Pulling Eye Guide

Pulling Eye Guide
How to remove protection from the pulling eye protection
Dear customer,
Thank you for your interest in our product line. We prepared this guide to make
the installation of our pulling eye even easier.
The pulling eye looks like the one on picture above after it was taken out
from plastic bag and all cable ties were cut.
You are going to take the
protective tube off.
We recommend to begin from this
end of cable.
Fibre Professionals s.r.o.
U Druhé baterie 19/783, Praha 6 - Støešovice, 162 00, Èeská republika
tel.: +420 224 313 546 (678), fax: +420 224 315 559
e-mail: [email protected]
Pulling Eye Guide
How to remove protection from the pulling eye protection
1.
Remove the plastic cover
2.
Unscrew bolted assembly
3. Remove the buckle. If you
have troubles with it just loosen the
cable by unscrewing grommet on
the opposite side of the protective
tube
Fibre Professionals s.r.o.
U Druhé baterie 19/783, Praha 6 - Støešovice, 162 00, Èeská republika
tel.: +420 224 313 546 (678), fax: +420 224 315 559
e-mail: [email protected]
Pulling Eye Guide
How to remove protection from the pulling eye protection
4. Simply disunite
protective tube and the
grommet. Now the cable is
free and you can easily pull
it out from the protective
tube. You should also
remove the protective tube
from the other end of the
cable
5. At the end you will get normal distribution cable with a long Kevlar
tale which could be easily cut off.
We hope this guide was hopeful for you and saved your time during
the installation.
Truly yours,
Sylex, s.r.o.
Fibre Professionals s.r.o.
U Druhé baterie 19/783, Praha 6 - Støešovice, 162 00, Èeská republika
tel.: +420 224 313 546 (678), fax: +420 224 315 559
e-mail: [email protected]