Měření kvality pokrytí a služeb

Transkript

Nemo Handy / Scanner /Invex II
DRT4311B/ DRT4302
Anritsu MA8100A-00x In-building Coverage Mapping with TRX NEON Signal Mapper
For use with all Anritsu Handheld
instruments with spectrum analyzer
mode using channel power :
LMR Master™
Spectrum Master™
Site Master™
BTS/Cell Master™
VNA Master™
Anritsu MA8100A-00x In-building Coverage Mapping with TRX NEON Signal Mapper
•Eliminating the need to manually perform"check-ins" at each
test point by automatically calculating indoor location
• Providing vastly more data than is possible with manual
processes by recording data with every step
• Removing typical data recording errors caused by
"guesstimating" locations in large buildings through automatic
indoor location and path estimation
• Delivering actionable data in areas not easily analyzed such as
stairways and elevators by recording and referencing
measurements in 3D
Nemo Handy
Nemo Handy-A with
Samsung Galaxy S6
Nemo Handy-A with Samsung
Galaxy Note 10.1 2014 edition
Supports GSM/WCDMA/HSPA/HSPA+/LTE/WiFi measurements
Application testing with scripts
Automated testing
Comprehensive real-time voice quality testing based on POLQA and
PESQ
Forcing commands for system, band, LTE PCI and preferred carrier
lock (UMTS)*
Indoor map with markers and geodetic coordinates (support e.g. for
iBwave maps)
Live outdoor map with base station overlay
Notifications on the map and graphs
HTML testing with real web browser
Direct upload of log files to an FTP server
LTE/CDMA dual radio support
Support for Voice over Wi-Fi, Video over Wi-Fi, Video over LTE
User interface:
Page splits displaying several views
Custom page building
Bar graphs, line graphs, numerical
views
Indoor map
Outdoor map
Real-time statistics
SAMSUNG GALAXY CORE LTE SM-G386F WITH BROADCOM CHIPSET
Nemo Handy-A now supports Samsung Galaxy Core LTE SM-G386F with Broadcom chipset,
including extensive forcing features:
System lock
Band lock
Cell barring
Channel (ARFCN) lock in GSM
Carrier (UARFCN) and scrambling code lock in UMTS
Carrier (EARFCN) and PCI lock in LTE
For controlling handovers: Measurement suppression (to
prevent handovers)
Measurement biasing (for assisted handovers)
Nemo Handy-A, QUALCOM CHIPSET
Voice Quality Testing (POLQA and PESQ) Uplink and
downlink
SWB (SuperWideband) and NB (Narrowband) POLQA
measurement modes
Can be performed between two Nemo Handy‐A terminals
or between a terminal and Nemo Server
Real-time calculation of voice quality score (MOS) for
POLQA, individual MOS scores are displayed during the call
Handy-A VoLTE Views Voice MOS and SIP Signaling
Iperf for TCP/UDP Iperf was developed as a modern alternative
for measuring TCP and UDP bandwidth performance.
PLAYBACK
NEMO Walker Air
Centralized control of Slave units from the Master
Synchronized time and start/stop measurements
Synchronized script events
Status display of all units
Indoor marker sharing to Slaves
Master does not measure or perform scripts
●Supports all the same testing functionalities as Nemo
Handy-A, including VQ POLQA and PESQ
NEMO Walker Air
Monitor the status of all Slaves on real time Script status
Battery status
Real-time success rates for transactions
User-defined KPIs
●Full control of Slaves Connect/disconnect Slaves
Define measurement scripts
Set device labels (free-form text describing the device,
saved to logfile)
Control logfile upload of the Slaves
NEMO Walker Air
Floor plan is loaded into the Master device
Waypoints are placed on the floor plan during
the measurements
Waypoints are embedded on the Slave logfiles
automatically to provide location information
NEMO Walker Air
3x10,000mAh Verbatim USB battery back
●Runtime of the complete system: 10 h
●One 12/220/110v charging cable for the whole system
NEMO FSR1
•Features two plug-in modular RF down converters (DC)
•Down converters available in many frequency band
configurations
•Up to eight bands in a single receiver
•Down converters can be quickly and easily changed in the
field
Bands and technologies are independent
•Technologies supported: LTE, WCDMA, GSM, CDMA, and
EVDO
•Technologies can be added remotely with license upgrades
NEMO FSR1 Down Corventers
NEMO FSR1
NEMO Invex II
NEMO Invex II
Simultaneous testing of max 50 test devices 29
smartphones OR 50 modems (or combinations) AND 3
scanners
Benchmark more with less HW simultaneously all
technologies up to LTE-A and beyond, enables test of
multiple technologies with one drivetest
Better performance - Higher test device density per system
Designed for testing/benchmarking high datarates LTE
category 6 and beyond
Support for current and future MIMO devices
With Low power consumption per test device
Future proof - for LTE-A and beyond
NEMO Outdoor
Provides measurement
results for network
– Roll-out
– Tuning
– Verification
– Optimization
– Maintenance,
– Benchmarking
Supports more than 300 test terminals and scanners
Currently supporting LTE/LTA-A
(FDD/TDD, carrier aggregation), HSPA+
DC, WCDMA, GSM, 1xEV-DO, CDMA,
iDEN, WiMAX, TD-SCDMA, and TETRA
NEMO Outdoor
LATEST SUPPORTED TERMINALS
• Latest supported
handsets:
– Samsung Galaxy S6
SM-G920A (AT&T)
SM-G920F (EMEA)
SM-G920I (APAC)
SM-G920T (T-Mobile)
SM-G920W8 (Bell)
NEMO Outdoor
A compact and cost-effective benchmarking
solution for use with Nemo Outdoor
• Simultaneous multi-data testing with a single laptop (Patented)
• Possibility to measure up to six networks
• Supports more than 300 test devices, mix & match, including Samsung, Motorola,
Qualcomm, and HiSilicon-based terminals and USB modems
• Supports any combination of technologies ranging from GSM to HSPA+, CDMA
2000, and TD-SCDMA to EV-DO and LTE/LTE-A
NEMO Outdoor
Nemo Outdoor enables network operators to test their
network using the same application protocols as their
customers, providing results that correspond with the end user experience
NEMO Outdoor
NEMO Outdoor
Carrier aggregation (CA) is
used in LTE-Advanced in order to increase the
bandwidth, and consequently, the bitrates
● LTE CA measurements with Nemo Outdoor provide
detailed information about the primary and secondary
component carriers, for example:
– Cell type
– PCI
– CFI
– Band
– Bandwidth
– Link adaptation
– Radio resource allocation
NEMO Outdoor
Nemo Outdoor collects all key VoLTE Performance &
Quality KPIs
● Qualcomm and Samsung VoLTE clients are supported
– VoLTE implementation is a terminal firmware and an
operator specific
● VoLTE Test Cases:
– Call accessibility
– Call retainability
– Voice Quality: POLQA
– SRVCC (Single Radio Voice Call Continuity calls)
● SRVCC= Single Radio Voice Call Continuity
● Inter-system handover from LTE during VoLTE call
SRVCC interruption time calculated from signalling:100ms
– User plane interruption time higher, ~200-300ms
– Avg MOS during SRVCC: 1.7
– Avg MOS during normal: 3.7
● Key KPIs available also in Nemo Outdoor
VOLTE SRVCC & VOICE QUALITY
● ~200ms audio
interruption
● degraded MOS score
4302A+ Wireless Test Transmitter
• Support for CW, GSM, and WCDMA protocols covering all
appropriate bands. Upgradeable to support CDMA.
•Base station broadcast signals with user
settable channel and message parameters.
• Cell output recognizable by both mobile
terminals and measurement receivers
RF power output settable up to +21 dBm.
• External LED and software interface
indicators for transmit mode status.
• Bundled with Nome GUI and web-based inter face.
NEMO Wind Catcher
Nemo WindCatcher is a desktop-based Radio Access Network (RAN) postprocessing and analysis solution commercially deployed since 2003
• Supports all major technologies: LTE, GSM/UMTS/HSPA+, CDMA/EVDO,
WiMAX, iDEN, WiFi.
• Provides layer 3 drilldown, PCAP (TCP/IP, SIP, RTP) and layer 2/layer 1
message extraction.
• Features include: site/cluster/system acceptance, online maps, user
defined events/reports, delta analysis, troubleshooting metrics.
• Modules include: Automation, VoLTE, PTT, DAS and Small Cell Module.
NEMO Wind Catcher DRIVE DATA FORMAT SUPPORT
1. Nemo Outdoor, Handy
2. TEMS Investigation, Pocket, Automatic
3. JDSU RAN Advisor (E6474), Truesite (FTA)
4. Swissqual Diversity, Qualipoc
5. Verizon DataPro
6. Accuver XCAL
7. Qualcomm QXDM
8. Anritsu LinkMaster
9. ZK Cell test SAM
10.PCTel SeeHawk, SeeGull Scanners
11.DingLi Pioneer
12.Genex Probe
13.MCEM
14.RTM/Broadcom (Nokia)
15.Sequans (LTE TDD)
16.Altair (LTE TDD/FDD)
17.HiSilicon (LTE TDD)
NEMO Wind Catcher Licencing structure
NEMO WindCatcher KEY USE CASES
NEMO WindCatcher
Efficient
• Multi-Core Processing
• Automated device and file merging
• Ability to process large volumes of data (Sqlite DB)
• Numerous productivity features
• Batch printing
• Delta analysis
• Link to Bin with Replay.
• Comprehensive Set Metrics of Metrics and Events
• Built-in and User Defined Metrics
• WindCatcher Independent Events based on call flow
modeling (user definable)
• Vendor Reported Events
NEMO WindCatcher
Flexibility and In-depth Analysis
• Fully customizable root cause analysis and before/after
summaries
• One-step throughput analysis
• User defined metrics and reports
• Neighbor List
• Analysis Pilot
• Pollution Analysis
• RF Analysis
NEMO WindCatcher
Reporting
• Comprehensive Set of Built-in reports
• Acceptance
• Pre/Post Performance
• Throughput Analysis
• Troubleshooting
• Fully Customizable Reports by end users
• Maps
• Charts
• Statistics
• Excel-based with no programming required

Měření kvality pokrytí a služeb

Transkript

Podobné dokumenty

Tisknout

Prodej - RE/MAX Ireland

terms and conditions

product description