WIMA FKP 1

Transkript

WIMA FKP 1

D
WIMA FKP 1
Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil
Electrodes, Schoopage Contacts, Double-Sided Metallization and Self-Healing
Internal Series Connection for Highest Current Carrying Capability
PCM 15 mm to 37.5 mm
Special Features
Electrical Data
˜ Extremely high pulse duty
˜Self-healing
˜ Internal series connection
˜ Very low dissipation factor
˜ Negative capacitance change
versus temperature
˜ According to RoHS 2011/65/EU
Typical Applications
For high pulse and high frequency
applications e.g.
˜ Switch mode power supplies
˜ Converters in drives and power
electronics
˜ Deflection systems in monitors
and TV-sets
˜ Electronic ballasts
Construction
Dielectric:
Polypropylene (PP) film
Capacitor electrodes:
Aluminium foil and double-sided metallized
plastic film
Internal construction:
Plastic film
Metal foil electrode
Electrode carrier
plastic film metallized
on both sides
Metal contact layer
(schoopage)
Terminating wire
Dissipation factors at +20+ C: tan d
at f
C0.1 mF0.1 mF P C  0.22 mF
1 kHz 3 x 10-4
 3 x 10-4
-4
10 kHz  4 x 10
 6 x 10-4
100 kHz 10 x 10-4–
Dielectric absorption:
0.05 %
Voltage derating:
A voltage derating factor of 1.35 % per K
must be applied from +85+ C for DC
voltages and from +75+ C for AC
voltages
Reliability:
Operational life  300 000 hours
Failure rate  1 fit (0.5 x U r and 40+ C)
Capacitancemax. pulse rise time V/msec at T A < 40) C
pF/mF
400 VDC 630 VDC 1000 VDC 1250 VDC 1600 VDC 2000 VDC 4000 VDC 6000 VDC
100 ... 220 ––––
56000
56000
––
330 ... 680 ––––
51000
56000
56000
56000
1000 ... 2200 2900029000290002900046000510005100051000
3300 ... 6800
900014000270002900029000290002900029000
0.01 ... 0.022
900011000110001100011000130001300013000
0.033 ... 0.068
90001100011000110001100011000 –
–
0.1 ... 0.22 7000 11000 11000 11000 11000
–
–
–
for pulses equal to the rated voltage
Mechanical Tests
Pull test on pins:
d T 0.8 l: 10 N in direction of pins
d > 0.8 l: 20 N in direction of pins
according to IEC 60068-2-21
Vibration:
6 hours at 10 ... 2000 Hz and 0.75 mm
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2
in accordance with IEC 60068-2-29
Packing
Available taped and reeled up to and
including case size 15 x 26 x 31.5 /
PCM 27.5 mm.
Detailed taping information and graphs
at the end of the catalogue.
For further details and graphs please
refer to Technical Information.
02.14
Encapsulation:
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Terminations:
Tinned wire.
Marking:
Colour: Red. Marking: Black.
Epoxy resin seal: Yellow
Capacitance range:
100 pF to 0.22 mF (E12-values on request)
Rated voltages:
400 VDC, 630 VDC, 1000 VDC, 1250 VDC,
1600 VDC, 2000 VDC, 4000 VDC, 6000 VDC
Capacitance tolerances:
±20%, ±10%, ±5% (other tolerances are
available subject to special enquiry)
Operating temperature range:
–55+ C to +100+ C
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20+ C:
C T 0.1 mF:  1 x 10 5 M¸
(mean value: 5 x 10 5 M¸)
C  0.1 mF:  30 000 sec (M¸ x mF)
(mean value: 100 000 sec)
Measuring voltage: 100 V/1 min.
Test voltage:
2 U r, 2 sec / 6 kV: 1.6 Ur, 2 sec.
Maximum pulse rise time:
66
D
WIMA FKP 1
Continuation
General Data
Capacitance
1000
1500
2200
3300
4700
6800
W
pF 5 „ 5 „ 5 „ 5 „ 5 „ 5 H
11 11 11 11 11 11 400 VDC/250 VAC*
L PCM**
Part number
18 18 18 18 18 18 15 15 15 15 15 15 W
FKP1G011004B00_ _ _ _ 5 FKP1G011504B00_ _ _ _ 5 FKP1G012204B00_ _ _ _ 5 FKP1G013304B00_ _ _ _ 5 FKP1G014704B00_ _ _ _ 5 FKP1G016804B00_ _ _ _ 6 H
11 11 11 11 11 12.5
630 VDC/400 VAC*
L PCM**
Part number
18 18 18 18 18 18 15 15 15 15 15 15 FKP1J011004B00_ _ _ _
FKP1J011504B00_ _ _ _
FKP1J012204B00_ _ _ _
FKP1J013304B00_ _ _ _
FKP1J014704B00_ _ _ _
FKP1J016804C00_ _ _ _
0.01 mF 5 11 18 15 FKP1G021004B00_ _ _ _ 7 14 18 15 FKP1J021004D00_ _ _ _
5 14 26.5 22.5 FKP1J021005A00_ _ _ _
0.015 „ 6 12.5 18 15 FKP1G021504C00_ _ _ _ 8 15 18 15 FKP1J021504F00_ _ _ _
6 15 26.5 22.5 FKP1J021505B00_ _ _ _
0.022 „ 7 14 18 15 FKP1G022204D00_ _ _ _ 7 16.5 26.5 22.5 FKP1J022205D00_ _ _ _
5 14 26.5 22.5 FKP1G022205A00_ _ _ _
0.033 „ 8 15 18 15 FKP1G023304F00_ _ _ _
8.518.526.522.5FKP1J023305F00_ _ _ _
6 15 26.5 22.5 FKP1G023305B00_ _ _ _
0.047 „ 7 16.5 26.5 22.5 FKP1G024705D00_ _ _ _ 10.520.526.522.5FKP1J024705H00_ _ _ _
9 19 31.5 27.5 FKP1J024706A00_ _ _ _
0.068 „
8.518.526.522.5FKP1G026805F00_ _ _ _
11 21 31.5 27.5 FKP1J026806B00_ _ _ _
9 19 41.5 37.5 FKP1J026807A00_ _ _ _
0.1 mF 10.520.526.522.5FKP1G031005H00_ _ _ _
9 19 31.5 27.5 FKP1G031006A00_ _ _ _
0.15 „
11 21 31.5 27.5 FKP1G031506B00_ _ _ _
0.22 „
13 24 31.5 27.5 FKP1G032206D00_ _ _ _
Capacitance
W
H
1000 VDC/600 VAC*
L PCM**
Part number
13
11 13
15
24 22 24 26 W
H
1000 pF 5 11 18 15 FKP1O111004B00_ _ _ _ 5 1500 „ 5 11 18 15 FKP1O111504B00_ _ _ _ 5 2200 „ 5 11 18 15 FKP1O112204B00_ _ _ _ 5 3300 „ 5 11 18 15 FKP1O113304B00_ _ _ _ 6 4700 „ 6 12.5 18 15 FKP1O114704C00_ _ _ _ 7 6800 „ 7 14 18 15 FKP1O116804D00_ _ _ _ 8 5 11 11 11 12.5
14 15 14 31.5
41.5
41.5
41.5
27.5
37.5
37.5
37.5
FKP1J031006D00_ _ _ _
FKP1J031007B00_ _ _ _
FKP1J031507C00_ _ _ _
FKP1J032207D00_ _ _ _
1250 VDC/600 VAC*
L PCM**
Part number
18 18 18 18 18 18 26.5
15 15 15 15 15 15 22.5
FKP1R011004B00_ _ _ _
FKP1R011504B00_ _ _ _
FKP1R012204B00_ _ _ _
FKP1R013304C00_ _ _ _
FKP1R014704D00_ _ _ _
FKP1R016804F00_ _ _ _
FKP1R016805A00_ _ _ _
0.01 mF 8 15 18 15 FKP1O121004F00_ _ _ _ 7 16.5 26.5 22.5 FKP1R021005D00_ _ _ _
6 15 26.5 22.5 FKP1O121005B00_ _ _ _
0.015 „ 6 15 26.5 22.5 FKP1O121505B00_ _ _ _
8.518.526.522.5FKP1R021505F00_ _ _ _
0.022 „
8.518.526.522.5FKP1O122205F00_ _ _ _ 10.520.526.522.5FKP1R022205H00_ _ _ _
0.033 „
10.520.526.522.5FKP1O123305H00_ _ _ _
11 21 31.5 27.5 FKP1R023306B00_ _ _ _
9 19 31.5 27.5 FKP1O123306A00_ _ _ _ 9 19 41.5 37.5 FKP1R023307A00_ _ _ _
0.047 „
11 21 31.5 27.5 FKP1O124706B00_ _ _ _
13 24 31.5 27.5 FKP1R024706D00_ _ _ _
11 22 41.5
37.5 FKP1R024707B00_ _ _ _
0.068 „
13 24 31.5 27.5 FKP1O126806D00_ _ _ _
11 22 41.5 37.5 FKP1R026807B00_ _ _ _
11 22 41.5 37.5 FKP1O126807B00_ _ _ _
0.1 mF
0.15 „
0.22 „
13 24 41.5 37.5 FKP1O131007C00_ _ _ _
15 26 41.5 37.5 FKP1O131507D00_ _ _ _
19 32 41.5 37.5 FKP1O132207F00_ _ _ _
26 29 32 41.5
41.5
41.5
37.5 FKP1R031007D00_ _ _ _
37.5 FKP1R031507E00_ _ _ _
37.5 FKP1R032207F00_ _ _ _
* AC voltage: f T 1000 Hz; 1.4 x Urms + UDC T Ur
Part number completion:
** PCM = Printed circuit module = pin spacing
Tolerance: 20 % = M
10 % = K
5 % = J
Packing:
bulk= S
Pin length: 6-2 = SD
Dims. in mm.
Ionisation inception level in isolated cases may
be lower than admissible rated AC voltage.
02.14
15 17 19 Rights reserved to amend design data without prior notification.
Continuation page 68
Taped version see page 128.
67
D
WIMA FKP 14
Continuation
General Data
Capacitance
100
150
220
330
470
680
W
H
pF 5 11 „ 5 11 „ 5 11 „ 5 11 „ 5 11 „ 5 11 1600 VDC/650 VAC*
L PCM**
Part number
18 18 18 18 18 18 15 15 15 15 15 15 W
H
2000 VDC/700 VAC*
L PCM**
Part number
FKP1T001004B00_ _ _ _ 5 11 18 15 FKP1T001504B00_ _ _ _ 5 11 18 15 FKP1T002204B00_ _ _ _ 5 11 18 15 FKP1T003304B00_ _ _ _ 6 12.518 15 FKP1T004704B00_ _ _ _ 6 12.518 15 FKP1T006804B00_ _ _ _ 6 12.518 15 FKP1U001004B00_ _ _ _
FKP1U001504B00_ _ _ _
FKP1U002204B00_ _ _ _
FKP1U003304C00_ _ _ _
FKP1U004704C00_ _ _ _
FKP1U006804C00_ _ _ _
1000 pF 6 12.518 15 FKP1T011004C00_ _ _ _ 7 14 18 15 FKP1U011004D00_ _ _ _
5 14 26.522.5FKP1T011005A00_ _ _ _ 5 14 26.522.5 FKP1U011005A00_ _ _ _
1500 „ 7 14 18 15 FKP1T011504D00_ _ _ _ 6 15 26.522.5 FKP1U011505B00_ _ _ _
5 14 26.522.5FKP1T011505A00_ _ _ _
2200 „ 8 15 18 15 FKP1T012204F00_ _ _ _ 7 16.5 26.522.5 FKP1U012205D00_ _ _ _
5 14 26.522.5FKP1T012205A00_ _ _ _
3300 „ 6 15 26.522.5FKP1T013305B00_ _ _ _ 7 16.5 26.522.5 FKP1U013305D00_ _ _ _
4700 „ 7 16.5 26.522.5FKP1T014705D00_ _ _ _
8.518.526.522.5FKP1U014705F00_ _ _ _
6800 „ 8.5 18.5 26.5 22.5 FKP1T016805F00_ _ _ _
10.520.526.522.5FKP1U016805H00_ _ _ _
0.01 mF 10.520.526.522.5FKP1T021005H00_ _ _ _11 21 31.527.5 FKP1U021006B00_ _ _ _
0.015 „
11 21 31.527.5FKP1T021506B00_ _ _ _13 24 31.527.5 FKP1U021506D00_ _ _ _
0.022 „
11 21 31.527.5FKP1T022206B00_ _ _ _15 26 31.527.5 FKP1U022206F00_ _ _ _
13 24 41.537.5 FKP1U022207C00_ _ _ _
0.033 „
13 24 31.527.5FKP1T023306D00_ _ _ _13 24 41.537.5 FKP1U023307C00_ _ _ _
13 24 41.537.5FKP1T023307C00_ _ _ _
0.047 „
13 24 41.537.5FKP1T024707C00_ _ _ _17 29 41.537.5 FKP1U024707E00_ _ _ _
0.068 „
15 26 41.537.5FKP1T026807D00_ _ _ _19 32 41.537.5 FKP1U026807F00_ _ _ _
0.1 mF17 29 41.537.5
FKP1T031007E00_ _ _ _
Dims. in mm.
Tolerance: 20 % = M
10 % = K
5 % = J
Packing:
bulk= S
l d
PCM
0.8 15 - 27.5
1.0 37.5
pin
Rights reserved to amend design data without prior notification.
02.14
Continuation page 69
68
D
WIMA FKP 1
Continuation
General Data
Capacitance
W
4000 VDC/700 VAC*
L PCM**
Part number
H
W
H
6000 VDC/700 VAC*
L PCM**
Part number
470 pF 5 14 26.522.5FKP1X004705A00_ _ _ _ 5 14 26.522.5FKP1Y004705A00_ _ _ _
680 „ 5 14 26.522.5FKP1X006805A00_ _ _ _ 5 14 26.522.5FKP1Y006805A00_ _ _ _
1000
1500
2200
3300
4700
6800
pF
5 14 26.522.5FKP1X011005A00_ _ _ _ 5 14 26.522.5FKP1Y011005A00_ _ _ _
„ 7 16.526.522.5FKP1X011505D00_ _ _ _ 7 16.526.522.5FKP1Y011505D00_ _ _ _
„

8.518.526.522.5FKP1X012205F00_ _ _ _ 10.520.526.522.5FKP1Y012205H00_ _ _ _

„ 10.520.526.522.5FKP1X013305H00_ _ _ _
10.520.526.522.5FKP1Y013305H00_ _ _ _
„
11 21 31.527.5FKP1X014706B00_ _ _ _11 21 31.527.5FKP1Y014706B00_ _ _ _
„
13 24 31.527.5FKP1X016806D00_ _ _ _13 24 31.527.5FKP1Y016806D00_ _ _ _
0.01 mF15 26 31.527.5FKP1X021006F00_ _ _ _15 26 31.527.5FKP1Y021006F00_ _ _ _
0.015 „
13 24 41.537.5FKP1X021507C00_ _ _ _13 24 41.537.5FKP1Y021507C00_ _ _ _
0.022 „
17 29 41.537.5FKP1X022207E00_ _ _ _17 29 41.537.5FKP1Y022207E00_ _ _ _
Tolerance: 20 % = M
10 % = K
5 % = J
Packing:
bulk= S
Dims. in mm.
Urms
V
650
5
Urms
V
5
400
Permissible AC voltage
in relation to frequency
at 10) C internal temperature rise
(general guide).
47
0.
2
02
0.
2
1
pF
22
00
2
pF
102
µF
5
0.
01
0.
5
630 VDC
04
0.
22
2
101
0.
00
pF
µF
µF
102
7
µF
µF
2
5
104
2
105
5
22
0.
0.
2
01
04
0.
22
102
7
00
pF
µF
02
1
102
µF
2
10
0
2 0p
pF 200 F
pF
0.
01
µF
0.
04
7
0.
µF
22
µF
5
400 VDC
2
2
5
104
2
5
105
2
5 f 106
Hz
105
5
pF
47
0.
00
02
47
00
2
µF
pF
µF
2
5 f 106
Hz
2
pF
µF
10
0
22
pF
0
pF
00
pF
0.0
1µ
F
15
0.0
68
102
µF
5
2000 VDC
2
5
104
2
105
5
00
02
1
µF
2
00
pF
22
1250 VDC
01
04
0.
104
2
5
7
00
µF
pF
µF
105
5 f 106
Hz
2
22 470
0
0. 0 p pF
01
F
µF
10
00
47 pF
0
02 0 p
F
2
µF
2
22
0.
0.
5
5
pF
µF
102
2
Urms
V 700
5
10
47
103
5 f 106
Hz
2
0.
102
5
4000 VDC
6000 VDC
µF
2
2
101
103
2
5
104
2
5
105
2
5 f 106
Hz
103
2
5
104
2
5
105
2
5 f 106
Hz
02.14
103
2
101
103
0.
101
104
2
00
101
5
22
00
1000 VDC
47
µF
2
0.0
10
1
0.
0.
103
Urms
V 700
5
µF
µF
Urms
V
600
5
0.
1600 VDC
5 f 106
Hz
2
250
2
00
2
2
0.
5
Urms
V
5
47
101
103
Urms
V
600
5
101
10 100
00
pF 470
pF
02 pF
0. 2 µ
22
1
F
00
µF
p
0.
01 F
0.
04
µF
7
µF
10
00
69
D
Recommendation for Processing
and Application of
Through-Hole Capacitors
Soldering Process
Internal temperature of the capacitor must
be kept as follows:
Polyester:
preheating:T max. T 125° C
soldering:T max. T 135° C
Polypropylene:preheating: Tmax. T 100° C
soldering:T max. T 110° C
Single wave soldering
Soldering bath temperature: T P 260 ° C
Dwell time:
t P 5 sec
Double wave soldering
Soldering bath temperature: T P 260 ° C
Dwell time:
St P 5 sec
Due to different soldering processes and
heat requirements the graphs are to be
regarded as a recommendation only.
WIMA Quality and Environmental Philosophy
ISO 9001:2008 Certification
ISO 9001:2008 is an international basic
standard of quality assurance systems for
all branches of industry. The approval
according to ISO 9001:2008 of our
factories by the VDE inspectorate certifies
that organisation, equipment and monitoring of quality assurance in our factories
correspond to internationally recognized
standards.
WIMA WPCS
The WIMA Process Control System (WPCS)
is a quality surveillance and optimization
system developed by WIMA. WPCS is a
major part of the quality-oriented WIMA
production. Points of application of WPCS
during production process:
All WIMA capacitors, irrespective of
whether through-hole devices or SMD,
are made of environmentally friendly
materials. Neither during manufacture
nor in the product itself any toxic
substances are used, e.g.
–
–
–
–
–
Lead
PCB
CFC
Hydrocarbon chloride
Chromium 6+
–
–
–
–
–
PBB/PBDE
Arsenic
Cadmium
Mercury
etc.
We merely use pure, recyclable materials
for packing our components, such as:
”carton
”cardboard
”adhesive tape made of paper
”polystyrene
We almost completely refrain from using
packing materials such as:
”foamed polystyrene (Styropor®)
”adhesive tapes made of plastic
”metal clips
RoHS Compliance
According to the RoHS Directive 2011/65/EU
certain hazardous substances like e.g. lead,
cadmium, mercury must not be used any
longer in electronic equipment as of July 1st,
2006. For the sake of the environment WIMA
has refraind from using such substances since
years already.
WIMA Kondensatoren sind bleifrei
konform RoHS 2011/65/EU
WIMA capacitors are lead free
in accordance with RoHS 2011/65/EU
Tape for lead-free WIMA capacitors
DIN EN ISO 14001:2004
WIMA’s environmental management has
been established in accordance with the
guidelines of DIN EN ISO 14001:2004 to
optimize the production processes with
regard to energy and resources.
02.14
”incoming material inspection
”metallization
”film inspection
”schoopage
”pre-healing
”pin attachment
”cast resin preparation/
encapsulation
”100% final inspection
”AQL check
WIMA Environmental Policy
14
D
Typical Dimensions for
Taping Configuration
Vh
P
P2
Diagram 1:
PCM 2.5/5/7.5mm
W
W1
W0
H
H1
W2
P1
D0
d
P
t
F
P0
H1
P
P1
H
P1
d
d
F
P0
P2
Diagram 2: PCM 10/15 mm
Diagram 3: PCM 22.5 and 27.5*mm
*PCM 27.5 taping possible with two feed holes between components
Designation
Carrier tape width
Dimensions for Radial Taping
Symbol PCM 2.5 taping
W
P0
P2
F
PCM 5 taping
PCM 7.5 taping
PCM 10 taping*
PCM 15 taping*
PCM 22.5 taping
PCM 27.5 taping
18.0 p0.518.0 p0.518.0 p0.518.0 p0.518.0 p0.518.0 p0.518.0 p0.5
for hot-sealing
for hot-sealing
for hot-sealing
for hot-sealing
for hot-sealing
for hot-sealing
for hot-sealing
Hold-down tape width
W06.0
6.0
12.0
12.0
12.0
12.0
12.0
adhesive
tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape
Hole position
W19.0 p0.59.0 p0.59.0 p0.59.0 p0.59.0 p0.59.0 p0.59.0 p0.5
Hold-down tape position
W 2
Feed hole diameter
D04.0 p0.24.0 p0.24.0 p0.24.0 p0.24.0 p0.24.0 p0.24.0 p0.2
P
12.7 p1.012.7 p1.012.7 p1.025.4 p1.025.4 p1.038.1 p1.53*8.1 p1.5 or 50.8 p1.5
0.5 to 3.0 max.
Pitch of component
Feed hole pitch
P012.7 p0.3
cumulative pitch
error max.
1.0 mm/20 pitch
0.5 to 3.0 max.
12.7 p0.3
cumulative pitch
error max.
1.0 mm/20 pitch
0.5 to 3.0 max.
12.7 p0.3
cumulative pitch
error max.
1.0 mm/20 pitch
0.5 to 3.0 max.
12.7 p0.3
0.5 to 3.0 max.
cumulative pitch
error max.
1.0 mm/20 pitch
12.7 p0.3
cumulative pitch
error max.
1.0 mm/20 pitch
0.5 to 3.0 max.
12.7 p0.3
cumulative pitch
error max.
1.0 mm/20 pitch
0.5 to 3.0 max.
12.7 p0.3
Feed hole centre
to pin
P15.1 p0.53.85 p0.72.6 p0.77.7 p0.75.2 p0.77.8 p0.75.3 p0.7
Hole centre to
component centre
P26.35 p1.36.35 p1.36.35 p1.312.7 p1.312.7 p1.319.05 p1.319.05 p1.3
Feed hole centre to bottom
H
edge of the component
cumulative pitch
error max.
1.0 mm/20 pitch
16.5 p0.316.5 p0.316.5 p0.516.5 p0.516.5 p0.516.5 p0.516.5 p0.5
18.5 p0.518.5 p0.518.5 p0.518.5 p0.518.5 p0.518.5 p0.518.5 p0.5
Feed hole centre to top
H+Hcomponent < H1H+Hcomponent < H1H+Hcomponent < H1H+Hcomponent < H1H+Hcomponent < H1H+Hcomponent < H1H+Hcomponent < H1
H
edge of the component1
32.25 max.
32.25 max.
24.5 to 31.5
25.0 to 31.5
26.0 to 37.0
30.0 to 43.0
35.0 to 45.0
Pin spacing at
+0.8
F2.5 p0.55.0 7.5 p0.810.0 p0.815 p0.822.5 p0.827.5 p0.8
upper edge of carrier tape –0.2
Pin diameter
d
0.4 p0.050.5 p0.05
Component alignment
Dh
p 2.0 max.
Total tape thickness
t
p 2.0 max.
+0.06+0,06
+0,08+0,08+0.08
„
0.5 p0.05 or 0.6 –0.05 „ 0.5 p0.05 or 0.6 –0.050.8 –0.050.8 –0.050.8 –0.05
p 3.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
p 3.0 max.
0.7 p0.20.7 p0.20.7 p0.20.7 p0.20.7 p0.20.7 p0.20.7 p0.2
ROLL/AMMO
Package
(see also page 129)
52 p2 depending on
P 360 max.
B p2 comp. dimensions
REEL P 30 p158
Unit
AMMO
52 p254 p2
500 max.
B60 p2
REEL P 360 max. B58 p2 or REEL PP 25
p1
P 30 p166 p2
68 p2
depending
on PCM and
component dimensions
see details page 130.
Dims in mm.
128
Please clarify customer-specific deviations with the manufacturer.
02.14
„ Diameter of pins see General Data.
* PCM 10 and PCM 15 can be crimped to PCM 7.5.
Position of components according to PCM 7.5 (sketch 1). P 0 = 12.7 or 15.0 is possible
D
Types of Tape Packaging of
Capacitors for Automatic
Radial Insertion
˜ REEL Packaging
340 max.
30±1
25±1
360 max.
500 max.
˜ AMMO Packaging
340 max.
370 max.
˜ ROLL Packaging
34
0m
ax.
50 max.
50 max.
70 max.
.
ax
0 m ax.
34 0 m
49
B
BAR CODE (Labelling)
Labelling of package units in
plain text and with
alphanumerical Bar Code
BARCODE „Code 39”
Scanner decoding of
„ WIMA supplier number
„ Customer‘s P/O number
„ Customer‘s part number
„ WIMA confirmation number
„ WIMA part number
„ Lot number
„ Date code
„Quantity
In addition part description of
–
–
–
–
–
–
article
capacitance value
rated voltage
dimensions
capacitance tolerance
packing
02.14
as well as gross weight and customer‘s
name are indicated in plain text.
129
D
Packing Quantities for Capacitors with
Radial Pins in PCM 2.5 mm to 22.5 mm
Size
PCM
2.5 mm
5 mm
7.5 mm
10 mm
15 mm
22.5 mm
W
2.5
3
3.8
4.6
5.5
2.5
3
3.5
4.5
4.5
5
5.5
5.5
6.5
7.2
7.2
8.5
8.5
11
2.5
3
4
4.5
5
5.7
7.2
3
4
4
4
5
5
6
6
8
5
5
6
6
7
7
8
8
9
9
10
11
5
6
7
8
8.5
10
10.5
10.5
11
12
H
7
7.5
8.5
9
10
6.5
7.5
8.5
6
9.5
10
7
11.5
8
8.5
13
10
14
16
7
8.5
9
9.5
10.5
12.5
12.5
9
8.5
9
9.5
10
11
12
12.5
12
11
13
12.5
14
14
15
15
17
14
16
18
14
14
15
16.5
20
18.5
22
19
20.5
21
24
bulk
L
4.6
4.6
4.6
4.6
4.6
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
7.2
10
10
10
10.3
10.3
10.3
10.3
13
13.5
13
13
13.5
13
13
13
13
18
19
18
19
18
19
18
19
18
18
19
18
26.5
26.5
26.5
28
26.5
28
26.5
26.5
26.5
28
Codes
0B
0C
0D
0E
0F
1A
1B
1C
1D
1E
1F
1G
1H
1I
1J
1K
1L
1M
1N
2A
2B
2C
2D
2E
2F
2G
3A
FA
3C
3D
FB
3F
3G
3H
3I
4B
FC
4C
FD
4D
FE
4F
FF
4H
4J
FG
4M
5A
5B
5D
FH
5F
FI
5G
5H
5I
FJ
S
5000
5000
5000
5000
5000
5000
5000
5000
6000
4000
3500
4000
2500
2500
2500
2000
2000
1500
1000
5000
5000
4000
3500
3000
2000
1500
3000
3000
3000
3000
2000
3000
2400
2400
2000
2400
1000
2000
1000
1600
1000
1200
500
1200
900
500
1000
1200
1000
760
500
500
540*
680*
680*
680*
450*
Moulded versions.
02.14
* TPS (Tray-Packing-System). Plate versions may have different packing units.
Samples and pre-production needs on request.
pcs. per packing unit
REEL
AMMO
P 360
P 500
340 x 340
490 x 370
H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5
N
O
F
I
H
J
A
C
B
D
2200
2500
–
2800
–
2000
2300
–
2300
–
1500
1800
–
1800
–
1200
1500
–
1500
–
900
1200
–
1200
–
2200
2500
–
2800
–
2000
2300
–
2300
–
1600
2000
–
2000
–
1300
1500
–
1500
–
1300
1500
–
1500
–
1100
1400
–
1400
–
1000
1200
–
1200
–
1000
1200
–
1200
–
800
1000
–
1000
–
700
1000
–
1000
–
700
950
–
1000
–
600
800
–
800
–
600
800
–
800
–
500
600
–
400
–
–
2500
4400
2500
–
–
2200
4300
2300
4150
–
1700
3200
1700
3100
–
1500
2900
1400
2800
–
1300
2500
1300
–
–
1000
2200
1100
–
–
900
1800
1000
–
–
1100
2200
–
1900
–
900
1600
–
1450
–
900
1600
–
1450
–
900
1600
–
1400
–
700
1300
–
1200
–
700
1300
–
1200
–
550
1100
–
1000
–
550
1100
–
1000
–
400
800
–
740
–
600
1200
–
1150
–
600
1200
–
1200
–
500
1000
–
1000
–
500
1000
–
1000
–
450
900
–
850
–
450
900
–
850
–
400
800
–
740
–
400
800
–
740
–
350
700
–
650
–
350
700
–
650
–
300
650
–
590
–
300
600
–
540
–
–
800
–
770
–
–
700
–
640
–
–
600
–
550
–
–
500
–
480
–
–
480
–
450
–
–
420
–
380
–
–
400
–
360
–
–
400
–
360
–
–
380
–
350
–
–
350
–
310
ROLL
130
D
Packing Quantities for Capacitors with
Radial Pins in PCM 27.5 mm to 52.5 mm
Size
PCM
pcs. per packing unit
REEL
AMMO
P 360
P 500
340 x 340
490 x 370
H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5
N
O
F
I
H
J
A
C
B
D
–
–
460/340*
–
420
–
–
380/280*
–
350
–
–
300
–
290
–
–
–
–
–
270
–
250
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
ROLL
bulk
W
9
11
13
13
15
15
17
17
20
20
H
19
21
24
25
26
26
29
34.5
32
39.5
L
31.5
31.5
31.5
33
31.5
33
31.5
31.5
33
31.5
Codes
6A
6B
6D
FK
6F
FL
6G
6I
FM
6J
S
640*
544*
448*
336*
384*
288*
176*
176*
216*
144*
37.5 mm
9
11
13
15
17
19
20
24
31
35
40
19
22
24
26
29
32
39.5
45.5
46
50
55
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
41.5
7A
7B
7C
7D
7E
7F
7G
7H
7I
7J
7K
480*
408*
252*
144*
132*
108*
108*
84*
72*
35*
28*
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
48.5 mm
19
23
27
33
37
31
34
37.5
48
54
56
56
56
56
56
8D
8E
8H
8J
8L
50*
72*
60*
48*
25*
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
52.5 mm
35
45
45
50
55
65
57
57
57
9F
9H
9J
25*
20*
20*
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
27.5 mm
Moulded versions.
02.14
* for 2-inch transport pitches.
* TPS (Tray-Packing-System). Plate versions may have different packing units.
Samples and pre-production needs on request.
131
D
WIMA Part Number System
A WIMA part number consists of 18 digits and is composed as follows:
Field 1 - 4:Type description
Field 5 - 6:Rated voltage
Field 7 - 10:Capacitance
Field11 - 12:Size and PCM
Field13 - 14:Version code (e.g. Snubber versions)
Field15:
Capacitance tolerance
Field16:
Packing
Field17 - 18:Pin length (untaped)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
M
K
S
2
C
0
2
1
0
0
1
A
0
0
M
S
S
D
20 %
bulk
Type description:
SMD-PET
= SMDT
SMD-PPS
= SMDI
FKP 02
= FKP0
MKS 02
= MKS0
FKS 2
= FKS2
FKP 2
= FKP2
MKS 2
= MKS2
MKP 2
= MKP2
FKS 3
= FKS3
FKP 3
= FKP3
MKS 4
= MKS4
MKP 4
= MKP4
MKP 10
= MKP1
FKP 4
= FKP4
FKP 1
= FKP1
MKP-X2
= MKX2
MKP-X2 R
= MKXR
MKP-Y2
= MKY2
MP 3-X2
= MPX2
MP 3-X1
= MPX1
MP 3-Y2
= MPY2
MP 3R-Y2
= MPRY
Snubber MKP = SNMP
Snubber FKP
= SNFP
GTO MKP
= GTOM
DC-LINK MKP 3 = DCP3
DC-LINK MKP 4S = DCPS
DC-LINK HC
= DCH_
DC-LINK HY
= DCHY
63 VDC
Rated voltage:
50 VDC = B0
63 VDC = C0
100 VDC = D0
250 VDC = F0
400 VDC = G0
450 VDC = H0
600 VDC = I0
630 VDC = J0
700 VDC = K0
800 VDC = L0
850 VDC = M0
900 VDC = N0
1000 VDC = O1
1100 VDC = P0
1200 VDC = Q0
1250 VDC = R0
1500 VDC = S0
1600 VDC = T0
2000 VDC = U0
2500 VDC = V0
3000 VDC = W0
4000 VDC = X0
6000 VDC = Y0
250 VAC = 0W
275 VAC = 1W
300 VAC = 2W
400 VAC = 3W
440 VAC = 4W
500 VAC = 5W
...
0.01 mF
Capacitance:
22 pF
= 0022
47 pF
= 0047
100 pF = 0100
150 pF = 0150
220 pF = 0220
330 pF = 0330
470 pF = 0470
680 pF = 0680
1000 pF = 1100
1500 pF = 1150
2200 pF = 1220
3300 pF = 1330
4700 pF = 1470
6800 pF = 1680
0.01 mF = 2100
0.022 mF = 2220
0.047 mF = 2470
0.1 mF = 3100
0.22 mF = 3220
0.47 mF = 3470
= 4100
1 mF
2.2 mF = 4220
4.7 mF = 4470
= 5100
10 mF
= 5220
22 mF
= 5470
47 mF
100 mF = 6100
220 mF = 6220
1000 mF = 7100
...
2.5 x 6.5 x 7.2
-
Size:
4.8 x 3.3 x 3 Size 1812 = KA
4.8 x 3.3 x 4 Size 1812 = KB
5.7 x 5.1 x 3.5 Size 2220 = QA
5.7 x 5.1 x 4.5 Size 2220 = QB
7.2 x 6.1 x 3 Size 2824 = TA
7.2 x 6.1 x 5 Size 2824 = TB
10.2 x 7.6 x 5 Size 4030 = VA
12.7 x 10.2 x 6 Size 5040 = XA
15.3 x 13.7 x 7 Size 6054 = YA
2.5 x 7 x 4.6 PCM 2.5 = 0B
3 x 7.5 x 4.6 PCM 2.5 = 0C
2.5 x 6.5 x 7.2 PCM 5 = 1A
3 x 7.5 x 7.2 PCM 5
= 1B
2.5 x 7 x 10 PCM 7.5
= 2A
3 x 8.5 x 10 PCM 7.5
= 2B
3 x 9 x 13 PCM 10
= 3A
4 x 9 x 13 PCM 10
= 3C
5 x 11 x 18 PCM 15
= 4B
6 x 12.5 x 18 PCM 15 = 4C
5 x 14 x 26.5 PCM 22.5 = 5A
6 x 15 x 26.5 PCM 22.5 = 5B
9 x 19 x 31.5 PCM 27.5 = 6A
11 x21 x 31.5 PCM 27.5 = 6B
9 x 19 x 41.5 PCM 37.5 = 7A
11 x 22 x 41.5 PCM 37.5 = 7B
94 x 49 x 182 DCH_
= H0
94 x 77 x 182 DCH_
= H1
...
Version code:
Standard
=
Version A1
=
Version A1.1.1 =
Version A2
=
...
00
1A
1B
2A
Tolerance:
±20 % =
±10 % =
±5 %
=
±2.5 % =
±1 %
=
...
6 -2
M
K
J
H
E
Packing:
AMMO H16.5 340 x 340
AMMO H16.5 490 x 370
AMMO H18.5 340 x 340
AMMO H18.5 490 x 370
REEL H16.5 360
REEL H16.5 500
REEL H18.5 360
REEL H18.5 500
ROLL H16.5
ROLL H18.5
BLISTER W12 180
BLISTER W12 330
BLISTER W16 330
BLISTER W24 330
Bulk/TPS Standard
...
Pin length (untaped)
3.5 ±0.5 = C9
6 -2
= SD
16 ±1
= P1
...
The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the
pages of the respective WIMA range.
126
=A
=B
=C
=D
=F
=H
=I
=J
=N
=O
=P
=Q
=R
=T
=S
02.14
MKS 2

WIMA FKP 1

Transkript

Podobné dokumenty

Bohužel žádaný text nebyl nalezen | GM Electronic