Full programme in PDF format

ENGINEERING MECHANICS 2010
INTERNATIONAL CONFERENCE
MAY 10-13 2010, SVRATKA, CZECH REPUBLIC
PROGRAMME OF THE CONFERENCE
___________________________________________________________________________
Association for Engineering Mechanics
Institute of Solid Mechanics, Mechatronics and Biomechanics,
Faculty of Mechanical Engineering, Technical University of Brno
Institute of Theoretical and Applied Mechanics,
Academy of Sciences of the Czech Republic, v. v. i.
Institute of Thermomechanics,
Academy of Sciences of the Czech Republic, v. v. i.
ŽĎAS, a.s., Žďár nad Sázavou
Czech Society for Mechanics
IFToMM Member Committe of the Czech Republic
2
TABLE OF CONTENTS
1. General Information ..............................................................................
4
2. Scientific Information ...........................................................................
6
3. Conference Timetable ...........................................................................
8
4. Programme of the Presentations ...................................................... 10
4.1. Lecture Hall I
- Detailed Programme .......................................... 11
4.2. Lecture Hall II - Detailed Programme ......................................... 16
4.3. Lecture Hall III - Detailed Programme ......................................... 21
4.4. Lecture Hall IV - Detailed Programme ......................................... 26
4.5. Poster Session
5. Author Index
................................................................................. 28
.......................................................................................... 30
HONORARY COMMITTEE
Miroslav Šabart, MSc
Managing Director of the ŽĎAS, a.s.
Boris Jakubík
Mayor of Svratka
SCIENTIFIC COMMITTEE
chairman: Igor Zolotarev, PhD
IT ASCR, v. v. i., Prague
members:
ITAM ASCR, v. v. i., Prague
ŽĎAS, a.s., Žďár n.S.
ISMMB FME, TU, Brno
IT ASCR, v. v. i., Prague
ISMMB FME, TU, Brno
IT ASCR, v. v. i., Prague
ISMMB FME, TU, Brno
ŽĎAS, a.s., Žďár n.S.
ITAM ASCR, v. v. i., Prague
ITAM ASCR, v. v. i., Prague
UTLS, Poland
IT ASCR, v. v. i., Prague
IT ASCR, v. v. i., Prague
ICARCH SAS, Slovakia
TU, Brno
Prof. Miloš Drdácký, DSc
Michael Formánek, MSc
Vladimír Fuis, PhD.
Jaromír Horáček, DSc
Prof. Přemysl Janíček, DSc
Prof. Zbyněk Jaňour, DSc
Prof. Ctirad Kratochvíl, DSc
Pavel Lamač, MSc
Jiří Minster, DSc
Jiří Náprstek, DSc
Prof. Kazimierz Peszyński, PhD
Prof. Jaromír Příhoda, PhD
Ladislav Půst, DSc
Prof. Alexander Tesár, DSc
Prof. Jan Vrbka, DSc
3
1. GENERAL INFORMATION
VENUE
The EM2010 Conference is held in the hotel ŽĎAS. Address :
Hotel ŽĎAS
592 02 Svratka
Czech Republic
www.hotel-svratka.cz
hotel reception and registration desk:
Tel. : + 420.566 662 611
Fax : +420.566 662 418
e-mail: [email protected]
ACCOMMODATION
Accommodation has been reserved in the hotel ŽĎAS. To serve all the participants, places
in other near facilities have also been reserved, see the map. For information regarding
your individual reservation, please contact kindly the reception of the hotel ŽĎAS
immediately after your arrival at Svratka. Breakfast is served for all participants
(wherever accommodated) in the hotel ŽĎAS only (6,45-8,00 a.m.)
• hotel ŽĎAS
see above
manager: Mr. Fr. Pokorný
mobil: +420.602 705 412
TRANSPORTATION
Transportation from Žďár nad Sázavou to Svratka and back (travel time 30 min.):
• A special coach to Svratka (hotel ŽĎAS - Conference venue) will be leaving Žďár nad
Sázavou (bus station in front of the railway station) at 14.45 on 10 May (Monday) 2010.
• A special coach to Žďár nad Sázavou (bus & railway station) will be leaving Svratka
(hotel ŽĎAS) at 12.00 on 13 May (Thursday) 2010.
A special van with label of the conference will be operating between the hotel
ŽĎAS and hotel Mánes where participants are accommodated during the
whole EM2010 Conference.
A public bus is operating between Žďár nad Sázavou (bus & railway station) and Svratka
(main bus stop at Svratka), fare CZK 36,-. Weekdays:
Žďár nad Sázavou
Svratka
Svratka
Žďár nad Sázavou
6:25
7:10
6:30
7:15
8:00
8:45
6:50
7:35
10:05
10:50
7:10
7:55
11:15
12:00
9:15
10:00
4
13:00
13:45
12:40
13:25
14:25
15:10
13:55
14:40
14:45
15:30
15:50
16:35
16:10 17:20 18:35
16:55 18:04 19:20
17:15
18:00
INTERNET SERVICES
During the whole Conference internet services will be available in the hotel Žďas. Four
PCs will be at disposal to the participants in the hotel lobby, as well as the WIFI coverage
of the whole building.
In the same time, the PCs mentioned above will be able to browse among the EM2010 CD
ROM and to read the full text version of papers.
CONFERENCE REGISTRATION
The Registration Desk of the EM2010 Conference is located in the lobby of the hotel
ŽĎAS. It is open from 12.00 to 19.00 on Monday 10 May 2010, from 7.30 to 18.00 on
Tuesday and from 7.30 to 10.00 on Wednesday and Thursday. Accommodation is provided
by the hotel ŽĎAS reception. For information regarding other hotel ŽĎAS services,
please contact hotel reception (swimming pool, golf concourse, etc.).
BOARDING
Lunches and Dinners are served in the Restaurant of the hotel ŽĎAS (Breakfast 6.45-8.00;
Lunches 12.10- 14.00; Dinners at 19.00). As the capacity of the restaurant is limited it is
recommended to eat in two groups. The visible conference badge is a sign for the staff to
serve you.
REFRESHMENT
Coffee, mineral water and other refreshment are available in the bar of the hotel ŽĎAS
(10.00 – 24.00) and in Night Club (20.00 – 24.00).
BADGES
The participants are kindly requested to wear their badges during the conference to be admitted to scientific sessions, breakfasts, lunches, dinners, transportation and other services.
OFFICIAL LANGUAGE
The official languages of the conference are Czech, Slovak and English. No simultaneous
translation is provided.
INSURANCE
The Conference Committee is not responsible for the health problems of the participants
nor for losses. The visitors from abroad are recommended to take out insurance in the
country of their origin.
5
2. SCIENTIFIC INFORMATION
The ENGINEERING MECHANICS 2010 - National Conference with International Participation continues in the tradition of the fruitful meetings which heave been held in
Svratka for many years.
The Programme Committee chose 84 papers for the presentation (78 lectures and 9
posters) at the conference while the keynote speakers were invited to cover the particular
subjects of the engineering mechanics. All accepted papers are published in Conference
Proceedings consisting of two parts:
• The Book of Extended Abstracts, printed by ProPRINT CZ, s.r.o., including 190 pgs.
• CD ROM containing Full Text version as well as Extended Abstracts of papers. CD
ROM has been made by DISKUS dataservis, s.r.o.
For every corresponding author 5 off-prints of his extended abstracts are available at the
Registration Desk. Feel free to make any arbitrary number of additional copies.
LECTURES
The conference includes the keynote lectures (plenary session) and parallel sessions in the
Lecture Halls (L.H.) I, II, III, IV located in main building of the hotel ŽĎAS. The popular names of these halls, mostly used in the past, are: Conference Room – L.H. I (nextdoor the Restaurant), Coffee Bar – L.H. II (behind the Restaurant), Fitness Centre – L.H.
III (basement, next door the Wine Cellar), Night Club– L.H. IV.
The presentation of a keynote lecture lasts 60 minutes while that one of a normal lecture
25 minutes including the discussion. The Chairmen of scientific sessions are responsible
for keeping the timetable. The presenting authors are kindly asked to contact their Section
Chairman 10 minutes before starting of the session and to check functionality of their presentation.
The data projector (1024*768) with PC and overhead projector are available in all lecture halls as a standard. Videorecorder and slide projector (50 x 50 mm) are at disposal at
request with preference of those who claimed these devices in the Registration Form.
A technician will assist in each of the lecture halls during the whole Conference.
POSTER SESSION
For the poster session the area in TV Club is reserved starting Tuesday 8.00. For every
paper announced for the poster session a particular panel of 1m*1m is reserved. Presenting
authors are entitled to mount their posters since Tuesday 8.00. Some fixing material will be
available at the place and at the registration desk.
All of the posters exhibited at the Conference will be accepted into the competition for
the Prize of the Managing Director of the ŽĎAS Company.
The special committee – under chairmanship of Mr. Ivan Trajteľ, MSc., technical director of the ŽĎAS company – will conclude the assessment of the posters exhibited on
Wednesday at 13.30. The winners of the competition will be announced and awarded on
Wednesday evening at 19.00 before the Conference Dinner. The authors are asked to dismount kindly their posters during Thursday morning at the latest.
6
VARIATIONS
The Scientific Committee is entitled to vary the programme if necessary for scientific or
technical reasons. If a speaker is missing in the planned time the next speakers take the order and the break after that particular session will be longer.
TECHNICAL EXHIBITIONS
The experimental equipments, instruments, hardware and software relating to engineering
mechanics are exposed in the lobby of the hotel ŽĎAS.
MEETING OF THE SCIENTIFIC COMMITTEE
The members of the Scientific Committee are invited to a working meeting (Tuesday 11
May, 12.00 - 14.00, Meeting room). The results of the meeting will be announced at the
plenary session during the Closing Ceremony, on Thursday 13 May 2010 at 11.00.
CONTACT ADDRESS OF THE ENGINEERING MECHANICS 2010
(not during the conference)
Igor Zolotarev, PhD.
Institute of Thermomechanics ASCR, v. v. i.
Dolejškova 5,
182 00 Prague 8
Czech Republic
http://www.engmech.cz
E-mail:
[email protected]
tel.: +420
266 053 149 (I.Zolotarev),
+420
266 053 154 (M.Kajprová)
fax: +420
266 053 149
LIST OF SECTIONS
Section
Abbrevition
Keynote Lectures
KEY
Dynamics
DYN
Thermodynamics
TER
Reliability of Structures
REL
Fluid Mechanics
FLU
Fracture Mechanics
FRA
Mechanics of Solids
SOL
Mechatronics
MCT
Biomechanics
BIO
Poster Session
POS
Lecture Hall
Lecture Hall I – Conference Room
Lecture Hall I – Conference Room
Lecture Hall II – Coffee Bar
Lecture Hall III – Fitness Centre
Lecture Hall IV – Night Club
TV Club
7
3. CONFERENCE TIMETABLE
M o n d a y – 10 May 2010
Hotel lobby
12:00 - 19:00
Registration of participants
Plenary session – Lecture Hall I
16:00 - 16:30
Opening ceremony
16:30 - 18:00
Keynote lectures
19:00
D i n n e r - Restaurant
T u e s d a y - 11 May 2010
Parallel
sessions
Lecture Hall
Lecture Hall
Lecture Hall
Lecture Hall
I
II
III
IV
8:00 - 9:40
DYN
FLU
SOL
Coffee Break
MEETING OF THE IFToMM COMMITTEE
Opening of the Poster Session (TV Room)
9:40 - 10:40
Parallel
sessions
Lecture Hall
Lecture Hall
Lecture Hall
Lecture Hall
I
II
III
IV
10:40 - 11:55
DYN
FLU
SOL
L u n c h - Restaurant
MEETING OF THE SCIENTIFIC COMMITTEE
12:00 - 14:00
Parallel
sessions
Lecture Hall
Lecture Hall
Lecture Hall
Lecture Hall
I
II
III
IV
14:00 - 15:40
DYN
FLU
SOL
BIO
15:40 - 16:25
Coffee Break
Parallel
sessions
Lecture Hall
Lecture Hall
Lecture Hall
Lecture Hall
I
II
III
IV
16:25 - 18:05
DYN
FLU
SOL
BIO
19:00
19:30
D i n n e r - Restaurant
Lecture Hall I
Stanislav Růžička, Ing. Miloslav Sláma: Horem, dolem okolo Svratky
8
W e d n e s d a y – 12 May 2010
Parallel
sessions
8:00 - 9:40
Lecture Hall
Lecture Hall
Lecture Hall
Lecture Hall
I
II
III
IV
DYN
FLU
SOL
9:40 - 10:25
Parallel
sessions
10:25 - 12:05
Coffee Break
Lecture Hall
Lecture Hall
Lecture Hall
Lecture Hall
I
II
III
IV
TER
FLU
SOL
12:05 - 14:00
L u n c h - Restaurant
14:00 - 19:00
Free time
19:00
19:00 - 24:00
Announcement of the Poster Session winner
C o n f e r e n c e D i n n e r - Restaurant
T h u r s d a y - 13 May 2010
Parallel sessions
9:00 - 10:15
11:00 - 12:00
Lecture Hall
Lecture Hall
Lecture Hall
Lecture Hall
I
II
III
IV
REL
FRA
MCT
Closing ceremony & L u n c h - Restaurant
9
4. PROGRAMME OF THE PRESENTATIONS
Monday – 10 May 2010 – Restaurant
16:00 –16:30
Opening Ceremony – Plenary session
16:30 - 18:30
Keynote lectures – Plenary session
chairmen:
(KEY)
Jaňour Z. & Vlasák P.
16:30
Okrouhlík M.:
Activities of the Czech Society for Mechanics
16:45
Náprstek J., Fischer C.:
3
Dynamic stability and post-critical processes of pendulum related autoparametric systems
19:00
D i n n e r - Restaurant
10
4.1. Lecture Hall I
(Conference Room – next-door the Restaurant)
Detailed Programme
Dynamics
(DYN)
Thermodynamics
(TER)
Reliability of Structures
(REL)
11
Tuesday – 11 May 2010 – Lecture Hall I
8:00 – 9:40
Dynamics
chairmen:
(DYN)
Náprstek J. & Zeman V.
Čečrdle J.:
Assessment of aileron tab installation influence to ultra-light
aircraft flutter characteristics
17
8:25
Dupal J., Kuruc T.:
Modelling of the turbine generators
23
8:50
Fischer C., Náprstek J.:
Some properties of non-linear resonance of the pendulum damper
33
Hortel M., Škuderová A.:
To the time heteronymous damping in a non-linear parametric
planetary systems
45
8:00
9:15
9:40 – 10:40
Coffee Break – hotel lobby
10:40 –11:55 Dynamics
chairmen:
(DYN)
Náprstek J. & Zeman V.
Kellner J., Zeman V., Šašek J.:
Modelling of bladed disk with damping effects in slip
surfaces of shroud
59
11:05
Kozánek J.:
State space formulations of dynamical problems
71
11:30
Král J.:
Wind response monitoring on buildings
73
12:00 –14:00
L u n c h - Restaurant
10:40
12
Tuesday – 11 May 2010 – Lecture Hall I
14:00 –15:40
Dynamics
14:00
Pařík P.:
Performance analysis of a sparse direct solver implementation
14:25
14:50
15:15
chairmen:
(DYN)
Půst L. & Stein J.
Pečínka L., Malý J., Procházková D., Šimůnek P.:
Experimentally verification of the seismic wave attenuation
excited by the heavy load drop
101
Polach P., Hajžman M., Jankovec J.:
The application of computer simulations at the american bus design
107
Pospíšil S., Fischer C., Náprstek J.:
Experimental and theoretical stability analysis of damped
auto-parametric pendulum
111
15:40 –16:25
Coffee Break – hotel lobby
16:25 –18:05
Dynamics
16:25
16:50
17:15
17:40
19:00
99
chairmen:
(DYN)
Půst L. & Stein J.
Půst L., Radolfová A.:
Vibration and stability of electro-mechanical system with
limited source of energy
115
Siegl J., Švígler J.:
Dynamics of a railway vehicle with two bogies along direct
waved railway
131
Sivčák M., Škoda J.:
Radial correction coefficients of gyroscopic stabilizer applications
133
Stein J., Múčka P.:
Linear planar model of sitting human body subjected
to vibration in two axes
143
D i n n e r - Restaurant
13
Wednesday – 12 May 2010 – Lecture Hall I
8:00 – 9:40
8:00
8:25
8:50
Dynamics
chairmen:
(DYN)
Horáček J. & Jaňour Z.
Tůma J., Šimek J., Škuta J., Los J., Klečka R.:
Active vibration control of journal bearings to preventing
instability caused by an oil film
157
Zeman V., Hlaváč Z.:
Modelling and modal properties of a four-axle locomotive
171
Kolman R., Plešek J., Okrouhlík M., Gabriel D.:
Analysis of classical and spectral finite element spatial
discretization in one-dimensional elastic wave propagation
65
9:15
9:40 – 10:25
Coffee Break – hotel lobby
10:25 –12:05
Thermodynamics
10:25
10:50
chairmen:
(TER)
Horáček J. & Jaňour Z.
Bayer Z.:
11
The alternative thermodynamic analysis of thermal cycles for internal
combustion engines: generalized definition of heat supply
Écsi L., Élesztős P.:
25
The latest advances in implementation and solution of fully coupled
thermal-structural problems using the finite element method – 64 bit verson
of the code
11:15
Hlaváček P., Šmilauer V.:
Model of ion transport in alkali-activated materials
11:40
Slabáková J., Pohanka M.:
135
Cooling efficiency of flat jet nozzles versus full cone nozzles on working roll
12:05 –14:00
L u n c h - Restaurant
14
41
Thursday – 13 May 2010 – Lecture Hall I
9:00 – 10:15
9:00
9:25
Reliability of Structures
chairmen:
(REL)
Hortel M. & Horáček J.
Hanuš V., Štemberk P.:
Welded reinforcement grids and their applicability
in czech environment
37
Králik J., Hukel D.:
75
Nonlinear analysis of the interaction of the steel liner and reinforced
concrete wall of the bubbler tower due to extreme pressure and temperature
9:50
Kruml T., Hutař P., Náhlík L., Seitl S., Polák J.:
Kinetics of fatigue crack growth in eurofer 97 steel
11:00
Closing Ceremony & L u n c h - Restaurant
15
81
4.2. Lecture Hall II
(Coffee Bar)
Detailed Programme
Fluid Mechanics
(FLU)
Fracture Mechanics
(FRA)
16
Tuesday – 11 May 2010 – Lecture Hall II
8:00 – 9:40
Fluid Mechanics
8:00
Bednář L., Tajč L.:
Dynamical stress of beam control system for steam turbines
8:25
chairmen:
(FLU)
Vlasák P.& Tesař V.
13
Filip P., Švrčinová P.:
31
Choice of polymer samples geometry for measurement of elongational
viscosity using ser universal testing platform
Gronát P.:
High-quality vector field and direct vorticity estimation using
the affine correlation method
35
9:15
Hoznedl M., Bednář L., Tajč L.:
Effect of end wall shaping on steam turbine stage efficiency
47
9:40 – 10:40
Coffee Break – hotel lobby
8:50
10:40 –11:55 Fluid Mechanics
chairmen:
Vlasák P.& Tesař V.
10:40
11:05
11:30
12:00 –14:00
(FLU)
Ivanova I. S., Vlasák P., Chára Z., Kysela B.:
Approximation of velocity distribution in open channel flow
55
Kharlamov A. A., Filip P.:
A note to the simplification in description of some molecular-based
polymer models
61
Knotek S., Jícha M.:
On the solution of laminar flow instability using orr-sommerfeld
equation
63
L u n c h - Restaurant
17
Tuesday – 15 May 2010 – Lecture Hall II
14:00 –15:40
14:00
14:25
14:50
15:15
Fluid Mechanics
chairmen:
(FLU)
Uruba V. & Peszyński K.
Kvapil J., Pohanka M.:
Water impact measurement of two overlapping high pressure flat
jet nozzles using two different methods
89
Lukerchenko N., Keita I., Chára Z., Vlasák P.:
Experimental investigation of drag force, Magnus force and drag
torque acting on rough sphere moving in calm water
93
Procházka P., Meyer K. E.:
Investigation of flow structures in a cylindrical cavity using
time-resolved piv and pod analysis
113
Rohan E., Cimrman R.:
Modeling flow of porous medium with coulomb friction
on walls of ducts
119
15:40 –16:25
Coffee Break – hotel lobby
16:25 –18:05
Fluid Mechanics
chairmen:
(FLU)
Uruba V. & Peszyński K.
Rohan E., Lukeš V.:
Modeling of fluid diffusion in layers with double porosity
using homogenization
121
16:50
Schuster M.:
External aerodynamics of rail vehicles
129
17:15
Švrčinová P., Lubasová D., Filip P., Martinová M.:
On behaviour of PVB solutions in electrospinning
149
17:40
Bittner K.:
COMSOL Multiphysics - nastroj pro FEM analyzu
19:00
D i n n e r - Restaurant
16:25
18
Wednesday – 12 May 2010 – Lecture Hall II
8:00 – 9:40
8:00
8:25
8:50
9:15
Fluid Mechanics
chairmen:
Tesař V., Něnička V.:
Processing flow visualisation records by correlation coefficient
evaluation in sub-images
153
Tesař V., Peszyński K.:
Experimental investigations of a very long range infrasonic
annular synthetic-jet
155
Uruba V.:
A new method for vector fields dynamic analysis
159
Vlasák P., Chára Z.:
Effect of dense slurry composition on its flow behaviour
in horizontal pipe
165
9:40 – 10:25
Coffee Break – hotel lobby
10:25 –12:05
Fluid Mechanics
10:25
10:50
(FLU)
Jonáš P. & Chára Z.
chairmen:
(FLU)
Jonáš P. & Chára Z.
Vlček V., Kozánek J.:
Preliminary interferometry measurements of flow field
around a fluttering NACA0015 profile
167
Volavý J., Forman M., Jícha M.:
Subgrid modeling in large eddy simulation
169
11:15
11:40
12:05 –14:00
L u n c h - Restaurant
19
Thursday – 13 May 2010 – Lecture Hall II
9:00 – 10:15
9:00
9:25
9:50
11:00
Fracture Mechanics
chairmen:
(FRA)
Zolotarev I. & Kozánek J.
Pail T., Štafa M., Šimonová H., Frantík P., Keršner Z.:
Fracture parameters of natural and artificial sandstone: experiment
vs. numerical model
97
Růžička J., Jurenka J.:
Simulation of crack propagation in steam turbine blade lock
125
Štafa M., Frantík P.:
Model for high precision approximation of load–deflection
diagrams
145
Closing Ceremony & L u n c h - Restaurant
20
4.3. Lecture Hall III
(TV Club)
Detailed Programme
Mechanics of Solids
(FRA)
Mechatronics
(MCT)
21
Tuesday – 11 May 2010 – Lecture Hall III
8:00 – 9:40
8:00
8:25
8:50
9:15
9:40 – 10:40
Mechanics of Solids
chairmen:
(SOL)
Tesár A. & Fiala Z.
Civín A., Vlk M.:
New information about incremental strain method used for residual
stress measurement by ring-core method
15
Eisner I., Lizoň I., Žmindák M.:
Substructures and macroelements creation in the design of the
Composite layered elements
27
Fiala Z.:
Logarithmic strain in 1 versus 3(2) dimensions
29
Havlásek P., Jirásek M.:
Approximation of the compliance function based on continuous
retardation spectrum
39
Coffee Break – hotel lobby
10:40 –11:55 Mechanics of Solids
chairmen:
Tesár A. & Fiala Z.
(SOL)
Holý S., Hrubý Z., Pečínka L.:
Modelling of transient processes at pressure pipes in the
Abaqus FE-code
43
11:05
Hůlka J., Kubík P., Petruška P.:
Calibration of four fracture models and ductile fracture
simulation possibility
51
11:30
Iván L., Dymáček P.:
Parametric study of the small punch test
53
12:00 –14:00
L u n c h - Restaurant
10:40
22
Tuesday – 11 May 2010 – Lecture Hall III
14:00 –15:40
Mechanics of Solids
chairmen:
(SOL)
Petruška J. & Kozánek J.
Kopačka J., Gabriel D., Plešek J., Ulbin M.:
Application of methods for unconstrained optimization
in computation of normal contact vector
67
Koudelka P.:
Process of lateral passive pressure acting in a sandy mass
69
Králik J., Králik J.jr.:
Comparison of the wind loads influences to the steel chimneys
in accordance of standard STN and ENV
77
15:15
Krybus D., Patzák B.:
Development of EDT generator
83
15:40 –16:25
Coffee Break – hotel lobby
16:25 –18:05
Mechanics of Solids
16:25
Kuběna I., Kruml T.:
Nanocompression of oriented pillars from Al thin film
87
Lasota T., Skácel P., Burša J.:
Factors influencing the accuracy of the measured stress-strain
curves of elastomers
91
14:00
14:25
14:50
16:50
chairmen:
(SOL)
Petruška J. & Kozánek J.
17:15
Nesládek M., Španiel M.:
95
Influence of deformation upon function of valve-guide-seat assemblage
17:40
Plášek J., Kytýr J., Gratza R.:
The ring stiffness simulation of the corrugation pipe
19:00
D i n n e r - Restaurant
23
103
Wednesday – 12 May 2010 – Lecture Hall III
8:00 – 9:40
Mechanics of Solids
8:00
Sládek J., Sládek V., Staňák P., Zhang Ch.:
Meshless local integral equation method for laminated plates
137
Sobotka J.:
On application of generalized functions to calculations
of thin-walled beams
139
Valtrová M., Lepš M.:
Genetic programming approximation in cement paste
experimental performance
161
8:25
8:50
chairmen:
(SOL)
Kratochvíl C. & Náprstek J.
9:15
9:40 – 10:25
Coffee Break – hotel lobby
10:25 –12:05
Mechanics of Solids
10:25
10:50
chairmen:
(SOL)
Kratochvíl C. & Náprstek J.
Rypl D., Patzák B.:
Experiences with the isogeometric analysis
in the structural mechanics
127
Svoboda B.:
Posouzení stability svahu nad starou hornickou činností s ohledem
na provádění trhacích prací na lokalitě Vlastějovice
CD
11:15
11:40
12:05 –14:00
L u n c h - Restaurant
24
Thursday – 13 May 2010 – Lecture Hall III
9:00 – 10:15
Mechatronics
9:00
Kalous J., Biolek D., Kolka Z.:
Project of a program for symbolic analyses of mechatronic drives
57
9:25
Pochylý A., Kubela T., Singule V.:
Force-torque control of industrial robots for industrial applications
105
chairmen:
(MCT)
Kratochvíl C. & Náprstek J.
9:50
11:00
Closing Ceremony & L u n c h - Restaurant
25
4.4. Lecture Hall IV
(Night Club)
Detailed Programme
Biomechanics
(BIO)
26
Tuesday – 11 May 2010 – Lecture Hall IV
14:00 –15:40
Biomechanics
14:00
Čulík J., Szabó Z., Krupička R.:
Human downfall simulation
19
Děťák M., Burša J.:
Pulse wave velocity propagation in arteries and use for diagnostics
of abdominal aortic aneurysm
21
14:25
14:50
15:15
chairmen:
Křen J., Ondoková L., Matějka J., Koudela K., Koudela K.jr.:
85
Treatment of extra-articular fracture following total knee arthroplasty
Polzer S., Burša J.:
Model simplification and boundary conditions of abdominal
aortic aneurysm
15:40 –16:25
Coffee Break – hotel lobby
16:25 –18:05
Biomechanics
16:25
16:50
17:15
17:40
19:00
(BIO)
Rosenberg J. & Křen J.
chairmen:
109
(BIO)
Rosenberg J. & Křen J.
Radolf V., Vampola T.:
1D modeling of the influence of velopharyngeal insufficiency
on phonation of vowels
117
Rosenberg J., Svobodová M.:
Simple model of the smooth muscle isotonic contraction
as a dynamical system
123
Švancara P., Horáček J., Hrůza V.:
FE model of the human vocal folds considering fluidstructure interaction
147
Tesár A., Nasch L.:
Multi-functioning in biomechanics of laminated wood vs carbon
fiber composites
151
D i n n e r - Restaurant
27
4.6. TV Club
Poster Session
(POS)
Note:
All of the posters exhibited at the Conference will be accepted into the competition
for the Prize of the Managing Director of the ŽĎAS Company. The special
committee – under chairmanship of Mr. Ivan Trajteľ, MSc., technical director of
the ŽĎAS company – will conclude the assessment of the posters exhibited on
Wednesday at 13:30.
28
11 – 12 May 2010 – TV Club
Poster Session: Tuesday 8.00 - Wednesday 18.00
chairmen:
(POS)
Formánek M. & Zolotarev I.
1
Antoš P., Jonáš P., Mazur O., Uruba V.:
Measurement of the molar concentration in air-carbon dioxide
mixture by means of hot-wire anemometry
9
2
Hrubý Z., Plešek J., Tin S.:
49
Finite element investigation of the elastic-plastic response underneath
various indentors and its application in Ni-based alloys indentation processes
3
Stárek M., Iván L.:
Ansys for academic users
4
Krejsa J., Zezula M., Věchet S.:
79
Experimental determination of human arm force/elbow joint angle relation
5
Ripel T., Krejsa J., Věchet S.:
Low cost mobile robot position tracking using extended and unscented Kalman
filters
6
Věchet S., Krejsa J.:
Bayesian based localization of mobile robot via bearing only beacons
7
Prokeš M.:
Mechatronic drives - new stage of drives of the company ŽĎAS
8
Jonáš J., Pokorný Z., Ficek F.:
XRK 2-180 straightener modernization
9
Veselý P., Ficek F.:
Stacking of bars to create square and hexagonal bundles
141
29
163
Author Index (in the Book of Extended Abstracts)
A
Antoš P.
H
9
Hajžman M.
Hanuš V.
Havlásek P.
Hlaváč Z.
Hlaváček P.
Holý S.
Hortel M.
Horáček J.
Hoznedl M.
Hrubý Z.
Hrůza V.
Hukel D.
Hutař P.
Hůlka J.
B
Bayer Z.
Bednář L.
Biolek D.
Burša J.
11
13,47
57
21,91,109
C
Cimrman R.
Civín A.
Čečrdle J.
Čulík J.
119
15
17
19
D
Dupal J.
Dymáček P.
Děťák M.
Ch
23
53
21
Chára Z.
Ivanova I. S.
Iván L.
27
25
25
Jankovec J.
Jirásek M.
Jonáš P.
Jurenka J.
Jícha M.
29
31,61,149
33,3,111
169
97,145
107
39
9
125
63,169
K
Kalous J.
Keita I.
Kellner J.
Keršner Z.
Kharlamov A. A.
G
Gabriel D.
Gratza R.
Gronát P.
55
53,141
J
F
Fiala Z.
Filip P.
Fischer C.
Forman M.
Frantík P.
55,93,165
I
E
Eisner I.
Écsi L.
Élesztős P.
107
37
39
171
41
43
45
147
47
43,49
147
75
81
51
65,67
103
35
30
57
93
59
97
61
Klečka R.
Knotek S.
Kolka Z.
Kolman R.
Kopačka J.
Koudela K.
Koudela K.jr.
Koudelka P.
Kozánek J.
Krejsa J.
Kruml T.
Krupička R.
Krybus D.
Král J.
Králik J.
Králik J.jr.
Kubela T.
Kubík P.
Kuběna I.
Kuruc T.
Kvapil J.
Kysela B.
Kytýr J.
Křen J.
157
63
57
65
67
85
85
69
71,167
79,163
81,87
19
83
73
75,77
77
105
51
87
23
89
55
103
85
N
Nasch L.
Nesládek M.
Náhlík L.
Náprstek J.
Něnička V.
O
Okrouhlík M.
Ondoková L.
Pail T.
Patzák B.
Pařík P.
Peszyński K.
Petruška P.
Pečínka L.
Plešek J.
Plášek J.
Pochylý A.
Pohanka M.
Polach P.
Polzer S.
Polák J.
Pospíšil S.
Procházka P.
Procházková D.
Půst L.
91
161
27
157
149
93
121
97
83,127
99
155
51
43,101
49,65,67
103
105
89,135
107
109
81
111
113
101
115
R
Radolf V.
Radolfová A.
Rohan E.
Rosenberg J.
Rypl D.
Růžička J.
M
Malý J.
Martinová M.
Matějka J.
Mazur O.
Meyer K. E.
Múčka P.
65
85
P
L
Lasota T.
Lepš M.
Lizoň I.
Los J.
Lubasová D.
Lukerchenko N.
Lukeš V.
151
95
81
33,3,111
153
101
149
85
9
113
143
117
115
119,121
123
127
125
S
Schuster M.
31
129
Seitl S.
Siegl J.
Singule V.
Sivčák M.
Skácel P.
Slabáková J.
Sládek J.
Sládek V.
Sobotka J.
Staňák P.
Stein J.
Stárek M.
Svobodová M.
Szabó Z.
Šašek J.
Šimek J.
Šimonová H.
Šimůnek P.
Škoda J.
Škuderová A.
Škuta J.
Šmilauer V.
Španiel M.
Štafa M.
Štemberk P.
Švancara P.
Švrčinová P.
Švígler J.
81
131
105
133
91
135
137
137
139
137
143
141
123
19
59
157
97
101
133
45
157
41
95
97,145
37
147
31,149
131
V
Valtrová M.
Vampola T.
Vlasák P.
Vlk M.
Vlček V.
Volavý J.
Věchet S.
Z
Zeman V.
Zezula M.
Zhang Ch.
Žmindák M.
T
Tajč L.
Tesar A.
Tesař V.
Tin S.
Tůma J.
13,47
151
153,155
49
157
U
Ulbin M.
Uruba V.
161
117
55,93,165
15
167
169
79,163
67
9,159
32
59,171
79
137
27