The Allmakes Accessory Guide 2010

Transkript

The Allmakes
Accessory Guide 2010
FREELANDER 1 & 2
DISCOVERY 1, 2 & 3
DEFENDER 90 & 110
RANGE ROVER CLASSIC, P38, L322, SPORT
SPECIALIST ACCESSORIES
UNIVERSAL ACCESSORIES
The Allmakes
Accessory Guide
SELECT THE RIGHT GEAR
Welcome to your 2010 edition of the
Allmakes Accessory Brochure which presents our
comprehensive range of quality accessories for all
Land Rover vehicles from Defender to
Range Rover Sport.
Whether your Land Rover is at home in urban
surroundings or off-road on expeditions, we have
products to help you personalise your vehicle with
whatever your lifestyle demands.
FREELANDER I
05
FREELANDER 2
13
DISCOVERY I
19
DISCOVERY 2
29
DISCOVERY 3
39
DEFENDER 90 & 110
47
RANGE ROVER CLASSIC
65
RANGE ROVER P38
71
RANGE ROVER L322
77
RANGE ROVER SPORT
81
SPECIALIST ACCESSORIES
87
Including: Terrafirma, Performance upgrades, Superwinch, Warn, ARB, HiLift,
Mammouth Checkerplate, Front Runner, Witter Towing, Exmoor Trim and Kahn.
UNIVERSAL ACCESSORIES
Allmakes 4x4
39 Milton Park, Abingdon
Oxfordshire OX14 4RT
T:
F:
E:
W:
44 (0) 1235 821122
44 (0) 1235 821133
[email protected]
www.lrparts.co.uk
135
FREELANDER 1
The UK company with global recognition in Land Rover
expertise, knowledge and service...
05
...supplying quality accessories for over 30 years.
DeLuxe Side Steps
Bar Type Dog Guard - STC7939AB
Black powder coated sculptured side steps, made from tubular steel with an
anti slip tread plate top. These steps bolt directly onto existing mounting points.
Supplied with fitting kit and instructions.
Black powder coated steel bar type dog guard. This guard incorporates a
lower mesh panel and can be used in conjunction with most load space
protectors. It also allows the seats to be folded down without removing the
guard. Supplied with fitting kit and instructions.
- GAF900
OEM
- STC53077
OEM
Polished Aluminium Side Steps - GAF905
Bike Carrier - CM08
Polished aluminium side steps with a stylish rubber anti slip insert and moulded
end caps. These steps bolt directly onto existing mounting points. Supplied with
fitting kit and instructions.
Mont Blanc spare wheel mounted bike carrier. Can be fitted to any vehicle
with rear door mounted spare wheel. The spare wheel cover must be
removed to mount the carrier securely.
06 FREELANDER 1
ALL
ALL
Satin Aluminium Side Steps - GAF904
Roof Cross Bars - 404U
Satin aluminium side steps with a stylish rubber anti slip insert and moulded
end caps. These steps bolt directly onto existing mounting points. Supplied with
Mont Blanc galvanised and black powder coated roof cross bars (110 cm)
for vehicles with factory fitted roof rails. Supplied fully assembled.
Max load 100 KG.
ALL
ALL
Stainless Steel Deluxe Side Steps
Rubber Mat Sets
Stainless steel sculptured side steps, made from tubular stainless steel with an
anti slip tread plate top. These steps bolt directly onto existing mounting points.
These contoured black rubber mat sets fit directly into the footwells keeping
them free from mud and dirt.
Front mat set - GMS056
Rear mat set - GMS057
ALL
- GAF926
ALL
OEM - STC53078
Flexible Loadspace Mat 3 door - GLP107
This flexible black mat fits directly into the loadspace keeping it free from
mud and dirt. It provides some much needed traction for your pet and helps
prevent your goods from sliding around.
ALL
- GLP107
OEM
- STC7974
Front Wind Deflectors
Climair transparent front wind deflectors reduce wind noise and provide
protection from rain, whilst driving with the windows down. Easily DIY
installed by simply slotting into the window channel. Supplied as a pair.
3 Door - GWD005
5 Door - GWD006
- SELECT THE RIGHT GEAR
GEN
ALL
Genuine Land Rover Part
OEM Allmakes Orginal Equipment
ALL
Allmakes Replacement Part
07 FREELANDER 1
ALL
Front Light Guards - STC7962AA
Seat Covers
Pair of black plastic front light guards suitable for
vehicles up to 2004.
Coverking waterproof front seat covers to enhance and protect your seats
from everyday dirt and grime. Supplied as a pair in slate grey. Made from
textured polyester fabric which is comfortable to sit on and is slide resistant.
Can be wiped clean or gently machine washed to restore look.
OEM
5 door front seat covers (pair) - GSC223
3 door front seat covers (pair) - GSC224
Rear seat covers (set) - GSC225
Front Light Guards - VUB501390
Pair of black plastic front light guards suitable for vehicles from 2005. Supplied
with fitting kit and instructions.
08 FREELANDER 1
Rear Light Guards - STC7960
Exhaust Trim - GAF927
Set of 4 black plastic rear light guards to fit both the rear body and rear
bumper lights on models up to 2004.
Polished stainless steel exhaust trim for 1.8 petrol engine models.
ALL
OEM
Rear Light Guards - VUB501400
Exhaust Trim - GAF928
Set of 4 black plastic rear light guards to fit both the rear body and rear
bumper lights on models from 2005. Supplied with fitting kit and
instructions.
Polished stainless steel exhaust trim for diesel engine models.
OEM
ALL
Rear Spoiler - GAF906
Towbar Step - GTS001
A lightweight moulded rear spoiler designed to enhance the appearance of
your Freelander. The spoiler requires painting black or colour matching to
your vehicle. Supplied with fitting kit and instructions.
Black powder coated Tow Bar Step. The photo also includes a Witter Towing
Kit (KNK500070) - see page 122 for full Witter Towing range.
ALL
ALL
Number Plate Surrounds
Square rear number plate surround and rectangular front number plate
surround, create a stylish black border. They provide an ideal complement to
any black accessories or trim that you may have on your vehicle. The
surround is designed so that the number plate can be screwed through or
fitted using adhesive tape. Max size of number plate 275 x 200mm.
ALL
Tow Bar -Detachable with Electrics - 6a on - KNK500080
This is a European style detachable swan neck tow bar. The kit includes N type
electrics. For further towing options for Freelander please see page 122.
Square Rear number plate surround - GAF924
Rectangular Front number plate surround - GAF925
OEM
GEN
ALL
09 FREELANDER 1
ALL
OEM
Black Aluminium Sill Protectors - 3-SILL-FLR-B
Terrafirma PowerPlug - TFPP100
This Mantec sill protection is manufactured out of 3mm aluminium chequer
plate and has been designed to neatly cover the existing sills.
The Freelander 1 Td4 Power plug provides an increase of 25bhp and
30ftlbs of torque making the vehicle considerably more drivable. An
increase of between 5 and 10% fuel economy has also be reported when
driven responsibly.
ALL
ALL
Aluminium Sill Protectors - 3-SILL-FLR-S
Terrafirma Cross Drilled Brakes
This Mantec anodised silver aluminium sill protection is manufactured out of
3mm chequer plate and has been designed to neatly cover the existing sills.
Terrafirma brakes offer increased bite from cold and excellent fade resistance
in most 4WD braking situations. Whether it’s a steep rocky descent,
ploughing through mud and water or just daily driving, the brakes will give
excellent performance.
ALL
Front (01 on) - Vented - SDB101070CDG
ALL
Fuel Tank Guard - 3-TG-FLR
ALL
Sump Guard - GMN072
Mantec 8mm aluminium sump guard protects the front end from damage
when driving off road. Supplied with fitting kit and instructions.
ALL
Exhaust Guard - 3-EG-FLR
This Mantec exhaust guard kit consists of a steel frame with recovery eye
and an 8mm thick aluminium blade. The guard prevents debris and rough
terrain from damaging the exhaust and fuel tank.
ALL
Raised Air Intake for Freelander V6 - 1-FLRV6
The Mantec steel raised air intake fits down the right hand side window
pillar, passes neatly through the wing and along the inside to the right side
filter box. A cutting template is provided.
Not suitable for 1.8L (early Freelander).
ALL
ALL
11 FREELANDER 1
10 FREELANDER 1
GEN
Mantec’s Tank Guards are formed in 8mm and 4mm aluminium plate.
This excellent design stops any debris or rough terrain smashing through
the fuel tank.
FREELANDER 2
13
12
FREELANDER 1
Brushed Aluminium Side Steps - LR002773
Carpet Mat Set - GMS062
Brushed aluminium side steps with stylish rubber anti slip tread. These steps
bolt directly onto existing mounting points. Supplied with fitting kit
GEN
and instructions.
Set of 5 front, rear and loadspace tailored black carpet mats. A quality
alternative to traditional rubber mats help keep your vehicle free from mud
and dirt.
Stainless Steel Side Runners - LR003318
ALL
Polished stainless steel tubular side runners. These side runners bolt directly
onto existing mounting points. Supplied with fitting kit and
OEM instructions.
Black Side Runners - LR003840
Rubber Mats - LR002481
Black powder coated steel tubular side runners. These side runners bolt
directly onto existing mounting points. Supplied with fitting kit and
GEN
instructions.
Set of 4 front and rear tailored rubber mats which fit directly into the
footwells to keep them free from mud and dirt.
Aluminium Side Steps
GEN
Aluminium side steps with stylish rubber anti slip insert and moulded end caps.
These side runners bolt directly onto existing mounting points. Supplied with
Matt finish - GAF918
Satin finish - GAF919
Rubber Loadspace Mat - LR002516
This rubber mat fits directly into the loadspace of your vehicle keeping it free
from mud and dirt. It provides some much needed traction for your pet and
helps prevent your goods sliding around.
Tubular Side Step
GEN
Black/Chrome Tubular Side Step with Foot Plates.
OEM Black - GAF200 NEW
Chrome - GAF201 NEW
Loadspace Liner - LR002425
Mesh Loadspace Guard - LR002521
Flexible waterproof fabric loadspace liner, keeps the rear of your vehicle clean up to window
height, it also covers the whole floor area when the rear seats are folded down.
Black powder coated steel mesh loadspace guard with removable
long object panel. Prevents objects moving forward even with the
rear seats folded down. Supplied with fitting kit and instructions.
GEN
GEN
Mesh Dog Guard - GDG1063
Seat Covers
Grey powder coated steel mesh dog guard. This guard prevents objects
moving forward when the rear seats are in the upright position.
OEM
from everyday dirt and grime. Supplied in slate grey. Made from textured
polyester fabric which is comfortable to sit on and is slide resistant. Can be
wiped clean or gently machine washed to restore look.
Front seat covers (pair) - GSC226
Rear seat covers (set) - GSC227
Light Guards
ALL
Black plastic light guards.
Supplied with fitting kits and instructions.
Front light guards - LR002408
OEM
Rear light guards - LR003685
GEN
ALL
15 FREELANDER 2
14 FREELANDER 2
ALL
Mirror Covers
Winter Rubber Mat Set - GMS063
Chrome look mirror covers to enhance the appearance of your vehicle.
Set of rugged black rubber mats with raised lip. Set consists of 2 front and 2
rear mats.
Top pair - VUB503880MMM
Bottom pair - LR003905
To fit you will need adhesive part number STC50551
ALL
ALL
Bumper Styling Cover - LR003319
Boot Tray - GLP116
Black moulded soft bumper styling cover enhances the front end
appearance of your vehicle.
This semi rigid black boot tray fits directly into the loadspace area to keep
it free from mud and dirt. It provides some much needed traction for your
pets and helps prevent your cargo from sliding around.
16 FREELANDER 2
Tow Bracket Kit - Swan Neck - LR007481
The refined engine in the new Freelander 2 responds exceptionally well to a
Terrafirma Power plug. The Range Rover's little brother sees significant
improvements in performance and economy. 25bhp and 40ftlbs of torque
improve the driving experience considerably and towing a large trailer or
caravan is now a breeze. Each acceleration bringing a smile to the driver's
face especially with upto 10% improvement in fuel economy.
ALL
This is a European style detachable swan neck tow bar. The kit includes N
type electrics.
For further towing options for Freelander please see page 122.
Right Hand Front Lamp Guard - LR002404
Tow Bracket kit - Quick Release - LR007480
A single black plastic front light guard.
This kit consists of a towing bar which can be detached when towing is not
required.
OEM
GEN
OEM
Left Hand Front Lamp Guard - LR002405
Sump Guard 6mm Aluminimum - 3FLR-SPG-07
A single black plastic front light guard.
The Freelander 2 Mantec Guard is manufactured in 6mm high grade
aluminium. It is designed to replace the existing Land Rover sump guard.
GEN
ALL
Lamp Guard Kit
Tank Guard Aluminimum - 3FLR-TG-07
Supplied with fitting kits and instructions.
Mantec’s Tank Guards are formed in 8mm and 4mm aluminium plate. This
excellent design prevents any debris or rough terrain smashing through the
fuel tank.
OEM
Front light guard kit - LR002408
Rear light guard kit - LR003685
ALL
GEN
ALL
17 FREELANDER 2
ALL
GEN
DISCOVERY 1
19
18
FREELANDER 2
Satin Aluminium Side Steps - GAD040
Rear Light Guards - RTC9503AA
Satin aluminium side steps with stylish rubber anti slip inserts and plastic
moulded end caps. These side steps bolt directly onto existing mounting
points.
Tough nylon coated metal lightguards, hinged for easy cleaning and
servicing. Supplied as a pair with a fitting kit and instructions.
OEM
OEM
Rubber Top Side Steps - GAR041
Front Light Guards > 1995 - GAD014
Black moulded rubber top side steps finished with a stylish chevron tread
pattern. These side steps bolt directly onto existing mounting points.
Black plastic coated light guards, hinged for easy cleaning.
Supplied as a pair with a fitting kit and instructions.
ALL
Terrafirma Rock Sliders
Front Light Guards - (No Airbags + Headlamp Washer) STC8452
These are made from sturdy steel box section and protect the sills and
sides of your vehicle. They are supplied with or without the optional steel
tube outrigger ‘tree bars’, that keep the bodywork away from large
rocks, earth banks and trees.
3 door model - without Tree Bars - TF804 with Tree Bars - TF805
5 door model - without Tree Bars - TF806 with Tree Bars - TF807
Tough nylon coated metal lightguards for optimum durability.
OEM
ALL
Chequer Plate Side Kit > 1998 - GAL213
Rear Bumper Light Guards - GAD016
Chequer plate side kit for Discovery to 1998.
Suitable for both 3 and 5 door vehicles.
Black plastic coated rear light guards supplied as a pair with a fitting kit.
For vehicles 1995 to 1998.
ALL
ALL
Mesh Dog Guard - STC8414
Seat Covers
Black powder coated steel mesh dog guard. The guard is easily
removable without tools and can be used in conjunction with loadspace
protectors and liners. Supplied with fitting kit and instructions.
Coverking waterproof seat covers, supplied in slate grey.
OEM
Std front - GSC209 (pair)
ES front - GSC210 (pair)
Split rear seat - GSC211 (set)
Rear jump seat - GSC212 (single)
ALL
Bar Type Dog Guard - STC7570
Front Wind Deflectors - GWD002
Black powder coated steel bar type dog guard. The guard is easily
protectors and liners. Supplied with fitting kit and instructions.
ALL
OEM
GEN
ALL
21 DISCOVERY 1
20 DISCOVERY 1
ALL
Dashboard Repair Kit
Raised Air Intake
This repair kit is designed to repair the warped and distorted dash
board on 300Tdi Discovery. The kit comes complete with all parts
required and instructions.
Mantec snorkel kit made from zinc phosphated steel tube with a black polyester coating. Designed to reduce
the amount of dust taken into the air filter as well as increase the vehicle’s wading depth. Supplied with fitting
kit and instructions.
300Tdi &V8 - GMN011 (1-DIS300)(
Front Rubber Mats - GMS052
Raised Air Intake Kit
These contoured rubber mats fit directly into the front footwells keeping
Sold as a pair.
Safari snorkel kit manufactured from heavy duty black plastic. Designed to
reduce the amount of dust taken into the air filter as well as increase the
vehicle’s wading depth.
200Tdi - GSS010
300Tdi & V8 without ABS - GSS011
300Tdi & V8 with ABS - GSS012
ALL
22 DISCOVERY 1
200Tdi - GMN010 (1-DIS200)
ALL
OEM
Rear Rubber Mats - GMS053
Mantec Wading Kit - 10-WK1-V8
These contoured rubber mats fit directly into the rear footwells keeping
Sold as a set.
Breather extensions are supplied in a kit. All existing breather pipes are extended from the
engine bay and/or axles to the height of the raised air intake.
ALL
ALL
Roof Rack Access Ladder - STC50134
Black powder coated ladder attaches to the rear door for easy access to any roof rack.
OEM
Hydraulic Rear Step
Hydraulic rear step with moulded tread cover.
OEM - RTC9505AC
and RTC9593AA
(service kit for RTC9505AC)
Pintle Hitch - NRC2051
Dixon Bate Pintle Hitch also known as a Nato Hitch allows trailers with a ring hitch to be towed
allowing 360 degrees of rotation, ideal for towing off road. and is also preferred for safe recovery
using rope or strap. Suitable for all towing kits. For further towing options please see page 122.
OEM
GEN
ALL
23 DISCOVERY 1
ALL
Black - GDK001
Grey - GDK002
Brown - GDK003
Wheel - GRW001
Deep Dish Alloy Wheel - ANR3631MNH
White 8 spoke 7 x 16 steel road wheel.
XS Deep dish wheel 7 x 16, silver powder coated.
No nuts/caps.
OEM
ALL
Wheel - GRW002
Boost Alloy Wheel - RRC503400MNH
Silver 8 spoke 7 x 16 steel road wheel.
Boost alloy wheel 7 x 16 silver powder coated.
No nuts/caps.
24 DISCOVERY 1
Wheel - GRW003
Locking Alloy Wheelnut Set - STC8843AA
Black 8 spoke 7 x 16 steel road wheel.
Allmakes locking wheel nut set, suitable for alloy wheels.
Supplied as a set of 5 with 1 wheel nut key.
ALL
ALL
Wheel - GRW004
Wheel Spacers - TF301
White modular 7 x 16 steel road wheel.
Top quality aluminium 30mm wheel spacers, improve
handling, steering lock and vehicle appearance.
Supplied with wheel nuts.
ALL
ALL
Wheel - GRW005
Wheel Arch kit
Silver modular 7 x 16 steel road wheel.
Wheel arch kit to suit vehicles with body side mouldings.
3 door - GAD043
5 door - GAD041
Wheel arch kit to suit vehicles without body side mouldings.
3 door - GAD044
5 door - GAD 042
ALL
ALL
Wheel - GRW006
Black modular 7 x 16 steel road wheel.
For further products for Discovery 1 please see our Specialist Accessories section on
page 87 which includes Terrafirma and Front Runner as well as winching equipment.
Additional accessories may also be found in our Universal section on page 135.
OEM
GEN
ALL
25 DISCOVERY 1
OEM
ALL
Stainless Steel Extended Brake Hoses
Rear Inertia Seatbelt - GSB264
Goodridge 2” longer than standard stainless steel braided brake hoses.
Improve brake performance and ideal for lifted vehicles.
Retracting lap and diagonal seat belt.
ALL
1980 - 92 - TLR0300-5P2
1992 - 94 - TLR0301-5P2
1995 - 98 with ABS - TLR0107-4P2
1995 - 98 without ABS - TLR0107-3P2
ALL
Alloy Steering Guard - GAD045
Seat Mounted Seatbelts
Heavy duty 8mm aluminium steering guard which bolts directly onto
existing chassis mounting points.
A choice of retracting or static lap seat belts.
Inertia Lap Seatbelt - GSB2220
Static Lap Seatbelt - GSB210
ALL
ALL
GEN
ALL
Alloy Steering Guard - 3-SG-DIS
ALL
Differential Guard - GAL049
Black powder coated steel diff guard suitable for the front and rear
differentials. Simple clamp on design.
ALL
Front Differential Cover - GAL149
These are replacement weld on steel axle differential covers. Made to exactly
match the original and fitted when the original has rusted through or has
been damaged off road. The original needs to be cut and ground off and the
new one welded in place. Be sure to mark the location of the level plug to
ensure the correct quantity of oil is replaced.
ALL
Rear Differential Cover - GAL150
ALL
27 DISCOVERY 1
26 DISCOVERY 1
Mantec guard manufactured using a steel frame with an 8mm thick
aluminium blade.
DISCOVERY 2
29
28
DISCOVERY 1
Rubber Top Side Steps - GAD212
Terrafirma Rock Sliders
pattern. The kit includes front mud flaps. These steps bolt directly onto
existing mounting points. Supplied with fitting kit and instructions.
These are made from sturdy steel box section and protect the sills and sides
of your vehicle. They are supplied with or without the optional steel tube
outrigger ‘tree bars’, that keep the bodywork away from large rocks, earth
banks and trees.
ALL
ALL
Without Tree Bars - TF808
With Tree Bars - TF809
Brushed Aluminium Side Steps - GAD213
Roof Rack Access Ladder - FRDISCO21
Brushed aluminium side steps with a stylish rubber anti slip insert and
plastic moulded end caps. These side steps bolt directly onto existing
mounting points.
Front Runner black powder coated ladder attaches to the rear door for
easy access to any roof rack. Supplied with fitting kit and instructions.
ALL
Polished Aluminium Side Steps - GAD214
Polished aluminium side steps with a stylish rubber anti slip insert and
mounting points.
Black powder coated ladder, attaches to the rear door for easy access to any roof rack.
OEM
ALL
Lozenge Type Side Steps - STC50030
Expedition Roof Rack - FRDISCOEX
Pair of black rubber moulded side steps with chevron tread pattern.
Includes front mud flaps.
Front Runner black powder coated aluminium expedition roof rack.
Dimensions 2.2m x 1.4m. Supplied with fitting kit and instructions.
For Front Runner roof rack accessories see page 116.
ALL
OEM
Roof Bars - GAD227
Satin aluminium side steps with stylish rubber anti slip inserts and
mounting points.
Black powder coated steel roof cross bars for vehicles with factory
fitted roof rails.
ALL
OEM
Stainless Steel Side Runners - STC50032
Roof Bars - STC8057AC
Polished stainless steel side runners. These runners bolt directly onto
existing mounting points and include front mud flaps. Supplied with fitting
For vehicles that do not have factory fitted roof rails, sports bars clamp
straight into the roof gutter. Supplied with fitting kit and instructions.
OEM
OEM
GEN
ALL
31 DISCOVERY 2
30 DISCOVERY 2
ALL
Light Guards - STC50026
Bike Carrier - CM08
Pair of black plastic front light guards up to 2003
Mont Blanc spare wheel mounted bike carrier can be fitted to any vehicle
with rear door mounted spare wheel. The spare wheel cover must be
removed to mount the carrier securely.
OEM
Front Light Guards - STC53193
Wind Deflectors - GWD007
Pair of black plastic front light guards suitable for vehicles from 2003.
Climair transparent front & rear wind deflectors reduce wind noise and
provide protection from rain, whilst driving with the windows down. Easily DIY
Front pair - GWD007
Rear pair - GWD009
ALL
OEM
Dog Guard
Pair of black plastic rear lamp guards up to 2003.
The guard is easily removable without tools and can be used in conjunction
with loadspace protectors and liners. Supplied with fitting kit and
instructions. Not suitable for vehicles with rear air-con.
ALL
- GAD210 (Bar Type)
OEM
- STC50082AA (Bar Type)
- STC50323 (Mesh Type)
32 DISCOVERY 2
OEM
Rubber Mats - GMS055
Pair of black plastic rear light guards from 2003.
These contoured rubber mats fit directly into the rear footwells keeping
Sold as a pair.
Front - GMS054
Rear - GMS055
OEM
ALL
Loadspace Mat - STC50052AA
Pair of black plastic rear bumper light guards from 2003. Supplied with
Black, half length loading compartment mat to protect your loadspace area
up to the rear seats.
OEM
OEM
Spot Light Mounting Bar - GAD211
Loadspace Mat - STC50053AA
Black powder coated shallow steel tube designed to mount two driving
or spot lights to the front bumper.
Supplied with fixing kit.
Black, full length rubber loading compartment mat. This mat covers
loadspace area and continues under the rear seats to provide protection
when the seats are folded down.
ALL
OEM
GEN
ALL
33 DISCOVERY 2
ALL
Seat Covers
Wading Kits (Mantec)
All existing breather pipes are extended from the engine bay and/or axles to
the height of the raised air intake.
Front seat covers for vehicles without arm rests - GSC213
Front seat covers for vehicles with armrests - GSC214
Rear split seat cover - GSC215
Rear jump seat cover - GSC216
TD5 engines - 10-WK3-TD5
Petrol V8 engines - 10-WK1-V8
ALL
Hydraulic Rear Step - GAD050
Hydraulic rear step with moulded tread cover.
ALL
Driving Lights - STC53196AA
Terrafirma 30mm Alloy Wheel Spacers - TF302
Land Rover 8” 55w driving lights, supplied with wiring loom and fitting kit.
These wheel spacers give an extra 60mm track width, providing improved
handling, cornering and stability as well as increase steering lock.
34 DISCOVERY 2
OEM
ALL
Stainless Steel Extended Brake Hoses - TLR0109-4P2
Wheels
Improve brake performance and ideal for
lifted vehicles.
9 spoke Stormer 9.5" x 20" alloy road wheel - GRW008
9 spoke Diamond Stormer 9.5" x 20" alloy road wheel - GRW009
10 spoke Diamond Sport 9.5" x 20" alloy road wheel - GRW010
ALL
ALL
Raised Air Intake Kit (1-DIS/S11) - GMN012
Mantec snorkel kit made from zinc phosphated steel tube with a black polyester coating. Designed
to reduce the amount of dust taken into the air filter as well as increase the vehicle’s wading depth.
ALL
Plastic Raised Air Intake Kit - GSS013
vehicle’s wading depth.
OEM
GEN
ALL
35 DISCOVERY 2
ALL
Trailer lighting Socket - STC50081
Plug in trailer lighting socket for vehicles 1995 - 2002.
The Terrafirma Power plug is a highly developed, pre-programmed state of
the art performance upgrade that works in conjunction with the engine
management system already fitted to all post 1998 diesel Land Rovers.
ALL
ALL
Towing Kit - STC50319
Terrafirma Cross Dilled Brakes
This multi height towing kit contains the tow ball including all fittings and
instructions. It is mounted to existing chassis points.
Terrafirma brakes offer increased bite from cold and excellent fade resistance
in most 4WD braking situations. Whether it’s a steep rocky descent,
ploughing through mud and water or just daily driving, the brakes will give
excellent performance. For further Terrafirma options please see page 88.
Front - SDB000380CDG
Rear - SDB000470CDG
OEM
ALL
Adjustable Tow Bars
Terrafirma Shock Absorbers
OEM
For Coil Spring Vehicles - STC50287AB
For Air Spring Vehicles - STC50289AB
Featuring a tough twin tube design allowing a large volume of oil for cooler
internals and improved protection of working parts. Special internal bump
stops preserve the internal piston from impacts in extreme conditions.
High quality deep silver powder coated finish resists corrosion for long lasting
good looks. For further Terrafirma options please see page 88.
ALL
Front shock - TF118
Rear shock - TF119
Front Differential Guard - GAD249
Dixon Bate Pintle Hitch also known as a Nato Hitch allows trailers with a
ring hitch to be towed allowing 360 degrees of rotation, ideal for towing
off road. and is also preferred for safe recovery using rope or strap.
Suitable for all towing kits.
Black powder coated steel front diff guard, suitable for
right hand drive vehicles only.
Supplied with fitting kit.
ALL
OEM
Steering Guard - GAD245
For further towing options for Discovery 2 please see page 122.
Heavy duty 8mm aluminium steering guard bolts directly onto existing
chassis mounting points.
ALL
Steering Guard - GMN071
Mantec Heavy duty 8mm aluminium steering guard bolts directly onto
ALL
GEN
ALL
37 DISCOVERY 2
36 DISCOVERY 2
Adjustable height coupling complete with all the necessary brackets,
finished in a black phosphate primer for corrosion resistance and black
powder top coat. The adjustable slider is pre-drilled to accept all 2 and 4
hole towing attachments including towballs, universals, jaws and pintles.
DISCOVERY 3
39
38
DISCOVERY 2
Brushed Aluminium Side Steps- VTK500010
Load Space Guard - VUB501170
Brushed aluminium side steps with stylish rubber anti slip tread. These steps
bolt directly onto existing mounting points. Supplied with fitting kit and
instructions.
Black powder coated steel mesh loadspace guard.
Prevents objects moving forward even with the rear seats folded down.
GEN
OEM
Stainless Steel Side Runners - VTD500020
Dog Guard - GDG0443
Polished stainless steel tubular side runners. These runners bolt directly onto
existing mounting points.
Mesh type dog guard in grey.
OEM
GEN
Black Side Runners - VTD500010
Black powder coated steel tubular steel side runners.
These runners bolt directly onto existing mounting points.
40 DISCOVERY 3
Door Sill Scuff Plates - EBN500041
Set of 4 stainless steel door sill scuff plates.
Black plastic rear light guards. Supplied with fitting kit and instructions.
OEM
GEN
Mirror Covers
ALL
Black powder coated aluminium rear light guards.
OEM
41 DISCOVERY 3
OEM
OEM
Semi Rigid Waterproof Boot Tray - GLP113
Door Protection Strip - VPLAP0012
Semi rigid waterproof foam boot tray for 5 seater Discovery.
Set of moulded door protection strips, designed to protect your doors from
car park knocks.
GEN
ALL
Rubber Mats
Seat Covers
Front & Rear black rubber floor mats.
LHD - EAH500050PMA
RHD - EAH500052PMA
Coverking waterproof front seat covers to enhance and protect your seats from everyday dirt
and grime. Supplied as a pair in slate grey. Made from textured polyester fabric which is
comfortable to sit on and is slide resistant. Can be wiped clean or gently machine washed to
restore look.
GEN
Front seat covers for vehicles without seat airbags - GSC217
Front seat covers for vehicles fitted with seat airbags - GSC218
Front seat covers for vehicles fitted with seat airbags and armrests - GSC219
Rubber Mat- EAH500100PMA
3rd row black rubber mat.
Rear covers for 5 seat set - GSC220
Rear covers for 7 seat set - GSC221
Rear jump seat - GSC222
ALL
Rubber Loadspace Mat - LR003895
Black, half length floor mat for luggage compartment.
OEM
This rubber mat set fits in both front and rear
footwells and has raised lips to hold water in.
ALL
Black moulded soft bumper styling cover enhances the front end
appearance of your vehicle.
OEM
GEN
ALL
43 DISCOVERY 3
42 DISCOVERY 3
GEN
Raised Air Intake Kit- GSS018
Front Runner black powder coated ladder attaches to the rear door for easy
access to any roof rack.
vehicle’s wading depth. Supplied with fitting kit and instructions.
OEM
ALL
Slimline Roof Rack - FRDISCO4002
Raised Air Intake - VPLAP0018
Front Runner black powder coated 2.2m aluminium roof rack.
Mantec/Land Rover snorkel kit made from heavy duty black plastic. Designed
to reduce the amount of dust taken into the air filter as well as increase the
vehicle's wading depth.
GEN
Roof Cross Bars - 404UL
Mont Blanc galvanised and black powder coated roof cross bars for vehicles
with factory fitted roof rails. Supplied fully assembled. Max load 100 KG.
handling, cornering and stability as well as increased steering lock.
ALL
ALL
Sump Guard (No Winch Fitted) - 33-SPG-319/NW NEW
Wheel - GRW008
Sump guard manufactured from 8mm plate, designed to protect the front
underbody.This guard is for fitting vehicle without a winch.
9 spoke Stormer 9.5" x 20" alloy road wheel.
ALL
ALL
Extra Fuel Tank - FRDISCO36
Wheel - GRW009
Extra Fuel Tank with protection.
9 spoke Diamond Stormer 9.5" x 20" alloy road wheel.
ALL
ALL
Tow Bar Electrics Kit - YWJ500201
Wheel - GRW010
N & S type trailer lighting kit - clips into existing harness.
We also offer a full range of Witter Towing Products, see page 122.
10 spoke Diamond Sport 9.5" x 20" alloy road wheel.
GEN
ALL
GEN
ALL
45 DISCOVERY 3
44 DISCOVERY 3
GEN
DEFENDER
47
46
DISCOVERY 3
Chequer Plate Top Side Steps
Rear Bumperettes - GAL025
Black powder coated steel side steps with aluminium chequer plate tread
tops. These side steps bolt directly onto existing mounting points. Supplied
Def 90 - GAL052
Def 110 - GAL053
Black Plastic coated steel twin tube rear bumper corners. Supplied with
ALL
Rubber Top Side steps
Stainless Steel Radiator Grill
Def 90 - STC8438AA
Def 110 - STC8015AA
Stainless steel replacement radiator grill.
Suitable for all models.
Stainless Steel - GAL220
Black - GAL221
OEM
ALL
Tubular Side Steps
Stainless Steel Wing Top Air Vents
Black powder coated 3” steel tube side steps with an aluminium chequer
plate tread. Supplied with fitting kit and instructions.
Pair of stainless steel wing top heater air intake vents. Long lasting style.
Def 90 - GAL060 (Fatboy style)
Def 110 - GAL064 (Tomb Raider style)
Silver - GAL215
Black - GAL216
ALL
ALL
Tomb Raider Side Steps
Stainless Steel Wing Side Air Vent
Black powder coated Tomb Raider side steps with an aluminium chequer
plate tread. Supplied with fitting kit and instructions.
Stainless steel wing side air intake vent. Long Lasting style.
Right - GAL217
Left - GAL218
Black powder coated - GAL219 (either hand)Bla
Def 110 - STC61860-1
ALL
OEM
Rock Sliders
Rear Steperettes - GAL223
Body side protection for hard core off roading.
Black powder coated steel box section rear bumper steps with aluminium
chequer plate tops.
Def 90 With Tree Bars - TF801
Def 110 With Tree Bars - TF810
Def130 With Tree Bars - TF814
ALL
ALL
Heavy Duty Jackable Sills
Differential Cover
Mantec black powder coated steel box section jackable replacement sills provide
off road protection.
ALL
ALL
Def 90 - GMN080
Def 110 - GMN081
Front - GAL149
GEN
Rear - GAL150
ALL
49 DEFENDER 90 & 110
ALL
Differential Guard - GAL049
Black powder coated steel diff guard suitable for the front and rear
differentials. Simple clamp on design. Suitable for all models up to 1998.
Securon BS Approved Seatbelt
Front Static Lap & Diagonal Seatbelt - GSB300/30
Front Inertia Lap & Diagonal Seatbelt - GSB500/30
ALL
Mantec Window Guards Set
4-WGSET – up to 1999, external rear and side window guard set
These contoured rubber mats fit directly into the front footwells keeping them
free from mud and dirt.
Sold as a pair.
4-WGSET/99 – External rear and side window guard set 1999 to 2001
4-WGSET.INT/02 – 2002 on Internal rear and side window guard set
4-WGSET/02 – front window guard set all model years
ALL
4-WGRS.EX/02 – External side window guards -2002 on
4-WGRS.INT/U – Internal side window guards – 1990 to 2002
4-WGR – up to 1999 internal rear window guard set
4-WGR/99 – Internal rear window guards 1999 to 2001
4-WGR/02 – rear set of 3 window guards (with high level brake cut out)
4-WGR/02-NC – rear set of 3 window guards (without high level brake cut
out – 2007)
These tailored rubber mats fit directly into the rear footwell keeping it free
from mud and dirt.
Sold as a pair.
ALL
ALL
Unbreakable Mirrors (without short arm)
Rubber Loadspace Mat
Mirrors have an optical quality polycarbonate lens which will not shatter or
discolour in sunlight with a strong, flexible polypropylene casing which
absorbs hard blows without breaking. Universal fitting (either left or right of
vehicle), lightweight, hard lacquer coating on lens which will repel
condensation and surface water with excellent reflectivity.
Flat Unheated - GAL240
Flat Heated - GAL241
ALL
Convex Unheated - GAL242 Convex Heated - GAL243
This rubber mat fits directly into the loadspace keeping it free from mud and
dirt. It provides some much needed traction for your pet and helps prevent
your goods from sliding around.
Unbreakable Mirrors including Short Arm
Floor Mats Front - XA on - STC50172
Flat Unheated - GAL245
Flat Heated - GAL247
Convex Unheated - GAL249
Convex Heated - GAL251
Front rubber mat set made from a heavy duty rubber construction.
ALL
ALL
90 - GMS061
GEN
110 - STC7899
GEN
Heated Mirror Wiring Kit for GAL241, 243, 247 & 251 - GAL253
Securon Seatbelt - Seat Mounted
Floor Mat Def110 - STC50173
A choice of retracting or static lap seat belts.
Rear middle floor mat made from a heavy duty rubber construction for
station wagon model.
Auto Lap Seatbelt - GSB2220
Static Lap Seatbelt - GSB210
GEN
ALL
GEN
ALL
ALL
Rear Lower Light Guards - GAL019
Black plastic coated steel rear lower light guards, sold as a pair with
fitting kit.
For high capacity pick-up use - GAL022
ALL
Rear Light Guard Set - GAL0198
Not suitable for High Capacity Pick Up or Vehicles with round fog and
reverse lights.
ALL
‘L’ Shaped Rear Light Guards - STC53157
Black powder coated steel rear "L" shaped light guard which allows
clearance for rear door mounted spare wheel.
OEM
Front Light Guards - STC53161G
Black powder coated steel bar type front light guards. Sold as a pair and supplied with
fitting kit and instructions. From Vin 2a on.
Black powder coated steel rear light guards suitable for the High Capacity
Pick up.
OEM
OEM
Front Light Guards - 345985
Black powder coated steel mesh type front light guards. Sold singularly. Use existing self
tapping screws.
Black powder coated steel rear light guards suitable for vehicles without
rear door mounted spare wheel.
OEM
ALL
Rear Top Light Guards - GAL018
Driving Lights - VUB500890
Black plastic coated steel rear top light guards, sold as a pair with fitting kit.
Not suitable for High Capacity Pick Up or vehicles with round fog and
reverse lights.
Land Rover 8” 55w driving lights.
Supplied with wiring loom and fitting kit.
OEM
ALL
GEN
ALL
Black plastic coated steel set of all 4 rear light guards with fitting kit.
Wind Deflectors
Ram Air Intake Cover
Def up to 2004 front - GWD001
Def 2004 on front - GWD008
ALL
Def all modles rear - GWD101
This stylish plastic moulded ram air intake improves the performance of your
heater by forcing air into the system.
High profile air intake
Near side - GAL173 Off side - GAL174
Low profile air intake
Near side - GAL175 Off side - GAL176
ALL
Coverking Waterproof Seat Covers in Slate Grey
This stylish plastic moulded ram air intake with mesh grill improves the
performance of your heater by forcing air into the system. Low profile only.
Near side - GAL177
Off side - GAL178
ALL
ALL
Ladder Rack - GAL027
Zinc plated steel box section ladder rack. Supplied as a pair of sturdy roof
bars including end stops and lashing points.
Black moulded soft bumper styling cover enhances the front end appearance
of your vehicle.
ALL
OEM
Steering Wheel - GSW005
Black powder coated steel ladder attaches to the rear body for easy access to
any roof rack. It incorporates the rear light guard and is supplied with fitting
Mountney black vinyl covered 15” 3-spoke replacement steering wheel.
Please ensure the correct steering wheel mounting boss is selected.
OEM
ALL
Steering Wheel Mounting Boss - GSW002/003
Dog Guard
Black mesh dog guard.
OEM
90 and 110 hardtop - RTC8095
110 (excluding station wagon) - VUB500510
OEM
90 without bulkhead 02MY onwards - STC50479
110 station wagon - STC7555
Steering wheel boss with 36 splines - GSW002
Steering wheel boss with 48 splines - GSW003
ALL
Ram Air Intake Cover with mesh grill
Front seat covers, up to 2007 - GSC200 Pair
Front seat covers, from 2007 - GSC206 Pair
Front centre seat cover - GSC201
110 2nd row 3 seat covers - GSC202 Set
110 2nd row 60/40 split seat covers - GSC203 Set
Rear split seat covers Def2007 - GSC207
Inward facing individual rear seat cover - GSC204
110 SW inward facing bench seat cover - GSC205
Raised Air Intake (1-NAS90) - GMN031
Raised Air Intake (1-DPFL-R) - GMN038
Suitable for North American Spec V8s only.
Mantec snorkel kit made from matt black Flexi Lite. Designed to reduce the amount of dust taken into the air
filter as well as increase the vehicle’s wading depth. Supplied with fitting kit and instructions.
Suitable for 300Tdi, Td5 & 2.4.
Raised Air Intake (1-DSV5) - GMN032
Raised Air Intake 1-DPSV-R04 - GMN035
Mantec snorkel kit made from zinc phosphated steel tube with a black polyester coating. Designed to reduce the
amount of dust taken into the air filter as well as increase the vehicle’s wading depth. Supplied with fitting kit and
instructions.
Suitable for 300Tdi & Td5.
ALL For vehicles fitted with a roll cage use - GMN037 (1-DSV5RC)
Mantec snorkel kit made from matt black polypropylene Designed to reduce the amount
of dust taken into the air filter as well as increase the vehicle’s wading depth.
Suitable for 300Tdi & Td5.
Raised Air Intake (1-DPSV-L04) - GMN033
Raised Air Intake (1-DSV5-L) - GMN082
Mantec snorkel kit made from matt black polypropylene Designed to reduce the amount of dust taken into the
air filter as well as increase the vehicle’s wading depth. Supplied with fitting kit and instructions.
Suitable for TD & 200Tdi.
Suitable for TD & 200Tdi.
ALL
For vehicles fitted with a roll cage use - GMN083 (1-DSV5-LRC)
ALL
ALL
Raised Air Intake
Raised Air Intake Kit
Suitable for V8 up to 1986 GMN034 (1-DEXV8)
NAD up to 1986 GMN036 (1-DEX04)
Safari snorkel kit manufactured from heavy duty black plastic. Designed to reduce the amount
of dust taken into the air filter as well as increase the vehicle's wading depth. Supplied with
TD & 200 Tdi
GSS014
V8
GSS015
OEM
300Tdi
GSS016
Td5 RHD
GSS017
Td5 LHD
GSS019
Mantec Raised Air Intake - along wing type
Raised Air Intake - 300Tdi/Td5 - LR008383
3.5 Petrol LH Wing Fitting - 1-AW3.5L
3.5 Petrol RH Wing Fitting - 1-AW3.5R
3.9 Petrol LH Wing Fitting - 1-AW3.9L
3.9 Petrol RH Wing Fitting - 1-AW3.9R
Metal air intake with Coopers OE mushroom top filter, air intake gasket and fixing clips.
ALL
ALL
ALL
Mantec Wading Kit
2.5 Norm Asp Diesel >1989 - 10-WK1-NA
Turbo Diesel - 10-WK1-TD
200Tdi - 10-WK1-TDI-200
300Tdi - 10-WK1-TDI-300
Series 1/2/3 - 10-WK2
ALL
TD5 - 10-WK3-TD5
GEN
ALL
ALL
ALL
Ball and Pin Coupling - 3.5t - RTC8159
Alloy Steering Guard
3.5 tonne ball and pin coupling allows trailers with 50mm ball or ring hitches to be towed.
The coupling is also preferred for safe recovery using a rope or strap. Suitable for all
towing kits.
Heavy duty 8mm solid aluminium steering guard, bolts directly onto existing
chassis mounting points.
Available in black - RTC8159B
For further Witter towing options please see page 122.
RHD - GAL045
LHD - GAL046
ALL
Ball and Pin Coupling 2Ton >1998 - 559636
Alloy Steering Guard RHD - GAL047
Jaw hitch allows trailers with a ring hitch to be towed and is also preferred for safe recovery
using a rope or strap.
Heavy duty 8mm aluminium steering guard with holes, bolts directly onto
ALL
ALL
Alloy Steering Guard LHD - GAL048
Dixon Bate Pintle Hitch also known as a Nato Hitch allows trailers with a ring hitch to be towed
allowing 360 degrees of rotation. It is ideal for towing off road and is also preferred for safe
recovery using rope or strap.
Heavy duty 8mm aluminium steering guard with holes, bolts directly onto
OEM
ALL
Towing Electric Kits
Alloy Steering Guard - GMN070
N type trailer lighting kit 90/110 all models up to 1998 - RTC8872
N type trailer lighting kit 90/110 Td5 from 1998 - YWJ101500 (Allmakes brand)
N type trailer lighting kit 90/110 Td4 from 2007 - LR005920
S type caravan electric kit 90 Td5 from 1998 - STC50303
S type caravan electric kit 110 Td5 from 1998 - STC50324
OEM
S type caravan electric kit 90/110 Td4 from 2007 - LR005921
Mantec heavy duty 8mm solid aluminium steering guard, bolts directly onto
ALL
Alloy Fuel Tank Guard - GMN061
Winch Bumper
Black powder coated steel commercial winch bumper.
Winch Bumper (non AC) for Superwinch winch
Winch Bumper (with AC) for Superwinch winch
Winch Bumper (non AC) for Warn winch
Winch Bumper (with AC) for Warn winch
TF002S
TF002ACS
TF002W
TF002ACW
Mantec heavy duty 8mm solid aluminium fuel tank guard bolts directly onto
existing chassis mounting points. Supplied with fitting kit and instructions.
Suitable for 90 Td5, Td4 and 50th Anniversary V8.
ALL
ALL
Rear Winch Bumper - Up to 1998 - GWK 005
Black powder coated 5mm steel rear winch mounting bumper. Suitable for
most makes & models of mid range winches and attaches by 16 mounting
points. This bumper allows for tow bars to be fitted and can be fitted to all
models but is best suited to vehicles with rear mounted fuel tanks.
(Winch not included).
Alloy Fuel Tank Guard - GMN060
Mantec heavy duty 8mm solid aluminium fuel tank guard bolts directly onto
Suitable for 110 Td5 and Td4
ALL
ALL
GEN
ALL
ALL
Spare Wheel Carrier - GAL075
Door Seal - GDS91
This simple swing away spare wheel carrier bolts onto the rear chassis
cross member as well as the rear body. Held open and closed with a
simple manually operated latch mechanism.
Replace your own door seals economically with this 25m roll of easy to fit
push on door seal, almost identical to the genuine pre-cut seals but in a
long length.
ALL
Spare Wheel Carrier
ABS Door Casing
Mantec swing away spare wheel carrier, bolts to chassis cross member as
well as the rear body capping. Also connected to the rear door with a
unique sliding coupling which allows the spare wheel carrier to open
simultaneously with the rear door. Supplied with fitting kit and instructions.
Vehicles up to 2002 - GMN050 (2-SA50/7)
Vehicles from 2002 - GMN051 (2-SA50-02/7)
ALL
Black door casing, lift up handle type.
Air Lift Kit
ABS Door Casing
Air lift kit contains two rear spring airbags complete with fittings to provide
additional load carrying and stability when inflated inside the rear coil springs.
The Air Lift Compressor GAK100 is required.
Door casing, push button type.
Def90 - GAK101
Def110 - GAK103
ALL
Air Lift Compressor - GAK100
Air compressor kit comprising pump and pressure gauge etc for controlling
the GAK101/103 air bags for additional load carrying and stability.
ALL
RH - GAL230
LH - GAL231
ALL
Black RH - GAL232
Black LH - GAL233
Grey RH - GAL234
Grey LH - GAL235
ALL
Mantec Steel Security Cubby Box - 4-SB-07
The Mantec Security Box is designed for expedition use to store basic
valuables and documents. The Security Box replaces the original cubby box
or front centre seat. The Security Box has a black padded lid fitted with hinge
and retaining chain. The main body is built in steel finished in black polyester
powder and anti dust seal. Its strongest feature is the 3 point locking
mechanism, specially designed to be resistant to levers. 2 keys are supplied.
Height of 330mm, length 500mm and 280mm wide.
ALL
Worklamp - GWL001
Cubby Box
Single round adjustable worklamp, polycarb lens and switch on rear.
This sturdy cubby box provides valuable storage space, vinyl covered for
easy cleaning and fabric lined to protect contents. The foam cup holder
section can be removed as required.
Available in grey or black and suitable for all models.
Grey - GCB001
ALL
Black - GCB002
ALL
Stainless Steel Extended Brake Hoses
Light Bar - GLB001 (AS PICTURED)
Improve brake performance and ideal for
lifted vehicles.
Def 90 1994-98 - TLR0105-3P2
Def 90 From 1999 - TLR0108-4P2
ALL
Def 110 1994-98 - TLR0106-3P2
Satin black powder coated steel tubular roof light bar designed to accept 4
lights which can be mounted above or below the mounting brackets.
(GLB002 - CURVED & INSET)
(Lights supplied separately)
ALL
GEN
ALL
ALL
Wheel - GRW001
Wheel - GRW005
White 8 spoke 7 x 16 steel road wheel.
Silver modular 7 x 16 steel road wheel.
ALL
Wheel - GRW002
Wheel - GRW006
Silver 8 spoke 7 x 16 steel road wheel.
Black modular 7 x 16 steel road wheel.
ALL
ALL
Wheel - GRW003
Wheel - GRW007
Black 8 spoke 7 x 16 steel road wheel.
Offender 8 x 16 alloy road wheel.
ALL
ALL
Wheel - GRW004
White modular 7 x 16 steel road wheel.
XS Deep dish wheel 7 x 16, silver powder coated.
No nuts/caps.
OEM
ALL
Boost alloy wheel 7 x 16 silver powder coated.
No nuts/caps.
OEM
ALL
GEN
ALL
ALL
RR CLASSIC
65
64
DEFENDER
Headlamp Conversion Kit
Satin aluminium side steps with stylish rubber anti slip inserts and plastic
moulded end caps. These side steps bolt directly onto existing
mounting points.
7” halogen headlamp conversion kits.
RHD - GDL003 Ring GDL003G Wipac
LHD - GDL007 Ring GDL006 Wipac
ALL
OEM
Rubber Top Side Steps - GAR041
ALL
ALL
Mesh Dog Guard - GAR034
Raised Air Intake (1-RRV8/Tdi) - GMN020
Black powder coated steel mesh dog guard. The guard is easily removable
without tools and can be used in conjunction with loadspace protectors
and liners.
Supplied with fitting kit and instructions. For vehicles with split rear seats.
Mantec snorkel kit made from zinc phosphated steel tube with a black polyester coating. Designed to
reduce the amount of dust taken into the air filter as well as increase the vehicle’s wading depth.
ALL
ALL
Bar Type Dog Guard - GAR035
Securon Rear Seat Belts - GSB264
Black powder coated steel bar type dog guard. The guard is easily
protectors and liners.
Supplied with fitting kit and instructions. For vehicles with split rear seats.
BS Approved Inertia seat belts.
ALL
ALL
Front Light Guards
Securon Seat Belts >86
Black plastic coated light guards, hinged for easy cleaning. Supplied as a
pair with a fitting kit and instructions.
Seat Mounted Auto Lap Seatbelt - GSB2220
Seat Mounted Auto Static Seatbelt - GSB210
ALL
- GAR020
ALL
OEM - STC8026
Seat Covers
Black powder coated light guards, hinged for easy cleaning and servicing.
Supplied as a pair with a fitting kit and instructions.
Coverking waterproof front seat covers to enhance and protect your seats. Supplied as a pair in slate
grey. Made from textured polyester. Can be wiped clean.
Front seat covers (4 door) - GSC228 Pair
Front seat covers (2 door) - GSC229 Pair
Split rear seat covers - GSC230 Set
Solid bench rear seat cover - GSC231
OEM
GEN
ALL
ALL
67 RANGE ROVER CLASSIC
Wheel - 8 Spoke
Heavy duty 8mm aluminium steering guard bolts directly onto existing chassis
mounting points.
White 8 spoke 7x16 steel road wheel - GRW001
Silver 8 spoke 7x16 steel road wheel - GRW002
Black 8 spoke 7x16 steel road wheel - GRW003
ALL
ALL
Mantec Alloy Steering Guard - 3-SG-DIS
Wheel - Modular
Mantec guard manufactured using a steel frame with an 8mm thick
aluminium blade.
White modular 7x16 steel road wheel - GRW004
Silver modular 7x16 steel road wheel - GRW005
Black modular 7x16 steel road wheel - GRW006
ALL
ALL
Differential Covers
Wheel - GRW007
Offender 8x16 alloy road wheel.
ALL
Front - GAL149
ALL
Rear - GAL150
Dixon Bate Pintle Hitch also known as a Nato Hitch allows trailers with a ring
hitch to be towed allowing 360 degrees of rotation. It is ideal for towing off
road and is also preferred for safe recovery using rope or strap.
XS Deep dish alloy wheel 7x16, silver powder coated.
No nuts/caps.
OEM
OEM
Ball and Pin Coupling - 3.5t - RTC8159
3.5 tonne ball and pin coupling allows trailers with 50mm ball or ring hitches
to be towed. The coupling is also preferred for safe recovery using a rope or
strap. Suitable for all towing kits.
Boost alloy wheel 7x16, silver powder coated.
No nuts/caps.
OEM
Available in black - RTC8159B
For further Witter towing options please see page 122.
OEM
RR Classic CD-Rom
Incorporates Parts Catalogue, Workshop Manual and
Drivers Handbook.
ALL
RR Classic >1985 - LHP1
RR Classic 1986> - LHP2
RR Classic North America 1987-95 - LHP29
GEN
GEN
ALL
Alloy Steering Guard - GARS10
RR P38
71
70
RR CLASSIC
Rubber Top Side Steps - GAN012
Towing Kit - STC8543AA
Black moulded rubber top side steps, finished with a stylish tread pattern
and moulded end caps. These side steps bolt directly onto existing
mounting points.
Witter towing kit includes tow ball and electrics (Not swan neck).
ALL
Rubber Top Side Steps - STC8505AA
Black moulded rubber top side steps, finished with a stylish tread pattern
and moulded end caps. These side steps bolt directly onto existing
mounting points.
These contoured rubber mats fit directly into the front footwells keeping them
OEM
ALL
Bar Type Dog Guard - STC8524
Black powder coated steel bar type dog guard. The guard is easily removable
without tools.
These contoured rubber mats fit directly into the rear footwells keeping them
OEM
ALL
Front Light Guards - STC8503AA
Lead Sets
Black plastic front light guards.
Complete 4.0/4.6, 8mm black silicon numbered lead set - GWS100
(Also for Discovery)
Complete 4.0/4.6, 7mm black silicon numbered lead set - GWS101
(Also for Discovery)
OEM
ALL
Rear Light Guards - STC8504AB
Lead Set v8 99on - GWS102
Black plastic rear light guards. Sold as a set of 4, rear body and tailgate.
Supplied with fitting kit and instructions
Complete 7mm black silicon numbered lead set for v8 vehicles from 1999.
ALL
OEM
Seat Covers
protection from rain, whilst driving with the windows down. Easily DIY installed
by simply slotting into the window channel. Supplied as a pair.
textured polyester fabric which is comfortable to sit on and slide resistant.
Front - GSC232 (Pair)
Rear - GSC233 Set
ALL
GEN
ALL
ALL
73 RANGE ROVER P38
72 RANGE ROVER P38
ALL
Air to Coil Spring Conversion - GSK001
Wheel - GRW008
This is a complete coil spring conversion kit including the electronic override
module. When repairs to Range Rover P38 air suspension are not cost
effective, this EAS to Coil kit is the solution. Contains all parts required
including fitting instructions.
ALL
EAS Override Lead - GEASR2
Wheel - GRW009
Overide module for air suspension on P38 coil conversion.
ALL
ALL
Wheel - GRW010
handling, cornering and stability as well as increased steering lock.
ALL
ALL
GEN
ALL
75 RANGE ROVER P38
74 RANGE ROVER P38
ALL
RR L322
77
76
RR P38
Satin Aluminium Side Steps - VUB503660
Rubber Moulded Loadspace Mat - LR003894
Satin aluminium side steps with stylish rubber anti slip insert and
mounting points.
This rubber mat fits directly into the loadspace keeping it free from mud and
dirt. It provides much needed traction for your pet and helps prevent your
goods from sliding around.
OEM
Stainless Steel Side Runners - VUB001230
Boot Tray - GLP114
Polished stainless steel tubular side runners. These side runners bolt
directly onto existing mounting points.
This semi rigid black boot tray fits directly into the loadspace area to keep it
free from mud and dirt. It provides some much needed traction for your pets
and helps prevent your cargo from sliding around.
OEM
ALL
Front Light Guards
Front Seat Covers
Black plastic front light guards. Sold as a pair.
Up to VIN 6A198415 - VUB001070
From VIN 6A198416 - VUB502610
polyester which is comfortable to sit on and slide resistant. Can be wiped
clean to restore look.
Seats with air bags - GSC234 Pair
ALL
Vogue seats without air bags - GSC235 Pair
Vogue seats with air bags - GSC236 Pair
OEM
Rear Seat Covers - GSC237 Set
Black plastic rear light guards. Sold as a pair. Supplied with fitting kit and
instructions.
Coverking waterproof rear seat covers to enhance and protect your seats
polyester which is comfortable to sit on and slide resistant. Can be wiped
clean or gently machine washed to restore look.
OEM
ALL
Mesh Dog Guard - VUB002120
Front Spoiler - RRV002A
Black powder coated steel mesh dog guard. This guard prevents objects
moving forward when the rear seats are in the seating position.
Kahn design front spoiler, performance styling at its best.
For further Kahn products please see page 133.
OEM
ALL
Wheels
Black moulded soft bumper styling cover enhances the front end appearance
of your vehicle.
9 spoke Stormer 9.5" x 20" alloy road wheel - GRW008
9 spoke Diamond Stormer 9.5" x 20" alloy road wheel - GRW009
10 spoke Diamond Sport 9.5" x 20" alloy road wheel - GRW010
ALL
OEM
GEN
ALL
79 RANGE ROVER L322
78 RANGE ROVER L322
OEM
RR SPORT
81
80
RR L322
Brushed Aluminium Side Steps - VPLSP0007
Mesh Dog Guard - GDG1062
Brushed aluminium side steps with stylish rubber anti slip tread.
These side steps bolt directly onto existing mounting points.
Grey powder coated steel mesh dog guard. This guard prevents objects
moving forward when the rear seats are in the seating position.
OEM
Front Seat Covers - GSC238
Black plastic front light guards. Sold as a pair.
OEM
ALL
Rear Seat Covers - GSC239
Black plastic rear light guards. Sold as a pair.
Coverking waterproof split rear seat covers to enhance and protect your
seats from everyday dirt and grime. Supplied as a set in slate grey.
Made from textured polyester fabric which is comfortable to sit on and is
slide resistant. Can be wiped clean or gently machine washed to
restore look.
OEM
ALL
Mirror Covers
Wheel - GRW008
ALL
ALL
Wheel - GRW009
ALL
Wheel - GRW010
ALL
GEN
ALL
83 RANGE ROVER SPORT
OEM
Mesh Front Grill - RRS002G
Stainless steel door handles 2005 on - GRS200
Kahn Design mesh front grill, performance styling at its best.
Enhance your Range Rover SPORT by fitting this precision made 8 piece
stainless steel door handle cover kit with highly polished chrome effect finish.
These covers fit over the grey painted door handles on your vehicle with
amazing results.
Mesh Side Vents - RRS002H
Bezel Chromed Fog lamp - GRS201
Kahn Design mesh side vent grills, designed to match the front grill,
performance styling at its best.
These precision made highly polished stainless steel fog lamp surrounds,
fit over the plastic fog lamp bezels in the bumper to change the appearance
of the front of the car. The visual impact is to make the fog lamps look much
bigger and more in proportion. The kit includes two highly polished stainless
steel rings with pre-applied automotive grade self-adhesive
ALL
tape and a pre-cleaning wipe.
GEN
Semi Rigid Waterproof Boot Tray - GLP115
HSX Silver Grey Front Grille - GRS202
This semi rigid boot tray fits neatly into the loadspace area keeping it free
from mud and dirt. It provides much needed traction to help prevent cargo
from sliding around.
This new grille is a high quality injection moulded replacement grille
with a moulded "Bentley style" mesh. The grille is designed to protrude
forward more than the standard grille, it is finished with a silver centre
mesh and dark grey frame. This will fit all models of the Range Rover
Sport from launch in 2005 including TDV6 TDV8 and
ALL
Supercharged and HST models.
ALL
This rubber mat set fits in both front and rear
footwells and has raised lips to hold water in.
Twin Exhaust tail pipe tips - GRS203
This is a pair of exhaust tips that fit over the end of the existing Range Rover
Sport exhaust with no modification to the car or exhaust required.
Made from premium grade stainless steel, these items are guaranteed not to
rust or tarnish.
ALL
ALL
GEN
ALL
ALL
ALL
RR SPORT
SPECIALIST
ACCESSORIES
Off-Road Pursuits - On the road style
87
86
For the enthusiasts amongst you, in our specialist section you will find a selection of our
Terrafirma products, complemented by performance enhancement, equipment for expeditions,
winching, towing and both interior and exterior trim.
From the Latin: meaning - Solid Earth
Shocks & Dampers
A tough twin tube design allows for a large volume of oil for cooler internals
and improved protection of working parts. Low-pressure nitrogen eliminates
cavitation and provides optimum oil viscosity for greater resistance to fade.
Special internal bump stops preserve the internal piston from impacts in
extreme conditions. High quality deep silver powder coated finish resists
corrosion for long lasting good looks.
The Terrafirma range of Land Rover accessories has been created
to meet the demands of Land Rover enthusiasts and is
distributed Worldwide through Allmakes 4x4 authorized parts
and accessory dealers.
Front - TF116
Rear - TF117
Terrafirma offers choice, clear product identification and
application, ensuring the correct product can be selected
from the extensive and increasing range of accessories.
Shock Absorber for Discovery 2
To satisfy the diverse requirements of 4x4 owners both
on and off road we have produced an amazing selection
of accessories for Land Rovers. The biggest category in the Terrafirma range is
'Suspension' which includes the largest range of upgrade shock absorbers,
steering dampers, coil springs and suspension hardware available
Long life heavy duty bushes
in the marketplace.
Double welding of piston shaft to
shock eye for maximum strength
High quality multi lipped seals
Strong 15mm piston shaft
Low pressure
nitrogen gas charged
Precision multi-stage valving
Other Terrafirma products also include: Performance exhausts,
cross drilled and grooved brake discs, Terrafirma Power Plug diesel
power upgrades, reinforced steering rods & adjustable panhard
rods, winch mounts & bumpers, rock sliders & under-body
protection and with many new products being evaluated and tested
for introduction in the near future Terrafirma is fast becoming one of
the most recognized 4x4 accessory brands in the World.
Featuring a tough twin tube design allowing a large volume of oil for cooler
internals and improved protection of working parts. Special internal bump
stops preserve the internal piston from impacts in extreme conditions.
Low-pressure nitrogen eliminates cavitation and provides optimum oil
viscosity for greater resistance to fade. High quality deep silver powder coated
finish resists corrosion for long lasting good looks.
Front - TF118
Rear - TF119
Shock Absorber for P38
Tough twin tube design allows for a large volume of oil for cooler internals
and improved protection of working parts. Low-pressure nitrogen eliminates
cavitation and provides optimum oil viscosity for greater resistance to fade.
Special internal bump stops preserve the internal piston from impacts in
extreme condition. High quality finish deep silver painted finish resists
corrosion for long lasting good looks.
Front - TF125
Rear - TF126
Strong twin tube construction
To view the full range of Terrafirma accessories go to
Large 35mm piston
Steel shroud/stone guard
Extreme temperature oil
for effective use in high
ambient temperatures
Attractive silver rust
resistant paint finish
www.terrafirma4x4.com
On this site you will also find many products from leading
manufacturers such as Lightforce, Green Cotton, Front Runner, Safari,
Optima, Safety Devices, Superwinch, Mantec, ARB, Warn and many
more, making Allmakes 4x4 a market leader in specialist Land Rover
accessories.
Quality, Value and Performance
Steering Dampers
A tough twin tube design allows for a large volume of oil for cooler
internals and improved protection of working parts. Low-pressure
nitrogen foam cell for increased performance.
50/50 valving for equal damping lock to lock. 36mm piston, 54mm
outer tube and 16mm shaft diameter. High quality deep silver
powder coated finish resists corrosion for long lasting good looks.
Disco1/RRC - TF811
Def90/110/130 - TF832
Disco2 - TF802
89 TERRAFIRMA SUSPENSION
Shock Absorber for 90/110/D1/RRC
Coil Springs
Terrafirma coil springs are designed to provide
approximately 2” of lift under a variety of different
loads. Improvements are achieved in load
carrying, ground clearance and towing both on
and off road. All springs are made from the
highest quality steel and have been shot peened
and scragged to ensure long spring life. Springs
are then powder coated Terrafirma silver for long
lasting good looks.
Please note: all lifts shown in this guide are approximate. The actual lift will vary depending on
the load carried and your individual vehicle set up. Increasing the load will reduce the lift, using a
heavier spring with less load will increase the lift but may effect wheel travel.
Typical vehicle showing
Light Load
Defender 90
Part No.
TF116
TF117
TF832
PB51-502K
TF014
TF018
TF015
TF015
TF023V
TF027V
Description
Front shock
Rear shock
Steering damper
Caster bush kit
Light load front spring
Medium load front spring
Heavy load front spring
Light load rear spring
Medium load rear spring
Heavy load rear spring
Load
Spring rate
Length (DS/PS)
Approx. lift
44mm only
0-50 kg
50-110 kg
150 kg
100 kg
200 kg
300 kg
200 lbf/in
230 lbf/in
220 lbf/in
220 ibf/in
300-340 lbf/in
360 lbf/in
400/390 mm
390/380 mm
430/420 mm
430/420 mm
420/410 mm
420/410 mm
40 mm
50 mm
50 mm
40 mm
50 mm
60 mm
Load
Spring rate
Length (DS/PS)
Approx. lift
44mm only
0-50 kg
50-110 kg
150 kg
150 kg
300 kg
500 kg
200 lbf/in
230 lbf/in
220 lbf/in
270 lbf/in
300 lbf/in
420 lbf/in
400/390 mm
390/380 mm
430/420 mm
435/435 mm
435/435 mm
435/435 mm
40 mm
50 mm
50 mm
50mm
50 mm
50 mm
Load
Spring rate
Length (DS/PS)
Approx. lift
44mm only
0-50 kg
50-110 kg
150 kg
100 kg
200 kg
300 kg
200 lbf/in
230 lbf/in
220 lbf/in
220 ibf/in
300-340 lbf/in
360 lbf/in
400/390 mm
390/380 mm
430/420 mm
430/420 mm
420/410 mm
420/410 mm
40 mm
50 mm
50 mm
40 mm
50 mm
60 mm
Load
Spring rate
Length (DS/PS)
Approx. lift
50 kg
75-150 kg
180 kg
300-340 lbf/in
395/375 mm
420/410 mm
40 mm
50 mm
200 kg
300 kg
300-340 lbf/in
360 lbf/in
420/410 mm
420/410 mm
50 mm
60 mm
Defender 110 & 130
Terrafirma 2” Lift Kits available for:
Defender 90
Light Load
Medium Load
Heavy Load
TF201
TF202
TF204
Defender 110/130
Light Load
Medium Load
Heavy Load
N/A
TF203
TF205
Discovery 1
Light Load
Medium Load
Heavy Load
TF201
TF202
TF204
Range Rover Classic
Light Load
Medium Load
Heavy Load
Medium Load
Description
Front shock
Rear shock
Steering damper
Caster bush kit
Discovery I & Range Rover Classic
TF201
TF202
TF204
Basic kits include:
4 x Terrafirma Springs and
4 x Terrafirma Shock Absorbers
Part No.
TF116
TF117
TF832
PB51-502K
TF014
TF018
TF015
TF010
TF019
TF011
Heavy Load
Part No.
TF116
TF117
TF811
PB51-502K
TF014
TF018
TF015
TF015
TF023V
TF027V
Description
Front shock
Rear shock
Steering damper
Caster bush kit
Discovery II
Part No.
TF118
TF119
TF802
N/A
TF042
TF052
N/A
TF023V
TF027V
Light Load: Vehicles with no additional
equipment fitted.
Medium Load: Vehicles fitted with some
additional weight such as under-body guards.
Heavy Load: Vehicles fitted with significant
off road equipment such as winches and
expedition equipment.
Description
Front shock
Rear shock
Steering damper
Suspension quick application guide
Brakes - Quick application guide
Please note: Solid & Vented marked to indicate where an option is available.
Freelander (Pre 01)
Front
Solid
SDB100830
Freelander (01 on)
Front
Vented
SDB101070CDG
Discovery 1
Front
Solid
Vented
Rear
FRC7329CDG
FTC902CDG
FTC1381CDG
Discovery 2
Front
Rear
SDB000380CDG
SDB000470CDG
Discovery 3
Front
SDB000604CDG
SDB000614CDG
SDB000636CDG
SDB000646CDG
SDB000646CDG
Rear
4.0 PETROL & V6 DIESEL
4.4 PETROL
4.0 PETROL & V6 DIESEL
4.4 PETROL
4.4 PETROL WITH DYNAMIC PACK
Defender 90
Front
Solid
Vented
Rear
Using
cross-drilled and grooved brake discs stopping in all conditions will be
further improved. Grooves are machined into the brake disc to force away the dust and gasses that
build up between the pad and disc, keeping the brakes cooler and reducing fade. The cross
drillings contribute to cooling and heat dissipation and also allow the gasses to escape.
FRC7329CDG
FTC902CDG
FTC1381CDG
Defender 110
Front
Solid
Vented
Rear
FRC7329CDG
FTC902CDG
FRC7329CDG To WA159806
Range Rover Classic
Front
Rear
Solid
Vented
FRC7329CDG
FTC902CDG
FTC1381CDG
Range Rover P38
Front
Rear
NTC8780CDG
SDB000470CDG
Range Rover L322
Front
Rear
NTC8780CDG
SDB000211CDG
Range Rover Sport
Front
Rear
SDB000604CDG
SDB000614CDG
SDB000636CDG
SDB000646CDG
V6 DIESEL
4.4 PETROL
V6 DIESEL
V8 PETROL
Terrafirma cross drilled and grooved brake discs achieve their full potential when combined with high quality brake pads
such as Lucas TRW.
Defender and Discovery equipped with solid front brake discs, can easily be upgraded to vented discs by fitting brake
callipers STC1266/67.
93 TERRAFIRMA BRAKES
92 TERRAFIRMA BRAKES
brakes offer increased bite from cold and excellent fade resistance in most
4WD braking situations. Whether it’s a steep rocky descent, ploughing through mud and water or
just daily driving, the brakes will give excellent performance.
Now available...
The New Terrafirma Accessories Brochure
www.terrafirma4x4.com
95 TERRAFIRMA
94 TERRAFIRMA
The new brochure for 2010 features Terrafirma’s complete range
of suspension and hardware upgrade accessories. It incorporates
many of the leading worldwide off-road brands as featured below;
providing you with a unique one stop for all your Land Rover
off-road kit.
“The intelligent vehicle
enhancement”
The Terrafirma Power plug is a highly
developed, pre-programmed state of the
art performance upgrade that works in
conjunction with the engine
management system already fitted to all
post 1998 diesel Land Rovers.
Coloured Silicone Hoses
Silicone intercooler and turbo hoses are designed to thrive on the high pressures and extreme
temperatures found in high performance engines. As such they will perform better and last longer,
especially if your Land Rover diesel engine has enhanced performance.
The result is improved engine efficiency.
Commonly known as ‘plug and play’ the
Power plug is quite straightforward to fit and will give
instant results, better performance and mpg!
Model
Freelander 1 Td4
Defender & Discovery Td5
Defender & Discovery Td5 ECU Extended wiring loom
Range Rover Td6
Discovery & RR Sport TdV6
Range Rover TdV8
Defender Td4
Freelander 2 Td4
Part No
TFPP041
TFPP051
TFEL052
TFPP061
TFPP071
TFPP081
TFPP091
TFPP100
All our hoses are manufactured from high
grade silicone polymer, and reinforced
with a high strength polyester fabric. This
gives an operating temperature range of
between -40ºC to +180ºC.
With polyester reinforcement and thicker
construction, Terrafirma silicone
intercooler and turbo hoses are far
superior to standard hoses and also look
fantastic too in bright blue, lime green
and orange colours.
Model
90/110/130 200TDI - Blue
90/110/130/D1/RRC 300TDI - Blue
90/110/130 TD5 - Blue
D2 TD5 - Blue
90/110/130 TD4 - Blue
90/110/130 200TDI - Green
90/110/130/D1/RRC 300TDI - Green
90/110/130 TD5 - Green
D2 TD5 - Green
90/110/130 TD4 - Green
90/110/130 200TDI - Orange
90/110/130/D1/RRC 300TDI - Orange
90/110/130 TD5 - Orange
90/110/130 TD4 - Orange
D2 TD5 - Orange
Part No
TF720
TF721
TF722
TF723
TF724
TF725
TF726
TF727
TF728
TF729
TF730
TF731
TF732
TF733
TF734
97 PERFORMANCE
96 PERFORMANCE
For serious off-roaders we also offer an extension loom
for Defender and Discovery Td5 allowing the ECU to be relocated high up in the vehicle.
The Terrafirma range of 'de-cat' down pipes and silencer replacement pipes are intended to
improve the performance and economy of diesel Land Rovers.
Save a fortune when your catalytic converter fails by fitting
a Terrafirma 'de-cat' down pipe and enhance
the performance and economy
by de restricting the
exhaust system.
High
Performance
Air Filters
Remove the power de-restricting and vulnerable centre silencer and fit a Terrafirma silencer
replacement pipe and enjoy the new throaty exhaust sound.
98 PERFORMANCE
Made from 1.5mm 409 stainless steel these pipes should considerably outlast the life of the
original system. Guaranteed for 10 years.
Model
90/110/130 200TDI - CENTRE SILENCER REPLACEMENT PIPE
90 PRE '97 300TDI - CENTRE SILENCER REPLACEMENT PIPE
90 '97 ON 300TDI - CENTRE SILENCER REPLACEMENT PIPE
110 300TDI - CENTRE SILENCER REPLACEMENT PIPE
90 TD5/TD4 - CENTRE SILENCER REPLACEMENT PIPE
11O TD5/TD4 - CENTRE SILENCER REPLACEMENT PIPE
D1 V8 3.9 - CENTRE SILENCER REPLACEMENT PIPE
D1 200TDI - CENTRE SILENCER REPLACEMENT PIPE
300TDI - CENTRE SILENCER REPLACEMENT PIPE
D2 TD5 - CENTRE SILENCER REPLACEMENT PIPE
90/110/130/D1/RRC 300TDI - REPLACEMENT CAT FRONT DOWN PIPE
90/110/130 TD4 - REPLACEMENT CAT FRONT DOWN PIPE
90/110/130/D2 TD5 - REPLACEMENT CAT FRONT DOWN PIPE
Part No
TF550
TF551
TF552
TF553
TF554
TF555
TF556
TF557
TF558
TF559
TF560
TF561
TF562
The No.1
motor sport
air filter
in the world!
Most filters use a simple pressure moulded
injection process to bond the perimeter rubber
to the filter. This results in rubber seeping onto
the filter surface, creating a barrier.
NTC6660
ESR4238
PHE500060
Discovery 1
D1 200tdi
D1 3.5/3.9V8 -94
D1 300tdi/3.9V8 94-
G491611
R760022
P360468
ESR1435/ESR2623
RTC4683
ESR1445
Discovery 2
D2 Td5/4.0V8
P918290
ESR4238
Discovery 3
D3 TdV6/4.4V8
P970040
PHE000112
Range Rover Classic
RRC 3.5/3.9V8 -94
RRC 300tdi/3.9V8 94-
R760022
P360468
RTC4683
ESR1445
Range Rover Sport
RRS TdV6/4.4V8
P970040
PHE000112
Range Rover L322
RR L322 Td6 02RR L322 4.4V8 02-06
G491609
G591009
PHE000040
PHE000050
This barrier can reduce surface area by up to
10-15% thus decreasing the amount of air
flowing through the filter and reducing
performance.
Universal Items Green Cotton Part No
Universal filters
75mm dia. Cone
K4.75
65mm dia. Cone
K3.65
75mm dia. Cylinder
B3.75
65mm dia. Cylinder
B3.65
Green Cotton air filters use a more timeconsuming and precise production process
that virtually eliminates rubber seepage onto
the filter surface, thus maximising air flow and
increasing engine performance!
Universal filter cover sock
SUITS K4.75,B3.75,B3.65 G9034
SUITS K3.65
G9010
The deep pleats in the double-layered cotton
create a 10-20% increase in filtration surface
area. This increase allows a greater volume of
air to move more freely into the engine.
LR Part No
Service items
CLEANING KIT
CLEANING FLUID 1 litre
CLEANING FLUID .5 litre
FILTER OIL
NH01
NET1
NET05
H300
99 PERFORMANCE
Exhaust Pipes
Model
Green Cotton Part No
Defender
90/110/130 200/300tdi G491611
90/110/130 Td5
P918290
90/110/130 Td4
P950406
Shock Absorbers - Options...
Allmakes shock absorbers
BOGE shock absorbers
Comfort and safety first
BOGE has been chosen by the world’s leading vehicle
manufacturers as original equipment for consistent superior ridecontrol with the highest quality. BOGE products are built to exacting
standards leaving no room for shortcuts or compromise.
Allmakes 4x4 quality shock absorbers are manufactured by OEM suppliers.
• Improved braking (up to 20%)
• Superior ride control
All of our suspension options are designed as oil or gas replacements to the standard shock
absorber fitted by the manufacturer, so we use standard part numbers where possible.
• Significant noise reduction
• Reduced tyre wear
• Optimal driving comfort
• Lifetime guarantee
For those shock absorbers fitting multiple applications, we apply a new part number - see following
Fitting Guide.
• Constant performance
• Safety
• Superb value - competitive prices
• Adhere to strict safety-critical
quality standards
Delphi shock absorbers
High pressure damper utilising single bore technology
• Direct replacement dampers and
rationalised dampers that fit
multiple applications available
• An OEM supplier to Land Rover
• Exclusive monodisc design- isolates
vehicle ride without sacrificing handling
• Easy assembly to vehicle- can be
mounted at any angle
De Carbon shock absorbers
• Lighter weight -29% lighter than
equivalent twin tube designs
• Eliminates lag and fade- better wheel
and body control
• Also available in controlled ride
applications - automatically maintains
vehicle height as well as automatic
adjustment to road conditions
High performance mono tube high pressure gas
• Better fade resistance
• Since there is no outer tube, cooling is much
better which gives a drastic reduction in fade,
thus more consistent handling and control
• Better durability
• Single-tube construction also allows for a
larger internal working area, reducing stress
and fatigue for better durability
• De Carbon’s monodisc valving system
features a single moving part that drastically
reduces inertia and friction, to improve
durability and performance
• Better cooling of the mono tube design
results in lower operating temperatures and
thus longer life
• No need for re-adjustment
Monroe Adventure Shock Absorbers
• The viscosity of hydraulic fluid changes as
temperature changes. The high pressure gas
compensates immediately and automatically
for changes in viscosity
Freedom with maximum control, performance and safety
• High performance on-road and off-road
• Adapted to heavy duty conditions
• Optimum damping control that ensures a superb tyre to
road contact
• Maximum efficiency
• Strong and durable
101 PERFORMANCE
100 PERFORMANCE
• Manufactured by an OEM supplier
Front Shock Absorbers
DEFENDER
90
To VIN WA
90
From VIN XA to VIN 7A738815
110
To VIN WA
110
From VIN XA
130
From VIN XA to Vin 7A
90 - 110
102 PERFORMANCE
DISCOVERY 1
All models
1989 - 1998
DISCOVERY 2
Without ACE up to VIN 2A999999
With ACE and coil springs up to VIN 2A999999
With ACE and air springs up to VIN 2A999999
From VIN 3A000000
FREELANDER
1997 - 2000 1.8 - RH
1997 - 2000 1.8 - LH
2001 - > VIN 1A336547 1.8 - V6 - TD4 - RH
2001 - > VIN 1A336547 1.8 - V6 - TD4 - LH
2001 - ‘04 VIN 1A336548 > 1.8 - V6 - TD4 - RH
2001 - ‘04 - VIN 1A336548 > 1.8 - V6 - TD4 - LH
1997 - 2000 2.0D - RH
1997 - 2000 2.0D - LH
Allmakes
BOGE
Allmakes
BOGE
Allmakes
Monroe Adventure
BOGE
Allmakes
BOGE
Allmakes
BOGE
Allmakes
De Carbon
STC3766
STC366G
RSC100040
RSC10040G
STC3769
STC3769AM
STC3769G
RSC100050
RSC100050G
RSC100050
RSC100050G
GRS100
GAS100
Allmakes
Monroe Adventure
BOGE
Allmakes
De Carbon
STC3703
STC3703AM
STC3703G
GRS100
GAS100
Allmakes
Monroe Adventure
Allmakes
Monroe Adventure
Allmakes
Allmakes
Monroe Adventure
RNB103533
RNB103533AM
RNB103683
RNB103683AM
RNB103694
RNB000270
RNB103694AM
Delphi
Delphi
Delphi
Delphi
Delphi
Delphi
Delphi
Delphi
RNB103540
RNB103550
RSC000020
RSC000030
RSC000040
RSC000050
RNB103560
RNB103570
Rear Shock Absorbers
DEFENDER
90
VIN WA
90
From VIN XA159807
110
To end VIN WA
H/Duty 110 & all 130 to end VIN WA
110 & 130 from VIN XA159807
90 - 110
DISCOVERY 1
All models
1989 - 1994
1994 - 1998
DISCOVERY 2
Without ACE with coil springs up to VIN 2A999999
Without ACE with air springs up to VIN 2A999999
With ACE & coil springs up to VIN 2A999999
With ACE & air springs up to VIN 2A999999
FREELANDER 1
1997 - 2000 1.8 - V6 - 2.0D - TD4 - RH
2001 > ‘04 1.8 - V6 - 2.0D - TD4 - RH
1997 > 2000 1.8 - V6 - 2.0D - TD4 - LH
2001 > 2004 1.8 - V6 - 2.0D - TD4 - LH
RANGE ROVER CLASSIC
From GA417085
To GA417084
All models
RANGE ROVER CLASSIC
1986 > 1994 less roll bar
1986 > 1991 with roll bar
All models
Allmakes
BOGE
Allmakes
Allmakes
De Carbon
STC2829
STC2829G
STC207
GRS100
GAS100
Allmakes
BOGE
Allmakes
BOGE
Allmakes
Monroe Adventure
BOGE
Allmakes
BOGE
Allmakes
BOGE
Allmakes
De Carbon
STC3767
STC3767G
RPM100070
RPM100070G
STC3771
STC3771AM
STC3771G
STC3772
STC3772G
RPM100080
RPM100080G
GRS101
GAS101
Allmakes
Monroe Adventure
BOGE
Allmakes
De Carbon
Allmakes
De Carbon
STC3704
STC3704AM
STC3704G
GRS101
GAS101
GRS102
GAS102
Allmakes
Monroe Adventure
Allmakes
Monroe Adventure
Allmakes
Monroe Adventure
Allmakes
Monroe Adventure
RPD102333
RPD102333AM
RPD102363
RPD102363AM
RPD102343
RPD102343AM
RPD102354
RPD102354AM
Delphi
Delphi
Delphi
Delphi
RPD102180
RPM000020
RPD102190
RPM000030
Allmakes
Monroe Adventure
BOGE
Allmakes
BOGE
Allmakes
De Carbon
STC3939
STC3939AM
STC3939G
STC3941
STC3941G
GRS102
GAS102
Allmakes
BOGE
De Carbon
Allmakes
BOGE
Allmakes
Allmakes
BOGE
RTC4472
RTC4472G
GSD101
STC786
STC786G
QHH100001
STC786
STC786G
Steering Dampers
Defender 90, 110 & 130 - All inc. 2007 MY
Discovery 1 - All models
Discovery 2 - All models
Range Rover Classic - All models
103 PERFORMANCE
Shock Absorbers - Fitting Guide
Polybush Kits
The most comprehensive range of polyurethane suspension bushes for Land Rover vehicles.
With 3 grades available it is possible to select the perfect bushes for any application and working
environment. Increased durability, tear and shear resistance, together with the usual polyurethane
benefits of long life and resistance to oils and fluids.
Classic or Performance.
The red bushes are produced from a stiff material providing a firm, taut precise ride. Ideal for sports or heavy-duty
commercial applications.
104 PERFORMANCE
Comfort.
The blue bushes closely resemble the comfort of the original
rubber bushes with increased resilience and performance in
extreme conditions.
Dynamic.
The new orange bushes are designed to
meet the requirements of modern 4x4
vehicles comfort and flexibility combined with
firm precise handling. Most of the competition
range of bushes have also been produced using this
unique material.
Polybush - Quick application guide
Polybush Qty Allmakes Part No
Part No in Kit PERFORMANCE
Allmakes Part No
COMFORT
Allmakes Part No
DYNAMIC
Land Rover
Part No
1A
1B
4
4
GAL111R
GAL112R
GAL111B
GAL112B
NTC7307/1774
NTC6860/6781
1C
2
GAL113R
GAL113B
NTC1772
1D
2
GAL114R
GAL114B
NRC9728/ANR3410
1E
1F
1G
2
2
2
GAL115R
GAL116R
GAL117R
GAL115B
GAL116B
GAL117B
575580
572180
NRC7591/NTC9027
1H
4
GAL118R
GAL118B
NRC4514
1P
1Q
1AB
1AD
1AE
1AF
1AM
4
2
4
4
2
2
1
GAL121R
GAL122R
GAL121B
GAL122B
572068
NTC1773
RBX101680
ANR6947
RGX100970
RBX101690
ANR4189
GAL137
GAL138
GAL139
GAL140
GAL141R
Description
Early Defender front radius arm to axle
Disco 1, Range Rover from 1986 & Defender from 1993 front radius arm
to axle
Disco 1, Range Rover from 1986 & Defender from 1993 rear radius arm
to axle
Disco 1, Range Rover from 1986 & Defender from 1993
panhard rod
Early Range Rover panhard rod
Early Range Rover rear radius arm to chassis
Disco 1, Range Rover from 1986 & Defender from 1993 rear radius arm
to chassis
Disco 1, Range Rover from 1986 & Defender from 1993 front radius arm
to chassis
Classic Range Rover Pre 1986 front radius arm to chassis
Disco 1, Range Rover from 1986 & Defender from 1993 A frame
Disco 2 front radius arm to axle
Disco 2 rear radius arm to axle
Disco 2 Watts link to chassis
Disco 2 anti roll bar non active
Disco 1, Range Rover & Defender 2 hole bump stop
Allmakes Part No
COMFORT
Allmakes Part No
DYNAMIC
Land Rover
Part No
GAL126B
GAL126
GAL142
GAL143
ANR4188
RBX101340
ROA100040
ROA100050
NRC7591/NTC9027
1AN
1AS
1AT
1AU
1AV
1
2
2
2
2
GAL142R
GAL144R
1AW
1AX
2
1
GAL146R
RBX1011181
ANR4189
1AY
1
GAL147R
ANR4188
1AZ
2
1BA
1BC
1XB
1XC
1XE
1XH
1XK
1XN
1XP
1XQ
1XR
1XS
1XX
1XY
Kit 1
Kit 2
2
2
4
2
2
2
2
2
2
6
2
2
2
2
GAL145
GAL148
GAL151R
GAL100
GAL101
GAL104
GAL105
GAL152
GAL123
GAL124
GAL125
GAL127
GAL153
GAL154
GAL155
GAL156
GAL157
GAL158
GAL159
GAL161
GAL104D
GAL105D
Kit 3
Kit 6
Kit 7
Kit 8
Kit 12
GAL102
GAL119R
GAL120R
GAL162R
GAL163R
GAL106
GAL119B
GAL120B
GAL162B
GAL163B
GAL106D
GAL119D
GAL120D
GAL162D
GAL163D
Kit 13
Kit 15
Kit 16
Kit 17
Kit 18
Kit 20
Kit 23
Kit 51
Kit 68
Kit 69
Kit 100
GAL164R
GAL165R
GAL129
GAL166R
GAL167R
GAL164B
GAL165B
GAL129B
GAL166B
GAL167B
GAL130R
GAL109
GAL131
GAL130B
GAL110
GAL164D
GAL165D
GAL129D
GAL166D
GAL167D
GAL128
GAL132
GAL123B
GAL124B
GAL125B
GAL127B
GAL108
GAL160
GAL107
RBX101340
NRC9728/ANR3410
RBX101730
ANR3332
ANR2563
ANR3285
ANR3305
RBX101240
RGX101000
RGX101010
RGX101020
RGX101030
RBX101790
RBX101780
RDB100080
Description
Disco 1, Range Rover & Defender 4 hole bump stop
Disco 2 panhard rod (was 1XD)
Disco 2 front shock lower
Disco 2 rear shock top and rear shock upper and lower
Disco 1, Range Rover & Defender Hardcore rear radius arm
to chassis
Disco 2 front anti roll bar active suspension
Disco 1, Range Rover & Defender Hardcore extended 2 hole
bump stop
Disco 1, Range Rover & Defender Hardcore extended 4 hole
bump stop
Disco 2, Range Rover P38, Defender from 2002 Hardcore
panhard rod
Disco 1, Range Rover & Defender Hardcore panhard rod
Disco 2 front or rear Hardcore radius arm to chassis
Range Rover P38 front radius arm to axle
Range Rover P38 front radius arm to chassis
Range Rover P38 rear radius arm to chassis
Range Rover P38 front anti roll bar clamp
Freelander front anti roll bar clamp
Freelander rear radius arm to chassis
Freelander rear radius arm to hub
Freelander rear track arm
Freelander rear front track arm inner
Freelander front wishbone front
Freelander front wishbone rear
Freelander front wishbone rear snub washer
Defender complete bush kit pre 1994
Disco 1, Range Rover from 1986 & Defender from 1994 complete
bush kit
Range Rover pre 1986 bush kit
Disco 1, Range Rover from 1991 & Defender rear shock bush kit (was 1J)
Disco 1, Range Rover & Defender front shock bush kit (was 1K)
Range Rover pre 1991 rear shock bush kit
Disco 1 from 1994 & Range Rover with air suspension rear
shock bush kit
Range Rover with air suspension front shock bush kit
Disco 1 & Range Rover steering damper bush kit
Defender steering damper bush kit
Disco 1, Range Rover & Defender front anti roll bar bush kit
Disco 1 & Range Rover rear anti roll bar bush kit
Disco 2 complete bush kit
Range Rover P38 complete bush kit
Defender rear anti roll bar bush kit
Defender from 2002 complete bush kit
Freelander Mark 1 bush kit
Disco 1, Range Rover from 1986 & Defender pre 2001 Hardcore
complete bush kit
105 PERFORMANCE
Polybush Qty Allmakes Part No
Part No in Kit PERFORMANCE
4.3 tonne single line pull
Automatic load holding brake
3-stage planetary gearbox
Sealed contactor switching
Free spool clutch for fast
wire payout
Hook handling strap
Durable handheld remote control
Circuit breaker protected
Fully pre-wired ready to connect
Heavy-duty roller fairlead
100ft High tensile wire rope
Heavy-duty 5.0hp series wound
motor
Superwinch Electric Winches
Superwinch winches are trusted by professionals and weekenders alike, Superwinch having
produced over two and a half million winches in the last 35 years. Their winches are available in
capacities up to 16500lbs and we have selected a range suitable for all 4x4 vehicle
self-recovery applications.
Superwinch LP8500 - 1585200
Superwinch EPi9.5 - 658007
wire payout
Hook handling strap
wire payout
Hook handling strap
motor
Heavy-duty hawse fairlead
Superwinch EP12.5 & EP16.5 - 658001 & 658003
motor
Superwinch EP9 - 09032CE
5.7-7.5 tonne single line pull
wire payout
Hook handling strap
90-125ft High tensile wire rope
wire payout
Hook handling strap
Super-duty roller fairlead
motor
motor
Superwinch Husky 8 - 8514
Superwinch EPi9 - 09034CE
Worm drive gearbox
wire payout
Hook handling strap
wire payout
Hook handling strap
Super-duty roller fairlead
motor
motor
NEW Superwinch 1120149 - Portable LT2000 Winch on powder coated winch platform now available.
107 SUPERWINCH WINCHES
106 SUPERWINCH WINCHES
Superwinch EP9.5 - 658005
Warn XD9000 - 88500
Warn is probably one of the world’s most recognised brands in off road products. Warn have been
producing winches for over 45 years and are synonymous with off roading. Their winches are
produced with quality and performance in mind and several have unique features such as a built-in
high performance compressor.
A long-time best seller, the XD9000s compact size and separate control pack
let it work effectively in very tight spaces. It uses the 4.6hp Series Wound
motor producing 9000lbs of pulling power through 100ft of wire, torque and
line speed are outstanding.
Warn 9.5XP - 86500
Warn XDC - 74700
The fast powerful Warn 9.5xp is designed for the serious off-roader who
demands a winch that will perform under the most extreme conditions in the
world. A powerful 4.6hp motor generates 9,500lbs of pulling power with the
longest duty cycle and fastest line speed of any WARN winch when under
load. 7.6ft per minute under 9500lbs load.
A low profile and compact shape to fit a wide variety of bumpers and
mountings in particular discrete mounts on modern 4x4s. It has a 9,500lb
line rating with 100ft of wire and an extreme duty cycle for long, efficient
pulls. Other features include a 4.6hp Gen II motor, thermometric protection
and a hand held remote control with a built-in torch.
Warn 8274-50 - 88631
Air Accessory Kit - 73945
Still has the fastest no-load line speed (73.4 feet per minute) and the longest
rope (150ft) in the WARN range. The M8274-50 is the preferred winch for
off-road challenge events. Its unique gearbox and upright design has proven
to be strong & reliable, and its braking system delivers smooth operation with
excellent heat dissipation. With a pulling capacity of 8500lbs the 8274 is the
off road competitor’s choice.
Air accessory kit includes HD inflator, set of four tyre deflators, 25mtr extra
hose, couplings and bag for storage.
Warn XD9000i - 27550
Winch Remote Control - 76080
There are more XD9000i winches fitted on off-road vehicles than any other
winch. 9000lbs capacity, 125ft of wire, a no load line speed of 34ft per
minute and 3-stage planetary gearing, and the ability to run cool with low
amp draw for long winching cycles are just a few reasons why.
Suitable for all Warn Winches.
109 WARN WINCHES
108 WARN WINCHES
Warn Electric Winches
Recovery Winch Extention 4500kgs - ARB720
The ARB Winch Extension Straps are designed for extending the length of your
winch cable when the most suitable anchor point is out of reach. They are
reinforced with cordura on the end loops to prevent chafing. Two moveable
sleeves on the main section prevent chafing. The Strap is constructed of nonstretch polyester, in purple to differentiate this strap from other straps.
ARB720 - 2’’ x 66’ - 4500Kg (9,900 pounds) maximum load.
ARB725 - 2’’ x 66’ - 8000Kg (17,500 pounds) maximum load.
Recovery cable damper - ARB220
The ARB Winch Cable Damper, when fitted to a rigged winch line, greatly
diminishes winch line fling in the event of a winch line or anchor failure.
The ARB Winch Cable Damper is manufactured from heavy-duty vinyl and
Velcro, and features internal storage pockets to facilitate carry of pulley
blocks, shackles, tree straps, and other recovery gear from your vehicle to
the anchor point.
Speedy seal puncture repair kit - 10000010
Snatch block 9000kgs ultra light - 10100020
The ARB Speedy Seal Puncture Repair Kit quickly and easily repairs tubeless tyres without
having to remove the tyre from the vehicle or the wheel.
Even the most powerful winches sometimes need a helping hand. Double the pulling capacity
of your winch with the ARB Snatch Block 9000. The unit scissors open to enable the insertion
of a winch line. The Snatch Block 9000 features a 20,000 lb. working load limit.
E-Z Tyre Deflator - ARB505
Snatch block 14500kgs - ARB209
The unique, patented design of the ARB E-Z Tire Deflator allows for removal
of the valve core for rapid deflation of very large tyres and accurate tyre
reading. The Bronze Bourdon Tube gauge design ensures accuracy is not
affected by changes in temperature, humidity, or altitude, and is protected by
a vinyl boot. The dial is large and legible, and provides accurate pressure
readings in 1 PSI increments from 4 to 60 PSI. Protective canvas pouch and
instruction sheet are included.
A snatch block is one of the most useful items of recovery gear that you can
carry. The ARB snatch block incorporates an original feature of a greasable,
hardened steel pin and easy glide side plates.
Tree Protector 3m - ARB730 5m - ARB735
Adventure light 12v with canvas bag - ARB225
The ARB 12,000 KG Tree Trunk Protector is constructed of green polyester so
that the user may differentiate it at a glance from the orange-colored ARB
Snatch Straps and the purple-colored ARB Winch Extension Strap. The ARB
Tree Trunk Protector is 3” wide and 10’ long, and reinforced with cordura on
the end loops to prevent chafing. Two moveable sleeves on the main section
prevent chafing of the polyester material under various rigging configurations.
Withstands 25,000 pounds of load. Vehicle recovery booklet included.
The 4x4 Adventure light is a tough, compact and lightweight 12v fluorescent
light, suited to numerous outdoor activities. The light intensity is simply
stunning, yet the Adventure light draws a current of just one Amp from your
standard 12 volt power socket in your vehicle, or a portable battery pack.
It comes with a 5 metre power lead incorporating a power switch and
hanging points.
Recovery strap 8000kgs - ARB705
These ARB Heavy Duty Snatch Straps are constructed of nylon with a 20%
elasticity and are reinforced with cordura on the end loops to prevent chafing
from prolonged heavy use. Two moveable sleeves on the main section prevent
chafing of the nylon material under various rigging configurations.
ARB705 - 2” x 30’ - 8,000 KG (17,500 pounds) maximum load.
ARB710 - 3” x 30’ - 11,000 KG (24,000 pounds) maximum load.
111 ARB
110 ARB
An assortment of high
quality recovery equipment,
appropriately selected to
suit your 4x4 and
environment, is essential when venturing off the beaten
track. Vehicle recovery is a major part of offroading.
Without the right equipment, it can become frustrating
and even dangerous, but if you’re properly prepared, it
becomes a challenging yet rewarding experience. Don’t
trust your vehicle to substandard recovery products
that could jeopardise your and your vehicle’s safety.
ARB’s vehicle recovery accessories are engineered and
manufactured to the highest standards, making them
ideal for recreational use as well as competition.
4xRAC Mounting Kit - GHL2
The versatile Hi-lift Jack and related
accessories are designed for
situations requiring lifting, pushing,
pulling, winching and clamping in the
toughest environments.
LR200 Mounting Kit - GHL3
XT485 4ft Extreme Jack - GHL4XT
ORB Jack Base - GHL4/5BASE
LM100 Wheel Lift Mate - GHL8
HL485 4ft Hilift Jack - GHL4
HL605 5ft Hilift Jack - GHL5
JP350 Jack Protector - GHL4/5BAG
JA5002 Jack Adaptor - GHL4/5A
FK1 Service Kit - GHL4/5REP
113 HI-LIFT JACKS
112 HI-LIFT JACKS
HKR Handle Keeper Red - GHL6
HKR Handle Keeper Red - GHL6
Def 110 - Anodised kit - CNKIT01-110/A
Def 110 - Black kit - CNKIT01-110/B
Def 110 - Uncoated kit - CNKIT01-110/U
Def 90 - Anodised kit - CNKIT01-90/A
Def 90 - Black kit - CNKIT01-90/B
Def 90 - Uncoated kit - CNKIT01-90/U
Quadrant Chequer Plate inc. S/S fittings
Def 110 CSW - Anodised pair - RQKIT01-110/A
Def 110 CSW - Black pair - RQKIT01-110/B
Def 110 CSW - Uncoated pair - RQKIT01-110/U
Mammouth chequer plate - simply the best 3mm alloy chequer plate treadplate in the aftermarket!
Mammouth take pride in their manufacturing process, and every piece is hand-checked prior to
packing. It is the only product in the market which has been chamfered and de-burred to give a
quality finish like no other.
The range of chequer plate from Mammouth is unrivalled with options and variations to suit all
Defender models and styles since production began. Choose between uncoated, silver anodised
and black powder coated to match or contrast the body colour of your Defender.
Every kit is supplied with a set of stainless steel countersunk nuts and bolts for the perfect
fitted finish.
The same foam backing membrane supplied by Land Rover is also available to apply to the wing
tops and as optional extra for that ‘factory’ finish.
Bonnet Centre Chequer Plate inc.S/S fittings
Def 90/110 - Anodised kit - BCKIT01-DEF/A
Def 90/110 - Black kit - BCKIT01-DEF/B
Def 90/110 - Uncoated kit - BCKIT01-DEF/U
Bumper Treadplates inc. S/S fittings
Anodised kit - Short - BTS-KIT/A
Black kit - Short - BTS-KIT/B
Uncoated kit - Short - BTS-KIT/U
Anodised kit - Long - BTL-KIT/A
Black kit - Long - BTL-KIT/B
Uncoated kit - Long - BTL-KIT/U
Rear Cross Member Chequer Plate - boxed
Def 90/110 - Anodised (single) - RCMKIT01-DEF/A
Def 90/110 - Black (single) - RCMKIT01-DEF/B
Def 90/110 - Uncoated (single) - RCMKIT01-DEF/U
Side Sills inc. S/S fittings
Def 110 County Station Wagon - Anodised kit - SLKIT01-CSW/A
Def 110 County Station Wagon - Black kit - SLKIT01-CSW/B
Def 110 County Station Wagon - Uncoated kit - SLKIT01-CSW/U
Def 110 Hard top - Anodised kit - SLKIT01-VAN/A
Def 110 Hard top - Black kit - SLKIT01-VAN/B
Def 110 Hard top - Uncoated kit - SLKIT01-VAN/U
Def 90 - Anodised kit - SLKIT01-90/A
Def 90 - Black kit - SLKIT01-90/B
Def 90 - Uncoated kit - SLKIT01-90/U
Wing Tops inc. S/S fittings
Def 90/110 no hole - Anodised kit - WTKIT01-NH/A
Def 90/110 LHS aerial hole - Anodised kit - WTKIT01-LAH/A
Def 90/110 RHS aerial hole - Anodised kit - WTKIT01-RAH/A
Def 90/110 no hole - Black kit - WTKIT01-NH/B
Def 90/110 LHS aerial hole - Black kit WTKIT01-LAH/B
Def 90/110 RHS aerial hole - Black kit - WTKIT01-RAH/B
Def 90/110 no hole - Uncoated kit - WTKIT01-NH/U
Def 90/110 LHS aerial hole - Uncoated kit - WTKIT01-LAH/U
Def 90/110 RHS aerial hole - Uncoated kit - WTKIT01-RAH/U
Def 90/110 Pair of Wing Top Foam Gaskets - WT-GAS (07 on WT-GAS07)
Fuel Filler Surround
TDi Def 90/110 - Anodised (single) - FF-TDI/A
TDi Def 90/110 - Black (single) - FF-TDI/B
TDi Def 90/110 - Uncoated (single) - FF-TDI/U
TD5 Def 90/110 - Anodised (single) - FF-TD5/A
TD5 Def 90/110 - Black (single) - FF-TD5/B
TD5 Def 90/110 - Uncoated (single) - FF-TD5/U
115 MAMMOUTH CHEQUERPLATE
114 MAMMOUTH CHEQUERPLATE
Rear Corners inc. S/S fittings
Front Runner Accessories
Spotlight Mount Kit - FRUN54
Black powder coated steel spot light mounting brackets. Supplied as a pair
Suitable for all Front Runner roof racks.
Expedition Roof Rack - FRDISCOEX
Roof Rack Access Ladder - FRLR23
Black powder coated aluminium expedition roof rack. 2.2m long x 1.4m wide.
The Expedition rack has a 1.4m open end and can be fitted with the open
end to the front or rear. All racks will accept Front Runner accessories without
drilling by means of the unique slotted extrusions used in the rack
construction. (Ladder not included).
Suitable for Discovery 1 and 2.
Aluminium 2 piece ladder, attaches to the rear body for easy access to any
roof rack. Does not obstruct number plate.
Suitable for Defender.
Expedition Roof Rack - FRLREX90
Suitable for Defender 90.
Black powder coated steel ladder attaches to the rear door for easy access
to any roof rack. Supplied with fitting kit and instructions.
Suitable for Discovery 1 and 2.
Expedition Roof Rack - FRLREX110
construction. (Ladder not included) Suitable for Defender 110.
Black powder coated steel ladder attaches to the rear door for easy access to
any roof rack. Supplied with fitting kit and instructions.
Suitable for Discovery 3.
For Def110/130 double cab (1.6m long) - FRLREX130
Slimline Roof Rack - FRDISCO4002
The Slimline rack is a flat rack and will accept Front Runner accessories
without drilling by means of the unique slotted extrusions used in the rack
Suitable for Discovery 3.
Featherlight Awning
Front Runner featherlight Awning (3.3 x 2.7m) - FRAWN06
Featherlight pair of Sides - FRAWN07
Featherlight Front - FRAWN08
117 FRONT RUNNER
116 FRONT RUNNER
Front Runner have developed the most versatile and advanced range
of 4x4 accessories, utilising the very latest technology and materials.
Allmakes are pleased to offer the following range of Front Runner
specialised products for Land Rover vehicles.
Spade Mounting Kit - FRUNWC01
These zinc plated tie down rings can be located in the slots in the roof rack
base. Easily positioned.
Supplied as a pair.
Black powder coated steel spade mounting kit.
Suitable for all roof rack types.
Spare Wheel Mounting Kit - FRLR37
Hi-Lift Jack Mounting Kit - FRLR104
90/110/130 TD5 bonnet spare wheel mounting kit.
Defender rear bumper mounting kit for the Hi-lift jack.
Spare Wheel Clamp - FRUN29
Hi-Lift Jack Mounting Kit - FRUNWC05
Black powder coated and lockable spare wheel clamp. The base plate is
located in the slots in the roof rack base and requires no drilling.
Black powder coated mounting kit designed to securely mount a Hi-Lift jack to a
Front Runner roof rack.
Axe Mounting Bracket - FRUNWC03
Suitable for all Expedition Roof Racks.
Jerry Can Holder - FRUN2009
Black powder coated steel lockable double jerry can holder. Easily opened
and closed with a lockable over centre catch. The holder is located in the
slots in the roof rack base and requires no drilling.
Under Cubby Box Safe - FRLR101
Black powder coated steel lockable safe.
Mounts under centre console out of sight.
Suitable for Defender 90/110 SW and double cab.
119 FRONT RUNNER
118 FRONT RUNNER
Tie Down Ring - FRUN11
Water Tank - FR874
Auxillary Fuel Tanks
90/110 50ltr upright flat water tank with wheel arch cutouts.
(1350 x 80 x 600mm).
Additional fuel tanks to extend the range of your Land Rover.
Disco 2 40ltr wheel arch mounted fuel tank - FRDISCO43
Disco 3 80ltr fuel tank including transfer pump - FRDISCO45
90 Td4/Td5 45ltr right mounted including transfer pump - FRLR42
90 200/300 Tdi 40ltr left mounted including transfer pump - FRLR40
Water Tank - FR875
Roof rack 40ltr square water tank (480 x 350 x 310 mm).
All tanks listed below are for Defender 110. They have a 45ltr capacity and
are fitted between the filler neck and existing fuel tank. Tanks are supplied
with fitting kits and instructions. (Not suitable for HCPU).
200/300 Tdi 1983-1998 - FRLR41
Td5 1998-2007 - FRLR44
Td4 2007 - FRLR49
Auxillary Fuel Tank with Guard - FRDISCO36
Extra Fuel tank with protection for Disco III.
110 >2007 44ltr wheel arch mounted water tank - FRLR46
110 Td4 2007> 36ltr wheel arch mounted water tank - FRLR43
Water Tank - FR870
90/110 60ltr Water tank (830 x 300 x 265mm) which fits between
wheel arches.
121 FRONT RUNNER
120 FRONT RUNNER
Water Tank
RTC8828AA
Witter Towbars has consistently set the standard for quality,
reliability, and value for money. Every Witter towbar is
covered by the Shield of Safely, a symbol of quality, backed
by a genuine lifetime guarantee.
KNK500070
YWJ101500
LR006309
LR007479
YWJ500150
Towbars, Couplings and Electrics
12S & 12N
Electrics S Type
Electrics N Type
Defender >98
RTC8828AA
incl tow ball
RTC8872
Cut and splice
Defender 90 99>
LR006309
incl tow ball
STC50303 <2006
LR005921 2007>
YWJ101500 <2006
LR005920 2007>
Defender 110 99>
LR006310
incl tow ball
STC50324 <2006
LR005921 2007>
YWJ101500 <2006
LR005920 2007>
Discovery >99
STC8816
incl tow ball
incl electrics
Discovery 2
NOT SWAN NECK
ANR6643
incl tow ball
incl electrics
Discovery 3
LR007484
incl tow ball
Freelander >2006
KNK500070
incl tow ball
incl electrics
Freelander 2 2007>
LR007479
incl tow ball
incl electrics
YMZ101030
LR006310
STC8816
VPLFT0001
STC8816
STC8543AA
RTC8872
Cut and splice
STC50179 >99 Caravan
STC50389 99> Caravan
STC50081
STC50181 - less front fog lamps
ANR6643
Range Rover Classic
YWJ500150
YWJ500160
VUB000740
VUH00040
YMZ101030
VPLFT0001
VPLFT0002
COUPLINGS
STC8816
incl tow ball
incl electrics
YWJ500120
RTC8872
Range Rover P38
NOT SWAN NECK
STC8543AA
incl tow ball
incl electrics
STC8875
Not listed separately
Range Rover L322
VUB000740
VUH000040
VUH000020
Range Rover Sport
LR007484
incl tow ball
YWJ500150
YWJ500160
A complete towing kit consists of a Towbar, a Coupling and an Electric Kit.
Standard
coupling Z11
(RTC8891AA)
Adjustable
Height Coupling
Z52A
3.5 Tonne Universal
Coupling Z32
(RTC8159)
3.5 Tonne Black
Universal Coupling
Z82
(RTC8159B)
5 Tonne Universal
Coupling (4 hole fixing)
ZX44
Pin and Jaw
ZX15
(KNB100640)
123
122 WITTER TOWING
Towbar
125 EXMOOR TRIM
124 EXMOOR TRIM
Allmakes is an Authorised distributor and stockist of the Exmoor Trim range of products.
All products shown here in our catalogue, are available from stock. Any Exmoor Trim
products that do not appear in this catalogue can also be supplied by Allmakes.
Defender Elite
Deluxe Seats
The Defender Elite is the ultimate for unsurpassed comfort, support, style and
hold. A higher back for the taller driver, reclining back rest and adjustable twin
stalk head rest and removable seat base. Available in wide range of trim.
Includes runners. Sold in pairs.
More comfort and hold than standard Front Outer Bases and Backs.
EX11645 Complete Three Seat Set Black Vinyl
Modular
Standard Front Outer Bases & Backs
Designed for superior on or off road comfort. Stylish integral rugged
design. A taller back with reclining back rest. Available in a wide range of
trims. Includes runners. Sold in pairs.
Replacement square style standard front bases and backs will fit all series
II/III and early 90/110”.
See www.exmoortrim.co.uk for full details of this range.
349967 Base in black vinyl.
Also available in grey vinyl. Backs available as bolt type or pin type.
Defender Front Seats
Front Centre SeatTechno
Built for comfort and durability. Protective coravin on the high density cold
cure foam. Covers with sewn, not heat welded detail, to ensure long life.
Includes runners.
New or replacement Front seats available with or without head rests.
EX9742 Front Centre Seat in Techno. Available in wide range of trim.
Defender Front Bases & Backs
Seat Heaters & Lumbar
Easy to fit direct replacements for standard seat bases and backs.
EX9973 Base in Black Vinyl.
EX9979 Base in Techno
EX9974 Base in grey vinyl
Available in a wide range of trims.
Available as a pair to install yourself or buy at the same time as your new
seats to receive them pre-installed.
EX9969 - 2 seat Heater Kit
EX9971 - Lumbar Support for 1 seat
Retrim Kits & Foam
2nd Row High & Low Backs
Everything you need to retrim your front seats and standard second row
seats. Available as complete kits or individual components.
EX3422 Base Foam
EX776A Back Foam
EX7021 Black Vinyl Retrim Kit
EX11870 Outlast Black Canvas
Add comfort and style to your second row. Will not fit to 60/40 split
bench frame.
EX7486 High Back Seat in Techno
EX7503 Low Back in Techno
Available in a wide range of trim.
Series Extreme Seat
2nd Row Reclining Kit
For enhanced comfort and support in your Series II/III.
EX4949 Black Vinyl. Available in wide range of trims.
Reclining kit to fit the Exmoor Trim 2nd Row High and Low backs.
EXT010-3 - 2nd Row Recinling Kit.
127 EXMOOR TRIM
126 EXMOOR TRIM
Inward Facing Tip Ups
Seat Covers
Load area inward tip ups. Up to four can be fitted (Two per side).
EX4126 Black Vinyl Tip Ups
EX4132 Techno Tip Ups
The ultimate seat covers. Premium canvas covers with tight fit with YKK zips and studs with
side pockets and rear map pockets. Bacteria, fungus and water resistant. Available for
front, second row and load area. Sand or Shot Grey. Free canvas storage bag.
Defender, Discovery, Range Rover and Freelander sets available.
EX7558 Front Outer Pair in Sand Canvas <2007
EX7559 Front Outer Pair in Shot Grey<2007
Inward Fold Ups
Waterproof Seat Covers
Enhanced load area comfort and saftey. Impact tested with internal steel
frame. Available in a wide range of trims.
Tight fitting Water Proof Seat Covers in black nylon double sided non slip. Available for
standard Defender seat, Exmoor Trim Seats and Discovery.
100% waterproof and machine washable at 40 degrees.
Seat Riser
Acoustic Moulded Matting System
Pair of adjustable seat risers for a single seat. Increase your legroom.
24 adjustable positions.
EXT010-5
A three piece kit for front row that dramatically reduces noise. Easy to fit,
transferable and easy to clean. (Can be hosed out). A hard wearing
durable surface.
EX5178 – 90/110 LT77
EX6136 – 300/TD5 R380
EX5177 – Series II/III
Forward Facing Fold Ups
Load Area Acoustic Mats
Superior comfort in your load area. Folds over the wheel arch when not
in use.
EX8134 L/H Black Vinyl
EX8116 R/H Black Vinyl
EX8140 L/H Techno
3 piece matting system. Covers wheel arches and floor. Supplied with fitting
guide, cutting template depending on vehicle model & double sided adhesive
tape for easy installation on the wheel arches. Fits 88/90 &109/110 County.
EXT009-14 – 3 Piece Load Area Mat System
EX4676 – 88” Load area mat
EX1327 – Defender 5 Door County Station Wagon Load area mat
Bench Seats
Acoustic Floor Mats
2 and 3 man bench seats for your load area. Steel pressed backs for
strength. 3.5” foam for comfort.
EXT002-BV 2 Man Bench Seat Black Vinyl. Other trims available.
Acoustic Floor Matting from Exmoor Trim dramatically reduces cab noise.
Designed for the front, 2nd row and load area. Easy to fit and easy to clean.
Fire Retardant. Insulating and water repellent.
EX1325 – 90/110 Front R380 Acoustic Mats (not V8)
EX1324 – Front LT77 Acoustic Mats
Carpet Sets
See www.exmoortrim.co.uk for full details of the whole range.
Quality front carpet sets with a high grade close pile automotive carpet
which is water repellent and rot proof. Heavy duty heel mat and bound
edging for durability.
EX7826 – LT77 Front Carpet Set Black
EX7827 – R380 Front Carpet Set Black
EX7825 – Series II/III Carpet Set Black
129 EXMOOR TRIM
128 EXMOOR TRIM
LT77 & R380 Leather Cloth Gaiter
Galvinised Hood Stick sets including everything you need to fit including
nuts blots and washers.
88” Full Hood EX839
Hood stick sets, bikini and high capacity hood stick sets also available.
Black quality leather cloth gaiter.
EX7103
Canvas Hoods
Loc Box
Close weave cotton dyed canvas creates the authentic Land Rover hood.
High quality with expanding thread, gate stitching and brass
features/buckles.
EX5199 - Black Full 90” Hood
EX6519 - 90/110 Bikini Hood Black
Canvas Hoods available for any model and style from Series I to latest
Defender. Sand, Khaki, Black and Olive Drab available.
For improved cubby security choose the Loc Box. A 26.5 litre capacity
cubby box with a 2.1 cm thick security bolt. Twin fold away cup holders and
rear map pocket. Tuff textured graphite exterior.
Mohair Hoods
Cubby Box
The ultimate hood. A three layer laminate tilt/hood with internal and
external facsia with water proof membrane. Choice of colour. Available for
wide range of models.
Well made sturdy wooden box trimmed in vinyl The lid is padded and trimmed
to match your interior. Brass hinges with locking stay.
131 EXMOOR TRIM
130 EXMOOR TRIM
Hood Stick Sets
RR SPORT
RR L322
Front Spoiler
Front Spoiler
Few break free from the
pressures of conformity to the accepted rules.
To do so convention must be challenged and existence
redefined. Once boundaries are rejected it is possible to
believe that the world can be changed. Kahn Design was
created to challenge convention and redefine ideals.
RRS002A (Not HST)
Wide Wheel Arch
(Kit not HST) - RRS002B
(Kit HST only) - RRS002C
‘Kahn’ had a passion for cars and used his eighteen years experience
in the automotive industry to create the Kahn Brand. Every product is
designed to make a statement in itself, while perfectly integrating with
the vehicles existing aesthetics.
Side Sills
DISCOVERY 3
(Pair) RRV002B
Rear Spoiler
RRS002D
Wheel Arches
Side Vent
Chrome - one side only LRD006B
FREELANDER 2
Set of 4 - RRV002D
Rear Apron
RRV002C
Fog Lamp Bezels
Rear Spoiler Lip
Chrome - LRF006A
RRS002E
Bullet Vent
Chrome - one side only LRD006C
Door Handle
Chrome (Set) - RRV002
Rear Apron
Side Vents
(Not for HST) - RRS002F
Chrome - LRF006B
Side Bars
Fog Lamp Bezels
Chrome or body colour LRD006D
Stainless Steel - RRV006B
Mesh Front Grill
RRS002G
Side Bars
Bullet Vents
Stainless Steel
LRF006C
Chrome or body colour
RRV006C
Side Bars
Stainless Steel
LRD006E
Side Vents
RRS002H
133 KAHN ACCESSORIES
132 KAHN ACCESSORIES
RRV002A
UNIVERSAL
ACCESSORIES
135
134
SPECIALIST
ACCESSORIES
Driving Lights - GDL001
Pair of H7 12972vc high performance bulbs giving 30% more light.
Pair of 8”driving lights designed for the larger 4 x 4. Multi-position bracket
for maximum flexibility for above bumper mounting. Complete with 2 x 12volt
55watt powerful halogen bulbs (fitted). Wiring kit GDL010 is required.
ALL
ALL
Light Bulbs - GBK002
Pair of H4 12342vp high performance bulbs giving 50% more light.
Pair of rectangular driving lamps for all Land Rover models.
OEM
ALL
Pair of 'Silvervision' indicator bulbs, silver in colour but flash orange, ideal for
use in vehicles with clear or white indicator lenses.
Pair of 8”driving lights with a black body, chrome rim and black plastic light
guards. The lights come complete with 2 x 12volt 55watt halogen bulbs.
Wiring kit GDL010 is required.
ALL
ALL
Pair of H4 Xenon Max Bulbs giving up to 90% more light.
Pair of 5.5”driving lights with a black body. The lights come complete with 2
x 12volt 55watt halogen bulbs. Wiring kit is included.
ALL
ALL
guards. These lights also include a stylish LED 'halo' ring. The lights come
complete with 2 x 12volt 55watt halogen bulbs.
ALL
ALL
guards. These lights also include a stylish LED 'halo' ring. The lights come
complete with 2 x 12volt 55watt halogen bulbs.
ALL
ALL
GEN
ALL
137 UNIVERSAL ACCESSORIES
Work Light - GWL002
Land Rover Safari 5000 driving light with removable plastic cover.
The light comes complete with a 12volt 55watt halogen bulb.
Wiring kit GDL010 is required. NB. This light is sold singularly.
Single rectangular adjustable work light. Plastic body with polycarbonate lens.
ALL
OEM
Light Fitting Kit - GDL010
Work Light Bulb - GWL003
Driving light universal wiring kit, includes 30amp relay, in line fuse, switch,
cable and connectors.
H3 12v 55w work light bulb, suitable for GWL001 and GWL002.
ALL
ALL
Driving Lamp Kit - GDL011
LED Worklight - GWL004
Lamp kit (pair) with HID (Gas discharge units).
Multi voltage LED work lamp.
OEM
ALL
Emergency Bulb Kit - GBK001
LED Inspection Light -GIL001
EU approved emergency bulb kit including popular 12volt bulbs as well as
an H4 headlight bulb and spare fuses.
Cordless LED inspection light, chargeable from the mains or cigar socket,
useful in the workshop or at home.
ALL
OEM
Headlamp Conversion Kit
HD LED Inspection Light - GIL002
7” halogen headlamp conversion kits.
Vapourproof heavy duty LED inspection lamp - rechargeable and cordless
for convenient use. Tough robust design for demanding conditions.
RHD - GDL003 Ring GDL003G Wipac.
LHD - GDL007 Ring GDL006 Wipac.
ALL
ALL
Work Light - GWL001
LED Underbonnet Work Light - GIL003
Single round adjustable work light. Plastic body with polycarbonate lens
complete with on/off switch.
For professional and workshop use this underbonnet worklight is
rechargeable and cordless. Includes spring mounted telescopic arms for
easy fitment.
ALL
ALL
GEN
ALL
Driving Lights - STC8480
Trailer Lighting Socket - STC4286
3.0m jump leads suitable for vehicles up to 2.0 litres. Fully insulated
heavy-duty clamps. 100% multi-strand copper conductors and coated in
flexible PVC. Colour coded to identify correct polarity. Supplied in a
durable carry case.
7 pin 'N' type trailer lighting electrical socket.
ALL
ALL
Battery Booster Cables - GBC020
Trailer Lighting Plug - 579408
3.5m jump leads suitable for vehicles up to 3.5 litres. Fully insulated
heavy-duty clamps. 100% multi-strand copper conductors and coated
in flexible PVC. Colour coded to identify correct polarity. Supplied in a
durable carry case.
7 pin 'N' type trailer lighting electrical plug.
ALL
ALL
Battery Isolator Switch - GCU001
Battery isolator switch with removable key.
Mountney 14” 3 spoke black vinyl covered replacement steering wheel.
Requires vehicle specific steering wheel boss.
Steering wheel boss with 36 splines – GSW002
ALL
ALL
Electric Fan Kit - GFK001
Universal 9”electric fan kit for increased cooling. Simply reverse the fan
for push or pull blowing. Care must be taken to ensure adequate space
for operation.
GFK003 Electric fan thermostatic control switch is required.
Mountney 15” 3 spoke black vinyl covered replacement steering wheel.
Requires vehicle specific steering wheel boss.
ALL
ALL
Electric Fan Kit - GFK002
Universal 14”electric fan kit for increased cooling. Simply reverse the fan
for push or pull blowing. Care must be taken to ensure adequate space
for operation.
GFK003 Electric fan thermostatic control switch is required.
Mountney 15” 3 aluminium spoke, black vinyl covered replacement steering
wheel. Requires vehicle specific steering wheel boss.
ALL
ALL
Electric Fan Thermostatic Control - GFK003
Warning Triangle - GWT001
Thermostatic control switch for GFK001 and GFK002 electric fans. Supplied
'E' approved warning triangle, necessary in case of breakdown.
ALL
ALL
GEN
ALL
Battery Booster Cables - GBC010
Jerry Can Spout - GJC005
Also known as a 'Land Meter' this device shows angle of climb & descent
as well as lean angle.
Anti spill rigid Jerry Can spout suits 5, 10 and 20litre Jerry Cans.
ALL
ALL
Jerry Can Holder
Jerry Can - GJC05
Black powder coated steel Jerry Can holder.
20litre (GJC20) Jerry can holder - GJC003
10litre (GJC10) Jerry can holder - GJC004
5 litre green jerry can.
ALL
ALL
Jerry Can - GJC10
Rigid Jerry Can spout suits 5, 10 and 20litre Jerry Cans.
10 litre green jerry can.
ALL
ALL
Jerry Can - GJC20
Semi flexible Jerry Can spout suits 5, 10 and 20litre Jerry Cans.
20 litre green jerry can - GJC20
20 litre red jerry can - GJC20R
20 litre blue water can steel - GJC20W
ALL
ALL
Jerry Can Seal - GJC99
Fully flexible Jerry Can Spout suits 5, 10 and 20litre Jerry Cans.
Rubber seal for all jerry cans.
ALL
ALL
For other expedition equipment and accessories please
see the Specialist Section in this brochure on page 87.
Rigid 29mm diameter unleaded size Jerry Can spout with a breather suits 5,
10 and 20litre Jerry Cans.
ALL
GEN
ALL
Inclineometer - GLM001
Carpet Mats - GMS015
Mantec Heavy Duty 4mm aluminium bridging ladders (150cm long x 39cm
wide x 10cm thick).
Duraguard mats - universal, rubber backed, non slip, carpet faced mats. These mats may
require some trimming to suit the footwells. Supplied as a set of 4.
ALL
ALL
Sand Tracks - GMN041
Waterproof Seat Cover - GSC001
Mantec Sand Tracks are 1.5m long, made from 4mm aluminium and are tried
and tested in the Sahara Desert.
Sand Track Mounting Brackets (4-STMB).
Single black waterproof elasticated easy fit seatcover.
ALL
ALL
Optima Red Top starter battery - RTS4.2
The Optima Red Top starter battery is ideal for all heavy duty starting and
winching applications, remarkable power when compared to much larger
conventional batteries.
815 cold cranking amps, 12volts, 100min reserve capacity, capacity 50ah.
Trailer Board - GTB002
4'6" trailer board with 6m cable & "E" approved rear fog lamp and reflectors.
ALL
ALL
Optima Yellow Top deep cycle battery - YTS4.2
The Optima Yellow Top deep cycle battery is ideal for extreme conditions
where prolonged discharge is expected such as competitive winching,
powering hi-fi and when used as an auxiliary battery in dual battery systems.
765 cold cranking amps, 12volts, 120min reserve capacity, capacity 55ah.
ALL
Roof Bars
Mont Blanc, fully galvanised roof bars/roof bar systems:Freelander - long roof bars for vehicles with roof rails - 404U
Discovery 1 - long roof bars for vehicles with roof rails - 404UL
Front Heavy Duty Rubber Mats - GMS030
Universal Extra HD rubber mat, sold singularly and may require some
trimming to suit the footwell.
Discovery 3 - three part roof bar system
(apart from vehicles with roof rails) - BU2/FK120/126
Range Rover P38 - long roof bars for vehicles with gutter - 405UL/K00
Range Rover L322 - three part roof bar system
Range Rover Sport - three part roof bar system
ALL
ALL
Rear Heavy Duty Rubber Mats - GMS040
Bike Carrier - CM08
Universal rear rubber mat, supplied singularly and may require some trimming
to suit the footwells.
Mont Blanc, spare wheel tyre mounted, bike rack.
Spare wheel cover must be removed as the rubber of the tyre provides extra
grip to the mounting function.
Fits any vehicle with rear door mounted spare wheel.
ALL
ALL
GEN
ALL
Bridging Ladders - GMN040
Tow Ball - RTC8891AA
Black powder coated steel rear tow bar mounted step. Suitable for all
towing kits.
High quality standard 50mm towing ball.
ALL
ALL
Tow Bar Step - GTS002
Vehicle Safety Pack - AEK1
Zinc plated steel rear tow bar mounted step. Suitable for all towing kits.
A comprehensive vehicle safety pack. This kit offers excellent value for
money as it contains a first Aid kit, a 1kg fire extinguisher, a pair of gloves
and a hi-vis jacket, all contained in a travel bag.
ALL
ALL
First Aid Kit - PTK1
Black powder coated steel rear tow bar mounted step with an alloy tread top.
One person travel kit containing a comprehensive range of essential first
aid products.
ALL
ALL
Tow Bar Half Step - GTS004
Fire Blanket - SVB1
Black powder coated steel half rear tow bar mounted step.
One use fire blanket.
ALL
ALL
Fire Extinguisher - PS1X/FM
Zinc plated steel half rear tow bar mounted step.
A 1kg powder fire extinguisher. The container is made of aluminium which
makes it light weight. It also includes a quick release bracket and gauge.
ALL
ALL
Security Box - GAL001
Black powder coated steel half rear tow bar mounted step with an
alloy tread top. Suitable for all towing kits.
Lockable pedal security box. Fits all Land Rover models.
ALL
ALL
GEN
ALL
Land Rover Publications
Allmakes offers a range of technical publications on CD Rom. Each CD Rom focuses on one model
or family of models and contains:
• Original parts catalogue
• Workshop manuals
• Driver’s handbook
LHP1
Range Rover Classic, up to 1985
LHP2
Range Rover Classic, 1986 on
LHP3
Discovery 1, 1989 to 1994
LHP19
Land Rover Series I, 1948 to 1958
LHP20
Land Rover Series II, 1958 to 1961
LHP21
Land Rover Series IIA & IIB, 1958 to 1961
LHP22
Land Rover Series III, 1971 to 1985
LHP23
Land Rover 88 Half Ton Military, 1968 to 1984
LHP24
Land Rover 101 One Ton Military, 1975 to 1978
LHP25
Land Rover 90, 110 & XD Military, 1984 to 1999
LHP26
Land Rover 90, 110 & 127, 1983 to 1989
LHP27
Land Rover Defender 90, 110 & 130, 1990 to 1999
LHP28
Land Rover Defender 90 & 110 North America
LHP29
Range Rover Classic North America, 1987 to 1995
LHP32
Land Rover Discovery Series I, 1994 to 1998
LHP33
Land Rover Discovery Series I North America, 1994 to 1998
FKFRE-1.8P-1
A complete range of high quality Filter Kits are available to suit your Land Rover 4x4 whether you’re
driving on-road or venturing off-road.
FREELANDER - 1.8 PETROL
UP TO YA999999
Includes UFI Oil Filter
Part numbers for the filter kits work in this format: e.g FKRRC-3.5P-1 where FK is the prefix for all
Filter Kits, RRC is the three letter vehicle identifier (Range Rover Classic in this example), -3.5P is the
three letter engine reference (3.5 Petrol in this example), and -1 indicates that VIN-dependent
alternatives exist for this particular vehicle/engine combination.
FKFRE-1.8P-2
FREELANDER - 1.8 PETROL
FROM 1A000001
More information is included in the description to help identify the correct kit. Manufacturers Part
Numbers used for reference only.
FKFRE-2.0D
FREELANDER - 2.0 DIESEL
TCIE
Includes COOPERS Oil Filter
FKFRE-TD4-1
FREELANDER - TD4
UP TO 2A209830
150 FILTER KITS
Includes MANN Oil Filter
FKFRE-TD4-2
FREELANDER - TD4
FROM 2A209831
FKFRE-2.5V6
FREELANDER - 2.5 V6
FKFR2-2.2D-1
FREELANDER 2 - 2.2 DIESEL
Includes MAHLE Oil Filter
FKFR2-3.2P-1
FREELANDER 2 - 3.2 V6
Includes LAND ROVER Oil Filter
LPW100180U
ESR4103A
WFL100160
JKR100200
ALU1403L
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
LPW100180L
ESR4103A
WFL000010
JKR100280
ALU1403L
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
ERR5542C
ESR4103A
WJN10046
JKR100200
ALU1403L
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
LRF100150LG
LR007478A
MUN000010
JKR100280
ALU1403L
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
LRF100150LG
LR007478A
WJN000080M
JKR100280
ALU1403L
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
LPW100230U
ESR4238
WFL000010
JKR100280
ALU1403L
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
LR001247G
LR001313
LR005816
LR000899
LR006295
OIL FILTER
FUEL FILTER
AIR FILTER
POLLEN FILTER
SUMP WASHER
LR001419
LR005816
LR000899
LR006295
OIL FILTER
AIR FILTER
POLLEN FILTER
SUMP WASHER
151 FILTER KITS
Allmakes Filter Kits
FKDIS-200-2
DISCOVERY 1 - 200 TDI
UP TO JA018272
ERR3340U
NTC1435
AEU2147L
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
FKDEF-2.5P
FROM JA018273
ERR3340U
ESR1049
AEU2147L
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
ERR3340U
ESR1445A
AEU2147L
ALU1403L
UAM2857L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
WASHER
FKDEF-2.5TD
ERR3340U
RTC4683
ESR4065MH
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
FKDEF-200
ERR3340U
ESR1445A
ESR4065MH
ETC7398
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
ERR3340U
ESR4238A
PHB102320
ALU1403L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
LPX100590C
ESR4238A
ESR4686C
ERR6299
CDU1001L
OIL FILTER
AIR FILTER
FUEL FILTER
ROTOR FILTER
WASHER
FKDEF-TD5
LR007160C
PHE000112
JKR500010
1013938
OIL FILTER
AIR FILTER
POLLEN FILTER
WASHER/PLUG
FKDEF-2007
1311289
PHE000112
LR010075D
JKR500010
1013938
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER/PLUG
4454116
PHE000112
JKR500010
1013938
OIL FILTER
AIR FILTER
POLLEN FILTER
WASHER/PLUG
DEFENDER 2.5 PETROL
ERR3340U
NRC9238
JS660LG
FRC4808
243959
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
WASHER
ERR3340U
RTC3479
JS660LG
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
DEFENDER - 2.5 TURBO
DIESEL
ERR3340U
NRC9238
RTC6079U
FRC4808
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
DEFENDER - 200 TDI
ERR3340U
NTC6660
AEU2147L
ETC7398
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
WASHER
ERR3340U
ESR2623G
AEU2147L
ALU1403L
UAM2857L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
WASHER
LPX100590C
ESR4238A
ESR4686C
ERR6299
CDU1001L
OIL FILTER
AIR FILTER
FUEL FILTER
ROTOR FILTER
WASHER
LR004459
WJI500040
PHE500060
1013938
OIL FILTER
FUEL FILTER
AIR FILTER
PLUG & WASHER
FKDEF-V8
DEFENDER - V8 PETROL
FKDIS-300
FKDIS-3.5EFI
DISCOVERY 1 - 3.5 EFI
FKDIS-3.9EFI
DISCOVERY 1 - 3.9 EFI
152 FILTER KITS
FKDI2-4.0V8
DISCOVERY 2 - 4.0 V8
FKDI2-TD5
DISCOVERY 2 - TD5
FKDI3-4.4V8
DISCOVERY 3 - 4.4 AJ V8
FKDI3-2.7D
DISCOVERY 3 - 2.7 LION
DIESEL
FKDI3-4.0V6
DISCOVERY 3 - 4.0 V6
Includes LAND ROVER Oil Filter
FKDEF-300
DEFENDER - 300 TDI
DEFENDER - TD5
DEFENDER 2007 DIESEL
153 FILTER KITS
FKDIS-200-1
RANGE ROVER CLASSIC 2.4 & 2.5 VM
AEU2218L
NTC1435
AEU2147LA
OIL FILTER
AIR FILTER
FUEL FILTER
RANGE ROVER - 3.5
1970 - 1975
RTC3186
605191
JS660LG
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
FKRRC-3.5P-2
RANGE ROVER - 3.5
1975 - 1991 (CARB)
ERR3340U
605191
JS660LG
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
FKRRC-EFI-1
RANGE ROVER - 3.5 & 3.9
EFI 1986 - 1991 UP TO
VIN NUMBER GA464553
ERR3340U
RTC4683
NTC5958
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
RANGE ROVER - 3.9 EFI
1991 - 1994 FROM VIN
HA464554 TO LA647644
ERR3340U
RTC4683
ESR4065G
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
RANGE ROVER - 3.9 EFI
1994 FROM VIN
MA647645
ERR3340U
ESR1445A
ESR4065G
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
RANGE ROVER - 4.2
1992 - 1994
ERR3340U
ESR1445A
ESR4065MH
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
ERR3340U
ESR1049
AEU2147L
213961L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
FKRRC-3.5P-1
154 FILTER KITS
FKRRC-EFI-2
FKRRC-EFI-3
FKRRC-4.2P
FKRRC-200
RANGE ROVER - 200TDI
FKRRC-300
RANGE ROVER - 300TDI
ERR3340U
ESR1445A
AEU2147L
ALU1403L
UAM2857L
OIL FILTER
AIR FILTER
FUEL FILTER
WASHER
WASHER
FKP38-P-1
RANGE ROVER P38 4.0 & 4.6 UP TO TA346793
& FROM WA376580 TO
WA385948
ERR3340U
ESR341
ESR4065MH
BTR8037
ALU1403L
UAM2857L
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
WASHER
FKP38-P-2
RANGE ROVER P38 4.0 & 4.6 FROM VA346794 TO
VA376579 & FROM WA385949 ON
ERR3340U
ESR4238
ESR4065MH
BTR8037
ALU1403L
UAM2857L
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
WASHER
FKP38-2.5TD-1
RANGE ROVER P38 - 2.5 TD
FROM ENGINE NO 33978348
(DEC 1995)
TYPE A OIL FILTER
STC2180
ESR341
STC2827A
BTR8037
VYX000040
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
FKP38-2.5TD-2
(DEC 1995) TO VIN NO
TA346793 TYPE B OIL FILTER
STC3350M
ESR341
STC2827A
BTR8037
VYX000040
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
FKP38-2.5TD-3
(DEC 1995) FROM VIN NO
TA346794 TYPE B OIL FILTER
STC3350M
ESR4238
STC2827A
BTR8037
VYX000040
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
155 FILTER KITS
FKRRC-VMD
RANGE ROVER L322 3.0 DIESEL
FKRR3-4.4V8
RANGE ROVER L322 4.4 V8 M62
156 FILTER KITS
FKRR3-4.2S
RANGE ROVER L322 4.2 SUPERCHARGED
LPZ000020
PHE000040A
WFL000070
JMO000010
VYX000040
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
FKRRS-2.7D
LPW500030
PHE000050
WFL000021
JMO000010
VYX000040
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER
FKRRS-V8
LR007160C
PHE500021
JMO000010
1013938
OIL FILTER
AIR FILTER
POLLEN FILTER
WASHER/PLUG
RANGE ROVER SPORT 2.7 LION DIESEL
RANGE ROVER SPORT 4.2 V8 & 4.4 AJ V8
1311289
PHE000112
LR010075D
JKR500010
1013938
OIL FILTER
AIR FILTER
FUEL FILTER
POLLEN FILTER
WASHER/PLUG
LR007160C
PHE000112
JKR500020
1013938
OIL FILTER
AIR FILTER
POLLEN FILTER
WASHER/PLUG
157 FILTER KITS
FKRR3-3.0D
Our Products
Our extensive range of accessories offered in this catalogue has been developed
as a complement to our spare parts range for all Land Rover vehicles. The range
of spare parts we offer are categorised as follows.
158 ALLMAKES 4x4
We are currently the fastest growing
independent Land Rover wholesaler
in the world.
Our Customers
We supply Land Rover spare parts to independent wholesalers, fleet owners and
workshops in 54 countries on 6 continents, directly from our headquarters in
Oxfordshire where we house £7 Million of stock, providing 118,000 part options.
In addition we are approved Land Rover parts suppliers to the British Armed
Forces as well as other government organisations and NGOs worldwide.
Allmakes do not sell directly to private individuals. However details of our partners
can be found on our website www.lrparts.co.uk
GEN
Genuine Land Rover parts
Allmakes is an authorised parts distributor for Land Rover Ltd and, as such, has
access to all the facilities that any other dealer anywhere in Europe will have.
This means that Allmakes can provide its customers with a full range of genuine
Land Rover parts at competitive prices.
OEM
Original Equipment parts
In order to offer our partners a high quality alternative to genuine parts,
Allmakes has forged relationships with companies that supply Land Rover
factories throughout the world. We ensure that OEM parts are offered at attractive
prices. Where possible these are supplied in OEM image but if this is not
available, such parts are classified as Allmakes OE.
ALL
Premium quality replacement parts
For fast moving parts, or for those that fit older vehicles, Allmakes understands
the needs of its partners to have competitive offerings. To meet this demand
Allmakes secures about 66% of its replacement parts from European suppliers,
many of which supply to our unique specifications. Allmakes prides itself on
offering the highest quality of replacement parts in our industry.
159 ALLMAKES 4x4
For over 30 years the Allmakes Group
has been specialising in the supply of
high quality parts and accessories,
suitable for all Land Rover vehicles.
Quality
Allmakes is the only UK supplier to hold Lloyd’s ISO9001:2008 accreditation for
“Storage, supply and delivery of genuine, original and replacement spare parts
and accessories for vehicles manufactured by Land Rover”.
This has enabled us to continually improve our internal processes and also to
deliver market leading standards of customer service, along with the highest
quality range of parts.
Partnership
Allmakes has played an active role in the start-up, development and growth of
many of our customers. Some of these now have annual sales of £2 - £3 million.
In addition we continue to invest in the marketplace through software, the
internet, management and diagnostic
technologies and most recently an online
real-time ordering system that is available
to account customers.
160 ALLMAKES 4x4
Allmakes carries out extensive quality testing as part of the process for bringing
new products into the range. Our quality commitment is further demonstrated by
our 12 month guarantee on all products we supply.
Our clients have come to rely on our professional integrity and our ability to
deliver parts that fit first time and ensure the safety of any Land Rover vehicle.
Environmental Aims
Most of our parts are sourced from within Europe, thereby helping us to reduce
our carbon footprint, as part of our “green” commitment. In addition we actively
implement recycling and repackaging within our processes.
It is a core belief of the Company that in
order for us to succeed we must
understand and satisfy the real need of
our customers. This means that we
constantly listen to the opinions of our customers so as to match our customer
service, product offering and marketing material to their needs.
Allmakes believes that it is important that its partners receive personalised
support to maximise their profitability in their local marketplace and this is done
via an experienced sales team.
161 ALLMAKES 4x4
Peace of mind
163 ALLMAKES 4x4
162 ALLMAKES 4x4
Notes:
Notes:
Your local Allmakes stockist:

The Allmakes Accessory Guide 2010

Transkript

Podobné dokumenty

Sales Letter - JSV International Assistant Service

LAND ROVER