Specifications
Transkript
Specifications
C 316BEE Stereo Integrated Amplifier Our scene-stealing C 315BEE, an award-winning design that exceeded all expectations, has given rise to the C 316BEE Integrated Amplifier. The C 316BEE promises improved power efficiency, a healthy dose of ‘green’ attributes, and serious musical performance. The C 316BEE offers entry-level affordability and for many there will never be a need for another amplifier. With class-leading specifications for noise, distortion, power, stereo separation and volume control tracking, the C 316BEE sets new benchmarks for performance, both measured and audible. The sonic result is a relaxed and inviting sound that digs out the subtle details in your favourite recordings and presents them across a panoramic stereo sound stage. Features > Innovative Twist on Proven Technology > Dynamic Power Reserves Proprietary PowerDrive™ Circuit offers a remarkable Continuous power is a conservative 40 watts and dynamic combination of high current drive needed for complex power, which is more important for music listening, is loudspeaker loads combined with high levels of undistorted remarkably more than 100 watts! Far more usable power on dynamic power. Bjørn Erik Edvardsen, our Director of tap than other amps at this price point. Advanced Development, developed a simplified version of PowerDrive for the C 316BEE. > Keeping it Simple The C 316BEE has everything necessary for musical > Enviro Chic Thanks to its enjoyment, yet it is refreshingly limited to the essentials: innovative technology, standby power consumption is less than 1 watt. The C 316BEE uses lead-free six inputs, one set of speakers, a headphone jack and full function remote control. silver solder and is constructed free of hazardous materials. > Impressive Capacity > Budget-friendly While the C 316BEE embodies simplicity, it is far from a True to our enviable reputation for creating some of the ‘stripped down’ product. It is fully equipped to be the control best performing budget amplifiers of all time, the C 316BEE centre for a high performance music system. delivers huge performance without the huge price tag. 286.2mm C 316BEE Stereo Integrated Amplifier 79.8mm 286.2mm 79.8mm 435mm Features and Specifications Line Level Input Input impedance (R+C) Input sensitivity, rated power Maximum input signal Line level Output Tape Out impedance Treble Bass Continuous output power1 into 8Ω Rated Distortion (20Hz - 20kHz) Clipping power (maximum continuous power 4/8Ω) IHF Dynamic headroom 8Ω 4Ω IHF Dynamic power 8Ω 4Ω Damping factor (ref. 8Ω, 1kHz) Voltage gain Signal / Noise ratio, A-weighted2 THD + Noise3 SMPTE IM4 IHF IM5 Headphone output impedance Physical Specifications Gross Dimensions (W x H x D) Net Weight Shipping Weight C 316BEE 50kΩ + 100pF 200mV 7V Source Z + 600Ω ±5dB at 10kHz ±8dB at 100Hz 40W (16dBW) 0.01% 45W +3.5dB +4.8dB 90W (19.5dBW) 120W (20.8dBW) >200 (ref. 8Ω, 1kHz) 39dB 95dB (ref. 1W) <0.01% <0.02% <0.01% 68Ω 435 x 79.8 x 286.2 mm 5.52 kg 6.65 kg 1. Minimum power per channel, 20Hz - 20kHz, both channels driven with no more than rated distortion. 2. From CD input to speakers output, volume setting for 500mV in, 8Ω 1W out 3. Total harmonic distortion, 20Hz - 20kHz from 250mW to rated output 4. Intermodulation distortion, 60Hz - 7kHz, 4:1, from 250mW to rated output 5. CCIF IM distortion, 19kHz + 20kHz rated output Note: Installers should alow a minimum clearance of 55mm for wire / cable management. NAD Electronics International reserves the right to change specifications or features without notice. NAD is a registered trademark of NAD Electronics International. All rights reserved. No part of this publication may be reproduced, stored, or transmitted in any form whatsoever without the written permission of NAD Electronics International. © 02/2010 NAD Electronics International. www.NADelectronics.com