zde. - METAL 2014

15. - 17. 5. 2013, Brno, Czech Republic, EU
1
TANGER Ltd.
VSB - Technical University of Ostrava
The Czech Society for New Materials and Technologies
ASM International
Engeneering Academy of Czech Republic
Materials Research Society of Serbia
Norwegian Company of Material and Technology
French Society for Metallurgy and Materials
Italian Association of Metallurgy
Austrian Society for Metallurgy and Materials
Portuguese Society of Materials
22nd International Conference on Metallurgy and Materials
Conference Proceedings
May 15th - 17th 2013
Hotel Voroněž I, Brno, Czech Republic, EU
© 2013 TANGER Ltd., Ostrava
ISBN 978-80-87294-41-3
METAL 2013
Conference Proceedings
Different Authors
May 15th - 17th 2013
Hotel Voroněž I, Brno, Czech Republic, EU
Issued by:
TANGER Ltd., Keltičkova 62, 710 00 Ostrava, Czech Republic, EU
Edition:
1st Edition, 2013
Number of pages:
2068
CONTENT
METAL 2013
SYMPOSIUM A - ADVANCED IRON AND STEELMAKING ................................................................................. 29
Computer Modelling of Pneumatic Powder Injection into Liquid Alloys .........................................................30
Jan JEZIERSKI, Zbigniew BULIŃSKI, Krzysztof JANERKA
Steelmaking and Continuous Casting Process Metallurgy Factors Influencing Hot Ductility behavior
of Niobium bearing Steels ................................................................................................................................ 36
Steven G. JANSTO
The Development of Hollow Ingot Casting Technology at Vítkovice Heavy Machinery a.s. ............................43
Pavel MACHOVČÁK, Aleš OPLER, Zdeněk CARBOL, Martin KORBÁŠ, Marek KOVÁČ, Vladimír KRUTIŠ
On-line Fuzzy Regulator for Continuous Casting Process .................................................................................50
Tomáš MAUDER, Josef ŠTĚTINA, Miloš MASARIK
Influence of Refinement of Primary Cast Steel Structure on Ultrasonic Wave Propagation Velocity .............56
Dariusz BARTOCHA, Jacek SUCHOŃ, Czesław BARON, Jan SZAJNAR
Operational Experiences with the Secondary Cooling Modification of Continuous Slab Casting.................... 62
Josef ŠTĚTINA, Tomáš MAUDER, Lubomír KLIMEŠ, Miloš MASARIK, František KAVIČKA
Determination of Temperature Dependent Cooling Intensity for the Simulation of In-line Heat Treatment .68
Jan KOMÍNEK, Michal POHANKA, Jana ONDROUŠKOVÁ
Parallel Dynamic Solidification Model of Continuous Steel Casting on GPU ...................................................74
Lubomir KLIMES, Josef STETINA
Modeling Viscosity and Surface Tension of CaO - Al2O3 - SiO2 System ............................................................80
Silvie ROSYPALOVÁ, Lenka ŘEHÁČKOVÁ, Rostislav DUDEK, Jana DOBROVSKÁ, L’udovít DOBROVSKÝ,
Monika ŽALUDOVÁ
The Effect of Boundary Conditions of Casting on the Size of Macrosegregation in Heavy Steel Ingots ..........86
Markéta TKADLEČKOVÁ, Pavel MACHOVČÁK, Marek KOVÁČ, Karel GRYC, Karel MICHALEK,
Bedřich SMETANA, Ladislav SOCHA
Influence of Technological Parameters on the Microstructure of the Silicon Cast Iron ..................................92
Marcin STAWARZ
Identification and Control of Secondary Cooling Zone in Continuous Casting of Steel as Distributed
Parameter System ............................................................................................................................................97
Pavol BUČEK, Pavol NOGA, Lukáš TKÁČ, Gabriel HULKÓ
Design of Tundish for Vacuum Over-Pressure Induction Melting Device ......................................................103
Zbyněk HUDZIECZEK, Vladislav KURKA, Petra BĚDROŇOVÁ, Jaroslav PINDOR, Jiří CIENCIALA
Influence of Segregation Processes on Solidification Temperature of Steels ................................................110
Jana DOBROVSKÁ, Bedřich SMETANA, Věra DOBROVSKÁ, Karel STRÁNSKÝ, Hana FRANCOVÁ,
Monika ŽALUDOVÁ
Comparison of Thermal Analysis Results with the Theoretical Determination of Solidus and Liquidus
Temperatures for Specific Steel Grade...........................................................................................................116
Karel GRYC, Bedřich SMETANA, Markéta TKADLEČKOVÁ, Monika ŽALUDOVÁ, Ladislav SOCHA,
Karel MICHALEK, Krystian JANISZEWSKI, Ladislav VÁLEK
Utilization of Biomass in Ironmaking ..............................................................................................................122
Alica MAŠLEJOVÁ
Model Predictive Control of Secondary Cooling Modes in Continuous Casting ............................................128
Anna IVANOVA
The Description of the Mechanism for the Alloy Layer Forming Process based on the Experimental
Examination ....................................................................................................................................................134
Jan SZAJNAR, Agnieszka WALASEK, Czesław BARON
Evaluation of Influence of Fluxing Agents based on Al2O3 on Slag Mode and Process of Steel
Desulphurization in EAF.................................................................................................................................. 140
Ladislav SOCHA, Jiří BAŽAN, Krystian JANISZEWSKI, Petr STYRNAL, Dalibor ČÁP, Gabriel HAÁSZ,
Vladimír CHAMRÁD
Evaluation of the Results of Steel Purity achieved in Steel Production using SSE Method ...........................147
Martin KORBÁŠ, Libor ČAMEK
Checking the Systém of Quality Prediction in Concast Equipment when Producing Microalloyed Steels ....159
Miloš MASARIK, Libor ČAMEK
Effect of Selenium on Metallographic Purity and Formability .......................................................................166
Vladislav KURKA, Jaroslav PINDOR, Zbyněk HUDZIECZEK, Zdeněk ADOLF, Jiří CIENCIALA
Possibilities for Quality Control of Casting Products ......................................................................................171
Renáta LAKOMÁ, Libor ČAMEK
Technological Parameters Influence on Continuous Cast Grey Iron ..............................................................178
Wojciech SEBZDA, Jan SZAJNAR
Theoretical Study of Interaction of Elements in Iron Binary Systems ............................................................185
Jaromír DRÁPALA, Silvie BROŽOVÁ, Michal MADAJ, Gabriela KOSTIUKOVÁ
Metallurgical Processing of Cast Irons and Oxygen Activity...........................................................................193
Jiří HAMPL, Tomáš VÁLEK
Experimental Investigation of Spray Cooling of Horizontally and Vertically Oriented Surfaces ....................198
Martin CHABIČOVSKÝ, Miroslav RAUDENSKÝ
Effect of Rare Earth Element on Microstructure of Fe-B Cast Alloy...............................................................203
Rostislav CHOTĚBORSKÝ, Barbora BRYKSÍ-STUNOVÁ, Marie KOLAŘÍKOVÁ
Influence of the Solution Treatment Temperature upon the Cavitation Erosion Resistance for 17-4 P.H.
Stainless Steels ...............................................................................................................................................208
Ion MITELEA, Ilare BORDEASU, Stefan-Eusebiu KATONA
Possibility to Reduce the Consumption of Hydrocarbon Gases at Flowing Through Concentric Tuyeres .....214
Ladislav KOVÁŘ
A Contribution to the Optimization of the Blast Furnace Material Balance Calculation ...............................219
Břetislav KRČEK
Using of Waste PET (Polyethylene Terephthalate) as an Alternative Reductant in Iron and Steel Industry .224
Gökhan POLAT, Burak BIROL, Muhlis Nezihi SARIDEDE
Technology of Production of New Complex Ferroalloy based on Manganese for Non-furnace Treatment
of Steel ............................................................................................................................................................229
Valentina SALINA, Sailaubai BAISANOV, Ivan RIABCHIKOV, Alexander ALEKSEENKO, Ilia REZNITSKIY
Myths and Questions of Managers about Motivation for Employee Creativeness .......................................234
Andrea SAMOLEJOVÁ, Martin LAMPA, Andrea SIKOROVÁ
SYMPOSIUM B - METAL FORMING................................................................................................................239
Review of Peak Stress Setting.........................................................................................................................240
Jiří KLIBER, Lenka KUNČICKÁ, Ilija MAMUZIC
Computer Simulation of Trimming Process for High Volume Press Production ............................................249
Michal KWIATKOWSKI, Maciej NOWOSIELSKI, Krzysztof ZABA
Computer Analysis of Forming of Round Forged Parts with Mechanical Press and Hammer .......................255
Tomasz MIŁEK
Analysis of Theoretical Methods of Evaluation of Bainitic Hardenability of Steels .......................................261
Maciej PIETRZYK, Roman KUZIAK
Development of the Complex Austenite - Ferrite Transformation Model based on CA Method .................. 267
Rafal GOLAB, Lukasz MADEJ
Flow Stress Determination Methods for Numerical Modelling .....................................................................273
Ivana POLÁKOVÁ, Tomáš KUBINA
Analysis of Metal Flow during Rolling of Z-Section Sheet Pile .......................................................................279
Stanisław TURCZYN, Michał DZIEDZIC, Zbigniew KUŹMIŃSKI
Deformation Behaviour of Surface Layers of Continuously Cast Blanks from C-Mn-Cr Steel ........................285
Stanislav RUSZ, Ivo SCHINDLER, Jaroslav SOJKA, Rostislav KAWULOK, Petr KAWULOK,
Rostislav TUROŇ, Petra TUROŇOVÁ
TPM Method in the Analysis of Flow in the Cold Rolling Mill ........................................................................291
Edward MICHLOWICZ
Modelling of Metal Yielding in Processes of Forging and Stamping ..............................................................297
Konstantin SOLOMONOV, Sergey LEZHNEV
Capacitance Detectors used for Split Hopkinson Pressure Bar Test (SHPBT) and their Comparison with
Numeric Simulation SHPBT.............................................................................................................................305
Ivo DOHNAL, Miroslav ŠLAIS, Milan FOREJT
Influence of Severe Plastic deformation on Mechanical Properties of low Carbon Steel .............................311
Stanislav RUSZ, Vladislav OCHODEK, Lubomír ČÍŽEK, Vít MICHENKA, Tibor DONIČ, Michal SALAJKA,
Stanislav TYLŠAR, Jan KEDROŇ
Tool for Realization severe Plastic Deformation ............................................................................................317
Abdrakhman NAIZABEKOV, Violetta ANDREYACHSHENKO, Jiri KLIBER, Radim KOCICH
The Way to Modify Ultrafine Grain Structure of Medium Carbon.................................................................322
Jozef ZRNÍK, Sergey V. DOBATKIN, Libor KRAUS
Analysis of the Microstructure Evolution of Copper at Equal Channel Angular Pressing ..............................329
Sergey LEZHNEV, Abdrakhman NAIZABEKOV, Irina VOLOKITINA, Oksana CHALAYA
Analysis of Surface Defects of „Dent“ and „Pin-Hole“ Types Formation Process during Cold Rolling ...........335
Abdrahman NAIZABEKOV, Vitaliy TALMAZAN, Almas YERZHANOV
Mini-Thixoforming of Tool Steel X210Cr12 ....................................................................................................341
Hedvika MIŠTEROVÁ, Andrea RONEŠOVÁ, Štěpán JENÍČEK
FEM Model and Experimental Production OF Titanium Rods using Conform Machine ................................ 347
Josef HODEK, Tomáš KUBINA, Jaromír DLOUHÝ
Wire Surface Roughness as Possible Criteria for Evaluation of Dies Wear ....................................................352
Viktor TITTEL, Miroslav ZELENAY, Ľuboš KUDELÁS
Influence of Technological Conditions of drawing on Inhomogeneity of Deformation under Conditions
of Hydro-dynamic Lubrication ........................................................................................................................358
Richard FABÍK
Thermomechanical Processing of P/M Ti-6Al-4V Alloy ..................................................................................364
Marek WOJTASZEK, Tomasz ŚLEBODA
Influence of Chemical Composition on Spreading of Steel at Hot Longitudinal Rolling ................................370
Petr KAWULOK, Stanislav CZERNEK, Ivo SCHINDLER, Rostislav KAWULOK, Stanislav RUSZ,
Zdeněk SOLOWSKI, Karel Milan ČMIEL
Research of a New Method of Deformation - „Pressing - Drawing“ on Mechanical Properties of Steel
Wire ................................................................................................................................................................376
Andrei VOLOKITIN, Abdrakhman NAIZABEKOV, Sergey LEZHNEV
Compensation of Springback Effect in Designing New Pressing Technologies ..............................................380
Maciej NOWOSIELSKI, Krzysztof ŻABA, Paweł KITA, Michał KWIATKOWSKI
Physical Modeling of Seamless Tubes Producing ...........................................................................................385
Petr UNUCKA, Roman NOGA
FEM Simulations and Comparison of the ECAP and ECAP-PBP Influence on Ti6Al4V Alloy’s Deformation
Behaviour........................................................................................................................................................391
Lenka KUNČICKÁ, Radim KOCICH, Jaromír DRÁPALA, Violetta A. ANDREYACHSHENKO
Controlled Surface Treatment with Machine Hammer Peening ....................................................................397
Beatrix ADJASSOHO, Ernst KOZESCHNIK, Christoph LECHNER, Christoph HABERSOHN,
Friedrich BLEICHER, Stefan GÖSSINGER, Christian BAUER, Franz HEINDL, Christian TOMASTIK,
Manel RODRIGUEZ RIPOLL
Comparative Evaluation of Technologic Lubricants .......................................................................................403
Abdrakhman NAIZABEKOV, Dmytry SAMSONOV, Olga KRIVTSOVA, Sergey LEZHNEV,
Vitaly TALMAZAN, Alexandr ARBUZ
Optimization of Low-Temperature Thermo-Mechanical Treatment on 54SiCr Steel for Spheroidization
of Carbides ......................................................................................................................................................408
Vit PILECEK, Ludmila KUCEROVA
Analysis of the Quality of Hot-rolled Steel for Side-Members .......................................................................416
Abdrakhman NAIZABEKOV, Vitaliy TALMAZAN, Olga KRIVTSOVA, Alexandr ARBUZ, Alexandr VIVENTSEV
Combined Process of Helical Rolling with Equal-Channel Angular Pressing ..................................................422
Abdrakhman NAIZABEKOV, Sergey LEZHNEV, Aleksandr ARBUZ
The Springback Analysis at Free Bending by Contact-less Optical Systems ...................................................427
Pavel DOUBEK, Pavel SOLFRONK, Jiří SOBOTKA, Michaela KOLNEROVÁ, Lukáš ZUZÁNEK
Development of Microstructure and Mechanical Properties of Austenitic Stainless Steel after ECAP
Deformation ...................................................................................................................................................431
Miroslav GREGER, Ladislav KANDER
The Use of Computer Techniques to Evaluate the Drawability of the Thin Sheet Metal ..............................438
Monika HYRCZA-MICHALSKA
Model of Hot Deformation Resistance of the Iron Aluminide of the Type Fe-40 at.% Al ..............................444
Rostislav KAWULOK, Petr OPĚLA, Ivo SCHINDLER, Petr KAWULOK
The Influence of Chemical Composition and Microstructure on Wear Mechanism of Equipment Rolls
for Fine Section Mills ......................................................................................................................................450
Janusz KRAWCZYK, Bogdan PAWŁOWSKI, Piotr BAŁA
Plotting of Processing Maps of P91 Steel and Ms70 Brasswith Energy Dissipation and Instability Parameter
Computation on the basis of Plastometric Tests............................................................................................456
Tomáš KUBINA, Jiří KLIBER, Lenka KUNČICKÁ
Optimization of the Tube Rolling Process for 25CrMo4 Steel Grade .............................................................462
Ľudovít PARILÁK, Milan MOJŽIŠ, Tomáš KVAČKAJ, Lucia DOMOVCOVÁ462
Experimental Investigations of „Controlled Impact“ Effect ...........................................................................467
Todor PECHNEV, Ivan ALTAPARMAKOV
Static Recrystallization of Intermetallic Compound of the Type Fe-40 at.% Al-Zr-B ......................................473
Ivo SCHINDLER, Stanislav RUSZ, Pavel HANUS, Jaromír KOPEČEK
Isothermal Forging of P/M FeAl Alloys ...........................................................................................................479
T. ŚLEBODA, S. BEDNAREK, A. Łukaszek-SOLEK
Investigation of Defects IN Forging Tools by Nondestructive Detection Method .........................................485
Dana STANČEKOVÁ, Andrej CZÁN, Michal DERBAS
Dynamic Recrystallization during ECAP of Magnesium Single Crystal ...........................................................491
Petra ŠEDÁ, Aleš JÄGER, Pavel LEJČEK
Numerical Analysis of Production Procedure of Alluminium bellows by Means of Hydroforming ...............496
Martin HYNEK, Luboš ŘEHOUNEK, Petr VOTÁPEK
Characteristics of Copper Wire Drawn Distended for Electrical Cabling by Electron Back Scattering
Diffraction .......................................................................................................................................................502
M. ZIDANI, F. DENDOUGA, S. MESSAOUDI, L. BESSAIS, M. D. HADID, C. DERFOUF, A. L. HELBERT,
T. BAUDIN
SYMPOSIUM C - STEEL PRODUCTS - PROPERTIES ................................................................................. 507
Grain Size Prediction of Steel P92 by Help of Numerical Simulations............................................................508
Jaromír MORAVEC, Josef BRADÁČ, Heinz NEUMANN, Iva NOVÁKOVÁ
Study of High Temperature Properties and Microstructure of Heterogenous P23/P91 Welds during
the Creep Exposure at 500, 550 and 600 oC ................................................................................................... 514
Lucie STŘÍLKOVÁ, Zdeněk KUBOŇ, Vlastimil VODÁREK
Precipitation Processes in AISi 316LN + Nb Steels during Creep at 600 °C ....................................................520
Jan HOLEŠINSKÝ, Vlastimil VODÁREK
Weld Repair of Grade 91 Steel .......................................................................................................................526
J. D. PARKER, J. A. SIEFERT
Investigation of Mechanical Properties of P92 Welded Joints made by MMAW ..........................................532
Petr MOHYLA, Kristýna FOLDYNOVÁ, Miroslav LINDOVSKÝ, Andrea ZAPLETALOVÁ
Evaluation of Kinetics of Austenite Graingrowth of selected Stells used for Heavy Forgings .......................537
Petr ZUNA, Jakub HORNÍK, Jaroslav MÁLEK, František JANDOŠ
A New Development in Thermo-Mechanical Processing of TRIP Steels ........................................................542
Ludmila KUČEROVÁ, Hana JIRKOVÁ, Vojtěch PRŮCHA, Vít PILEČEK
Development in Production of High Formability Boron added Low Carbon Steel .........................................548
Chokchaithananan NUNTAWAT, Takateru UMEDA
Influence of Different Heating Strategies on Stress-Strain behaviour of Continuously Cast Bloom
with and without Internal Defect ...................................................................................................................554
Miroslav KVÍČALA, Karel FRYDRÝŠEK, Aleš HENDRYCH
Effect of Tensile Test Specimen Size on Ductility of R7T Steel .......................................................................560
Bohumír STRNADEL, Jan BRUMEK
Fatigue and Fracture Properties of Heterogeneous Weld Joint 22K - 08CH18N10T .....................................566
P. ČÍŽEK, K. MATOCHA, L. KANDER
Estimation of Fracture Toughness of the Oxide Scales ..................................................................................572
Jozef HRABOVSKÝ, Petr LOŠÁK, Jaroslav HORSKÝ
Microstructure Characterization of Goes after Hot Rolling and Cold Rolling + Decarburization Annealing..578
Vlastimil VODÁREK, Jan HOLEŠINSKÝ, Anastasia MASLOVA, František FILUŠ, Šárka MIKLUŠOVÁ,
Ondřej ŽÁČEK
Influence of Experimental Conditions on Data obtained by Thermal Analysis Methods...............................585
Monika ŽALUDOVÁ, Bedřich SMETANA, Simona ZLÁ, Jana DOBROVSKÁ, Silvie ROSYPALOVÁ,
Daniel PETLÁK, Ivo SZURMAN, Alice ŠTVRTŇOVÁ
Study of Latent Heats of Fe based Metallic Alloys .........................................................................................592
Bedřich SMETANA, Monika ŽALUDOVÁ, Simona ZLÁ, Jana DOBROVSKÁ, Lucie KREJČÍ, Ladislav VÁLEK,
Radim PACHLOPNIK, Alice ŠTVRTŇOVÁ
Plasticity of Steel X50MnAl27-7 with Nickel and Copper Addition ................................................................598
Eva MAZANCOVÁ, Michal CAGALA, Bedřich SMETANA, Monika ŽALUDOVÁ
Hardness of different Manganese Steel Types in Relation to Processing ......................................................604
Eva MAZANCOVÁ, Michal CAGALA, Ivo SCHINDLER
Corrosion behaviour of selected High Manganese Austenitic Steels .............................................................610
Stanislav LASEK, Eva MAZANCOVÁ
Phase Analysis Explosive welded Ti-Cr/Ni Steel in AS-received Statte and after Heat Treatment using
Synchrotron (BW-5) ........................................................................................................................................616
Dmytro OSTROUSHKO, Eva MAZANCOVÁ, Karel SAKSL
Desing of Dual Phase High Strength Steel Sheets for Autobody ....................................................................620
Emil EVIN
Diffusion Characteristics of Hydrogen in the Trip C-Mn-Si-P Steel ................................................................626
Jaroslav SOJKA, Petr ŠTĚPÁN, Petra VÁŇOVÁ
The Effect of Final Surface Treatment of 34CrMo4 Steel on Resistance to Sulphide Stress Cracking (SSC) ..632
Pavel KUČERA, Anastasia MASLOVA, Eva MAZANCOVÁ
Comparison of the Heat affected Zones and Base Metals of 0.5-9 % Cr Steels to Hydrogen Embrittlement
Sensitivity........................................................................................................................................................638
Anna VÝROSTKOVÁ, Roman MACKO, Juraj BLACH, Lucia ČÍRIPOVÁ
Microstructural Characterization of Medium Carbon Dual Phase Steels after Intermediate Quenching .....645
Ersoy ERİŞİR, Serap GÜMÜŞ, Oğuz Gürkan BİLİR
Tempering Response of Sub-Zero Processed Cr-V Ledeburitic Steel Vanadis 6.............................................651
Peter JURČI, Martin KUSÝ, Mária DOMÁNKOVÁ, Lubomír ČAPLOVIČ, Jana SOBOTOVÁ,
Petra SALABOVÁ, Otakar PRIKNER, Darja JENKO
Structure and Properties of Sub-Zero Processed Ledeburitic Tool Steels......................................................657
Jana SOBOTOVÁ, Jiří CEJP, Peter JURČI, Petra SALABOVÁ, Otakar PRIKNER
Laser Welding of DOMEX Steel and Heterogeneous Weld with DC01...........................................................663
Libor MRŇA, Lukáš KOPECKÝ, Tomáš NĚMEČEK, Šárka MIKMEKOVÁ, Ivo DOHNAL
Primary Crystallization of Chromium Část Steel in Metastable Conditions ...................................................669
Andrzej STUDNICKI, Marcin KONDRACKI, Jan SZAJNAR
Elastic-Plastic behaviour of Advanced ADI studied by In-Situ SEM Tensile Test ............................................676
Martin PETRENEC, Hana TESAŘOVÁ, Karel KRAHULA, Jaroslav POLÁK
Controlled Shot Peening of ADI/AGI Castings ................................................................................................682
Z. ANDRSOVA, B. SKRBEK, I. SEJNOHOVA
The Influence of the Kinetics of Phase Transformations during Tempering on the Microstructure
Development in Tool Steel with Different Carbon Content ...........................................................................689
Piotr BAŁA
Microstructure and Microhardness of Low Alloyed Steel 32CDV13 Nitrided by Plasma...............................695
Okba BELAHSSEN, Abdelouahed CHALA, Mohamed Hamza BELAHSSEN, Said BENRAMACHE,
Djamel BENSAHAL, Foued CHABANE
Effect of Heating Rate on Phase Transformations during Tempering of Cr-Mn-Mo Alloy Steels ..................700
Rafal DZIURKA, Jerzy PACYNA, Tomasz TOKARSKI
Effect of Microstructure and TRAP Typology on Hydrogen Redistribution in Steel .......................................706
Daniel GAUDE-FUGAROLAS
Modelling of Nd-YAG Continuously Laser Welding Process of Ti-6Al-4V and X5CrNi18-10 using Factorial
Design .............................................................................................................................................................712
Cosmin Florin GROZA, Dragoş BUZDUGAN, Ion MITELEA
Electron Beam Welds of Austenitic Stainless Steels and ODS Steels .............................................................718
Petr HAVLÍK, Pavel ŠOHAJ
Effect of Cold Deformation on the Properties of New Austenitic Stainless Steel for Boiler Superheater
Tubes ..............................................................................................................................................................724
Šárka HERMANOVÁ, Lenka DOBROVODSKÁ, Ladislav KANDER
Assessment of Energy Dissipation at Initiation Moment of Fracture Process of Low - Carbon Steel ............730
Karel CHOBOT, Martin KRAUS
Effect of Steel Purity on Rotor Degradation ...................................................................................................736
Roman HEIDE, Petr JONŠTA, Zdeněk JONŠTA, Miriam GABČOVÁ, František JANDOŠ
Microstructure and Cavitation Erosion Resistance for Stainless Steels with 12 % Chrom and Variable
Nickel Concentrations .................................................................................................................................... 742
BORDEASU Ilare , MITELEA Ion, JURCHELA Alin Dan, OANCA Octavian
Structure and Properties of A508 Gr. 4N Class 3 Grade Steel ........................................................................748
Ladislav KANDER, Šárka STEJSKALOVÁ, Magdalena ŠMÁTRALOVÁ, Petr ČÍŽEK, Petr PUSTĚJOVSKÝ
Influence of the Solution Treatment Temperature upon the Cavitation Erosion Resistance for 17-4P.H.
Stainless Steel .................................................................................................................................................754
BORDEASU Ilare, MITELEA Ion, KARABENCIOV Adrian, OANCA Octavian
The Influence of Nickel Interlayer for Diffusion Welding of Titanium and Austenitic Stainess Steel ............760
Ladislav KOLAŘÍK, Marie KOLAŘÍKOVÁ, Pavel NOVÁK, Martin SAHUL, Petr VONDROUŠ
The Influence of Resistance Spot Welding on Weld Joint Quality and Service Life of Elektrodes .................766
Marie KOLAŘÍKOVÁ, Ladislav KOLAŘÍK
Determination of Fracture Toughness and Tensile Properties of Structural Steels by Small Punch Test and
Micro-Tensile Test ..........................................................................................................................................772
Pavel KONOPÍK, Jan DŽUGAN, Radek PROCHÁZKA
Degradation of Heat Resistant Steels Components of Power Plant...............................................................778
Martin KRAUS, Jaroslav BYSTRIANSKÝ, Vratislav MAREŠ
Transition Zones Study of the Heterogenous Welded Joints .........................................................................785
Lucie KREJČÍ, Ivo HLAVATÝ, Xenie ŠEVČÍKOVÁ
Influence of Alloy Elements on Corrosion Resistance on Valve Steels in Environment of Combustion Gases of
Gasoline with 5, 10 and 50 % of ethanol Additives ........................................................................................790
Jan NOWAK, Krzysztof ADAMASZEK
Thermo-Mechanical Treatment of forged Products of Ti-V-B Microalloyed Steel.........................................796
Marek OPIELA, Barbara GRZEGORCZYK
Effect of Carbon and Silicon Addition on Mechanical Properties and Microstructure in Nodular Cast Iron .802
Mehmet EKICI, Ugur OZSARAC, Salim ASLANLAR, Faruk VAROL
Effect of Welding on the Properties of HR3C, Super 304H, Tp347HFG and P92 Steels .................................806
Lukáš POMIKÁLEK, Šárka HERMANOVÁ, Lenka DOBROVODSKÁ
Joining of Metallic Composite Materials by CMT Pulse .................................................................................812
Mihaela POPESCU, Radu Alexandru ROŞU ,Cosmin LOCOVEI, Ion Aurel PERIANU
Structure and Electrochemical behaviour of Fe-9Cr-W Alloys with Variable Carbon and Tungsten
Content ...........................................................................................................................................................817
Jiří RAPOUCH, Jaroslav BYSTRIANSKÝ
Effect of forging on Microstructure of Fe-B Cast Steel...................................................................................822
Jarmila SAVKOVÁ, Rostislav CHOTĚBORSKÝ, Olga BLÁHOVÁ
Parameters of Advanced High Strength Steels Weldability ...........................................................................828
Eva SCHMIDOVÁ, Michal KONEČNÝ
Magnetic Spot in Structuroscopy of Steel Products .......................................................................................834
Břetislav SKRBEK, Vladimír NOSEK
The Hydraulic Bulge Test and its Importance for the Vegter Yield Criterion .................................................839
Jiří SOBOTKA, Pavel SOLFRONK, Pavel DOUBEK, Lukáš ZUZÁNEK
Utilization of the Contact-less Optical System for the Bore Expansion Test ..................................................845
Jiří SOBOTKA, Pavel SOLFRONK, Michaela KOLNEROVÁ, Lukáš ZUZÁNEK
Creep Strength Decrease of Cast Steel P91 Weldments ................................................................................851
Tomáš VLASÁK, Jan HAKL, Pavel NOVÁK, Jiří SOCHOR, Jan ČECH
Comparison of results Correlations of the Steels p91, p92 AND 15 313 after Creep Sp Test ........................856
Josef VOLÁK, Zbyněk BUNDA, Eva CHVOSTOVÁ
Texture Development during Recrystallization Process of HS-IF Steels .........................................................861
Peter ZIMOVČÁK, Štefan NIŽNÍK, Martin ČERNÍK, Juraj GRABAN, Ivor KUČERA
Initial Stage of Mutual Diffusion of Carbide in Iron ........................................................................................867
Jiří ČERMÁK, Lubomír KRÁL
Comparison of Diffusion Coeffecients in Initial Stages of Mutual Difusion in Layered Structures
Carbon/Ferrite and Carbon/Austenite Alloys .................................................................................................873
Jiří ČERMÁK, Lubomír KRÁL
SYMPOSIUM D - MODERN TRENDS IN SURFACE ENGINEERING ............................................................ 879
The Influence of the Kind of Surface Treatment on the Wear of Machines Elements Applied in the Textile
Industry...........................................................................................................................................................880
Dariusz JEDRZEJCZYK, Maciej HAJDUGA
Analysis of CrAgN Coating on Vanadis 6 Steel after Pin-On-Disc Testing.......................................................886
Jana BOHOVIČOVÁ, Peter JURČI, Mária HUDÁKOVÁ, Ľubomír ČAPLOVIČ, Martin SAHUL, Pavel BíLEK
The Influence of Side Surface of the Slink on the Nature and Corrosion Resistance of the Hot-Dip Zinc
Coating............................................................................................................................................................892
Sylwia WĘGRZYNKIEWICZ, Dariusz JĘDRZEJCZYK, Dariusz SOŁEK, Ilona SZŁAPA, Maciej HAJDUGA
Effect of Filler on the Surface Roughness of Hard Chromium Composite Coatings.......................................898
Ondřej CHOCHOLATÝ, Antonín KŘÍŽ, Pavla KLUFOVÁ, Tomáš DEVERA
Zirconium alloyed DLC Layers for Biomedical Applications............................................................................903
Luděk JOSKA, Jaroslav FOJT, Hynek MORAVEC, Vítězslav BŘEZINA
Bacteria as the Menace to Human Live in Sanitary Ambulances ...................................................................909
Marta HAJDUGA, Rafał Jakub BUŁDAK, Sylwia WĘGRZYNKIEWICZ, Dariusz SOŁEK, Maciej HAJDUGA,
Dariusz JEDRZEJCZYK
Spraying Parameters Study of HVOF Coatings based on CrC .........................................................................915
Šárka HOUDKOVÁ, Zdeněk ČESÁNEK, Michaela KAŠPAROVÁ, Jan SCHUBERT
Laser Re-Melting of HVOF Sprayed NICrBSi Coatings.....................................................................................921
Marek VOSTŘÁK, Matěj HRUŠKA, Šárka HOUDKOVÁ
Evaluation of Effects of Laser Hardening on Fatigue Resistance of 42CrMo4 Steel ......................................926
Ivo ČERNÝ, Dagmar MIKULOVÁ, Jiří SÍS
The X-Ray Diffraction Analysis of Phase Evolution in Zn-Al-Mg Coating Layer ..............................................931
Kristián ŠALGÓ, Martin KUSÝ
Evaluation of Corrosion Resistance of Zinc Coatings on Component of the Ambulance ...............................936
Ilona SZŁAPA, Dariusz JĘDRZEJCZYK, Maciej HAJDUGA, Sylwia WĘGRZYNKIEWICZ, Dariusz SOŁEK
Investigation of DLC Coating and its Influence on the Mechanical Properties of Titanium Alloy TI-6Ai-4V
by Means of Automated Ball Indentation Test ..............................................................................................943
Maxim PUCHNIN, Evgeniy ANISIMOV
Surface Roughness Determination using Laser Scanning Confocal Microscope Zeiss LSM 700 .................... 947
Tomáš BEZÁK, Martin KUSÝ, Michal ELIÁŠ, Michal KOPČEK
Study of Influence Corrosive Environment on Characteristics Protective Coatings used for Long-Term
Corrosion Protection of Steel Substrate .........................................................................................................953
Jitka PODJUKLOVÁ,Kateřina SUCHÁNKOVÁ, Petr ŠRUBAŘ,Sylvie KOPAŇAKOVÁ, Kamila HRABOVSKÁ
CrAg7N Nanocomposite Coatings Deposited of Cr-V Ledeburitic Steel .........................................................959
Pavel BÍLEK, Peter JURČI, Mária HUDÁKOVÁ, Jana BOHOVIČOVÁ, Jana SOBOTOVÁ
Kinetics of Iron Silicide Deposited on AISI D2 Steel by Pack Method .............................................................965
Ugur SEN, Ozkan OZDEMIR, Senol YILMAZ, Saduman ŞEN
Corrosion Resistance of Plasma Nitrided Structural Steels ............................................................................971
David KUSMIČ, Vojtěch HRUBÝ
Deposition of Alumina Ceramic Biocompatible Layers by Plasma Spraying ..................................................977
Radu Alexandru ROŞU, Mihaela POPESCU, Viorel-Aurel ŞERBAN, Ion Aurel PERIANU
Comparison of NiCrBSi Coatings, HVOF Sprayed, Re-Melted by Flame and by High-Power Laser ................982
Šárka HOUDKOVÁ, Marek VOSTŔÁK, Matěj HRUŠKA, Jan ŘÍHA, Eva SMAZALOVÁ, Zdeněk ČESÁNEK,
Jan SCHUBERT
Corrosion Resistance of Coating and No Coating Materials at the Glass Industry.........................................988
Michaela FEDOROVÁ, Františka PEŠLOVÁ, Rastislav TALAŠ
Utilization of Micro-Indentation Methods for Evaluation of the Degradation Rate of Polymeric Materials at
Extending Equipment Lifetime of the Safety-Related Systems of Nuclear Power Plants ..............................994
ŠTĚPÁNEK Ivo, TENGLER Marek, SLADKÁ Jana
Standard and Scanning Laser Hardening Procedure ....................................................................................1009
Matěj HRUŠKA, Marek VOSTŘÁK, Eva SMAZALOVÁ, Michal ŠVANTNER
Structural Stability of Plasma Sprayed CoNiCrAlY - ZrO2+Y2O3 Thermal Barrier Coatings after Isothermal
Exposure at 1050 °C......................................................................................................................................1015
David JECH, Ladislav ČELKO, Lenka KLAKURKOVÁ, Simona HUTAŘOVÁ, Martin JULIŠ, Jiří ŠVEJCAR
The Effect of Heat Treatment Parameters on Crystallization of Basalt Base Glass Coatings .......................1021
Gunhan BAYRAK, Ediz ERCENK, Ugur SEN, Senol YILMAZ
Mechanical Compatibility Of Ti Coatings deposited by HVOF Thermal Spraying ........................................1027
Elena Simona CUTEAN, Ion MITELEA, Viorel - Aurel ŞERBAN, Florin Marian CORNEA
Influence of Feed Speed on Machined Surface Quality ...............................................................................1033
Robert ČEP, Jana PETRŮ, Tomáš ZLÁMAL, Jan VALÍČEK, Marta HARNIČÁROVÁ, Adam JANÁSEK,
Lenka ČEPOVÁ
Comparison of Abrasive Wear Resistance between HVOF Thermally Sprayed Alloy-based and Cermet
Coatings ........................................................................................................................................................1039
Zdeněk ČESÁNEK, Šárka HOUDKOVÁ, Jan SCHUBERT, Michaela KAŠPAROVÁ
Properties of Elektro Sparc deposited Stellite Coating on Mild Steel ..........................................................1045
Wojciech DEPCZYŃSKI, Norbert RADEK
Influence of Coatings Chemical Composition on Corrosion Resistance of Galvanized Steel .......................1051
Juraj GRABAN, Mária KOLLÁROVÁ, Peter ZIMOVČÁK, Ivor KUČERA, Viera KOHÚTEKOVÁ,
František HOLLÝ
Surface Integrity Analysis in Laser Beam Cutting Process ............................................................................1057
Marta HARNIČÁROVÁ, Jan VALÍČEK, Robert ČEP, Jana PETRŮ, Lenka ČEPOVÁ
Hot Corrosion behaviour of Cr Modified Aluminide Coatings deposited on Nickel Superalloy in 713 LC ...1063
Ján KAFRÍK, Jaroslav TRNÍK, Ondřej DVOŘÁČEK
Microstructuring of Metallic Layers for Sensor Applications .......................................................................1069
Vladimír KOLAŘÍK, Stanislav KRÁTKÝ, Michal URBÁNEK, Milan MATĚJKA, Jana CHLUMSKÁ,
Miroslav HORÁČEK
Application of New Types of Metal Sheet Surface Modification for the Car-Body Design - Quality
Assessment of the Bonded Joints .................................................................................................................1074
Michaela KOLNEROVÁ, Jiří SOBOTKA, Pavel SOLFRONK, Pavel DOUBEK, Lukáš ZUZÁNEK
Monitoring the behavior of Resistive Layers on the Inserts of Intride Cutting Ceramics during
Longitudinal Turning of Steel .......................................................................................................................1080
Jiří KRATOCHVÍL, Lenka PETŘKOVSKÁ
Evolution of Texture and Mechanical and Electrical Properties in the Copper Wires: Drawn
and Annealed................................................................................................................................................1085
Salim MESSAOUDI , Mosbah ZIDANI, Chems Eddine DERFOUF, Marie Hélène MATHON,
Thierry BAUDIN
A study Regarding the Comparation between Photovoltaic Cells ...............................................................1091
Ana Talida PACURAR, Dumitru TOADER, Cristian PACURAR
Photovoltaic Panels - Application of Nanomaterials ....................................................................................1095
Cristian PACURAR, Ana Talida PACURAR, Dumitru TOADER
Effect of Spray Parameters on the Properties of HVOF Sprayed Coatings with Changing Co Content
based on Tungsten Carbide ..........................................................................................................................1100
Jan SCHUBERT, Šárka HOUDKOVÁ, Zdeněk ČESÁNEK, Michaela KAŠPAROVÁ
Influence of Anticoagulants on Properties of Transparent Water-based Paint Systems .............................1106
Kateřina SUCHÁNKOVÁ, Petr ŠRUBAŘ, Jitka PODJUKLOVÁ, Richard DVORSKÝ, Sylvie KOPAŇAKOVÁ,
Jan BRUMEK, Kateřina KONEČNÁ
The Static Test Material Optimization for Solid Propellant Case .................................................................1112
Ornin SRIHAKULUNG
Mechanical and Corrosion Properties of Galvanic Coatings based on Zinc .................................................1117
Xenie ŠEVČÍKOVÁ, Lucie KREJČÍ, Kateřina KONEČNÁ
Microstructural Turbine Blades Analyses after Endurance Test F Aircraft Engine.......................................1123
Jaroslav TRNÍK, Ján KAFRÍK, Ondřej DVOŘÁČEK
The Effect of Heat Treatment on the Structure of Scale Layer and its removing by Pickling in Reducing
Melt ..............................................................................................................................................................1129
Petra VÁŇOVÁ, Roman PĚNČÍK, David ČEMPEL, Kateřina KONEČNÁ
Characterization of the Friction Layer formed on the Část Iron and Stainless Steel Brake Discs during the
Friction Test ..................................................................................................................................................1137
Jiřina VONTOROVÁ, Vlastimil MATĚJKA, Miroslav VACULÍK
SYMPOSIUM E - NON-FERROUS METALS AND ALLOYS ........................................................................1143
Physical and Chemical Fundamentals of Creation of Cast Sacrificial Alloys .................................................1144
Vladimir KECHIN
Influence of Repeated Remeltings on Formation of Structure of Castings from Aluminum Matrix
Composite Alloys ..........................................................................................................................................1152
Evgeny PRUSOV, Alexey PANFILOV
Analytical Methods Suitable for Rapidly Solidified Alloys ............................................................................1157
Alena MICHALCOVÁ, Pavel NOVÁK, Dalibor VOJTĚCH, Jakub ČÍŽEK, Ivo MAREK, Milena VODĚROVÁ
Thermal Stability of Rapidly Solidified Al-Fe-X Alloys ...................................................................................1161
Milena VODĚROVÁ, Pavel NOVÁK, Alena MICHALCOVÁ, Dalibor VOJTĚCH
Influence of Recycling of Cast Aluminium Alloys on the Microstructure and Mechanical Properties .........1165
Marek BŘUSKA, Petr LICHÝ, Michal CAGALA, Jaroslav BEŇO, Miroslav BODROG, David ŽÁČEK
Effect of Internal Defects on Tensile Properties of A356 Casting Alloys ......................................................1171
Jie CHENG, Norbert HORT, Karl Ulrich KAINER, Siyoung KWAK
Horizontal Continuous Casting of Al and Al-Si Alloy In Semi-Industrial Conditions .....................................1177
Tomasz WRÓBEL, Jan SZAJNAR
Al-Si-Fe-Mn based Alloy prepared by Centrifugal Spraying and Die Forging ...............................................1183
Karel DÁM, Dalibor VOJTĚCH
Mechanical Properties and Thermal Stability of AlSi-X based Alloys prepared by Centrifugal
Atomization ..................................................................................................................................................1189
Filip PRŮŠA, Dalibor VOJTĚCH
Current State and Trends of Development of Aluminum Matrix Composite Alloys ....................................1195
Alexey PANFILOV, Evgeny PRUSOV
Investigation of Mechanical Properties of Aluminum based Metal Matrix Composites at Elevated
Temperatures ...............................................................................................................................................1200
Werner HUFENBACH, Maik GUDE, Andrzej CZULAK, Bartlomiej PRZYBYSZEWSKI, Piotr MALCZYK
Influence of Stress Decay Heat Treatment on the Improvement of Mechanical Properties of Aluminum
based Metal Matrix Composites ..................................................................................................................1205
Werner A. HUFENBACH, Maik GUDE, Andrzej CZULAK, Piotr MALCZYK, Bartlomiej PRZYBYSZEWSKI
Optimization of Ultrasonic Wlding Parameters and Temperature Distribution in Metal Matrix Composite
based on Aluminium .....................................................................................................................................1211
Marius POP-CALIMANU, Dinu GUBENCU, Ioana POP-CALIMANU, Traian FLESER
Effect of Load Asymmetry and Grain Orientation on Fatigue Crack Growth in Stable and Threshold
Regions in an Aircraft AL 2124-T851 Alloy ...................................................................................................1218
Ivo ČERNÝ
Microstructure and Mechanical Properties of the Cold-Rolled Al-Mn and Al-Mn-Sc-Zr Alloys ...................1224
Martin VLACH, Ivana STULÍKOVÁ, Bohumil SMOLA, Hana KUDRNOVÁ, Tomáš KEKULE,
Vladivoj OČENÁŠEK, Jaroslav MÁLEK, Dhritti TANPRAYOON, Volkmar NEUBERT
Twin-roll Cast Aluminum Alloys Processed by ECAP ....................................................................................1230
Michaela POKOVÁ, Miroslav CIESLAR, Přemysl MÁLEK
Thermophysical Properties and Microstructure of Selected Magnesium Alloys .........................................1236
Petr LICHÝ, Jaroslav BEŇO, Michal CAGALA, David ŽÁČEK
Influence of Mechanical and Thermal Treatment on Mechanical and Biodegradation Properties of
Magnesium Alloys ........................................................................................................................................ 1242
Jiří KUBÁSEK, Milena VODĚROVÁ, Dalibor VOJTĚCH
Evaluation of Hydriding Parameters in Mg─Ni-based Alloys Doped with Transition Metals .......................1249
Vítězslav KNOTEK, Dalibor VOJTĚCH
Utilization of Ecological Friendly Cores for Magnesium Alloys Castings ......................................................1255
Jaroslav BEŇO, Petr LICHÝ, Eliška ADÁMKOVÁ, Michal CAGALA, Petr JELÍNEK, Marek BŘUSKA,
Karel GÁL, Marcin MORYS
Formation of a Mg-Al-Zn Intermetallic Surface Layers on Magnesium .......................................................1261
Renata MOLA, Wojciech DEPCZYŃSKI
Dynamic Recrystallization during Hot Deformation of Mg-Zn-Ca ................................................................1266
Monika HRADILOVÁ, Pavel LEJČEK
In-situ Neutron Diffraction and Acoustic Emission Investigation of Microstructure Evolution
in Magnesium ...............................................................................................................................................1272
Jan ČAPEK, Kristián MÁTHIS, Petr LUKÁŠ, Přemysl BERAN
The Efect of Microstructure on Mechanical Properties of Single Crystal CMSX-4 Superalloy .....................1277
Juraj LAPIN, Tatiana PELACHOVÁ, Oto BAJANA
Microstructural Evaluation of IMPAC IN718: Higher Temperature Application Range for an Old
Superalloy .....................................................................................................................................................1283
DI GIANFRANCESCO, P. LOMBARDI, D. VENDITTI
The Influence of Zr on Microstructure of Beta-Titanium Alloys...................................................................1295
Jaroslav MÁLEK, František HNILICA, Jaroslav VESELÝ
Powder Metallurgy Preparation of Porous Titanium for Medical Implants .................................................1301
Pavel NOVÁK, Ladislav SITA, Anna KNAISLOVÁ, Dalibor VOJTĚCH
The Effect of Chemical Composition and Microstructure on Elastic Modulus and Hardness of Biomedical
Titanium Alloys based on Ti-Nb-Zr-Ta Composition with Small Fe and Si Additions ...................................1307
Josef STRÁSKÝ, Miloš JANEČEK, Petr HARCUBA, Michal LANDA
Tribological Properties of Ti-Si-Zr Alloys.......................................................................................................1313
Sergey TKACHENKO, Oleg DATSKEVICH, Leonid KULAK, Håkan ENGQVIST, Cecilia PERSSON
New Ti-alloys with Superior Specific Strength..............................................................................................1319
Mohamed Abdel-Hady GEPREEL, Mitsuo NIINOMI
Preparation of the NiTi Shape Memory Alloy by the TE-SHS Method - Influence of the Sintering Time ....1323
Jaroslav ČAPEK, Vojtěch KUČERA, Michaela FOUSOVÁ, Dalibor VOJTĚCH
Influence of Solidification Parameters on the Distribution of the Alloying Elements during Directional
Solidification of the Intermetallic TI-44AL-5NB-0.2B-0.2C Alloy ................................................................. 1328
Alena KLIMOVÁ, Zuzana GABALCOVÁ, Juraj LAPIN
Directional Solidification and Solidification behaviour of g-TiAl Intermetallics wiht Higher Carbon
Contents .......................................................................................................................................................1334
Tomáš ČEGAN, Miroslav KURSA
Creep Damage Characterisation of Intermetallic Ti-46Al-8Ta Alloy Under Thermal Cycling Creep ............1341
Hana STANEKOVÁ, Juraj LAPIN
Preparation and Properties of Boride Layers on TiAl Intermetallics ............................................................1347
Tomáš POPELA, Dalibor VOJTĚCH
Effects of AdditionS and Heat Treament on the Microstructure and Magnetic Properties of Sintered
Nd-Fe-B Magnets .......................................................................................................................................... 1353
Vladimir P. MENUSHENKOV, Aleksander G. SAVCHENKO, Kateřina SKOTNICOVÁ, Miroslav KURSA
Study of Diamond-like Coating deposited on the Surface of Nd-Fe-B-Type Sintered Magnets ..................1358
Natalia KOLCHUGINA, Aleksandr LUKIN, Gennadii BURKHANOV, Georgii SPRYGIN, Miroslav KURSA,
Katerina SKOTNICOVA, Aleksandr KOSTYUCHENKO
The Effect of Thermal Stabilization on the Composition, Microstructure and Magneric Properties of
Nd-Fe-B sintered Magnets............................................................................................................................1364
Kateřina SKOTNICOVÁ, Tomáš ČEGAN, Michal LESŇÁK, Miroslav KURSA, Kateřina KONEČNÁ
Properties of Ni/Cu/Ni and Ni Coatings for Corrosion Protection of NdFeB Base Magnets ........................1371
Stanislav LASEK, Nela DOBROVODSKÁ, Kateřina SKOTNICOVÁ
Peculiarities of Obtaining Castings of Alloys with Stoichiometric Compositions with Peritectic
Transformations ........................................................................................................................................... 1377
Evgeny SIDOROV, Mikhail PIKUNOV, Jaromír DRÁPALA
Investigation of Mechanical Properties of Composite Skeleton Casting .....................................................1383
Tomasz SZUTER, Mirosław CHOLEWA, Werner HUFENBACH, Andrzej CZULAK
Preparation of Multiphase Materials with Spark Plasma Sintering .............................................................1389
Radek MUŠÁLEK, Zdeněk DLABÁČEK, Monika VILÉMOVÁ, Zdenek PALA, Jiří MATĚJÍČEK,
Tomáš CHRÁSKA
Microstructure and Properties of Nanocrystalline LaB6 Powders Synthesized in a High Energy Planetary
Ball Mill .........................................................................................................................................................1395
Duygu AĞAOĞULLARI, Özge BALCI, İsmail DUMAN, M. Lütfi ÖVEÇOĞLU
Study on Bulk Nanocrystalline Copper prepared by Selective Dissolving ....................................................1401
Ivo MAREK, Dalibor VOJTĚCH, Alena MICHALCOVÁ, Vítězslav KNOTEK
Influence of the Chemical Composition on the Selected Properties of Lead-free Solders ..........................1406
Lýdia RÍZEKOVÁ TRNKOVÁ, Marián DRIENOVSKÝ, Ján LOKAJ, Milan OŽVOLD
Wastes of Processing of Combustible meta-bearing Slates of Uzbekistan, as Perspective Raw Material
for Metallurgy ...............................................................................................................................................1413
V. P. GURO
T Zone of Sic Particulate Reinforced AZ91D Magnesium Alloys under Ballistic Impact on a Specially
Designed Gravitational Ballistic Test Apparatus...........................................................................................1418
Cem AKÇA, Yaman ERARSLAN
Casting Routes for Porous Metals with Regular and Irregular Structure .....................................................1423
Vlasta BEDNÁŘOVÁ, Petr LICHÝ, Ivo LÁNA, Tomáš ELBEL
The Recycling of Metal Waste Production Monocrystal of Permanent Magnets ........................................1429
Igor V. BELYAEV, Alexandr V. MOISEEV, Alexey A. STEPNOV, Alexandr V. KUTEPOV
Microstructure and Properties of Hot Pressed Fe-50 % Co Sinters..............................................................1432
Joanna BOROWIECKA-JAMROZEK
Intergranular Fracturing Susceptibility of Metallic Nickel Having Small Bulk Content in Sulphur ...............1438
Djamal BOUTASSOUNA, René Le GALL, Ibn Khaldoun LEFKAIER
Tungsten Coatings and Free Standing Parts .................................................................................................1443
Vlastimil BROŽEK, Pavel CTIBOR, Jiří MATĚJÍČEK, Radek MUŠÁLEK, Zdeněk WEISS
Study of Deformation Mechanisms of a Mg-Al-Sr Alloy Reinforced with Short Saffil® Fibres......................1449
Gergely FARKAS, Zuzana ZDRAŽILOVÁ, Kristián MÁTHIS
DSC Analysis of an ECAP-deformed Cu-Ni-Si Alloy .......................................................................................1455
F. Hadj LARBI, K. ABIB, Y. KHEREDDINE, B. ALILI, M. KAWASAKI, D. BRADAI, T.G. LANGDON
Effect of Mn-content on the Phases Stability of Binary Ti-Mn Alloys ..........................................................1461
Mohammed K. GOUDA, Mohamed Abdel-Hady GEPREEL, A. ABD El-MONIEM
Analysis of New Technology Forging Monolithic Forged Bottoms...............................................................1468
Miroslav GREGER, Jiří PETRŽELA, Vladimír LÁZLÓ, Miroslav JUHAS
Study of the Factors Influence on the Objective Functions of Wire EDM of AA2124/SiC/25p ....................1474
Dinu GUBENCU, Marius POP-CALIMANU
Mechanical Properties and Microstructure Evolution of Ultra-fine grained CP Ti.......................................1480
Petr HARCUBA, Michal HÁJEK, Pavel ZHÁŇAL
The In Vitro Effect of Alloying Elements used in Biodegradable Magnesium Implants on Eukaryotic Cell
Matabolism ...................................................................................................................................................1486
Eva JABLONSKÁ, Jiří KUBÁSEK, Marek SCHWARZ, Jan LIPOV, Dalibor VOJTĚCH, Tomáš RUML
Assessment of the Structure and High Temperature Strength of Fe-35Al-5Zr Intermetallic Alloy..............1491
Pavel KEJZLAR, Eva MACAJOVÁ, Lukáš VOLESKÝ, Petr KRATOCHVÍL
Influence of Production and Heat Treatment on Microhardness and Phase Transformations
in Mg-Y-(Nd)-Zn Alloys.................................................................................................................................. 1498
Tomáš KEKULE, Ivana STULÍKOVÁ, Bohumil SMOLA, Martin VLACH, Hana KUDRNOVÁ
Structural Peculiarities of Sintered (Nd,Pr,Dy,Tb)-Fe-B Magnets prepared from TbH2-Containing Powder
Mixtures........................................................................................................................................................1504
Natalia KOLCHUGINA, Aleksandr LUKIN, Gennadii BURKHANOV, Andrei DORMIDONTOV,
Miroslav KURSA, Katerina SKOTNICOVA, Henrik DRULIS
The Analysis of Forging Inconel 718 Alloy ....................................................................................................1510
Aneta ŁUKASZEK-SOŁEK, Janusz KRAWCZYK, Piotr BAŁA, Marek WOJTASZEK
Effect of Nb on the Phase Transformation in Biocompatible TiNb-based Alloys .........................................1516
Monika LOSERTOVÁ, Petr ŠTĚPÁN, Bedřich SMETANA, Monika ŽALUDOVÁ
ModelLing OF Ternary Alloy Systems using Matlab Software ......................................................................1521
Michal MADAJ, Zuzana MORÁVKOVÁ, Jiří VRBICKÝ, Jaromír DRÁPALA
Structural and Fracture Characteristics of Nickel-based Alloys ...................................................................1528
Jitka MALCHARCZIKOVÁ, Vít MICHENKA, Martin POHLUDKA, David KAŇÁK, René FRIDRICH
Tensile Testing at High Strain Rates using DIC Method................................................................................1533
Martina MAREŠOVÁ, Pavel KONOPÍK
Structure and Magnetic Properties of SrFe12O19 Hexaferrite prepared from Submicron-sized Powders....1538
Vladimir P. MENUSHENKOV, Vladimir P. SHUBAKOV, Dmitriy Yu. KUDASOV
Effect of High-pressure Torsion on the Structure and Magnetic Properties of As-cast Nd9.5Fe84.5B6 Alloy .1542
Svetlana V. POLIKUTKINA, Vladimir P. MENUSHENKOV, Sergei V. SKORODUMOV,
Michael ZEHETBAUER, Jelena HORKY
Evolution of the Microstructure, Mechanical Properties and Corrosion Resistance of AE21 Magnesium
Alloy after ECAP ............................................................................................................................................1546
Peter MINARIK, Robert KRAL, Milos JANECEK, Josef PESICKA
Plastic Instabilities in AlMg4.5Mn Alloy Sheet .............................................................................................1551
Orsolya MOLNÁROVÁ, Patrik DOBROŇ, František CHMELÍK
Formation and Thermal Stability of Intermetallics in Al-Cu-Fe Alloys..........................................................1556
Pavel NOVÁK, Milena VODĚROVÁ, Lucie MEJZLÍKOVÁ, Alena MICHALCOVÁ, Dalibor VOJTĚCH
Phenomenology of Degtradation by Cavitation for Heat Treated Cu-Al-Ni-Fe Bronzes ..............................1561
Ilare BORDEASU, Octavian OANCĂ, Ion MITELEA, Corneliu CRĂCIUNESCU
Structure and Mechanical Properties of Nickel Alloys .................................................................................1567
Martin POHLUDKA, Jitka MALCHARCZIKOVÁ, Vít MICHENKA, Miroslav KURSA, Tomáš ČEGAN,
Ivo SZURMAN
Mechanical Properties of Zn-Mg Alloys........................................................................................................1573
Iva POSPÍŠILOVÁ, Dalibor VOJTĚCH
On the Dependence of the Structures of the Solid Solution Alloy Castings on the crystallization Character
Indices ...........................................................................................................................................................1577
Evgeny SIDOROV, Jaromír DRÁPALA, Mikhail PIKUNOV
Possibilities of Ni-Ti based Alloys Recycling .................................................................................................1587
Ivo SZURMAN, Miroslav KURSA, Daniel KOCH
Ageing Study of TIMETAL LCB Titanium Alloy ..............................................................................................1592
Jana ŠMILAUEROVÁ, Miloš JANEČEK, Petr HARCUBA, Josef STRÁSKÝ
The Effect of Zirconium Content on the Phase Structure of Fe3Al-xC Type Intermetallic Alloys .................1597
Věra VODIČKOVÁ, Petr KRATOCHVÍL, Stanislav DANIŠ, Martin ŠVEC
Experimental Study of Ultrafine-grained Commercial Magnesium Alloy AZ31 prepared by Severe Plastic
Deformation Method ...................................................................................................................................1603
Jitka VRÁTNÁ, Miloš JANEČEK
Mechanical Properties and Microstructure of IN713LC Nickel Superalloy Castings ....................................1608
Jiří ZÝKA, Irena ANDRŠOVÁ, Božena PODHORNÁ, Karel HRBÁČEK
Failure Analysis of the Ttanium Alloy Horn used in Ultrasonic Processing of Polymeric Materials in the
Automotive Industry..................................................................................................................................... 1613
SÎRBU Nicuor Alin, OANCĂ Octavian, ȘERBAN Șerban-Iancu
SYMPOSIUM F - ECONOMY AND MANAGEMENT OF METALLURGICAL PRODUCTION ..........................1619
Complex Application of Statistical Process Control in Conditions of Profile Bars Production .....................1620
Darja NOSKIEVIČOVÁ, Eva JAROŠOVÁ
The Production Capacity Planing Model in Term of Supply Chain Management ........................................1629
Dušan MALINDŽÁK, Peter KAČMÁRY, Lucia BEDNÁROVÁ, Jana VRLÍKOVÁ
Improving of Processes in the Metallurgical Company focusing on Information and Human Resources
Processes ......................................................................................................................................................1638
Jiří CIENCIALA, Vladimír KRAJČÍK, Marek TACINA
Preference of Information Sources on the Market of Stainless Steel Products ...........................................1644
Vojtěch SPÁČIL
Support for Maintenance and Technology Control on Slab Device of Continuous Casting .........................1650
Jiří DAVID, Pavel ŠVEC, Robert FRISCHER
Possibility of Continuous Reheating Furnaces Control using Simplified Models .........................................1656
Milan HEGER, Ivo ŠPIČKA, Jiří FRANZ
Analysis of Robust Technology Design Methods ..........................................................................................1662
Josef TOŠENOVSKÝ, Filip TOŠENOVSKÝ, Ondřej KUDĚLKA
Stochastic Control of Process Times based on Working Performance ........................................................1668
Filip TOŠENOVSKÝ
BSC-approach for Supply Chain Deviations Management ...........................................................................1672
Steffen REINECKE, Radim LENORT
Application of Social Life Cycle Assessment in Metallurgy ...........................................................................1679
VAVRA Jan, BEDNARIKOVA Marie
Issues of Corporate Social Responsibility Web Site Communication of mMetal Industry Companies ........1685
Alena KLAPALOVÁ
Determination of the Technology Place in the Metal Company on the Basis of the Toyota´s
Management Pronciples...............................................................................................................................1691
Stanisław BORKOWSKI, Joanna ROSAK-SZYROCKA, Dorota KLIMECKA-TATAR, Marta JAGUSIAK-KOCIK,
Piotr SYGUT
Aspects of Ferrous Metallurgy Development in Kazakhstan at the Example of ArcelorMittal Temirtau
JSC .................................................................................................................................................................1697
Victoria LEZHNEVA, Sergey LEZHNEV
Approaches to the Process Capability Analysis in the Case of Non-Normally Distributed Product Quality
Characteristic ................................................................................................................................................1700
Jiří PLURA, Milan ZEMEK, Pavel KLAPUT
Allocation of Internal Activity Costs in Production Enterprises ...................................................................1706
Paweł KUŻDOWICZ
The Issues Relating to Reporting and Valuation of Long-term Tangible Fixed Assets in Acounting
of Industrial Enterprise ................................................................................................................................. 1712
Zdeněk SCHWARZ, Jana BUCHTOVÁ, Petra BERANOVÁ
Motivational Potential of Strategic Controlling............................................................................................1717
Marcela BLACHOVÁ MIKŠOVÁ
Possible Application of Quality House in Industrial Supply Chain Resilience Assessment...........................1722
Roman MAROUŠEK
Possibilities of Detection of Interactions between Parts and Appraisers in the Gage Repeatability and
Reproducibility Study using Graphical Tools ................................................................................................1729
Pavel KLAPUT, Jiří PLURA
Economical Aspects of High-temperature Heating Utilization for Industrial Waste Treatment..................1735
Silvie BROŽOVÁ, Manuela INGALDI, Ivan ŠPERLÍN
Sustainability and Eco-Efficiency Assessment of Biomass Use in Steelmaking ............................................1740
Dorota BURCHART-KOROL
Commercialization of the „Legnica“ Copper Smelter - Key Aspect of Change .............................................1747
Urszula BĄKOWSKA-MORAWSKA
Prediction of a Heating Process in Continuous Furnaces with Regard to the Economy of Operation ........1755
Ivo ŠPIČKA, Milan HEGER
Modeling of Circle Crystallizer ......................................................................................................................1761
Pavel ŠVEC, Jiří DAVID, Robert FRISCHER
Fuzzy Logic Model for Evaluation of Lean and Agile Manufacturing Integration ........................................1767
Tatiana USTYUGOVA, Darja NOSKIEVIČOVÁ
Situation in Waste Treatment in Poland ......................................................................................................1773
Edyta KARDAS, Silvie BROŽOVÁ
Economy and Possibilities of Waste Utilization in Poland ...........................................................................1779
Manuela INGALDI, Simona JURSOVÁ
Energy Exploitation of Industrial Waste .......................................................................................................1785
Simona JURSOVÁ, Pavlína PUSTĚJOVSKÁ, Silvie BROŽOVÁ
Managing Innovation in Metallurgy .............................................................................................................1790
Sebastian BAKALARCZYK
Development of Value Productivity in Metallurgical Industry .....................................................................1795
Jiří KLEČKA, Dagmar ČÁMSKÁ
Changing Financial Ratios of Basic Metals Manufacturing Companies in Poland ........................................1801
Przemysław POMYKALSKI
Provisions in the Metallurgical Industry in the Czech Republic ...................................................................1805
Michal BOBEK
Main Trends in Financial Health Among Companies related to Metallurgical Industry in Central Europe .1811
Jiří HÁJEK, Dagmar ČÁMSKÁ
Implementation Procedure of Lean Methods in Logistics Processes ...........................................................1817
Roman BEDNÁR, Natália HORŇÁKOVÁ, Helena VIDOVÁ
Innovation in the System of Iron ORE Evaluation ........................................................................................1823
Petr BESTA, Andrea SAMOLEJOVÁ, Kamila JANOVSKÁ, Martin LAMPA
Monitoring the Quality of Suppliers of Input Raw Materials in Metallurgical Production ..........................1829
Petr BESTA, Milan MIKOLÁŠ, František ZAPLETAL, Jindřich HAVERLAND, Miroslav HENDRYCH
Is a Joint Owner a Guarantee of Coordinated Efforts of Entities in the Value Network? ............................1835
Lenka BRANSKA, Hana LOSTAKOVA, Zuzana PECINOVA
Innovations as a Factor of Business Models Dynamics in Metallurgical Companies ...................................1842
Jan BRZÓSKA
Ant Colony Optimization: Survey on ApplicationS in Metallurgy .................................................................1849
Martin ČECH, Šárka VILAMOVÁ
Control and Controlling in the System of Personal Management in the Industrial Plant ............................1854
Ivana DLUGOŠOVÁ
Companies Financial Performance Determanitation Applying the Data Envelopment Analysis (DEA)
Method .........................................................................................................................................................1860
Dana DLUHOŠOVÁ, Zdeněk ZMEŠKAL
Production Logistics Concepts and Systems in Metallurgical Companies....................................................1867
Radim LENORT, Jerzy FELIKS, Leo TVRDOŇ
Vulnerability of Industrial Supply Chain .......................................................................................................1873
Martin FOLTA, Petr NOVOTNÝ
Usage of Clustering Analysis in Diagnostics of Metallurgical Devices ..........................................................1881
Robert FRISCHER, Miloš POLLAK, Tomáš TUHÝ, Veronika PRAŽÁKOVÁ
Maintenance Management of Metallurgical Processes ...............................................................................1887
Lucie FRISCHEROVÁ, Jiří DAVID, Romana GARZINOVÁ
Metallurgical Industry Risk Management ....................................................................................................1892
Ryszard GRADZKI, Sebastian BAKALARCZYK, Przemyslaw POMYKALSKI
Utilization of Simulation Software for Supply Chains Resilience Simulation ...............................................1897
Ekaterina GRAKOVA, Emilie KRAUSOVÁ
Stress Risk in Management Systems in Metallurgical Problems ..................................................................1904
Ionela Ramona GUSETORIU, Dumitru TUCU
The Application of Fuzzy FMEA ....................................................................................................................1909
Petra HALFAROVÁ, Tatiana USTYUGOVA, David VYKYDAL
Multi-criteria Decision-Making in Management under Conditions of Risk and Uncertainty .......................1914
Karel CHOBOT
Workers Evaluations of Ribbed Wire Competition and Rolling Mill Technological Possibilities..................1920
Stanislaw BORKOWSKI, Manuela INGALDI
Process Management in the Část Iron Foundry ...........................................................................................1926
Robert ULEWICZ, Jacek SELEJDAK, Stanisław BORKOWSKI, Marta JAGUSIAK-KOCIK
Prediction of Internal Defects in Rolled Products from Cr-Mo Steels using Artificial Intelligence
Methods .......................................................................................................................................................1932
Zora JANČÍKOVÁ, Ondřej ZIMNÝ, Miroslav KVÍČALA, Pavel KOŠTIAL, Roman MECA
Innovations in Czech Metallurgical Plants ....................................................................................................1938
Kamila JANOVSKÁ, Andrea SAMOLEJOVÁ, Jakub GAJDA, Martin LAMPA, Šárka VILAMOVÁ,
Josef KUTÁČ
Economic benefits of raw materials reducibility testing ..............................................................................1944
Simona JURSOVÁ, Jiří BILÍK ..................................................................................................................... 1944
Improvement of Production Planning based on the Application of Principles of MRP ...............................1948
René KLEGA
Ecological Possibilities of Waste Utilization in Metallurgical Processes ......................................................1954
Anna KONSTANCIAK, Pavlína PUSTĚJOVSKÁ
Treatment of Ultra Fine-grained Steels using the STRAD Method...............................................................1960
Petr KOŇAŘÍK, Miroslav OLSZAR
Identification of Bottlenecks in Iron Foundry Production - Case Study .......................................................1965
Nicole KYNCL
Innovative Access to Solution "Two-dimensional" Cutting Problem in Metallurgical Operations ..............1971
Martin LAMPA, Kamila JANOVSKÁ, Petr BESTA
Analysis of Maintenance Data in Terms of Possible Application of SPC ......................................................1977
Marek LEIDOLF, Darja NOSKIEVIČOVÁ
Concept of a System for Resilience Measurement in Industrial Supply Chain.............................................1982
Radim LENORT, Pavel WICHER
The Service Life Calculation of Crane Ropes in Metallurgical Operations....................................................1989
Janka ŠADEROVÁ, Radim LENORT
The Key Strategic Customer Benefits Leading to Strengthening of Relations with Customers
in the Chemical Industry ...............................................................................................................................1994
Hana LOSTAKOVA, Iva STEJSKALOVA
A Deep Dive into Resilience Capabilities as a Result of Supply Chain Efficiency ..........................................2000
Petr NOVOTNY, Martin FOLTA
Barriers to the Development of Cooperation in Value Networks with a Low Level of Cooperation ...........2006
Zuzana PECINOVA, Hana LOSTAKOVA, Lenka BRANSKA
Possibilities of Energetic and Economic Utilization of Waste Mine Gas ......................................................2013
Pavlína PUSTĚJOVSKÁ, Silvie BROŽOVÁ, Edyta KARDAS, Ivan ŠPERLÍN
Performance Management in Metalworking Processes as a Source of Sustainable Development ............2017
Anna SANIUK, Dagmar CAGÁŇOVÁ, Miloš ČAMBÁL
System of Production Flow Planning in Metalworking Clusters...................................................................2023
Sebastian SANIUK
Marketing Innovations in Industrial Firms ...................................................................................................2029
Andrea SIKOROVÁ, Andrea SAMOLEJOVÁ, Martin LAMPA
Condition and Prospects of Innovative Activity in the Steel Industry in Poland ..........................................2036
Arkadiusz SZMAL
Selected Aspects of Marketing Management of Metallurgical Companies .................................................2043
Šárka VILAMOVÁ, Kamila JANOVSKÁ, Roman KOZEL, Petr BESTA, Milan STOCH, Martin ČECH
Inventory Planning and Control of Electrodes for Electric Arc Furnace .......................................................2050
Pavel WICHER, Radim LENORT
Management of Production Orders in Metalworking Production ...............................................................2057
Anna SANIUK, Krzysztof WITKOWSKI, Sebastian SANIUK
Usage of Datamining Methods for Control Support of Crystalizer’s Lifetime ..............................................2063
Martin ZUSKÁČ, Jiří DAVID, Lucie FRISCHEROVÁ, Romana GARZINOVÁ