Articles List Manufacturing Technology | Voume 13 ISSN 1213-2489

Articles List Manufacturing Technology | Voume 13 ISSN 1213-2489

Articles List
Manufacturing Technology | Voume 13
ISSN 1213‐2489
Title
Volume
Year
13
1
The Simulation of Influence of Quenching Temperature on Properties of Bearing Rings
13
1
Complex evaluation of porosity in A356 aluminium alloy using advanced porosity module
13
1
Influence of repeated remelting of the alloy RR.350 on structure and thermo-mechanical properties
13
1
Influence of returning material on porosity of die castings
13
1
13
1
13
1
13
1
13
13
March 2013
Manufacturing Technology
13
13
13
Numb
Article title
er
1
Study of advanced Ni – base ŽS6K alloy by quantitative metallography methods
1
Influencing the crystallization of secondary alloy AlSi6Cu4 with strontium
1
Study of the gas content in aluminum alloys
1
1
Using of Thermal Analysis in the Industrial Practice-Consumption Reduction of Grain-Refinement
Master Alloy and Optimization of Computer Simulation Results
Elimination of the negative effect of Fe-rich intermetallic phases in secondary (recycled) aluminium cast
alloy
Impact Analysis of Mutual Rotation of Roller Bearing Rings on the Process of Contact Stresses in
Rolling Elements
Experimental evaluation of the new lance for powder injection
In-phase multiaxial fatigue experimental analysis of welded cylindrical 6063-T66 aluminium alloy
specimens
Inoculant Addition Effect on Thermomechanical and Thermophysical Properties of Mg-Sr Magnesium
Alloy
13
1
Modified hydrated sodium silicate as a modern binder for ecological moulding sands
13
13
1
1
13
1
13
1
13
13
13
13
13
1
1
1
1
1
13
1
13
1
Squeeze casting results of aluminium alloys
Finite Element Implementation of Multi-Pass Fillet Weld with Phase Changes
Metallurgical and Material Properties of Castings Manufactured from Stainless G-X4CrNi13-4 and GX4CrNiCu13-4
Effect of opening material granularity on the mould properties and the quality of castings made by
patternless process technology
Temperature gradient in cooling down Fe-C-Cr alloy casting
The zone without carbon in alloy layer obtained on steel cast
The role of antimony in modifying of Al-Si-Cu cast alloy
Influence of heat treatment on the microstructure of synthetic nodular část iron
Hardness of Ductile Cast Iron Castings and its Control in Praxis
Assessment of the effect of temperature and annealing time homogenization AlCu4MgMn alloys in terms
of microstructure image analysis methods and EDX
The Efficiency of Different Types of Inoculation of Pure Al and AlSi2 Alloy
13
2
Properties of Briquettes from Paper Waste
13
2
Hard Machinable Machining of Cobalt-based Superalloy
13
2
CRM as a competitive advantage
Author(s)
pages
Juraj Belan
Dana Bolibruchová, Marek Brůna
Dana Bolibruchová, Lukáš Richtárech
Martin Brezničan, Peter Fabian, Jozef Meško, Mário
Drbúl
Marek Brůna, Lukáš Kucharčík, Augustín Sládek
Marek Břuska, Petr Lichý, Michal Cagala, Jaroslav
Beňo
Ľubomír Eperješi, Jozef Malik, Štefan Eperješi, Daniel
Fecko
2-7
7-14
14-20
No. of
article
M201301
M201302
M201303
20-25
M201304
26-30
M201305
31-35
M201306
36-39
M201307
Marko Grzincic, Mile Djurdjevic, Florian Dirnberger
39-43
M201308
Lenka Hurtalová, Eva Tillová
44-50
M201309
Lenka Jakubovičová, Milan Sága, Milan Vaško
50-54
M201310
Jan Jezierski, Krzysztof Janerka
55-59
M201311
Peter Kopas, Milan Sága
59-64
M201312
Petr Lichý, Jaroslav Beňo, Michal Cagala
64-67
M201313
68-73
M201314
73-79
79-85
M201315
M201316
Josef Odehnal, Stanislav Brotánek
85-91
M201317
Richard Pastirčák, Emil Krivoš
92-97
M201318
Andrzej Studnicki, Jan Szajnar
Jan Szajnar, Agnieszka Walasek, Czesław Baron
Eva Tillová, Mária Farkašová, Mária Chalupová
Alan Vaško
Iveta Vasková, Peter Šebek, Igor Muli
98-103
103-108
109-114
115-119
120-122
M201319
M201320
M201321
M201322
M201323
Viktorie Weiss, Ingrid Kvapilova
123-127
M201324
Tomasz Wróbel
127-133
M201325
Milan Brozek
Robert Cep, Adam Janasek, Jana Petru, Lenka
Cepova, Andrej Czan, Jan Valicek
Helena Čierna, Lucia Bárdošová
138-142 M201326
Katarzyna Major-Gabryś, Stanisław M. Dobosz,
Jarosław Jakubski
Iva Nová, Jiří Machuta
Pavol Novák, Jozef Meško, Milan Žmindák
142-147 M201327
147-152 M201328
Articles List
Manufacturing Technology | Voume 13
ISSN 1213‐2489
Volume
Year
Numb
er
Article title
Author(s)
pages
No. of
article
13
2
Nondestructive micromagnetic evaluation of surface damage after grinding
Mária Čilliková, Marián Mičúch, Miroslav
Neslušan, Anna Mičietová
152-157 M201329
13
2
Postprocessing of CL Data in CAD/CAM system Edgecam using the Constructor of
postprocessors
Nadežda Čuboňová
158-164 M201330
13
2
Application of Electron Scanning Microscope in the Analysis of the Structure of Casting NonConformities Aimed at Optimization of Technological Process Parameters
Czajkowska Agnieszka, Kossakowski Paweł,
Wciślik Wiktor, Stasiak-Betlejewska Renata
164-169 M201331
13
2
Increasing the accuracy of the effect of processing materials and cutting tool wear on the
ploughing force values
Andrey Dugin, Alexey Popov
169-173 M201332
13
2
The GIST of Thermal Stresses of Cast Iron Castings
Peter Futáš, Imrich Jelč, Iveta Vasková, Gabriel
Fedorko, Vieroslav Molnár, Peter Kačmáry
173-178 M201333
13
2
Possibilities of prediction of service life of forming tools
13
2
Welding of Normalized Heat Treated Steels S355NL Large Thicknesses by Method FCAW
2
Surface Integrity in Notches Machining
13
June 2013
Manufacturing Technology
Title
Jiří Hrubý, Josef Rentka, Vladimíra
Schindlerová, Lucie Krejčí, Xenie Ševčíková
Marie Kolaříková, Ladislav Kolařík, Karel
Kovanda, Rudolf Hrabina
Jan Madl, Vitezslav Razek, Vaclav Koutny,
Jindrich Kafka
178-181 M201334
181-188 M201335
188-193 M201336
2
Artificial Neural Network Application for Surface Roughness Prediction when Drilling Nickel
Based Alloy
Influence of surface geometry and structure after non-conventional methods of parting on the
following milling operations
Comparison of variables influence on adhesive bonds strength calculations
Anna Mičietová, Miroslav Neslušan, Mária
Čilliková
Miroslav Müller, Petr Valášek
2
Differences at the Surface Roughness by the ELID and Grinding Technology
Martin Novak, Hiroshi Kasuga, Hitoshi Ohmori
13
2
Using of the Virtual Reality Application with the Scanning Device Kinect for Manufacturing
Processes Planning
Jozef Novak-Marcincin, Veronika Fecova, Jozef
Barna, Miroslav Janak, Ludmila Novakova215-219 M201341
Marcincinova
13
2
Selected Experimental Tests of Materials Used in Rapid Prototyping Area
Ludmila Novakova-Marcincinova, Jozef Novak220-226 M201342
Marcincin, Jozef Torok, Jozef Barna
13
13
2
2
13
2
13
13
2
2
Development and applications of a rotating turning tool
Tool Wear and Machinability of Wood-based Materials during Machining Process
The surface quality of materials after cutting by abrasive water jet evaluated by selected
methods
Polyurethane resins filled with inorganic waste particles
Analysis of geometric accuracy of turned workpieces
13
2
13
2
13
13
Ildikó Maňková, Marek Vrabeľ, Pavel Kovac
193-199 M201337
199-204 M201338
205-210 M201339
210-215 M201340
Jozef Pilc, Karol Vasilko
Eva Šebelová, Josef Chladil
226-231 M201343
231-236 M201344
Miroslava Ťavodová
236-241 M201345
Petr Valášek, Miroslav Müller
Karol Vasilko, Zuzana Murčinková
241-247 M201346
247-252 M201347
Articles List
Manufacturing Technology | Voume 13
ISSN 1213‐2489
Volume
Year
Numb
er
Article title
13
3
Influence of chemical composition, form and morphology of surface of NaCl grains on
mechanical properties of water soluble cores
13
3
Production and properties of metal foams from non-ferrous metals alloys
13
3
Study of interactions between molding materials and magnesium alloys melt metal
13
13
13
13
13
3
3
3
3
3
13
3
Offline Programming for Robotic Deburring Process of Aluminium Wheels
Effect of adding iron to the AlSi7Mg0.3 (EN AC 42 100, A356) alloy
Effect of Germanium on Secondary Lead-free Tin Solders
Possibilities of iron elimination in aluminium alloys by vanadium
Prediction of the Porosity of Al Alloys
Using the Design of Experiment Method to Evaluate Quality of Cuts after Cutting Aluminum
Alloy by AWJ
13
3
13
Author(s)
pages
No. of
article
Eliška Adámková, Petr Jelínek, Soňa Študentová 255-261 M201348
Vlasta Bednářová, Petr Lichý, Tomáš Elbel, Ivo
Lána
Jaroslav Beňo, Petr Lichý, Michal Cagala,
Kateřina Konečná, Marek Břuska
Ondrej Bilek, David Samek, Jana Knedlová
Dana Bolibruchová, Lukáš Richtárech
Dana Bolibruchová, Marek Brůna
Dana Bolibruchová, Mária Žihalová
Marek Brůna, Lukáš Kucharčík
261-265 M201349
265-269 M201350
269-275
276-281
281-289
289-296
296-302
M201351
M201352
M201353
M201354
M201355
Helena Čierna, Miroslava Ťavodová
302-307 M201356
Fracture surface of recycled AlSi10Mg cast alloy
Mária Farkašová, Eva Tillová, Mária Chalupová
307-313 M201357
3
Plastic Deformation Properties of Magnesium Alloy AZ61
Ivana Hlaváčová, Peter Palček, Mária Chalupová,
313-319 M201358
Zuzana Dresslerová
13
3
The Influence of Porosity on Mechanical Properties of Casts Produced from Al - Si Alloys
Radek Honzátko, Štefan Michna, Jaromír Cais
319-324 M201359
13
3
Influence of Cutting Tool Material on the Surface Roughness of AlMgSi Aluminium Alloy
Júlia Hricová
324-329 M201360
13
3
Porous Ti-Si Alloys for Implants
Anna Knaislová, Matyáš Peterka, Pavel Novák,
Dalibor Vojtěch
330-333 M201361
13
3
Jiří Kubásek, Dalibor Vojtěch
334-341 M201362
Petr Lichý, Jaroslav Beňo, Michal Cagala
Petr Lukovics
Jan Madl, Ludek Ruzicka, Michal Lattner
341-345 M201363
345-349 M201364
349-353 M201365
3
3
3
Mechanical and corrosion properties of Mg based alloys considered for medical applications as
biodegradable materials
Possibility of affecting the casting structure of magnesium alloys
Evaluation of vibration on technological devices
The Effect of Chemical Elements on the Machinability of Aluminium Alloys
3
Properties of metallic nanocrystalline powders
Ivo Marek, Alena Michalcova, Dalibor Vojtech
353-358 M201366
13
3
Preparation of Metallic Nanoparticles
Alena Michalcová, Dalibor Vojtěch, Ivo Marek,
Petra Svobodová, Radka Nováková
358-361 M201367
13
3
Analysis of Causes of Al2MgO4-Type Spinel Inclusions Formation in Al-Mg Alloys during
Low-Pressure Casting
Štefan Michna, Radek Honzátko, Jaromír Cais
361-368 M201368
13
3
Influence of strontium in AlSi7Mg0.3 alloy on the tool wear
13
3
Modification of AlSi7Mg0.3 alloy by strontium
13
13
13
13
September 2013
Manufacturing Technology
Title
Nataša Náprstková, Jaroslava Svobodová,
368-373 M201369
Jaromír Cais
Nataša Náprstková, Sylvia Kuśmierczak, Jaromír
373-380 M201370
Cais
Articles List
Manufacturing Technology | Voume 13
ISSN 1213‐2489
Title
Volume
Year
Numb
er
Article title
Author(s)
pages
No. of
article
13
3
The Effect of Modification by Strontium of the AlSi7Mg0.3 Alloy on the Surface Roughness
Nataša Náprstková, Jaromír Cais, Jaroslava
Svobodová
380-384 M201371
13
3
Monitoring of the microstructure and mechanical properties of the magnesium alloy used for
steering wheel manufacturing
Iva Nová, Jiří Machuta
385-390 M201372
13
3
Preparation of aluminium-based quasicrystals
Pavel Novák, Milena Voděrová, Robin
Hendrych, Tomáš Kubatík, Alena Michalcová,
Dalibor Vojtěch
390-394 M201373
13
3
Magnesium Alloys for Implants
Pavel Salvetr, Pavel Novák, Dalibor Vojtěch
395-399 M201374
13
3
Coefficient Thermal Expansion of Fe 3Al and FeAl – type iron aluminides
Martin Švec, Pavel Hanus, Věra Vodičková
399-404 M201375
13
3
Research of Corrosion Properties of Al-Si Alloys Antimony Alloyed
Jaroslava Svobodová, Jaromír Cais, Štefan
Michna, Martin Brůha
404-409 M201376
13
3
Corrosion properties of the superelastic shape memory Ni-Ti alloy for medical implants
Dalibor Vojtěch, Jiří Kubásek, Pavel Novák
409-414 M201377
Articles List
Manufacturing Technology | Voume 12
ISSN 1213‐2489
Volume
Year
Numb
er
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
June 2012
Manufacturing Technology
Title
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
13
12
12
13
13
12
13
2-7
No. of
article
M201201
7-12
13-17
M201202
M201203
18-21
M201204
22-26
M201205
27-30
M201206
Kovanda Karel, Holub Lukáš, Kolařík Ladislav, Kolaříková
Marie, Vondrouš Petr
Productivity Investigation within the ERP Systém
Kujawa Anna, Legutko Stanislaw
Laser Machining of Chosen Materials
Lukovics Imrich, Malachova Martina
Impact of technical diagnostics interval on machinery maintenance
Mayer Karel, Pexa Martin, Pavlů Jindřich
Research into the causes cracking of aluminum alloys of Al – Cu during mechanical machining Michna Stefan, Náprstková Nataša
30-33
M201207
34-38
38-42
42-46
47-51
M201208
M201209
M201210
M201211
Vibratory superpolishing of a ti alloy aerospace material with thermally treated recycled glass
media
Abrasive wear effect on Polyethylene, Polyamide 6 and polymeric particle composites
Application of Barkhausen Noise for Analysis of Surface Integrity after Hard Turning
51-55
M201212
55-59
60-65
M201213
M201214
66-70
71-75
M201215
M201216
75-79
80-82
83-86
M201217
M201218
M201219
86-89
93-97
M201220
M201221
97-102
102-105
105-108
M201222
M201223
M201224
Article title
Utilization of Open Source Application in Area of Augmented Reality Assembling Processes
CAM in the Production of Casting Patterns
Study of Deformation Processes after Hard Turning through Acoustic Emission
Experimental verification of abrasive mass flow impact on the technological head acceleration
amplitude
and vibrations frequency in the production system with AWJ technology
GICS for grinding process optimization
Experimental Verification of the Relation between the Surface Roughness and the Type of
Used Tool
Coating
Experimental Verification of FEM Simulation of GMAW Bead on Plate Welding
Author(s)
Barna Josef, Fecova Veronika, Novak-Marcincin Jozef, Torok
Jozef
Bílek Ondřej, Rokyta Luboš, Šimoník Jaroslav
Čilliková Mária, Neslušan Miroslav, Mičietová Anna, Mrázik
Jozef
Fabian Stanislav, Salokyová Štefánia
Holesovsky Frantisek, Naprstkova Natasa, Novak
Martin
Kasina Marek, Vasilko Karol
Application of Progressive Materials for Rapid Prototyping Technology
Design of a Casting Die in CATIA
Processing engineering of large composites structures using low-pressure vacuum infusion
Morgan Mike, Jamal Mikdam, Benjarungroj Paul, Vaughan
Steve
Müller Miroslav, Valášek Petr
Neslušan Miroslav, Rosipal Martin, Kolařík Kamil, Ochodek
Vladislav
Novak Martin
Novak-Marcincin Jozef, Janak Miroslav, NovakovaMarcincinova Ludmila
Novakova-Marcincinova Ludmila, Janak Miroslav
Rokyta Luboš, Bilek Ondřej
Rusnáková Soňa, Žaludek Milan, Bakošová Dana
Two local extremes of cutting speed
The use of magnetic and ultrasonic structuroscopy for inspection of ADI/AGI castings
Vasilko Karol, Macurová Anna
Zuzana Andršová, Břetislav Skrbek
Decomposition of form surfaces for planning of machining
Effect of the processing materials on the ploughing force values
Experimental verification of the frequency spectrum of unwears and wears guidance tube on
the technological head vibrations creation in the production system with AWJ technology
Jozef Beňo, Jozef Stahovec, Peter Ižol, Miroslav Tomáš
Andrey Dugin, Alexey Popov
Stanislav Fabian, Štefánia Salokyová, Patrik Jacko
Surfaces with high precision of roughness after grinding
Increasing of Product Quality Produced by Rapid Prototyping Technology
pages
Articles List
Manufacturing Technology | Voume 12
ISSN 1213‐2489
Temperature stability of the process of production of wax patterns for investment casting
technology model
Gas Metal Rapid Arc Welding Potential
A Study of the Mechanical Properties of Thermally Treated Recycled Glass Media Used in
Vibratory
Mass Finishing
Analysis of welded joint of band-saw blade – influence of annealing process mechanical
properties
Aleš Herman, Marek Česal
108-112
No. of
article
M201225
Zdeněk Hudec
113-118
M201226
Mikdam Jamal, Mike Morgan
119-124
M201227
Daniela Kalincová
125-131
M201228
13
Structure and mechanical properties of Fe-25Al-5Zr and Fe-30Al-5Zr intermetallic alloys
Pavel Kejzlar
131-135
M201229
12
12
12
12
12
12
13
13
13
13
13
13
Dorota Klimecka-Tatar, Stanisław Borkowski
Marek Krynke, Jacek Selejdak, Stanisław Borkowski
János Kundrák, K. Gyáni, I. Deszpoth
Sylvia Kuśmierczak, Jaroslava Svobodová
Jan Madl
Alena Michalcová, Dalibor Vojtěch
136-140
140-144
145-150
151-157
158-166
166-169
M201230
M201231
M201232
M201233
M201234
M201235
12
13
Štefan Michna, Petr Majrich
169-174
M201236
12
13
The effect of chlorhexidine on the colour and tint change of ceramic dental veneer
Diagnosis and damage of bearings
The effect of the borehole diameter on the machining times in hard machining
Microscopic Evaluation of Protective Coating by Coated Sheets after Corrosion Load
Surface Properties in Precise and Hard Machining
Structure of rapidly solidified aluminium alloys
Possible ways of obtaining an aluminium alloy by non--traditional waste processing of
aluminium beverage containers
The use of fractography in the analysis of cracking after formed workpiece blank mechanical
machining from the AlCuSnBi alloy
Štefan Michna, Nataša Náprstková
174-178
M201237
12
13
178-186
M201238
12
13
186-191
M201239
12
13
192-197
M201240
197-201
M201241
Volume
Year
Numb
er
12
13
12
13
12
13
12
13
12
Article title
Author(s)
pages
12
12
12
13
13
13
Ivan Mrkvica, Miroslav Neslušan, Ryszard Konderla, Miroslav
Janoš
Technology of Perspective Scanning Methods for Realization of 3D Models of Manufacturing Jozef Novak-Marcincin, Jozef Torok, Jozef Barna, Ludmila
Devices
Novakova-Marcincinova
G–Ratio in hardened steel grinding with different coolants
Martin Novak, Roman Dolezal
Possibilities of the observation of chemical reactions during the preparation of intermetallics by Pavel Novák, Alena Michalcová, Ivo Marek, Milena
reactive sintering
Voděrová, Dalibor Vojtěch
Microstructure Analysis of Titanium Alloys after Deformation by means of Asymmetric
Incremental
Lucie Novakova, Petr Homola, Vaclav Kafka
Sheet Forming
Model of chip formation during turning in the presence of a built-up edge (BUE)
Zoltán Pálmai
TEM Investigation of Precipitation in Al-Mn Alloys with Addition of Zr
Michaela Poková, Miroslav Cieslar, Jacques Lacaze
Fatigue resistance of dual phase steels in presence of microstructural inhomogeneities
Gejza Rosenberg, Ľuboš Juhár
12
13
Influence of microstructural heterogeneities on capacity to absorb energy of dual-phase steels
Gejza Rosenberg, Iveta Sinaiová, Ľuboš Juhár
222-227
M201246
12
12
13
13
The importance of measured values number in evaluating the wear size of inserts
Gear-Shaper Cutter with Curvilinear Side Flank Face
227-232
233-237
M201247
M201248
12
13
The Roundness and Microstructure of Thin-wall Bearing Rings
Ludek Ruzicka, Jan Madl
Roman Siecla, Stanislaw Legutko
Augustín Sládek, Peter Fabian, Richard Pastirčák, Martin
Brezničan
237-241
M201249
12
13
Value engineering as the way of quality problems solving in the steel construction management Renata Stasiak-Betlejewska
242-247
M201250
12
12
December 2012
Manufacturing Technology
Title
13
13
Cutting ceramic by turning of nickel alloy Inconel
201-206
M201242
207-212
212-217
217-221
M201243
M201244
M201245
Articles List
Manufacturing Technology | Voume 12
ISSN 1213‐2489
Title
Volume
Year
Numb
er
Article title
pages
No. of
article
Elena Střihavková, Viktorie Weiss
248-251
M201251
Oldrich Suba, Libuse Sykorova, Imrich Lukovics
251-254
M201252
Author(s)
12
13
12
13
The Identification of the structures new type Al-Si-Mg Ca alloys with different Ca content
using of the color metallography
Stress Analysis of Injection - moulded Cylindrical Parts Reinforced with Short Fibres
12
13
The effect of heat treatment on the structure of Nb and C doped Fe3Al iron aluminides
Martin Švec, Věra Vodičková, Pavel Hanus
254-259
M201253
12
13
Investigation of the non-uniform temperature distribution on the metallic charge length during
round bars rolling process
Piotr Sygut, Konrad Laber, Stanisław Borkowski
260-263
M201254
12
13
Microscopical Evaluation of Hard Zinc Refining by Aluminium
Jarmila Trpčevská, Blanka Hoľková, Jana Pirošková, Mária
Ferencová
264-267
M201255
12
13
Petr Valášek, Miroslav Müller
268-272
M201256
12
12
12
13
13
13
Petr Valášek, Miroslav Müller
Karol Vasilko
Karol Vasilko, Vladimír Simkulet
272-276
277-281
281-285
M201257
M201258
M201259
12
13
Dalibor Vojtěch, Jiří Kubásek, Milena Voděrová
285-292
M201260
12
13
Study of nano-crystalline metals prepared by selective chemical leaching
Dalibor Vojtěch, Alena Michalcová, Vítězslav Knotek, Ivo
Marek
292-296
M201261
12
13
Influence of the homogenization annealing on microstructure and mechanical properties of
AlZn5,5Mg2,5Cu1,5 alloy
Viktorie Weiss, Elena Strihavkova
297-302
M201262
Influence of bonded abrasive particles size on wear of polymeric particle composites based on
waste
Polymeric particle composites with filler saturated matrix
Effective examination for obtaining relation T=f(vc)
Phenomenon of twist drill
Structural, mechanical and in vitro corrosion characterization of as-cast magnesium based
alloys for temporary biodegradable medical implants
Articles List
Manufacturing Technology | Voume 11
ISSN 1213‐2489
Title
Volume
Year
pages
No. of
article
Borkowski S., Stasiak-Betlejewska R., Náprstková N.
2-5
M201101
Author(s)
11
11
Fatigue life and surface integrity measurements of EN S355J2 steel used in hydraulic components
Čuban J., Calonius O., Pietola M., Jersák J.
5-11
M201102
11
11
Phase and structure characteristics of recycled AlZn10Si8Mg cast alloy
Ďuriníková E., Tillová E.
11-17
M201103
11
11
Analysis of influence of structure on mechanical properties of AlSiMg aluminium alloy processed by ECAP Greger M., Widomská M.
17-22
M201104
11
11
Cavitation erosion resistance of the chosen aluminum alloys
Jasionowski R., Podrez-Radziszewska M., Zasada D.
22-28
M201105
11
Application of magnetic correlation analysis on the choice and correction of cutting parameters for
automated manufacturing systems
Kocman K.
28-32
M201106
11
Alternative machining procedures of hardened steels
Kundrák J.
32-39
M201107
11
Microstructure and Mechanical Properties of the AlSi13Mg1CuNi Alloy With Ecological Modifier
Lipiński T.
40-44
M201108
11
Use Properties of the AlSi9Mg Alloy With Exothermical Modifier
Lipiński T.
44-49
M201109
11
11
Unconventional machining method for enhancing the durability of tools and strength of the specimens
bonded
Makedonski A.
49-55
M201110
11
11
11
11
Surface quality of hardened steels after grinding
Novák M.
55-59
M201111
Weldability problems of the technical AW7020 alloy
Podrez-Radziszewska M.
59-66
M201112
The impact of the cast-iron semi-finished product hardness on the surface quality after the machining
process
Suchánek D., Dušák K.
66-70
M201113
Quality control of microstructure in recycled Al-Si cast alloys
Tillová E., Chalupová M., Hurtalová L., Ďuriníková E.
70-76
M201114
Identification of „natural“ breaker cut during the machining of carbon steels
Vasilko K.
77-84
M201115
11
11
11
11
December 2011
Manufacturing Technology
11
Numb
Article title
er
11 The Kaizen philosophy in the aluminium products improvement
11
11
11
11
11
11