15MI100

Transkript

15MI100
15MI100
MID FREQUENCY TRANSDUCER
MI100 Series
www.beyma.com
KEY FEATURES
●
●
●
●
●
●
Very high efficiency (4,3%)
High sensitivity: 100 dB (1W / 1m)
FEA optimized magnetic circuit.
Extremely linear frequency response.
Low harmonic distortion.
Large magnetic assembly to provide efficient heat
dissipation.
● Designed for high quality mid-frequency reproduction.
DIMENSION DRAWINGS
TECHNICAL SPECIFICATIONS
Nominal diameter
Rated impedance
Minimum impedance
Power capacity*
Program power
Sensitivity
Frequency range
Voice coil diameter
Bl factor
Moving mass
Voice coil length
Air gap height
Xdamage (peak to peak)
380 mm
15 in
8Ω
6,6 Ω
450 WAES
900 W
100 dB 1W @ 1m @ ZN
40 - 5.000 Hz
77 mm
3 in
19,2 N/A
0,077 kg
13,7 mm
10 mm
24 mm
MOUNTING INFORMATION
THIELE-SMALL PARAMETERS**
Resonant frequency, fs
D.C. Voice coil resistance, Re
Mechanical Quality Factor, Qms
Electrical Quality Factor, Qes
Total Quality Factor, Qts
Equivalent Air Volume to Cms, Vas
Mechanical Compliance, Cms
Mechanical Resistance, Rms
Efficiency, η0
Effective Surface Area, Sd
Maximum Displacement, Xmax ***
Displacement Volume, Vd
Voice Coil Inductance, Le @ 1 kHz
37 Hz
6,2 Ω
6,3
0,30
0,29
264 l
240 µm / N
2,8 kg / s
4,3 %
0,088 m2
4,5 mm
396 cm3
1 mH
Overall diameter
Bolt circle diameter
Baffle cutout diameter:
- Front mount
Depth
Volume displaced by driver
Net weight
Shipping weight
388 mm
370 mm
15,28 in
14,57 in
352 mm
163 mm
7l
7,8 kg
8,6 kg
13,86 in
6,42 in
0,25 ft3
17,2 lb
18,9 lb
Notes:
* The power capaticty is determined according to AES2-1984 (r2003) standard. Program
power is defined as the transducer’s ability to handle normal music program material.
** T-S parameters are measured after an exercise period using a preconditioning power test.
The measurements are carried out with a velocity-current laser transducer and will reflect the
long term parameters (once the loudspeaker has been working for a short period of time).
*** The Xmax is calculated as (Lvc - Hag)/2 + (Hag/3,5), where Lvc is the voice coil length and
Hag is the air gap height.
15MI100
MID FREQUENCY TRANSDUCER
MI100 Series
LOW & MID FREQUENCY TRANSDUCER
www.beyma.com
[Ω]
FREE AIR IMPEDANCE CURVE
[Hz]
[dB]
FREQUENCY RESPONSE AND DISTORTION
[Hz]
Note: On axis frequency response measured with loudspeaker
standing on infinite baffle in anechoic chamber, 1W @ 1m
07/14
Polígono Industrial Moncada II ▪ C/. Pont Sec, 1c ▪ 46113 MONCADA - Valencia (Spain)
▪ Tel.: (34) 96 130 13 75 ▪ Fax: (34) 96 130 15 07 ▪ http://www.beyma.com ▪ E-mail: [email protected]

Podobné dokumenty

18SW1600ND definitive 11_06_09.p65

18SW1600ND definitive 11_06_09.p65 *The power capacity is determined according to AES2-1984 (r2003) standard. Program power is defined as the transducer’s ability to handle normal music program material. **T-S parameters are measure...

Více

KD1206PHS2

KD1206PHS2 requested in advance. 3. Please do not touch the impeller with pressure and never bring the fan with lead wire. The bearings and lead wire may be damaged. 4. No guarantee on the products against th...

Více

80.ceník FALCON CZECH Mannol 2015.xlsx

80.ceník FALCON CZECH Mannol 2015.xlsx ATF MULTIVEHICLE Aisin Warner JWS 3309; JASO M315 Type 1A; Mazda ATF D-III/M-3 Jatco ATF;Toyota ATF Type T/T-II/T-III/T-IV;Nissan/Infiniti Matic Fluid C/D/J Hyundai/Kia; Mitsubishi Diamond SP-II/SP...

Více