfuk /ɡeɪtɪŋ vtoková soustava Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Casting Defects Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s vadami odlitků. jazykový – Word order, reading Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 58 YEAR: 3 Casting Defects SUBJECT: Technology 58. Casting Defects Exercise 1 Put the words of the sentences 1-2 in to correct order. A casting perfect the meet all conditions technical must supply and 1 _______________________________________________________. defect It have any mustn’t 2 _______________________________________________________, i.e. a deviation in the appearance, shape, size, weight or structure. Causes of defects are mainly: inappropriate structure of the casting, inappropriate moulding material, incorrect gating, improper heat treatment etc. The following are the major defects, which are likely to occur in sand castings • Gas defects • Shrinkage cavities • Moulding material defects • Pouring metal defects • Mould shift Exercise 2 Read the following text and answer these questions. 1. When do scabs occur? 2. Who usually causes a core shift? 3. There is dirt in the cast metal. What kind of defect is it? Defects occurring during moulding: Scabs Scabs are rough, irregular projections on surface of castings containing embedded sand. Scabs occur when a portion on the face of mould or core lifts and metal flows underneath in a thin layer. Shift – set out of the centre (core shift) A core shift results from improper support or location of a core. It results in a faulty cavity or hole in the casting. This is due to operator error: not aligning the mold correctly. Most flasks have alignment pins to prevent this. Defects occurring during casting and solidification: Slag inclusions Inclusions are any foreign materials present in the cast metal. These may be in the form of oxides, slag, dirt, sand or nails. Blowholes (air holes, pinholes) Gas pockets come from gas dissolving in the melt then coming out (like shaking a can of pop) when it solidifies. Shrinkage cavity Shrinkage faults are faults caused by improper directional solidifications, poor gating and risering design and inadequate feeding.28 28 Defects In Casting - Molding Defects - Casting Defects And Remedies. Autofarm [online]. 2015 [cit. 2015-0604]. Dostupné z: http://autofarm.blogspot.cz/2012/07/defects-in-casting-molding-defects.html. Key 1 1 A perfect casting must meet all the technical and supply conditions. 2 It mustn’t have any defect, 2 1 When a portion on the face of mould or core lifts and metal flows underneath in a thin layer. 2 An operator. 3 Slag inclusions Dictionary English Pronunciation Czech blow hole, gas hole /bləʊ həʊl/, /gas həʊl/ bublina burn on /bəːn ɒn/ zapečenina casting casting defect cavity defect, /ˈkɑːstɪŋ/ odlitek foundry /ˈkɑːstɪŋ ˈdiːfɛkt/, /ˈfaʊndri vada odlitku ˈdiːfɛkt/ /ˈkavɪti/ dutina cold crack /kəʊld krak/ trhlina za studena, prasklina core shift / kɔː ʃɪft/ přesazení jádra crack /krak/ trhlina defect / ˈdiːfɛkt/ vada flash, fin /flaʃ/, / fɪn/ zatečenina hard spot /hɑːd spɒt/ zatvrdlina hot crack, hot tear / hot krak/, / hot tɛː/ trhlina za tepla internal defect /ɪnˈtəːn(ə)l ˈdiːfɛkt/ vnitřní vada mismatch /ˈmɪsmatʃ/ přesazení mould shift /məʊld ʃɪft/ přesazení formy offset casting /ˈɒfsɛt ˈkɑːstɪŋ/ přesazený odlitek orange peel /ˈɒrɪn(d)ʒ piːl/ pomerančová kůra pinhole /ˈpɪnhəʊl/ bodlina porosity /pɔːˈrɒsɪti/ pórovitost primary chill /ˈprʌɪm(ə)ri tʃɪl/ zákalka rough surface /rʌf ˈsəːfɪs/ drsný povrch shrinkage cavity /ˈʃrɪŋkɪdʒ ˈkavɪti/ staženina sand inclusion /sand ɪnˈkluːʒ(ə)n/ zadrobenina scab /skab/ strup slag blowhole, scum /slaɡ ˈbləʊhəʊl/, /skʌm/ zalitá struska, odvařenina surface defect / ˈsəːfɪs ˈdiːfɛkt/ vada povrchu rat tail /rat teɪl/ zálup run out /rʌn aʊt/ vytečení formy swell /swɛl/ vyboulenina Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Cleaning and Finishing of Castings Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s čištěním a úpravou odlitků. jazykový – Listening Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 59 Cleaning and Finishing of Castings SUBJECT: Technology 59. Cleaning and Finishing of Castings Exercise 1 Click on the link below to watch the video ‘Waupaca Foundry casting finishing automation’ (3:08) and decide whether these statements are true or false. Correct the false statement. 1. This advert is about Automated Trim Press. T F 2. First the casting is loaded onto the shaker. T F 3. The castings are inspected by shaker. T F 4. The first press cycle is the horizontal trim. T F https://www.youtube.com/watch?v=g54tpjnt4O4 Key 1 1 T, 2 T, 3 F (The castings are inspected by hand of the inspector.) 4 F (The first press cycle is the vertical trim.) Dictionary English Pronunciation Czech air chipper /ɛː blɑːstɪŋ/ pneumatický sekáč annealing / əˈniːlɪŋ/ žíhání automated trim press /ˈɔːtəmeɪtɪd trɪm prɛs/ automatický ostřihovací lis casting / ˈkɑːstɪŋ/ odlitek chisel / ˈtʃɪz(ə)l/ sekáč (ruční) cleaning of castings fettling / kliːnɪŋ əv ˈkɑːstɪŋz/, / čištění odlitků ˈfɛt(ə)lɪŋ/ core / kɔː(r)/ jádro hardening / ˈhɑːd(ə)nɪŋ/ kalení heat treatment / hiːt ˈtriːtm(ə)nt/ tepelné zpracování inspection / ɪnˈspɛkʃn/ kontrola knocking out, shaking out /ˈnɒkɪŋ aʊt/, /ˈʃeɪkɪŋ aʊt/ vytloukání odlitků press cycle / prɛs ˈsʌɪk(ə)l/ cyklus lisování pressing out / prɛs aʊt/ vytlačování odlitků removing the core / rɪˈmuːvɪŋ ðə kɔː(r)/ odstranění jádra repair / rɪˈpɛː/ oprava surface cleaning / ˈsəːfɪs kliːnɪŋ/ čištění povrchu trimming / ˈtrɪmɪŋ/ ostřihování odlitku, ostřihování zateklin tumbling / ˈtʌmb(ə)lɪŋ/ omílání v bubnu tumbling barrel / ˈtʌmb(ə)lɪŋ ˈbar(ə)l/ bubnová čistička wire brushing / wʌɪə ˈbrʌʃɪŋ/ kartáčování drátěným kartáčem shot blasting /ʃɒt ˈblɑːstɪŋ/ otryskávání shot blasting machine /ʃɒt ˈblɑːstɪŋ məˈʃiːn/ tryskač Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Vacuum and Shell Moulding, Centrifugal Casting Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s vakuovým a skořepinovým formováním a odstředivým litím. jazykový – Passives, vocabulary Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 60 Vacuum and Shell Moulding, Centrifugal Casting SUBJECT: Technology 60. Vacuum and Shell Moulding, Centrifugal Casting Exercise 1 Read the following text and answer the questions below. Centrifugal casting is a method of casting parts having axial symmetry. The method involves pouring molten metal into a cylindrical mold spinning about its axis of symmetry. The mold is kept rotating till the metal has solidified. As the mold material steels, Cast irons, Graphite or sand may be used. The rotation speed of centrifugal mold is commonly about 1000 RPM (may vary from 250 RPM to 3600 RPM). 29 1. What material can be used as the mold? 2. What is common rotation speed of centrifugal mold? 3. How long is the mold kept rotating? 29 Centrifugal casting. SubsTech [online]. 2015 [cit. 2015-06-04]. Dostupné z: http://www.substech.com/dokuwiki/doku.php?id=centrifugal_casting. Exercise 2 Match the Czech terms to the English. 1. horizontal a) svislé 2. vertical b) licí žlábek 3. ladle c) vodorovné 4. mold d) pánev 5. melted metal e) roztavený kov 6. runner f) forma Key 1 1 Steel, cast iron, graphite or sand. 2 About 1000 RPM. 3 Till the metal has solidified. 2 1 c, 2 a, 3 d , 4 f, 5 e, 6 b Dictionary English Pronunciation Czech axis /ˈaksɪs/ osa cast iron /kɑːst ˈʌɪən/ litina casting / ˈkɑːstɪŋ/ odlitek casting / ˈkɑːstɪŋ/ odlévání centrifugal casting / ˌsɛntrɪˈfjuːg(ə)l ˈkɑːstɪŋ / odstředivé lití, odstředivě litý odlitek centrifugal force / ˌsɛntrɪˈfjuːg(ə)l fɔːs/ odstředivá síla cooling /ˈkuːlɪŋ/ chladnutí cope / kəʊp/ horní část formy curing /ˈkjʊərɪŋ/ vytvrzení drag / drag/ spodní část formy flask / flɑːsk/ formovací rám heating /ˈhiːtɪŋ/ ohřev horizontal centrifugal casting /hɒrɪˈzɒnt(ə)l ˌsɛntrɪˈfjuːg(ə)l odstředivé lití, vodorovné ˈkɑːstɪŋ/ ladle /ˈleɪd(ə)l/ licí pánev permanent mould /ˈpəːm(ə)nənt məʊld/ trvalá forma plastic sheet, plastic film / ˈplastɪk ʃiːt/, / ˈplastɪk fɪlm/ plastová folie resin / ˈrɛzɪn/ pryskyřice rotating mould /rə(ʊ)ˈteɪtɪŋ ˈməʊld/ otáčející se forma runner /ˈrʌnə/ vtokový kanál shell /ʃɛl/ skořepina shell casting /ʃɛl ˈkɑːstɪŋ/ lití do skořepinových forem, skořepinový odlitek shell mould /ʃɛl ˈməʊld/ skořepinová forma shell moulding /ʃɛl ˈməʊldɪŋ/ skořepinové formování solidify / səˈlɪdɪfʌɪ/ tuhnout steel /stiːl/ ocel vacuum casting /ˈvakjuːm ˈkɑːstɪŋ/ vakuové lití vacuum forming, vacuum moulding /ˈvakjuːm ˈfɔːmɪŋ/, /ˈvakjuːm vakuové formování məʊldɪŋ/ /ˈvəːtɪk(ə)l ˌsɛntrɪˈfjuːg(ə)l odstředivé lití svislé ˈkɑːstɪŋ/ vertical centrifugal casting Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Moulding with Expendable Patterns Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s formováním s jednorázovými modely. jazykový – Present perfect, reading Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 61 Moulding with Expendable Patterns SUBJECT: Technology 61. Moulding with Expendable Patterns Exercise 1 Click on the link below to read the article ‘Expendable mold casting’ and answer these questions. 1. What kind of moulding does expendable mould casting include? 2. What type of casting has been used for centuries? 3. What is the other benefit to sand casting except a low cost? 4. Is it possible to recycle sand? 5. What other kinds of casting are similar to sand casting? 6. What is the one advantage of investment casting? http://www.americanbronze.com/expandable-mold-casting.html Key 1 1 Sand, plastic, shell, plaster, and investment (lost-wax technique) mouldings. 2 Sand casting. 3 Very small size operations. 4 Yes, it is. Many times. 5 Plaster casting and shell moulding. 6 The wax can be reused. Dictionary English Pronunciation Czech burnt pattern /bɜːnt ˈpat(ə)n/ ceramic coating /sɪˈramɪk ˈkəʊtɪŋ/ spalitelný model vypařitelný model keramický povlak ceramic shell /sɪˈramɪk ʃɛl/ keramická skořepina expendable pattern /ɪkˈspɛndəb(ə)l ˈpat(ə)n/ full mould /fʊl məʊld/ jednorázový model forma pro lití na spalitelný (vypařitelný) model full-mould casting, evaporative-pattern casting, burnt-pattern casting, lost foam casting investment casting, (lost-wax casting) /fʊl məʊld ˈkɑːstɪŋ/, /ɪˈvap(ə)rətɪv ˈpat(ə)n ˈkɑːstɪŋ/, /bɜːnt ˈpat(ə)n ˈkɑːstɪŋ/, /lɒst fəʊm ˈkɑːstɪŋ/ /ɪnˈvɛs(t)m(ə)nt ˈkɑːstɪŋ/, /lɒst waks ˈkɑːstɪŋ/ investment mould /ɪnˈvɛs(t)m(ə)nt məʊld/ investment pattern /ɪnˈvɛs(t)m(ə)nt ˈpat(ə)n/ moulding moulding with expendable pattern polystyrene pattern, foam pattern /ˈməʊldɪŋ/ /ˈməʊldɪŋ wɪð ɪkˈspɛndəb(ə)l ˈpat(ə)n/ /ˌpɒlɪˈstʌɪriːn ˈpat(ə)n/, / fəʊm ˈpat(ə)n/ formování formování s jednorázovým modelem plastic /ˈplastɪk/ plast polystyrene foam /ˌpɒlɪˈstʌɪriːn fəʊm/ polystyrenová pěna precision casting /prɪˈsɪʒ(ə)n ˈkɑːstɪŋ/ refractory baking material /rɪˈfrakt(ə)ri ˈbeɪkɪŋ məˈtɪərɪəl/ sand casting /sand ˈkɑːstɪŋ/ přesné lití žáruvzdorný zasypávací materiál (pro lití na vytavitelný model) lití do pískové formy sand mould /sand məʊld/ písková forma shell mould /ʃɛl məʊld/ tree, pattern assembly /triː/ , /ˈpat(ə)n əˈsɛmbli/ vaporize /ˈveɪpərʌɪz/ skořepinová forma stromeček, modelová sestava (pro lití na vytavitelný model) vypařit se wax /waks/ vosk wax pattern /waks ˈpat(ə)n/ voskový model lití na spalitelný model, lití na vypařitelný model lití na vytavitelný model, (lití na ztracený vosk) forma pro lití na vytavitelný model vytavitelný model polystyrenový model Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Permanent-Mould Casting Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s odléváním do trvalých forem. jazykový – Present simple, preposition Pomůcky: PC, dataprojektor, interaktivní tabule WORKSHEET NO. 62 YEAR: 3 Permanent-Mould Casting SUBJECT: Technology 62. Permanent-Mould Casting Exercise 1 Complete the text with the words from the box. a) reusable f) from b) uses g) on c) include h) in i) are d) mould e) is j) to Permanent 1___________ casting 2___________ metal casting process that employs 3_____________ moulds ("permanent moulds"), usually made 4_____________ metal. The most common process 5____________ gravity 6_____________ fill the mould, however gas pressure or a vacuum 7_____________ also used. A variation 8_____________ the typical gravity casting process, called slush casting, produces hollow castings. Common casting metals are aluminium, magnesium, and copper alloys. Other materials include tin, zinc, and lead alloys and iron and steel are also cast 9____________ graphite moulds. Typical parts 10_____________ gears, splines, wheels, gear housings, pipe fittings, fuel injection housings, and automotive engine pistons30 30 Permanent mold casting. Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Permanent_mold_casting. Key 1 1 d, 2 e, 3 a, 4 f, 5 b, 6 i, 7 j, 8 g, 9 h, 10 c Dictionary English Pronunciation Czech automotive engine pistons /ˌɔːtəˈməʊtɪv ˈɛndʒɪn ˈpɪst(ə)ns/ písty automobilových motorů centrifugal casting / ˌsɛntrɪˈfjuːg(ə)l ˈkɑːstɪŋ/ odstředivé lití cold chamber /kəʊld ˈtʃeɪmbə/ studená komora cold-chamber die-casting machine /kəʊld ˈtʃeɪmbə dʌɪ ˈkɑːstɪŋ stroj pro tlakové lití se məˈʃiːn/ studenou komorou continuous casting / kənˈtɪnjʊəs ˈkɑːstɪŋ / plynulé lití, kontinuální lití continuous casting machine / kənˈtɪnjʊəs ˈkɑːstɪŋ məˈʃiːn/ zařízení pro plynulé odlévání (ZPO) cooling chamber / kuːlɪŋ ˈtʃeɪmbə/ chladicí komora curve type continuous casting (radial) /kəːv tʌɪp kənˈtɪnjʊəs ˈkɑːstɪŋ vertikální plynulé lití se (ˈreɪdɪəl)/ zakřivením (radiální) die /dʌɪ/ die casting, pressure die casting /dʌɪ ˈkɑːstɪŋ/, /ˈprɛʃə dʌɪ tlakové lití ˈkɑːstɪŋ/ ejector / ɪˈdʒɛktə/ vyhazovač gear /ɡɪə/ ozubené kolo gear housing /ɡɪə haʊzɪŋ/ převodovka gravity casting /ˈɡravɪti ˈkɑːstɪŋ/ tlakové gravitační lití horizontal centrifugal casting /hɒrɪˈzɒnt(ə)l ˌsɛntrɪˈfjuːɡ(ə)l horizontální odstředivé lití ˈkɑːstɪŋ / hot chamber /hɒt ˈtʃeɪmbə/ hot-chamber die-casting machine /hɒt ˈtʃeɪmbə dʌɪ ˈkɑːstɪŋ stroj pro tlakové lití s teplou məˈʃiːn / komorou ingot /ˈɪŋɡət/ ingot ingot casting /ˈɪŋɡət ˈkɑːstɪŋ/ odlévání ingotů ingot mould, metal mould /ˈɪŋɡət məʊld/, məʊld/ injection /ɪnˈdʒɛkʃ(ə)n/ vstřikování mould /məʊld krystalizátor (forma pro plynulé lití) permanent mould / ˈpəːm(ə)nənt məʊld/ trvalá forma permanent-mould casting / ˈpəːm(ə)nənt məʊld ˈkɑːstɪŋ/ lití do trvalých forem kovová forma pro tlakové lití teplá komora /ˈmɛt(ə)l kokila English Pronunciation Czech pipe fittings /pʌɪp ˈfɪtɪŋs/ spojovací součásti potrubí precision casting /prɪˈsɪʒ(ə)n ˈkɑːstɪŋ/ přesné lití pressure chamber / ˈprɛʃə ˈtʃeɪmbə/ tlaková komora rotating mould /rə(ʊ)ˈteɪtɪŋ məʊld/ forma na odstředivé lití tundish / ˈtʌndɪʃ/ mezipánev two-part mould /tuː pɑːt məʊld/ dvoudílná forma vertical centrifugal casting vertical continuous casting vertical continuous casting with bending / ˈvəːtɪk(ə)l ˌsɛntrɪˈfjuːɡ(ə)l ˈkɑːstɪŋ / / ˈvəːtɪk(ə)l kənˈtɪnjʊəs ˈkɑːstɪŋ/ / ˈvəːtɪk(ə)l kənˈtɪnjʊəs ˈkɑːstɪŋ wɪð bendɪŋ/ vertikální odstředivé lití vertikální plynulé lití vertikální plynulé lití s ohybem Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Materials for Castings Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s materiály na odlitky. jazykový – Questions, speaking Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 63 Materials for Castings SUBJECT: Technology 63. Casting Materials Exercise 1 Read the following text and make questions to each sentence. Then ask and answer the questions in pairs. Casting materials are usually metals or various cold setting materials. 1 ______________________________________________________ The examples are epoxy, concrete, plaster and clay.31 2 ______________________________________________________ Cast iron is iron or a ferrous alloy which has been heated until it liquefies. 3 ______________________________________________________ Then it is poured into a mould to solidify. 4 ______________________________________________________ It is usually made from pig iron. 5 ______________________________________________________ Grey cast iron is characterised by its graphitic microstructure, which causes fractures of the material to have a grey appearance. 31 Casting. Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Casting. 6 ______________________________________________________ It is the most commonly used cast iron and the most widely used cast material based on weight. 7 ______________________________________________________ White cast iron displays white fractured surface due to the presence of cementite. 8 ______________________________________________________ Malleable iron starts as a white iron casting that is then heat treated at about 900 °C. 9 ______________________________________________________ A more recent development is nodular or ductile cast iron. 10 ______________________________________________________ The properties are similar to malleable iron, but parts can be cast with larger sections. 32 11 ______________________________________________________ 32 Cast iron. Wikipedia: The Free Encyklopedia [online]. 2015 [cit. 2015-06-04]. Dostupné z: https://en.wikipedia.org/wiki/Cast_iron. Key 1 Sample answers: 1 What are casting materials? 2 What are the examples of casting materials? 3 What is cast iron? 4 Where is it poured then? 5 What is it usually made from? 6 What is grey cast iron characterized by? 7 Is it the most commonly used cast iron? 8 What does white cast iron display? Dictionary English Pronunciation Czech alloy / ˈalɔɪ/ slitina alloyed cast iron / ˈalɔɪd kɑːst ˈʌɪən/ legovaná litina aluminium / al(j)ʊˈmɪnɪəm/ hliník aluminium alloy, aluminium- / al(j)ʊˈmɪnɪəm ˈalɔɪ/, based alloy al(j)ʊˈmɪnɪəm beɪstˈalɔɪ/ / slitina hliníku brass / brɑːs/ bronz bronze /brɒnz/ bronz cast iron / kɑːst ˈʌɪən/ litina cast steel / kɑːst stiːl/ ocel na odlitky, litá ocel castability /kɑːstəˈbɪlɪti/ slévatelnost clay /kleɪ/ jíl cold setting materials /kəʊld ˈsɛtɪŋ məˈtɪərɪəls/ materiály tvrdnoucí za studena concrete /ˈkɒŋkriːt/ beton copper / ˈkɒpə/ měď copper alloy, copper-based / ˈkɒpə ˈalɔɪ/, alloy beɪstˈalɔɪ/ / ˈkɒpə slitina mědi fluidity /fluːˈɪdɪti/ gray cast iron, grey cast iron /ɡreɪ kɑːst ˈʌɪən/, /ɡreɪ kɑːst šedá litina ˈʌɪən/ liquefy /ˈlɪkwɪfʌɪ/ roztavit se magnesium / magˈniːzɪəm/ hořčík malleable cast iron / ˈmalɪəb(ə)l kɑːst ˈʌɪən/ temperovaná litina nickel /ˈnɪk(ə)l/ nikl nickel alloy alloy, nickel-based /ˈnɪk(ə)l ˈalɔɪ/, beɪstˈalɔɪ/ zabíhavost /ˈnɪk(ə)l slitina niklu nodular iron /ˈnɒdjuːlə ˈʌɪən/ tvárná litina non-ferrous alloy /nɒn ˈfɛrəs ˈalɔɪ/ slitina neželezných kovů non-ferrous metal /nɒn ˈfɛrəs ˈmɛt(ə)l/ neželezný kov pig iron /pɪg ˈʌɪən/ surové železo plaster /ˈplɑːstə/ sádra English Pronunciation Czech plastic /ˈplastɪk/ plast solidify /səˈlɪdɪfʌɪ/ ztuhnout steel /stiːl/ ocel unalloyed cast iron /ʌnəˈlɔɪd kɑːst ˈʌɪən/ nelegovaná litina white cast iron / wʌɪt kɑːst ˈʌɪən/ bílá litina zinc / zɪŋk/ zinek zinc alloy, zinc-based alloy /zɪŋk ˈalɔɪ/, /zɪŋk beɪstˈalɔɪ/ slitina zinku Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji Číslo projektu: CZ.1.07/1.1.00/44.0008 Téma: Technological Principles in Casting Design Účel: materiál pro výuku metodou CLIL Předmět: TECHNOLOGIE Cílová skupina: 3.ročník oboru Mechanik strojů a zařízení Jazyková úroveň: A2-B1 Časová dotace: část vyučovací hodiny Cíle aktivity: obsahový – Seznámení s technologickými zásadami pro návrh odlitku. jazykový – Word order, should, must Pomůcky: PC, dataprojektor, interaktivní tabule YEAR: 3 WORKSHEET NO. 64 Technological Principles in Casting Design SUBJECT: Technology 64. Technological Principles in Casting Design Exercise 1 Change the order of the words to make correct sentences. simple should and The shapes casting a have smooth 1______________________________________________________. have casting The edges not and sharp should angles 2______________________________________________________. choose is to suitable It the material important for casting 3______________________________________________________. be that internal does cause stress crazing must The casting designed so not 4______________________________________________________. Key 1 1 The casting should have a smooth and simple shapes. 2 The casting should not have sharp angles and edges. 3 It is important to choose suitable material for the casting. 4 The casting must be designed so that internal stress does not cause crazing. Dictionary English Pronunciation Czech allowance /əˈlaʊəns / přídavek machining allowance /məˈʃiːnɪŋ əˈlaʊəns/ přídavek na obrábění shrinkage allowance /ˈʃrɪŋkɪdʒ əˈlaʊəns/ přídavek na smrštění angle / ˈaŋg(ə)l/ úhel avoid /əˈvɔɪd/ vyhnout se, vyvarovat se castability /kɑːstəˈbɪlɪti/ slévatelnost casting / ˈkɑːstɪŋ/ odlitek chill /tʃɪl/ chladítko design principle /dɪˈzʌɪn ˈprɪnsɪp(ə)l/ konstrukční pravidlo dimensional tolerances /dɪˈmɛnʃ(ə)n(ə)l ˈtɒl(ə)r(ə)nsɪz/ tolerance rozměrů draft, taper /drɑːft/, /ˈteɪpə/ formovací úkos fillet /ˈfɪlɪt/ zaoblení loose piece /luːs piːs/ volná část, část na snímání minimum wall thickness /ˈmɪnɪməm wɔːl ˈθɪknəs/ minimální tloušťka stěny parting line /ˈpɑːtɪŋ lʌɪn/ dělicí rovina riser /ˈrʌɪzə/ nálitek section thickness /ˈsɛkʃ(ə)n ˈθɪknəs/ tloušťka průřezu sharp corner /ʃɑːp ˈkɔːnə/ ostrý roh shrinkage / ˈʃrɪŋkɪdʒ/ smrštění simple shape /ˈsɪmp(ə)l ʃeɪp/ jednoduchý tvar solidification /səlɪdɪfɪˈkeɪʃ(ə)n/ tuhnutí stress concentration /strɛs kɒns(ə)nˈtreɪʃ(ə)n/ koncentrace napětí surface roughness /ˈsəːfɪs ˈrʌfnɛs/ drsnost povrchu thickness / ˈθɪknəs/ tloušťka uniform thickness /ˈjuːnɪfɔːm ˈθɪknəs/ stejnoměrná tloušťka
Podobné dokumenty
Technický slovník pro strojní odbory
Název projektu: Podpora přírodovědného a technického vzdělávání v Moravskoslezském kraji (NatTech MSK) Číslo projektu:
Více