here

International conference
POLYMER COMPOSITES
2013
May 28 – 29, 2013
Pilsen, Czech Republic
INVITATION AND PROGRAMME
Exclusive media partner
CZECH TECHNOLOGY PLATFORM
- AEROSPACE
SYNPO a.s.
SUB BRANCH MECHANICS OF COMPOSITE MATERIALS AND
STRUCTURES OF CZECH MECHANICS SOCIETY PRAHA
PYRGOS, spol. s r. o.
AGENTURE FOR TECHNOLOGIE TRANSFER, INNOVATION,
APPLICATION OF SCIENCE AND RESEARCH
AND KNOWLEDGE ECONOMY
EUROPEAN UNION
EUROPEAN REGIONAL DEFELOPMENT FUND
INVESTMENT IN YOUR FUTURE
International conference
POLYMER COMPOSITES 2013
May 28 - 29, 2013
Pilsen, Czech Republic
Teslova 3, Plzeň Science and Technology Park
ORGANIZATION AND PROGRAMME COMMITTEE:
Committee members:
Petr Martinec, New Technology – Research Centre,
University of West Bohemia in Pilsen
Bronislav Foller, New Technology – Research Centre,
University of West Bohemia in Pilsen
Petra Pechmanová, New Technology – Research,
University of West Bohemia in Pilsen
Eva Nezbedová, Polymer Institute Brno
František Socha, SYNPO, a.s., Pardubice
Vilém Pompe, Aeronautical Research and Test Institute, Prague
Josef Křena, LETOV LETECKÁ VÝROBA, Ltd. Prague
Petr Štrunc, STTA Ltd., Pilsen
Tomáš Kovářík, New Technology – Research Centre,
University of West Bohemia in Pilsen
Jan Orlt, consultant – composites, Prague
Conference secretariat address:
Petra Pechmanová
New Technology-Research Centre
University of West Bohemia in Pilsen
Univerzitní 8, 306 14 Plzeň
Telefon: +420 377 634 736
Fax:
+420 377 634 702
E-mail: [email protected]
http://
www.zcu.cz/ntc.zcu.cz
The aim of the Conference is to enable specialists from research and
industry to present actual knowledge and trends in research and
development, analyses, materials, technology, manufacturing and
applications of composite materials.
CONFERENCE PROGRAMME
Tuesday, May 28, 2013
8:00 – 9:30
9:30
Registration, exhibition area set-up
Opening and welcome
PLENARY LECTURES
Composite nanofibres
Grégr J., Košťáková E., Technical University Liberec, Czech Republic
Wind energy composites: Development and use of resins, gelcoats
and adhesives
Van Buren A., Ashland Performance Materials, Kehl, Germany
11:15 – 11:30 C o f f e e b r e a k
11:30 – 13:00 Section ANALYSIS AND DESIGN
Chairmen: Josef Křena, Jaroslav Padovec
Debonding and buckling of filament wound vessel above saddle support
Padovec J., Consulting, Strength of plastic and composite structures, Prague, Czech Republic
A method of source functions for micromechanical analysis of composite
materials reinforced by unidirectional fibres with large aspect ratio
Žmindák M., Pelagič Z., Faculty of Mechanical Engineering, Dept. of Applied Mechanics, Žilina,
Slovakia
Experimental verification and numerical model for fatigue properties of some
composite materials
Král M., Aeronautical Research and Test Institute, Prague, Czech Republic
Finite element analysis of wave propagation in composite tubes
Pelagič Z., Žmindák M., Faculty of Mechanical Engineering, Dept. of Applied Mechanics, Žilina,
Slovakia
13:00 – 13:45 L u n ch b r e a k
13:45 – 16:45 Section TECHNOLOGY AND APPLICATION
Chairmen: Bronislav Foller, Jan Orlt
Testing of sandwich structures and tram roofs in practice
Padovec Z., Doubrava K, Růžička M., ČVUT Praha, Faculty of mechanical engineering, CR
6sigma by force of structural bonding with MMA adhesives
Mayer Ch., Mayer & Mayer HandelsgmbH, Markt Allhau, Austria
AIREX – “We offer core solution”
Szilagyi S., Airex AG, Speciality Foams, Sins, Switzerland
Fly ash based thermoplastic composites
Pospíšil L., Křivánek J., Polymer Institute Brno, Czech Republic
Coffee break
Thermal behaviour of geocement composite
Kovářík T. 1, Kadlec J. 1, Rieger D. 1, Říha J. 1, Novotný P. 1, Kullová L. 1, Franče P. 2,
University of West Bohemia in Pilsen, NTC1, UUD2 Czech Republic
Pultrusion technology of inorganic matrix composites
Foller B1., Roubíček P2.
1
New Technology – Research Centre, University of West Bohemia in Pilsen, Czech Republic
2
České lupkové závody a.s., Nové Strašecí, Czech Republic
17:00
Transfer to Brewery House Černice (www.purkmistr.cz)
bus available (incl.stop at Hotel Victoria, dept. at 17:45)
18:00
Excursion in Brewery Černice with English guide, beer tasting
20:00
Evening party
(bus transport back to Hotel Victoria ensured)
Wednesday, May 29, 2013
9:00 – 12:00 Section MATERIALS, PROPERTIES, TESTING
Chairmen: Eva Nezbedová, František Socha
Informational value of selected methods of non-destructive material
testing to be applied on short-fibre reinforced polymer composites
and polymer nanocomposites
Lach R.1, Schoßig M.2,3, Bierögel Ch.4, Wolfgang Grellmann1,4
1
Polymer Service GmbH Merseburg, Germany
2
University of Applied Science Merseburg, Department of Engineering and Natural
Sciences, Germany
3
Institute of Polymer Materials, Merseburg, Germany
4
Martin-Luther University Halle-Wittenberg, Centre of Engineering, Halle (Saale), Germany
Polypropylene particulate composite – preparation, morphology
and mechanical properties
Nezbedová E.1, Krčma F.2, Pospíšil L.1, Lach R.3
1
Polymer Institute Brno, Czech Republic
2
Brno University of Technology, Czech Republic
3
Polymer Service GmbH, Merseburg, Germany
Experimental evaluation to characterize the shear deformation behaviour
of hybrid yarn based textiles
Hufenbach W., Maron B., Mertel A., Langkamp A., TU Dresden, Germany
Coffee
break
Evaluation of adhesion on fibre-matrix interface of polymer composites
with controlled interface using microindentic test
Knob A1, Babik A.1, Čech V1, Drzal L.T.2
1
Institute of chemical materials, Chemical faculty, VUT Brno, Czech Republic
2
Composite Materials and Structure Center, East Lansing, Michigan, USA
Composite materials of decreased flammability
Vavrečková D1., Rusnák V.2, Kotek I.1
1
SYNPO a.s., Pardubice, 2 FORM s.r.o., Horní Lideč, Czech Republic
12:00 – 12:45
L u n ch b r e a k
12:45 – 16:30 Section MATERIALS, PROPERTIES, TESTING
Chairmen: Eva Nezbedová, František Socha
SAERTEX – lightweight structural core for high performance sandwich
structures
Ščerba M., Saertex GmbH, Czech Republic
Monitoring of composite structure failures during loading process
Weis M., Aeronautic Institute, FSI -TU Brno, Czech Republic
Advanced testing of polymer composites by means of thermal analysis
Schmölzer S., NETZSCH-Gerätbau GmbH, Applications Laboratory, Selb, Germany
The new Perseus STA 449: Direct coupling of simultaneous thermal analysis
(STA) and Fourier-Transform-Infrared (FTIR) spectroscopy.
Schindler A.1, Neumann G.1, Rager A.2, Füglein E.1, Blumm J.1, Denner T.1
1
NETZSCH-Gerätbau GmbH, Applications Laboratory, Selb, Germany
2
BRUKER Optik GmbH, Ettlingen, Germany
Thermal diffusivity and thermal conductivity of polymer composites using
the laser flash technique
Stolbitzer D., Lindemann A., NETZSCH-Gerätbau GmbH, Applications Laboratory,
Selb, Germany
Advantage of the TG-GCMS-coupling in the polymer field
Fischer C., Füglein E., Post E., Hanss J., NETZSCH-Gerätbau GmbH, Applications Laboratory,
Selb, Germany
16:30
Close of the conference
During the conference there is a posibility to discuss issues with the
authors of the poster section and review the technical literature and
samples of exhibiting companies.
Poster Section
Presentation of NETZSCH Gerätebau
Giersing L., NETZSCH-Gerätbau GmbH, Applications Laboratory, Selb, Germany
Study of textile composites imperfections with basalt and carbon reinforcement
Salačová J., TU Liberec, Czech Republic
Change the properties of composite materials with polysiloxan matrix influenced
by curing temperature
Maršálková M., Grégr J., TU Liberec, Czech Republic
Methods of modeling and experimental measurement of polysiloxane based
ceramic matrix properties
Tomková B., Grégr J., Maršálková M., TU Liberec, Czech Republic
Glued joints titanium/polytetrafluorethylene
Podzimek J., VZLÚ Prague, Czech Republic
ORGANIZATION HINTS
Place and date
Pilsen-Borska pole, Plzeň Science and Technology Park, Teslova 3,
GPS: 49°43´25.66´´ S 13°20´12.53´´ V
April 27-28th, 2011
Conference languages:
Czech and English. Simultaneous translation is provided.
Accommodation:
The accommodation in the Hotel Victoria (www.hotel-victoria.cz)
In this case, guaranteed Conference room rate 975,-CZK for singles and 1425,-per
double room.
Participation fees:
The participation fee for a regular participant is 130 EUR
The participation fee includes:
x Conference proceedings
x Drinks and lunch during breaks
x Simultaneous translation
x Excursion in Pilsen Urquell and Evening party
We ask you to pay the participant fee on the account number until May 13th:
SWIFT address: KOMBCZPPXXX
IBAN CZ0401000000004845500267
Bank Code: 0100
Detail of payment: 614002
Beneficiary: Zapadoceska univerzita v Plzni, Univerzitni 8, 306 14 Plzen, Czech
Republic
Bank transfer to:
Komercni banka, a. s.
Na Prikope 33 /cp 969,
114 07 Praha 1, Czech Republic
In case of single or multiple-payment, it is necessary to put details of payment 614002
and your name in the payment order.
In special case it is possible to pay the participation fee cash (3200 CZK) by
registration.
Patriot - UltraMax - Advantage
stříkací zařízení pro polyesterové pryskyřice a
gelcoaty
injektážní zařízení pro technologie RTM, LRTM
revoluční řešení - PATRIOT - nejpřesnější dávkování
komponent
školení obsluh
příslušenství
servis a náhradní díly
oficiální zastoupení
STTA s.r.o.
Klestová 14, 312 00 Plzeň, [email protected], +420 606 612 344
Bringing strength on the road.
MULTIAXIALS
CLOSED MOULD
REINFORCEMENTS
MO
SSELF ADHESIVE FABRICS
KITTED-FABRICS
PREFORMS
COMPOSITE PARTS
WIN ENERGY | OFFSHORE
WIND
BO AND SHIPBUILDING
BOAT
RAILWAY
AUTOMOTIVE
AEROSPACE
PIPE RELINING
CIVIL ENGINEERING
RECREATION
SAERTEX worldwide
www.saertex.com
SAERTEX Germany
E-Mail: [email protected]
SAERTEX France
E-Mail: [email protected]
SAERTEX USA
E-Mail: [email protected]
SAERTEX India
E-Mail: [email protected]
SAERTEX Stade, Germany
E-Mail: [email protected]
SAERTEX Portugal
E-Mail: [email protected]
SAERTEX South Africa
E-Mail: [email protected]
SAERTEX China
E-Mail: [email protected]
OF
FOR THE
PARTNER
YOUR
TODAY
CHEMISTRY
TOMORROW
&
4,/FVNBOOB1BSEVCJDF$[FDI3FQVCMJD
UFMGBY
FNBJMTZOQP!TZOQPD[XXXTZOQPD[
4:/10BLDJPWgTQPMFkOPTU
5PMMNBOVGBDUVSJOHPGTQFDJBMUZ
H
ZFQ
QPYJFFTV
VSFUIB
BOFTT
QPMZFTUFSTBOEBDSZMJDT
PRODUC
"DDSFEJUFEUFTUJOHBOEBOBMZUJDDBMMBCP
PSBUUPSJJFT
TESTING
EVAL
LUATION
&
%FWFMPQJOHFOWJSPONFOUBMMZZSFTQP
POTJCMFQSP
PEVDUT
$PNCJOJOHDIFNJTUSJFTPGI
H
IZZCSSJETXJUUIQIZT
Q TJDT
PGDPNQPTJUFTJODMVEJOHOBO
OPDDPN
NQPTTJUFT
DEVELOP
RE
ESEARCH
ARCH
Hybridní tkaniny – kombinace vláken
Tkané skelné a rovingové pásky
Kombimateriály
UNIQUE Textiles, s.r.o.: Holešovská 166 763 16 Fryšták
Tel.: +420 577 912 861 Fax: +420 577 911 553 E-mail: [email protected] www.unique.cz
Sklotkaniny
Rovingové tkaniny
Skelné výztuže
UNIQUE TEXTILES, s.r.o. se zabývá výrobou
technických tkanin a výztuží zejména ze skleněného
vlákna pro využití v kompozitních materiálech.
® Registered trademark, Ashland or its subsidiaries, registered in various countries
™ Trademark, Ashland or its subsidiaries, registered in various countries
* Trademark owned by a third party
© 2012, Ashland
AD-11637
Ashland Is Your Trusted Partner
for Pultrusion Products
With good chemistry great things happen.™
Visit ashland.com to learn more or contact our
European sales team at [email protected].
Ashland’s products enable the manufacture of complex
profiles with high quality appearance and surface finish
while maximizing line speed, including our Envirez™ resins,
which contain a significant amount of renewable materials
offering a greener solution for your pultrusion products
without compromising resin quality!
Ashland’s resins are
t Weather, UV and corrosion resistant
t Adaptable to a variety of structural needs
t Compliant for many fire resistance solutions
Ashland offers a host of products designed for the
pultrusion process including Derakane™, Hetron™, Modar™
and Aropol™ resins.
LABIMEX CZ
ZZZODELPH[F]F]LQIR#ODELPH[F]ZZZTODEFRP
7(6729$&Ì.2025<352
6/81(ÿ1Ì6,08/$&($7(67<
2'2/1267,89=Éġ(1Ì
.RPRU\4681SURVOXQHĀQtVLPXODFH[HQRQRYìPVYďWOHP
s pevnou zkušební plochou nebo otoným karuselem
svtelné spektrum pro INDOOR a OUTDOOR zkoušky
regulace intenzity osvitu, teploty a relativní vlhkosti
možnost postiku vzork
vodou
Q- SUN – XE3 HS
Q- SUN XE1B
Q-SUN XE2
- 489WHVWHU\XOWUDILDORYìP]iĢHQtP
výbr spektra UV záení- lampy UVA, UVB, CW
možnost postiku vzork
vodou,
regulace intenzity osvitu, teploty
kondenzaní periody se 100% vlhkostí vzduchu
Poradenství, dodávky, servis, instalace, zaškolení,
kalibrace zajišuje:
QUV/SPRAY
/$%,0(;&=VUR
v R: Ing. Milan Pražák
Na Zámecké 11
140 00 Praha 4
[email protected]
00420 241 740 120
00420 602 366 407
v SR: Ing. Jozef Maco
Rakol´uby 697
916 31 Koovce
[email protected]
00421 327 798 346
00421 910 970 699
55. mezinárodní
strojírenský
veletrh
Měřicí, řídicí, automatizační
a regulační technika
MSV 2013
7.–11. 10. 2013
Br no – Výstaviště, w ww.bvv.cz/m sv
Záštita
Svaz průmyslu
a dopravy ČR
Ministerstvo
průmyslu a obchodu
Hospodářská
komora ČR
Veletrhy Brno, a.s.
Výstaviště 1
647 00 Brno
Tel.: +420 541 152 926
Fax: +420 541 153 044
[email protected]
www.bvv.cz/msv
… the ALL in ONE solution ...
Structural Adhesives // Engineering Adhesives
Dispensing Equipment // Accessories // Static Mixers
Mayer & Mayer HandelsgmbH
A-7411 Markt Allhau, Gewerbeweg 16
FN 279746, ATU 62683377
Phone:
Fax:
E-Mail:
+43-664-9682419
+43-664-779682419
[email protected]
ACRALOCK Structural Adhesives
by Engineered Bonding Solutions,
LLC, are advanced two component methacrylate structural adhesives, designed to bond chemically to
most surfaces, providing a permanently locked or integrated assembly of steel, aluminum, engineered
plastics, high performance composites and other materials.
The management team of Engineered Bonding Solutions, LLC
comprises well over 50 years of combined experience in the
composites and structural adhesives market. Our new
production facility, located on the Indian River waterway in
Titusville, Florida, features state of the art mixing, testing and
packaging equipment.
Acralock Structural Adhesives
are capable of bonding a wide range of
materials either to themselves or cross bonded to a dissimilar substrate, with little to no preparation.
Our patent pending formulations are designed to provide very tough and durable bonds with high
shear strength and elongation properties. This makes Acralock adhesives the best choice for
applications that need to withstand harsh environmental and shock load conditions. The rapid cure
nature of these adhesives at room temperature substantially decreases the assembly process time and
increase production.
Acralock Structural Adhesives
x
x
x
x
x
x
x
Chemically bonds to material surface
Combine high bond strength with choice of stiffness or flexibility
Bond most materials without grinding or priming
Include primerless Metal Bonder
Bond Telene and Hot Dipped Galvanized Steel
Combine fast cure with a choice of working time from 5 to 120 min
Give LOW Exotherm/LOW shrink/LESS read through
Acralock Structural Adhesives
Polyesters
Polyester Gelcoats
Topcoats
Vinyl Esters
Epoxies
Polyurethanes
Elastomers
Floatglas
Acrylics
ABS
PVC/FPVC/CPVC
Styrenics
PET
PMMA
Polycarbonate
Coated Floatglas
bond:
Poly DCPD (Telene)
SMC/BMC
PU - Rim
PA – RIM
Nylon
Rubbers
Wood
Concrete
www.acralock.com
Aluminum
Stainless Steel
Carbon Steel
Coated Metals
Hot Dipped Galvanized Steel
E - Galvanized Metals
Ceramics
Natural Stones